Embed Size (px)
Citation preview
Seminar Protection & Diagnostic Testing Ruwais – Abu Dhabi, UAE
DOBLE ENGINEERING COMPANY
Dates 19th February 2017 Takreer Project Office Ruwais, Abu Dhabi, UAE
Moderator Mourad Hamdi | General Manager
Presenters
Syed Mudassir Pasha | Technical Sales Manager Mohammad Khalil | Technical Application Engineer
Michal Slodkiewicz | Technical Application Engineer
Uttam Mishra | Technical Application Engineer
In cooperation, with GASOS BIN HAMOODAH| Doble partner
Doble Engineering DMCC Platinum Tower, Office 2702 PO Box 643839 Jumeirah Lake Towers, Dubai - United Arab Emirates
T +971 42 775 483 F +971 42 775 482 E [email protected] www.doble.com
Seminar Protection & Diagnostic Testing Ruwais – Abu Dhabi, UAE
DOBLE ENGINEERING COMPANY
FEB 19TH, 2017
08:00 REGISTRATION AND RECEPTION All
08:30 PROGRAM START An introduction to the people at Doble Engineering and the Solutions and Services Syed Mudassir Pasha offered within the Middle East Region.
09:00 TRANSFORMER DIAGNOSTIC TESTING • What? • When and • Why to do this Test? • Basics and Theory • Different Applications – Doble Instruments • Analysis of Test Results • Factors Affecting Measurements • Case Studies
Mohammed Khalil
11:00 SHORT BREAK All
11:30 PROTECTION TESTING
The simple relays testing Uttam Mishra • Over-current • Frequency The complex relay testing • Line Impedance relays • Transformer protection relays
Secondary Injection of Impedance Element – Protection IED & F6150 Secondary Injection of Differential Element – Protection IED & F6150
13:30 LUNCH BREAK All
14:30
PARTIAL DISCHARGE • Introduction • Basic information, measurement principle • Measurements analysis and interpretation • Noise suppression - • Hardware and Software approach • PD measurements: in application, for
• Transformers, GIS / MV Switchgear, Generators, Motors & Cable Terminations and other HV assets
• Case Studies
Michal Slodkiewicz
16:30 ADDITIONAL QUESTION TIME & DAY FINISH All
Seminar Protection & Diagnostic Testing Ruwais – Abu Dhabi, UAE
DOBLE ENGINEERING COMPANY
Mourad Hamdi General Manager – Doble Engineering DMCC Mourad joined Doble Engineering in August 2012 with over nine years of experience in the transformer & switchgear manufacturer and utility sectors. Prior positions included Electrical Engineer at CNR-Electricité de France, Technical Sales for the South East at ABB France and Business Development Manager of After-Sales and Services at Milton Roy in Dubai. Mr. Hamdi has an Electrical Engineering Degree from Robert Doisneau University and a Master’s in Business Entrepreneurship from IDRAC Lyon Business School in France. Syed Mudassir Pasha Technical Sales Manager – Doble Engineering DMCC Syed Mudassir joined Doble Engineering in July 2016 with over nine years of experience in Inspection, Testing, Thermography, Condition monitoring of electrical assets like Transmission lines, Transformers, GIS, Motors, Generators, Cables etc. in the field of Power Plants, Utilities, Oil & Gas (Offshore & Onshore). Prior positions included Electrical Engineer at ABB - India, Technical Support Engineer at Taurus Powertronics Pvt. ltd. India. and Asst. Manager for Sales and Services at The Kanoo Group, Abu Dhabi. Uttam Mishra Technical Application Engineer on Protection Uttam Mishra is working as protection application engineer at Doble Engineering Company, India. He is graduate in Electrical Engineering. He has presented several papers in national and international conferences. He is working for protection software development and testing. He has more than 9 years of experience in power system studies, protection schemes, relay testing and application. Uttam is member of CIGRE and Institution of Engineers. Mohammed Khalil Technical Application Engineer on Transformers Mohamed Khalil received Bachelor, Master, and Doctorate degrees in electrical engineering. He worked as testing engineer for power transformers in power utilities and inspector for factory tests. He published numbers of papers in several conferences and journals on failure analysis of power transformers and reliability assessment of power equipment. Mohamed is a member in a number of IEEE committees and a guest editor for IEEE instrumentation and Measurement Magazine.
Michal Slodkiewicz Senior Product Support Engineer Partial Discharge Michal has a Master’s degree in Electrotechnics from the Silesian University of Technology in Gliwice, Poland. After graduation, he has worked as a commission-ing engineer where he participated in projects including commissioning of power plants. Michal joined Doble Engineering in 2011. He currently holds the position of Senior Product Support Engineer, responsible for worldwide support of Doble PD instruments, training and PD diagnostic services.
