Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
Proven long-term corrosion monitoring in high-temperature environmentsIncrease operator efficiency and safety by minimizing plant downtimeReduce operational costs and enable predictive maintenanceHighest quality data integrity from sensor measurements
Continuous Monitoring inside boiler up to 400°C
Sub-mm wall thickness loss measurement over 6 months
Bespoke solution developed to meet client needs
Simple sensor install avoided impact on other shutdown works
Client has access to thickness measurements at all times
SimpleSmart
Sensor
Suitable for installation across a range of components including: water-cooledeconomizer, furnace waterwall, convection pass sidewall, screen tubing, heat
exchanger tubing, furnace tubes and transfer lines.
Benefits
Case StudyBelenus permanently installed in Gas Power Station
Applications
POWER GENERATION OIL & GAS NUCLEAR
Revision 1.4 - Feb 2021
Compact size: 50 x 32 x 20mm
0° UT Probe
Operating Temperature: -50°C to 400°C
Operating frequency: 10MHz
Multiple personnel have access to the same data remotely, enablingfaster decision making
Data Capture
Belenus Features
Predictive maintenance
Security
Collaboration
Alarm protocol enabled prior to equipment failure, reducing outagesand increasing efficiency
Data is securely stored in one centralised location and accessedthrough secure protocols
Revision 1.4 - Feb 2021
Assess the performance of the Belenus on your condition monitoringchallenge with an Evaluation Kit.
3 x Belenussensors
Get started with a box of 3 x Belenus sensors.
Put the Belenus to the Test
This kit contains 3 x Belenus sensors and a Flaw Detector enablingusers to instantly interrogate data.
3 x Belenussensors
Belenus Sensor Kit
Belenus Sensor Kit + Flaw Detector
Revision 1.4 - Feb 2021
BiocityBoNess RoadNewhouse, Scotland, UKML1 5UH
Contact
www.novosound.net
+44 (0) 1698 678419