Upload
trankhanh
View
216
Download
3
Embed Size (px)
Citation preview
SEMESTER – I
I Year B.E. / B.Tech.
GE 2115 COMPUTER PRACTICE LABORATORY – I
Requirements for a batch of 30 students
S.No. Description of Equipment Quantity required
Quantity available
Deficiency %
Hardware
1. LAN system with 33 nodes (OR) stand alone PCs 33 Nos.
2. Printer 3 Nos.
Software
1. Operating System Windows / Unix Clone
Available / Not Available
2. Compiler C compiler Available / Not Available
3. Application package Office suite Available / Not Available
SEMESTER – I
I Year B.E./ B.Tech.
GE 2116 Engineering Practices Laboratory
Requirements for a batch of 30 students
Sl.No. Description of Equipment Quantity required
Quantity available
Deficiency %
CIVIL
1.
Assorted components for plumbing consisting of metallic pipes, plastic pipes, flexible pipes, couplings, unions, elbows, plugs and other fittings.
15 sets
2. Carpentry vice (fitted to work bench) 15 No.
3. Standard woodworking tools 15 sets
4. Models of industrial trusses, door joints, furniture joints 5 each
5.
Power Tools: (a) Rotary Hammer (b) Demolition Hammer (c) Circular Saw (d) Planer (e) Hand Drilling Machine (f) Jigsaw
2 Nos 2 Nos 2 Nos 2 Nos 2 Nos 2 Nos
MECHANICAL
1. Arc welding transformer with cables and holders 5 No.
2. Welding booth with exhaust facility 5 No.
3. Welding accessories like welding shield, chipping hammer, wire brush, etc. 5 sets
4. Oxygen and acetylene gas cylinders, blow pipe and other welding outfit. 2 No.
5. Centre lathe 2 No.
6. Hearth furnace, anvil and smithy tools 2 sets
7. Moulding table, foundry tools 2 sets
8. Power Tool: Angle Grinder 2 Nos
9. Study-purpose items: centrifugal pump, air-conditioner One Each.
ELECTRICAL
1. Assorted electrical components for house wiring 15 sets
2. Electrical measuring instruments 10 sets
3. Study purpose items: Iron box, fan and regulator, emergency lamp One each
4. Megger (250V/500V) 1 No.
5. Power Tools:
(a) Range Finder (b) Digital Live-wire detector
2 Nos 2 Nos
ELECTRONICS
1. Soldering guns 10 No.
2. Assorted electronic components for making circuits 50 No.
3. Small PCBs 10 No.
4. Multi Meters 10 No.
5. Study purpose items: Telephone, FM radio, low-voltage power supply 2 each
SEMESTER – I
I Year B.E. / B.Tech.
PHYSICS & CHEMISTRY LABORATORY - I
Requirements for a batch of 30 students
Physics Laboratory
S.No. Description of Equipment Quantity required
Quantity available Deficiency %
1. Lees’ disc apparatus (With accessories) 5 Nos.
2. Air Wedge apparatus (With traveling microscopes and accessories)
5 Nos.
3. Spectrometer (With grating, prism and accessories) 5 Nos.
4.
Diode laser (2 mW power) or He-Ne laser (2mW) (Lycopodium powder, Optical fibre Kit and accessories)
5 Nos.
5. Ultrasonic interferometer (With accessories) 5 Nos.
6. B-H Curve traces apparatus 5 Nos.
Chemistry Laboratory
S.No. Description of Equipment Quantity required
Quantity available
Deficiency %
1. Electronic balance 1 No.
2. pH meter 8 Nos.
3. Conductivity bridge 8 Nos.
4. Potentiometer 8 Nos.
5. Platinum electrodes 8 Nos.
6. Calomel electrodes 8 Nos.
7. Spectrophotometer 1 No.
8. Flame photometer 1 No.
9. Oswald viscometer 15 Nos.
10. Glassware Sufficient Quantity
SEMESTER – II
I Year B.E. / B.Tech.
GE2155 COMPUTER PRACTICE LABORATORY - II
Requirements for a batch of 30 students
Sl.No. Description of Equipment Quantity required
Quantity available
Deficiency %
Hardware
1. UNIX Clone Server 1 No.
2. 33 Nodes (thin client or PCs) 33 Nos.
