SEL ECTION G U I D E - Flexible Moulding and · PDF fileSEL ECTION G U I D E CovcxSS 1CMW_Singles.indd 1 9/18/08 9:30:51 AM3/19/12 10:38 AM 4264 Old Linwood Road Lin wo od, NC 27299

S E L E C T I O N G U I D E

CovcxSS 1 9/18/08 9:30:51 AMCMW_Singles.indd 1 3/19/12 10:38 AM

4 2 6 4 O l d L i n w o o d R o a d L i n w o o d , N C 2 7 2 9 9

Visit www.flextrim.com for More Profiles

CMW_SinglesFinal.indd 1 3/19/12 2:10 PMCMW_SinglesFinal_Brown.indd 1 3/23/15 8:40 AM

060330 CMW SS 9/17/08 1:25 PM Page 2 C M Y CM MY CY CMY K

3

MADE TO MATCH

Ordering InformationWe are always happy to help you with any specification questions before you enter your order.

These are some commonly requested configurations and typical information we need for production.

HALF ROUND

ELLIPSES OR

OVALS

RADIUS CROWN MOULDINGS

HEIGHT OR

RADIUS

(DIAMETER)WIDTH

ARCS OR EYEBROWSRISE

TEMPLATE REQUIRED(WE HAVE SOME STANDARD TEMPLATES)

CONVEX OR

OSR

CONCAVE ORISR

Please provide a radius dimension of wall or width of unit and how much the wall or ceiling recesses (ISR) or projects (OSR).

NOTE: Curved ceilings or dormers (Barrel Vaults) are convex or OSR applications. Please specify at time of order.

IMPORTANT: Straight (lineal, non pre-radiused) pieces will only be suitable for certain applications. Please call us with any information to insure appropriate

material is ordered and provided.

The drawings shown in this book are a reference and may be different than actual mouldings produced.

Installation and care instructions for on page 4. “S” items are in stock

Forbuilders and designers

who appreciate the architectural prominence and beauty of moulding,

Carter Millwork, Inc. has become the solution for both small and large installations.Whether the need is one uniquely designedstyle or hundreds of feet with optimum

consistency, we satisfy the demand with quality assured mouldings. Each piece is individually

inspected to provide the highest quality control.Here are features that make CarterFlex oneof the most desired moulding products in

the building industry.• MATERIALS

Polyurethane Composite Material• WARRANTY Lifetime warranty for products • MOULDING SIZES

Same sizes as wood• FLEXIBILITY

6 standard sizes cover 1/8 to 7/0 Half Round• FINISHING

Accepts paint or stain• MACHINING

Use same tools as wood• STRENGTH

Heat - Minimal Effect Cold - Minimal Effect

• VALUELow cost with excellent performance

Carter Millwork has maintained a leadership role by helping artisans create their vision through moulding replications.

Our Made-To-Match process (MTM), gives Carter Millwork the unique opportunity to match any style our customers wish to replicate. Throughthis process, our skills and technology allow us to reproduce the most intricate and minimal moulding designs provided for replication.

By working with our skilled order specialists, we can fashion radius pieces to match your original samples. Typically, we create 12 ft. molds of the samples that you send. We replicatethe moulding to fit your templates and specifications. We can ship both straight and curved mouldings to fit your project needs.

Because we give each order specialattention, we have a reputation ofexceeding industry delivery standards. We stock many profiles so that we can provide accelerated delivery. Many ofthese items are marked with an “S” in this guide; however, we have many more designs that may fit your ideas. We can search our inventory ofmouldings using a small moulding piece or your tracing as reference. No order is too large or too small. Call us.

1-800-861-0734

WIDTHLEG

HEIGHT

We are available to provide any ordering informationor answer any questions Monday through Friday.

You may order by calling 1-800-861-0734 or sendingfaxes to 1-800-861-0737.

We ship all orders Prepaid and delivery of StockItems is made within one or two days for UPS

shipments. We schedule regular deliveries with common carriers for larger orders.

2

CMW_Singles.indd 2 3/19/12 10:38 AMCMW_SinglesFinal.indd 2 3/19/12 2:10 PMCMW_SinglesFinal_Brown.indd 2 3/23/15 8:40 AM


3

MADE TO MATCH

Ordering InformationWe are always happy to help you with any specification questions before you enter your order.

These are some commonly requested configurations and typical information we need for production.

