12
1 Linear Technology Selection guide 11/2016

Selection guide Linear Technology - Amazon S3€¦ · many applications of drive and linear technology to give you a complete over - view of RK products. CAD-component library (Part

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

1

Linear TechnologySelection guide

11/2

016

2

Reliable movements

Guiding, adjustment, positioning or uniform motion, the requirements for linear motion operations are as numerous as the solutions. We offer you a wide spec-trum of linear motion components, starting with an occasional manual movement, as well as frequent operation, through to continuous high dynamic po-sitioning.

In order for you to preselect the most suitable range quick and easy, we have developed a system which is strictly application orientated. You can determine the most suitable size and design based on your perfor-mance requirements from within the range.We are always here, of course, to assist you personally with your selection.

Why try for so long…

…when it‘s quicker with our system

3

The four steps to your product recommendation

The application is always the focus

• Width, length and height adjustment• Loading and unloading, palletising, pick & place• Numerically controlled operation tasks

Which product design do you want?

• Rodless style (Linear actuator)• Rodstyle (E-cylinder, lifting column)

What features should the product have?

• Guide• Drive• Guide + drive

Which performance category do you require?

• Travel• Load• Speed• Accuracy• etc.

…follow our system and the terms are self explanatory.

Step 1:

Step 2:

Step 3:

Step 4:

4

Your appli cation takes centr e stage

The RK Linear Circle

Features:

9Manual or electric drive

9Occasional to daily multiple adjustment

9 Low duty cycle

9 Low speed

9Moderate to high stability

Place-Teccontinue on page 8

Move-Teccontinue on page 6

Width, length, height adjustment

5

Your appli cation takes centr e stage

Features:

9High repeatability

9 Short cycle time

9High number of cycles

93-shift operation

9High reliability

Features:

9High positioning accuracy

9Uniform motion

9High drive stiffness

93 shift operation

9 IP40 protected

Place-Teccontinue on page 8

Control-Teccontinue on page 10

Loading and unloading, palletising, pick & place

Numerically controlled travel

6

Move-Tec Width, length and height adjustment

RK LightUnitTravel max: 920 mmFx max: 300 NFy max: 550 NFz max: 1,210 N

ETravel max: 2,740 mmFx max: 4,500 NFy max: 5,500 NFz max: 5,650 N

EP(X)Travel max: 2760 mmFx max: 4,500 NFy max: 14,000 NFz max: 9,100 N

RETravel max: 3,000 mmFy max: 600 NFz max: 2,400 N

Twin tube guides

Twin tube actuators

Cylinder performance class 2

Single tube actuator

Cylinder performance class 1

Two-stage lifting columns

M9 E-cylinderTravel: 50 mmFd max: 300 NFz max: 300 NVmax: 14 mm/s

010 E-cylinderTravel max 100 mmFd max: 500 NFz max: 500 NVmax: 22 mm/s

015 E-cylinderTravel max 140 mmFd max: 1,000 NFz max: 1,000 NVmax: 100 mm/s

MultiliftTravel max: 498 mmFd max: 3,000 NFz max: 1,000 NVmax: 16 mm/s

RK SlimliftTravel max: 500 mmFd max: 4,000 NFz max: 2,000 NVmax: 32 mm/s

Multilift IITravel max: 497 mmFd max: 3,000 NFz max: 3,000 NVmax: 16 mm/s

7

PLMTravel max: 855 mmFx max: 125 NFy max: 200 NFz max: 220 N

RK CompactTravel max: 400 mmFx max: 215 NFy max: 1,150 NFz max: 1,150 N

quad® EVTravel max: 2,850 mmFx max: 2,500 NFy max: 6,000 NFz max: 6,000 N

COPASTravel max: 2,250 mmFx max: 1,600 NFy max: 3,500 NFz max: 5,200 N

PLSTravel max: 3,000 mmFx max: 3,050 NFy max: 2,550 NFz max: 2,550 N

RK DuoLine STravel max: 2,984 mmFx max: 3,400 NFy max: 5,000 NFz max: 6,000 N

RCTravel max: 2,250 mmFy max: 3500 NFz max: 5,200 N

PLTravel max: 5,860 mmFy max: 2,550 NFz max: 2,550 N

RK DuoLine RTravel max: 7,692 mmFy max: 5,100 NFz max: 8,900 N

PLM-GTravel max: 2,935 mmFy max: 200 NFz max: 220 N

RK Compact-GTravel max: 400 mmFy max: 1,150 NFz max: 1,150 N

SQLTravel max: 5,750 mmFy max: 2,500 NFz max: 1,500 N

Twin tube guides

Twin tube actuators

Cylinder performance class 2

Multiple-stage lifting columns Two-stage lifting columns

Profile guides

Profile actuators

Heavy load cylinder

LAMBDA E-cylinderTravel max: 600 mmFd max: 6,000 NFz max: 4,000 NVmax: 21 mm/s

LZ 60 E-cylinderTravel max: 597 mmFd max: 4,000 NFz max: 4,000 NVmax: 85 mm/s

SLZ 63 TR FL/PL E-cylinderTravel max: 1,005 mmFd max: 15,000 NFz max: 15,000 NVmax: 58 mm/s

LZ 80 E-cylinderTravel max: 1,005 mmFd max: 10,000 NFz max: 10,000 NVmax: 25 mm/s

SLZ 90 E-cylinderTravel max: 2,000 mmFd max: 25,000 NFz max: 25,000 NVmax: 77 mm/s

LZ 70 TR PL E-cylinderTravel max: 1.000 mmFd max: 5,000 NFz max: 5,000 NVmax: 48 mm/s

RK Powerlift Travel max: 500 mm Fd max: 3,000 NFz max: 1,500 N Vmax: 50 mm/s

Alpha ColonneTravel max: 700 mmFd max: 3,000 NFz max: 3,000 NVmax: 18 mm/s

LAMBDA ColonneTravel max: 600 mmFd max: 4,500 NFz max: 4,500 NVmax: 20 mm/s

RK Powerlift telescopeTravel max: 650 mmFd max: 1,600 NFz max: 800 NVmax: 30 mm/s

RK Multilift II telescopeTravel max: 650 mmFd max: 1,600 NFz max: 800 NVmax: 30 mm/s

For detailed information, sizing, accessories,

motors and controls please look in

our main catalogue ‚Linear Technology‘

8

Place-Tec Loading and unloading, palletising, pick & place

PLZTravel max: 5,808 mmFx max: 2,810 NFy max: 2,550 NFz max: 2,550 Nv max: 10 m/sa max: 20 m/s²Repeatability ± 0,05 mm

PLTravel max: 5,860 mmFy max: 2,550 NFz max: 2,550 Nv max: 10 m/s a max: 20 m/s²

SQZTravel max: 5,898 mmFx max: 2,810 NFy max: 2,550 NFz max: 2,550 Nv max: 10 m/sa max: 20 m/s²Repeatability ± 0,05 mm

SQTravel max: 5,850 mmFy max: 2,550 NFz max: 2,550 Nv max: 10 m/s a max: 20 m/s²

SQ MTTravel max: 17,446 mmFx max: 2,810 NFy max: 2,550 NFz max: 2,550 Nv max: 10 m/sa max: 20 m/s²Repeatability ± 0,05 mm

SQ ZSTTravel max: 29,530 mmFx max: 1,132 NFy max: 2,550 NFz max: 2,550 Nv max: 5 m/sa max: 20 m/s²Repeatability ± 0,05 mm

Roller guides

Roller guide actuators

Roller guide actuators

RK MonoLineTravel max: 5,780 mmFy max: 4,367 NFz max: 2,509 Nv max: 10 m/s a max: 20 m/s²

RK MonoLineTravel max: 5,780 mmFx max: 2,600 NFy max: 4,367 NFz max: 2,509 Nv max: 10 m/s a max: 20 m/s²Repeatability ± 0,05 mm