3. Printer 3 Nos.
Software
4. Operating System (33 user license or License free Linux) Unix Clone Available /
Not Available
5. Compiler C compiler Available / Not Available
SEMESTER – II
I Year B.E. / B.Tech.
GS2165 PHYSICS & CHEMISTRY LABORATORY - II
Requirements for a batch of 30 students
Physics Laboratory
Sl.No. Description of Equipment Quantity required
Quantity available Deficiency %
1. Torsional Pendulum apparatus (With accessories) 5 Nos.
2. Non-uniform Bending apparatus (With accessories) 5 Nos.
3. Viscosity (Poiseuille’s flow) apparatus (With accessories) 5 Nos.
4. Band gap apparatus/ Post office box 5 Nos.
5. Spectrometer (With grating, prism and accessories) 5 Nos.
6. Carey Foster Bridge 5 Nos.
Chemistry Laboratory
S.No. Description of Equipment Quantity required
Quantity available
Deficiency %
1. Electronic balance 1 No.
2. pH meter 8 Nos.
3. Conductivity bridge 8 Nos.
4. Potentiometer 8 Nos.
5. Platinum electrodes 8 Nos.
6. Calomel electrodes 8 Nos.
7. Spectrophotometer 1 No.
8. Flame photometer 1 No.
9. Oswald viscometer 15 Nos.
10. Glassware Sufficient Quantity
SEMESTER – II
I Year B. E. / B.Tech.