HALF ROUND

ELLIPSES OR

OVALS

RADIUS CROWN MOULDINGS

HEIGHT OR

RADIUS

(DIAMETER)WIDTH

ARCS OR EYEBROWSRISE

TEMPLATE REQUIRED(WE HAVE SOME STANDARD TEMPLATES)

CONVEX OR

OSR

CONCAVE ORISR

Please provide a radius dimension of wall or width of unit and how much the wall or ceiling recesses (ISR) or projects (OSR).

NOTE: Curved ceilings or dormers (Barrel Vaults) are convex or OSR applications. Please specify at time of order.

IMPORTANT: Straight (lineal, non pre-radiused) pieces will only be suitable for certain applications. Please call us with any information to insure appropriate

material is ordered and provided.

The drawings shown in this book are a reference and may be different than actual mouldings produced.

Installation and care instructions for on page 4. “S” items are in stock

Forbuilders and designers

who appreciate the architecturalprominence and beauty of moulding,

Carter Millwork, Inc. has become thesolution for both small and large installations.Whether the need is one uniquely designedstyle or hundreds of feet with optimum

consistency, we satisfy the demand with qualityassured mouldings. Each piece is individually

inspected to provide the highest quality control.Here are features that make CarterFlex oneof the most desired moulding products in

the building industry.• MATERIALS

Polyurethane Composite Material• WARRANTY Lifetime warranty for products• MOULDING SIZES

Same sizes as wood• FLEXIBILITY

6 standard sizes cover 1/8 to 7/0 Half Round• FINISHING

Accepts paint or stain• MACHINING

Use same tools as wood• STRENGTH

Heat - Minimal EffectCold - Minimal Effect

• VALUELow cost with excellent performance

Carter Millwork has maintained aleadership role by helping artisanscreate their vision through mouldingreplications.

Our Made-To-Match process (MTM),gives Carter Millwork the uniqueopportunity to match any style ourcustomers wish to replicate. Throughthis process, our skills and technologyallow us to reproduce the most intricateand minimal moulding designs providedfor replication.

By working with our skilled orderspecialists, we can fashion radius piecesto match your original samples.Typically, we create 12 ft. molds of thesamples that you send. We replicatethe moulding to fit your templates andspecifications. We can ship both straightand curved mouldings to fit your projectneeds.

Because we give each order specialattention, we have a reputation ofexceeding industry delivery standards.We stock many profiles so that we canprovide accelerated delivery. Many ofthese items are marked with an “S” inthis guide; however, we have manymore designs that may fit your ideas.We can search our inventory ofmouldings using a small moulding pieceor your tracing as reference. No orderis too large or too small. Call us.

1-800-861-0734

WIDTHLEG

HEIGHT

We are available to provide any ordering informationor answer any questions Monday through Friday.

You may order by calling 1-800-861-0734 or sendingfaxes to 1-800-861-0737.

We ship all orders Prepaid and delivery of StockItems is made within one or two days for UPS

shipments. We schedule regular deliveries with commoncarriers for larger orders.

2



INSTALLATION

TO AVOID DAMAGE DO NOT NAILCLOSER THAN 3/8 IN. FROM EDGE

CM35611/16 X 21/4 in.

S

CM36611/16 X 21/4 in.

S

S CM44511/16 X 31/4 in.

S

CM44411/16 X 31/4 in.

S

CM37611/16 X 21/4 in.

CM444A11/16 X 31/2 in.

CM47011/16 X 311/16 in.

S

CM44211/16 X 21/4 in.

S

CM111/16 X 31/2 in.

S

CM9711/16 X 31/2 in.

S

USE:This flexible moulding is designed for interior and exterior use. This product is stable andwill not absorb moisture. However, the use of a paint or gel stain and sealer is recommended for all applications.

MACHININGConventional woodworking tools can be used with this material. Material can be cut, sanded and shaped with ease. Miter saws work wellwhen trimming this material. As with all types of trim material, use care when marking and cutting.

FASTENINGAlways install moulding material in a relaxed position. Use construction or panel adhesiveor mastic type glue continuously on back side and nails to secure moulding material in place until adhesive bonds.

• DO NOT use staples to fasten material. • Keep nails to a minimum, no closer than

6” between nails.• Do not nail closer than 3/8” from edge of

moulding.