9

LMZTravel max: 5,700 mmFx max: 3,400 NFy max: 7,000 NFz max: 7,000 Nv max: 10 m/sa max: 20 m/s²Repeatability ± 0,05 mm

LMTravel max: 5,670 mmFy max: 7,000 NFz max: 7,000 Nv max: 10 m/s a max: 20 m/s²

RK DuoLine ZTravel max: 9,010 mmFx max: 6,000 NFy max: 5,100 NFz max: 8,900 Nv max: 5 m/sa max: 50 m/s²Repeatability ± 0,05 mm

RK DuoLine RTravel max: 7,692 mmFy max: 5,100 NFz max: 8,900 Nv max: 5 m/s a max: 50 m/s²

MultiLineTravel max: 5,620 mmFx max: 4,700 NFy max: 10,000 NFz max: 10,000 Nv max: 5 m/sa max: 50 m/s²Repeatability ± 0,05 mm

MultiLine RTravel max: 5,620 mmFy max: 10,000 NFz max: 10,000 Nv max: 5 m/s a max: 50 m/s²

D-Line (on request)Travel max: 50,000 mmFx max: 4,700 NFy max: 10,000 NFz max: 10,000 Nv max: 5 m/sa max: 50 m/s²Repeatability ± 0,1 mm

Roller guides

Roller guide actuators

Ball return guides

Ball return rails actuatorsHeavy dutyactuators

For detailed information, sizing, accessories,

motors and controls please look in

our main catalogue ‚Linear Technology‘

10

DuoLine S Travel max: 4,440 mmFx max: 8,000 NFy max: 5,100 NFz max: 8,900 NMx max: 500 NmMy max: 1,200 NmMz max: 1,150 Nmv max: 2.5 m/sa max: 20 m/s²Positioning ability ± 0,05 mm

Ball return rails actuators

Heavy load cylinder

Control-Tec Numerically controlled travel

LZ 70 FL/PL E-cylinderTravel max: 1,000 mmFd max: 5,000 NFz max: 5,000 Nv max: 1.000 mm/sPositioning accuracy ± 0,05 mm

SLZ 63 KG FL/PL E-cylinderTravel max: 1,000 mmFd max: 10,000 NFz max: 10,000 Nv max: 1,250 mm/sPositioning accuracy ± 0,05 mm

SLZ 90 E-cylinderTravel max: 1.900 mmFd max: 25,000 NFz max: 25,000 Nv max: 933 mm/sPositioning accuracy ± 0,1 mm

For detailed information, sizing, accessories, motors and controls please look in our main catalogue ‚Linear Technology‘

RK DuoLine RTravel max: 7,692 mmFy max: 5,100 NFz max: 8,900 Nv max: 5 m/s a max: 50 m/s²

Ball return guides

11

Our service

RK-Infomobile – the exhibition at your location

Over 20 presentation boards with exhibits and functional examples, as well as

many applications of drive and linear technology to give you a complete over-

view of RK products.

CAD-component library (Part server)

To support your design work we offer component data free of charge in the

Rose+Krieger-component library (drawings, technical descriptions).

About 60 different file formats (2D/3D) can be selected here.

RK-website

On our website you will find lots of information about our company and our

products . You will also find your contact partner in your area and the latest

catalogue data (in PDF format) to download.

www.rk-rose-krieger.com

What we can do for you:

Do you need to focus your resources on other tasks and are you looking for a competent partner you can rely on? Working in close collaboration with you, our specialists will develop solutions tailor-made to meet your needs. If you wish, we can also assemble and commission the units on site.

Just make a sketch of your requirements

We can deliver your turnkey solution or assemble and commission it for you on site

Our product specialists will devise a solution for you

RK-Field service - Advice on site

Our Key Account managers and sales consultants are happy to visit you on site and help you draw up concrete proposals for practical solutions.

12EN

1.0

00 F

lyer

alar

m M

AR

12

71 1

5 00

01 1

1/20

15 P

rin

ted

in G

erm

any

Postfach 15 64D-32375 MindenTel.: +49 5 71 93 35-0Fax: +49 5 71 93 [email protected]