ME2155 Computer Aided Drafting and Modelling Laboratory
Requirements for a batch of 30 students
S. No. Description of Equipment Quantity Required
Quantity available Deficiency %
1. Pentium IV computer or better hardware, with suitable graphics facility
30 No.
2. Licensed software for Drafting and Modeling 30 licenses
3. Laser Printer or Plotter to print / plot drawings 2 No.
SEMESTER – III
Faculty of Mechanical Engineering
B. E. – Automobile Engineering
AT 2205 Automotive Components Laboratory
Requirement for a batch of 30 students
S. No. Description of Equipment Quantity
required Quantity available
Deficiency %
1. Multi Cylinder Petrol Engine 2 No.
2. Multi Cylinder Diesel Engine 2 No.
3. Petrol and Diesel fuel systems 2 No. each
4. Heavy duty vehicle chassis frame 1 No.
5. Light duty vehicle chassis frame 1No.
6. Front axle 2 No.
7. Rear axle 2 No.
8. Differential 2 No.
9. Clutch and Gear box 2 No. each
10. Steering Systems with different gearboxes 4 No.
SEMESTER – III
Faculty of Mechanical Engineering
B.E. – Automobile Engineering
AT 2207 Fluid Mechanics and Machinery Laboratory
Requirement for a batch of 30 students
S.No. Description of Equipment Quantity required
Quantity available
Deficiency %
1. Orifice meter setup Available/ Not available
2. Venturi meter setup Available/ Not available
3. Rotameter setup Available/ Not available
4. Pipe Flow analysis setup Available/ Not available
5. Centrifugal pump/submergible pump setup Available/
Not available
6. Reciprocating pump setup Available/ Not available
7. Gear pump setup Available/ Not available
8. Pelton wheel setup Available/ Not available
9. Francis turbine setup Kaplan turbine setup Available/
Not available
10. Wind tunnel with pressure measuring devices Available/
Not available
SEMESTER – III
Faculty of Mechanical Engineering
B. E. – Automobile Engineering
AT 2206 Manufacturing Technology Laboratory
Requirement for a batch of 30 students
S. No. Description of Equipment Quantity
required Quantity available
Deficiency %
1. Centre Lathe with accessories 5 No.
2. Shaping Machine 2 No.
3. Slotting Machine 1 No.
4. Radial Drilling Machine 2 No.
5. Upright Drilling Machine 2 No.
6. Milling Machine 2 No.
7. Cylindrical Grinding Machine 1 No.
SEMESTER – IV
Faculty of Mechanical Engineering
B. E. – Automobile Engineering
AT 2255 Engine Performance and Emission Testing Laboratory
Requirement for a batch of 30 students
S. No. Description of Equipment Quantity required
Quantity available
Deficiency %
1. Hydraulic dynamometer 1 No.
2. Eddy current dynamometer 1 No.
3. Electrical dynamometer 1 No.
4. Single cylinder two stroke cut section engine 1 No.
5. Single cylinder four stroke cut section engine 1 No.
6. Two-wheeler engine test rig 1 No.
7. Automotive multicylinder SI engine test rig with heat balance arrangement 1 No.
8. Automotive multicylinder CI engine test rig with heat balance arrangement 1 No.
9. Emission Measuring Instruments for Petrol 7 Diesel Engines 1 No. each
10. Piezo – Electric pick up, Charge Amplifier, Angle Encoder and PC 1 Set
SEMESTER – IV
Faculty of Mechanical Engineering
B. E. – Automobile Engineering
AT 2256 Computer Aided Machine Drawing Laboratory
Requirement for a batch of 30 students
S. No. Description of Equipment Quantity required
Quantity available
Deficiency %
1. Computer nodes 30 Nos.
2. Software like
i) AutoCAD ii) Pro-E
15 licenses
5 Nos.
SEMESTER – IV
Faculty of Mechanical Engineering
B. E. – Automobile Engineering
AT 2257 Electronics and Microprocessors Laboratory
Requirement for a batch of 30 students
S.No. Description of Equipment Quantity required
Quantity available
Deficiency %
1. Voltmeters 5 No.
2. Ammeters 5 No.
3. PN Diode, BJT, JFET, Logic Gates, Shift Registers and Counters 1 set.
4. Digital Logic Trainer Kits 1 No.
5. Breadboards 1 No.
6. Microprocessor Kits – 8085 5 No.
7. D/A Converter Interface 1 No.
8. Stepper Motor Interface 1 No.
9. CRO 1 No.
10. Waveform Generator 1 No.
11. Multimeter 1 No.
SEMESTER – IV
Faculty of Mechanical Engineering
B.E. – Automobile Engineering
ME 2256 Strength of Materials Laboratory
Requirement for a batch of 30 students
S. No. Description of Equipment Quantity
required Quantity available
Deficiency %
1. Universal Tensile Testing machine with double 1
2. Shear attachment – 40 Ton Capacity 1
3. Torsion Testing Machine (60 NM Capacity) 1
4. Impact Testing Machine (300 J Capacity) 1
5. Brinell Hardness Testing Machine 1
6. Rockwell Hardness Testing Machine 1
7. Spring Testing Machine for tensile and compressive loads (2500 N) 1
8. Metallurgical Microscopes 1
9. Muffle Furnace (800 °C) 3
SEMESTER – V
Faculty of Mechanical Engineering
B. E. Automobile Engineering (R2008)
AT 2308 Automotive Fuels and Lubricants Laboratory
Requirement for a batch of 30 students
S. No. Description of Equipment Quantity
required Quantity available
Deficiency %
1. Fuel Analysis Test Apparatus (for Ultimate and proximate analysis) 1 No.
2. Abels flash and fire point apparatus (for petrol) 1 No.
3. Aniline point Apparatus 1 No.
4. Reid vapor pressure test Apparatus 1 No.
5. Bomb and Gas Calorimeters 1 No.
6. Carbon Residue Test Apparatus 1 No.
7. Copper Strip Corrosion Test Apparatus 1 No.
8. Cloud and Pour point Apparatus 1 No.
9. Redwood Viscometer 1 No.
10. Saybolt Viscometer 1 No.
11. ASTM distillation test Apparatus 1 No.
12. Ash content Test Apparatus 1 No.
13. Drop point and penetration Apparatus for grease 1 No.
SEMESTER – V
Faculty of Mechanical Engineering
B. E. Automobile Engineering (R2008)
AT2307 Automotive Electrical and Electronics Laboratory
Requirement for a batch of 30 students
S. No. Description of Equipment Quantity
required Quantity available
Deficiency %
1. Battery, hydrometer, voltage tester 1 No.
2. Starter motor, regulator, cut-out 1 No.
3. Distributor, ignition coil, spark plug 1 No.
4. Auto electrical wiring system 1 No.
5. Rectifiers, filters 1 No.
6. Amplifier 1 No.
7. IC timer 1 No.
8. Data logger 1 No.
9. 8085 trainer kit 10 Nos.