CLEANINGPrior to finishing, clean the moulding by wiping with a cloth using soap and water, paint thinner or any mild solvent to clean any dirt or grease that may have accumulated during installation.

PAINT & STAININGAll CARTERFLEX material is paint grade and most profiles have grain and can be stained. Inspect for grain or call for information on compatibility of staining. Staining of CARTERFLEX material requires the use of a gel type stain.

LIFETIME WARRANTY

Carter Millwork, Inc. warrants that for the “lifetime” ownership, the CARTERFLEX moulding is free from defects in materialand workmanship. “Lifetime” means as long as the original purchaser owns the structure to which the CARTERFLEX moulding hasbeen properly attached. Carter Millwork,Inc. will repair or replace at its option any CARTERFLEX moulding that has failed as a result of defective material and workmanship. This remedy is the purchaser’s exclusive remedy for breach of warranty hereunder.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

At no time will Carter Millwork, Inc. be liable for more than the original purchase price of the moulding, nor will Carter Millwork, Inc. be liable for any special,incidental or consequential damages based upon breach of warranty, breach of contract, loss of profits, loss of savings or revenue,loss of use, the claims of third parties and injury to property. Some states do not allow limits on warranties or on remedies forbreach in certain transactions. In such states, the limits in this paragraph and the preceding paragraph may not apply.

It shall remain the responsibility of the customer to insure that the moulding purchased is designed for their particular installation.

CARTER MILLWORK, INC.5

MADE TO MATCH


Many more profiles available, call...1-800-861-0734 • FAX 1-800-861-0737

CASINGS



INSTALLATION

TO AVOID DAMAGE DO NOT NAILCLOSER THAN 3/8 IN. FROM EDGE

CM35611/16 X 21/4 in.

S

CM36611/16 X 21/4 in.

S

S CM44511/16 X 31/4 in.

S

CM44411/16 X 31/4 in.

S

CM37611/16 X 21/4 in.

CM444A11/16 X 31/2 in.

CM47011/16 X 311/16 in.

S

CM44211/16 X 21/4 in.

S

CM111/16 X 31/2 in.

S

CM9711/16 X 31/2 in.

S

USE:This flexible moulding is designed for interior and exterior use. This product is stable andwill not absorb moisture. However, the use of a paint or gel stain and sealer is recommended for all applications.

MACHININGConventional woodworking tools can be used with this material. Material can be cut, sanded and shaped with ease. Miter saws work wellwhen trimming this material. As with all types of trim material, use care when marking and cutting.

FASTENINGAlways install moulding material in a relaxed position. Use construction or panel adhesiveor mastic type glue continuously on back side and nails to secure moulding material in place until adhesive bonds.

• DO NOT use staples to fasten material. • Keep nails to a minimum, no closer than

6” between nails.• Do not nail closer than 3/8” from edge of

moulding.

CLEANINGPrior to finishing, clean the moulding by wiping with a cloth using soap and water, paint thinner or any mild solvent to clean any dirt or grease that may have accumulated during installation.

PAINT & STAININGAll CARTERFLEX material is paint grade and most profiles have grain and can be stained. Inspect for grain or call for information on compatibility of staining. Staining of CARTERFLEX material requires the use of a gel type stain.

LIFETIME WARRANTY

Carter Millwork, Inc. warrants that for the “lifetime” ownership, the CARTERFLEX moulding is free from defects in materialand workmanship. “Lifetime” means as long as the original purchaser owns the structure to which the CARTERFLEX moulding hasbeen properly attached. Carter Millwork,Inc. will repair or replace at its option any CARTERFLEX moulding that has failed as a result of defective material and workmanship. This remedy is the purchaser’s exclusive remedy for breach of warranty hereunder.

THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

At no time will Carter Millwork, Inc. be liable for more than the original purchase price of the moulding, nor will Carter Millwork, Inc. be liable for any special,incidental or consequential damages based upon breach of warranty, breach of contract, loss of profits, loss of savings or revenue,loss of use, the claims of third parties and injury to property. Some states do not allow limits on warranties or on remedies forbreach in certain transactions. In such states, the limits in this paragraph and the preceding paragraph may not apply.

It shall remain the responsibility of the customer to insure that the moulding purchased is designed for their particular installation.


