What does this mean to you?

HD Digital Transport Adapter (DTA)

Remote Control - In order to operate the DTA you must use the remote control included with this kit. Programming instructions for the remote control are included in the kit.

Power Cord

HDMI Cable

Coax Cable

Remote Control Signal Receiver (IR Extender)IR Extender allows you to install your DTA in an unobtrusive location and control your DTA with a remote control.

Adhesive Mounting SquaresUse to mount DTA to your TV

What’s Included in this Install Kit?

What do I need to do?

Self Install Instructions - ImOn HD DTA

ImOn Communications continues to move towards an all digital cable TV platform by removing existing analog cable TV signals. This change will require each TV in a customer's home to either be equipped with an ImOn set-top box or utilize a digital tuner within the TV in order to continue to receive programming that is no longer available in analog format.

Channels that are moved from analog to digital format will have improved picture and sound quality giving you a better entertainment experience. Moving channels from analog to digital format also frees up bandwidth on ImOn's network to improve other services including more HD channels and additional Internet service capacity.

See the included channel lineup for the most up-to-date channel numbers and locations.

To continue to receive the channels changing from analog to digital format, you will need to install a DTA on each TV that does not currently have an ImOn set top or does not utilize a digital tuner within the TV.

Follow the simple steps in this instruction guide to install your DTA on or after October 21, 2015 in order to continue to access the following channels moving to digital format -

Destination America – channel 27 ESPN Classic – channel 32 Discovery Family Channel – channel 35 RFD-TV – channel 51 Oxygen – channel 53 Comedy.TV – channel 54 MAVTV – channel 59 PixL – channel 64 TCM – channel 70 Science – channel 85 HLN – channel 102

MyImOn.com/Digital298-6484

Front Panel - HD DTA

1. Power LED - Illuminates green when the DTA is powered on. Illuminates red when the DTA is in standby mode.

1. Cable In - Connects to the coax cable from the wall that delivers the signal from ImOn.

2. TV Out - Connects to the coax cable from the DTA to your TV.

3. IR In - Connects to the optional IR Remote Control Signal Extender.

4. Slide Switch - Can be set to either channel 3 or channel 4.

5. HDMI - Connects the HDMI cable from your HDTV to the HDMI port.

6. DC Power Input - Connects to the external power supply for the DTA.

Back Panel - HD DTA

Installing the DTA

1. Connect the coax cable coming from your wall outlet to the CABLE IN connection on your DTA. Make sure this connection is finger tight.

2. For the best HD picture quality, connect the HDMI cable (included in the kit) from the HDMI connection on your HDTV to the HDMI connection on your DTA.

-OR-

2. If you are not connecting the DTA to an HDTV, connect the coax cable included in the kit from the Cable In connection on your TV to the TV OUT connection on your DTA. Make sure the connection is finger tight.3. Slide the switch to channel 3.

HDTV Install

Other TVs Install

3. After connecting your TV to the DTA, plug the power cord into your DTA, then into an electrical outlet.

4. Press the POWER DTA and TV keys on the remote control included.

5 Press the Menu key to format your TV screen.For a HDTV select HDMI and 1080i, then select SCREEN and Stretch.

MyImOn.com/Digital298-6484

Connecting the Optional IR Remote Control Signal Extender

Programming Your Remote Control

The IR Extender allows you to install your DTA in an unobtrusive location, such as a cabinet, and control your DTA with a remote control.

1. Plug the IR Extender into the IR IN port on the back of your DTA.2. Peel the paper backing from the adhesive pad on the bottom of the IR Extender receiver. Mount the IR Extender receiver so nothing is blocking the sensor on the front of the receiver. You must be able to point the remote control at the sensor.

Your remote is initially programmed to control your DTA only. If you would like to program the remote to control your TV too, follow the Remote Guide instructions included in this kit.

FAQs

What is “Analog” and why the switch to Digital?“Analog” refers to the type of cable TV signal that comes into your home. Analog technology does not require equipment to decode its signal. It is an older technol-ogy that some televisions still use today, although most new televisions sold over the last few years use Digital/HD technology. The old analog signal uses valuable bandwidth. In order to add more services and technology we need to recover that bandwidth on our network. Why is the upgrade happening now?With the increasing number of HDTVs in homes and HD programming from TV networks and other providers, upgrading from analog to digital will enable us to offer more programming choices and better picture quality. Also, the upgrade frees up more network bandwidth to meet the needs of Internet customers as well.Who does this affect?This upgrade will affect ImOn Local Plus customers or Digital cable TV customers who have a television currently connected directly to coax cable, without an ImOn set top box/cable card or digital tuner within the TV. What if I do nothing? If you don't take action, any TV you currently have connected directly to cable TV without an ImOn set top box, cable card or TV with digital tuner, will lose the sig-nal to the 11 channels changing from analog to digital on October 21st. If you have a set top box connected to your TV, you do not have to do anything. If you have a digital tuner TV you will need to rescan your TV on or after October 21st in order to pick up the new manual tune channel numbers. Will the DTA box contain an on screen program guide? No, the DTA does not include a program guide. You can access guide information-through the TV Guide Channel - ImOn channel 5. You can also download the TV Guide app to your smartphone and select ImOn as your provider .

How much does an HD DTA cost?HD DTAs are $4.98/mo with the first 12 months free.

Will the channel lineup change?The only change to the channel numbers will be the manual tune lineup. On October 21st the manual tune channels will be updated to reflect a more simple numbering convention. Refer to the channel lineup included in this kit for a listing of the new manual tune channel numbers effective October 21st.

Visit MyImOn.com/Digital for more tools and a current channel lineup

MyImOn.com/Digital298-6484