10. ADC interface board 2 Nos.
11. DAC interface board 2 Nos.
12. Sensors like RTD, Load cell, LVDT 2 Nos.
13. Actuators like stepper motor 2 Nos.
SEMESTER – V
B.E./B.Tech. Courses (R 2008)
GE2321 Communication Skills Laboratory
(Requirement for a batch of 60 students)
Sl.No. Description of Equipment Quantity required
Quantity available Deficiency %
Server
o PIV system
o 1 GB RAM / 40 GB HDD
o OS: Win 2000 server o Audio card with headphones (with
mike)
1.
o JRE 1.3
1 No.
Client Systems
o PIII or above
o 256 or 512 MB RAM /40 GB HDD
o OS: Win 2000 o Audio card with headphones (with
mike)
2.
o JRE 1.3
60 No.
Softwares
a) Interactive Teacher Control Software Available / Not Available
b) English Language Lab Software Available / Not Available 3.
c) Career Lab software Available / Not Available
4. Handicam Video Camera (with video lights and mic input) 1 No.
5. Television - 29” 1 No.
6. Collar mike 1 No.
7. Cordless mikes 1 No.
8. Audio Mixer 1 No.
9. DVD Recorder / Player 1 No.
10. LCD Projector with MP3 /CD /DVD provision for audio / video facility - Desirable 1 No. Available / Not Available
SEMESTER – VI
Faculty of Mechanical Engineering
B. E. Automobile Engineering (R 2008)
AT 2354 - Computer Aided Engine Design Laboratory
(Requirement for a batch of 30 students)
S. No. Description of Equipment
Quantity required
Quantity available Deficiency %
1. Computer nodes 15 Nos.
2. Software like AutoCAD or Pro-E 15 licenses
SEMESTER – VI
Faculty of Mechanical Engineering
B. E. Automobile Engineering (R 2008)
AT2355 - Computer Aided Chassis Design Laboratory
(Requirement for a batch of 30 students)
S. No. Description of Equipment
Quantity required
Quantity available Deficiency %
1. Computer nodes 15 Nos.
2. Software like AutoCAD or Pro-E 15 licenses
SEMESTER – VI
Faculty of Mechanical Engineering
B. E. Automobile Engineering (R 2008)
AT 2356 - Two and Three Wheelers Laboratory
(Requirement for a batch of 30 students)
S. No. Description of Equipment Quantity required
Quantity available
Deficiency %
1. Two wheeler chassis dynamometer 1 No.
2. Coil spring test rig 1No.
3. Chain tension test rig 1No.
4. Shock absorber test rig 1 No.
5. Two-wheeler gearbox 2 Nos.
6. Two-wheeler clutch 2 Nos.
7. Three-wheeler brake assembly 2 Nos.
8. Three-wheeler steering assembly 2 Nos.
9. Three-wheeler gear box 2 Nos.
SEMESTER – VII
Faculty of Mechanical Engineering
B.E. – Automobile Engineering
AT 2405 – Vehicle Maintenance and Re-conditioning Laboratory
Requirement for a batch of 30 students
S.No. Description of Equipment Quantity required
Quantity available
Deficiency %
1. Engine Analyzer 1 No.
2. Cylinder compression pressure gauge 1 No.
3. Vacuum gauge 1 No.
4. Spark plug cleaner and tester 1 No.
5. Cam angle and rpm tester 1 No.
6. Tachometer 1 No.
7. Wheel alignment apparatus 1 No.
8. Gas welding equipment 1 No.
9. Tyre remover 1 No.
10. Bearing puller 1 No.
11. Head light alignment gauge 1 No.
12. Service manuals of petrol, diesel engines 1 No.
13. Cylinder reboring machine 1 No.
14. Valve grinding machine 1 No.
15. Valve lapping machine 1 No.
16. Fuel injection calibration test bench with nozzle tester- 1 No.
17. HRD tester, Clamp on meter, Hydrometer 1 No.
SEMESTER – VII
Faculty of Mechanical Engineering
B.E. – Automobile Engineering
ME 2309 – CAD and CAM Laboratory
Requirement for a batch of 30 students
S.No. Description of Equipment Quantity required
Quantity available
Deficiency %
HARDWARES
1. Computer server 1 No.
2. Computer nodes or systems (Pentium IV with 256MB Ram) networked to the server
15 No.
3. A3 size plotter 2 Nos.
4. Laser Printer 2 Nos.
5. Trainer CNC lathe 2 Nos.
6. Trainer CNC milling 2 Nos.
SOFTWARES
7. CAD/CAM Software (Pro –E or IDEAS or Unigraphics or CATIA)
15 licenses
8.
CAM Software (CNC programming and tool path simulation for FANUC, Sinumeric and Heiden controller)
15 licenses