MADE TO MATCH



CASINGS

CMW_Singles.indd 5 3/19/12 10:38 AM

(WM356)

(WM445)

(WM376)

(EC470)

(EC001)

(EC020)

(EC442)

(WM444)

(EC444)

(WM366)



SM58063/4 X 51/2 in.

CNF5253/4 X 51/4 in.

C606R11/16 X 51/2 in.

SM753/4 X 51/2 in.

SM853/4 X 51/4 in.

C606F11/16 X 51/2 in.

C600R11/16 X 31/2 in.

10029/16 X 39/16 in.

CNF3123/4 X 37/16 in.

CCC3503/4 X 37/16 in.

1002M1/2 X 21/4 in.

PT338R5/8 X 33/8 in.

PT338F5/8 X 33/8 in.

CM14R11/16 X 31/4 in.

SM83/4 X 5in.

S

CM14F11/16 X 31/4 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CASINGSCASINGS



SM58063/4 X 51/2 in.

CNF5253/4 X 51/4 in.

C606R11/16 X 51/2 in.

SM753/4 X 51/2 in.

SM853/4 X 51/4 in.

C606F11/16 X 51/2 in.

C600R11/16 X 31/2 in.

10029/16 X 39/16 in.

CNF3123/4 X 37/16 in.

CCC3503/4 X 37/16 in.

1002M1/2 X 21/4 in.

PT338R5/8 X 33/8 in.

PT338F5/8 X 33/8 in.

CM14R11/16 X 31/4 in.

SM83/4 X 5in.

S

CM14F11/16 X 31/4 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CASINGSCASINGS


(EC14R) (EC14F)



SM711/16 X 41/2 in.

CM32711/16 X 21/4 in.

CKR3503/4 X 31/2 in.

PM71911/16 X 31/2 in.

CBG2753/4 X 23/4 in.

CAS5013/4 X 21/2 in.

CKN4253/4 X 41/4 in.

WM35111/16 X 21/2 in.

NH2347/8 X 23/4 in.

CM37111/16 X 3in.

MD21 X 31/2 in.

CM46011/16 X 311/16 in.

Also Available:CFC 315, 3/4 X 31/2 in. CFC 425, 3/4 X 41/4 in.

CFC 214, 3/4 X 21/4 in.

24112 PCA3/4 X 31/2 in.

281411/4 X 45/8 in.

RIDOUT 3761in. X 3 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CM445A11/16 X 31/2 in.

SM1215/16 X 41/2 in.

CASINGSCASINGS


(RB371)



SM711/16 X 41/2 in.

CM32711/16 X 21/4 in.

CKR3503/4 X 31/2 in.

PM71911/16 X 31/2 in.

CBG2753/4 X 23/4 in.

CAS5013/4 X 21/2 in.

CKN4253/4 X 41/4 in.

WM35111/16 X 21/2 in.

NH2347/8 X 23/4 in.

CM37111/16 X 3in.

MD21 X 31/2 in.

CM46011/16 X 311/16 in.

Also Available:CFC 315, 3/4 X 31/2 in. CFC 425, 3/4 X 41/4 in.

CFC 214, 3/4 X 21/4 in.

24112 PCA3/4 X 31/2 in.

281411/4 X 45/8 in.

RIDOUT 3761in. X 3 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CM445A11/16 X 31/2 in.

SM1215/16 X 41/2 in.

CASINGSCASINGS


(WM327)

(CM351)



CGA4251 X 41/4 in.

COXCOMB11/16 X 31/2 in.

NH3587/8 X 35/8 in.

WM37111/16 X 21/2 in.

CKN3503/4 X 31/2 in.

CM36111/16 X 31/4 in.

SM833/4 X 41/8 in.

LSM206011/16 X 41/2 in.

BM11881 X 41/4 in.

CN4001 X 4 in.

CBG4003/4 X 41/4 in.

CRC3503/4 X 31/2 in.

CRC4253/4 X 41/2 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CASINGSCASINGS



CGA4251 X 41/4 in.

COXCOMB11/16 X 31/2 in.

NH3587/8 X 35/8 in.

WM37111/16 X 21/2 in.

CKN3503/4 X 31/2 in.

CM36111/16 X 31/4 in.

SM833/4 X 41/8 in.

LSM206011/16 X 41/2 in.

BM11881 X 41/4 in.

CN4001 X 4 in.

CBG4003/4 X 41/4 in.

CRC3503/4 X 31/2 in.

CRC4253/4 X 41/2 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CASINGSCASINGS


(EC361)



CM45211/16 X 21/2 in.

SM 570111/4 X 41/2 in.

CM4339/16 X 31/4 in.

CM4739/16 X 21/4 in.

CAS3013/4 X 2in.

SM205011/16 X 41/2 in.

BM99515/16 X 43/4 in.

CAG42511/16 X 41/4 in.

MISS JENNY11/16 X 47/8 in.

C4251 X 41/4 in.

LWM 973/4 X 31/2 in.

CJF4251 X 41/4 in.

SM803/4 X 5 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CASINGSCASINGS



CM45211/16 X 21/2 in.

SM 570111/4 X 41/2 in.

CM4339/16 X 31/4 in.

CM4739/16 X 21/4 in.

CAS3013/4 X 2in.

SM205011/16 X 41/2 in.

BM99515/16 X 43/4 in.

CAG42511/16 X 41/4 in.

MISS JENNY11/16 X 47/8 in.

C4251 X 41/4 in.

LWM 973/4 X 31/2 in.

CJF4251 X 41/4 in.

SM803/4 X 5 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CASINGSCASINGS


(WM473) (WM433)

(WM452)



CM68311/16 X 31/4 in.

CTE3503/4 X 31/2 in.

TM111/16 X 31/4 in.

MS1661 SPROT LONG11/8 X 33/8 in.

3993/4 X 3 in.

SM20511 X 4 in.

RBI20811/16 X 33/4 in.

CW117/16 X 55/8 in.

Also available: 17/16 X 4 in

CAM3503/4 X 31/2 in.

BM14557/8 X 43/32 in.

C3523/4 X 31/2 in.

RBI SPR311/16 X 41/4 in.

BM25513/16 X 315/16 in.

CAM4003/4 X 41/4 in.

SM8413/8 X 51/4 in.

1-800-861-0734 • FAX 1-800-861-0737

CARTER MILLWORK, INC.CARTER MILLWORK, INC.14 15

MADE TO MATCH


CASINGSCASINGS



CM68311/16 X 31/4 in.

CTE3503/4 X 31/2 in.

TM111/16 X 31/4 in.

MS1661 SPROT LONG11/8 X 33/8 in.

3993/4 X 3 in.

SM20511 X 4 in.

RBI20811/16 X 33/4 in.

CW117/16 X 55/8 in.

Also available: 17/16 X 4 in

CAM3503/4 X 31/2 in.

BM14557/8 X 43/32 in.

C3523/4 X 31/2 in.

RBI SPR311/16 X 41/4 in.

BM25513/16 X 315/16 in.

CAM4003/4 X 41/4 in.

SM8413/8 X 51/4 in.

1-800-861-0734 • FAX 1-800-861-0737

CARTER MILLWORK, INC.CARTER MILLWORK, INC.14 15

MADE TO MATCH


CASINGSCASINGS


(WM683)



WM44411/16 X 31/4 in.

C3513/4 X 31/2 in.

LDFCA41X 4 in.

EC49015/16 X 51/2 in.

CKN2343/4 X 23/4 in.

SM8211/16 X 23/4 in.

SM211/16 X 35/8 in.

SM4711/4 X 31/2 in

CBG3003/4 X 31/2 in.

PT3125/8 X 3 in.

PRESIDENTIAL11/16 X 43/4 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CM46611/16 X 45/8 in.

CASINGSCASINGS


LW444



WM44411/16 X 31/4 in.

C3513/4 X 31/2 in.

LDFCA41X 4 in.

EC49015/16 X 51/2 in.

CKN2343/4 X 23/4 in.

SM8211/16 X 23/4 in.

SM211/16 X 35/8 in.

SM4711/4 X 31/2 in

CBG3003/4 X 31/2 in.

PT3125/8 X 3 in.

PRESIDENTIAL11/16 X 43/4 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


CM46611/16 X 45/8 in.

CASINGSCASINGS


(EC466)



S

DELTA HOWE1X 37/16 in.

CKN5351 X 31/2 in.

CVA5251X 51/4 in.

MSI111/16 X 31/4 in.

TMMH (Mini Howe)11/16 X 23/4 in.

CM1011/16 X 23/8 in.

CVA3503/4 X 31/2 in.

P LARGE HOWE11/8 X 41/4 in.

4046USBB13/16 X 11/2 in.

97BB11/8 X 11/16 in.

SM6811/16 X 17/16 in.

4048US-BB11/4 X 11/2 in.

BR28511/8 X 11/2 in.

CM80913/8 X 15/8 in.

C28115/16 X 15/16 in.

3436BB11/16 X 11/8 in. SM2513

11/8 X 17/8 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


S

C28215/16 X 15/8 in.

BACK BANDSCASINGS


34136-CA



S

DELTA HOWE1X 37/16 in.

CKN5351 X 31/2 in.

CVA5251X 51/4 in.

MSI111/16 X 31/4 in.

TMMH (Mini Howe)11/16 X 23/4 in.

CM1011/16 X 23/8 in.

CVA3503/4 X 31/2 in.

P LARGE HOWE11/8 X 41/4 in.

4046USBB13/16 X 11/2 in.

97BB11/8 X 11/16 in.

SM6811/16 X 17/16 in.

4048US-BB11/4 X 11/2 in.

BR28511/8 X 11/2 in.

CM80913/8 X 15/8 in.

C28115/16 X 15/16 in.

3436BB11/16 X 11/8 in. SM2513

11/8 X 17/8 in.

1-800-861-0734 • FAX 1-800-861-0737



MADE TO MATCH


S

C28215/16 X 15/8 in.

BACK BANDSCASINGS



GP2811 X11/8 in.

SM29111/16 X 51/8 in.

SM6031 X 71/4 in.

SM277/8 X 41/8 in.

SM2511-2 13/16 X 2 in.

SM2501-219/16 X 21/8 in.

SM251113/16 X 13/4 in.

CM28111/16 X 11/8 in.

S

CM28911/16 X 19/16 in.

BM61 X 63/4 in.

SM4221/4 X 15/8 in.

SM250119/16 X 111/16 in.

BB20011/2 X 23/8 in.

CRC1501 X 15/8 in.Also Available: 5/8 Rabbett11/16 Rabbett

SM251011/16 X 11/2 in.

CM28011/16 X 11/16 in.

Many more profiles available, call...1-800-861-0734 • FAX 1-800-861-07371-800-861-0734 • FAX 1-800-861-0737

BACK BANDS



MADE TO MATCH

CROWN

S


(WM280)

(WM281)



GP2811 X11/8 in.

SM29111/16 X 51/8 in.

SM6031 X 71/4 in.

SM277/8 X 41/8 in.

SM2511-2 13/16 X 2 in.

SM2501-219/16 X 21/8 in.

SM251113/16 X 13/4 in.

CM28111/16 X 11/8 in.

S

CM28911/16 X 19/16 in.

BM61 X 63/4 in.

SM4221/4 X 15/8 in.

SM250119/16 X 111/16 in.

BB20011/2 X 23/8 in.

CRC1501 X 15/8 in.Also Available:5/8 Rabbett11/16 Rabbett

SM251011/16 X 11/2 in.

CM28011/16 X 11/16 in.


BACK BANDS



MADE TO MATCH

CROWN

S



RBCCM6251 X 61/4 in.

CM54111/16 X 51/4 in.

SM8111/16 X 45/8 in.Also Available:SM8611/2 X 6 in

TP41/TLC50011/8 X 61/4 in.

CM449C3/4 X 51/4 in.Also Available:CM6449C3/4 X 61/4 in.

CM489/16 X 41/4 in.

AH4011/16 X 41/4 in.

WM8011/16 X 41/4 in.

COLONIAL COVE3/4 X 51/4 in.



1-800-861-0734 • FAX 1-800-861-0737

CROWN


MADE TO MATCH

CROWN


(WM48)




CM54111/16 X 51/4 in.

SM8111/16 X 45/8 in.Also Available:SM8611/2 X 6 in

TP41/TLC50011/8 X 61/4 in.

CM449C3/4 X 51/4 in.Also Available:CM6449C3/4 X 61/4 in.

CM489/16 X 41/4 in.

AH4011/16 X 41/4 in.

WM8011/16 X 41/4 in.

COLONIAL COVE3/4 X 51/4 in.



1-800-861-0734 • FAX 1-800-861-0737

CROWN


MADE TO MATCH

CROWN



BBS72511/16 X 71/4 in.

BBS1113/4 X 51/4 in.

SM11363/4 X 47/8 in.

SM2111/16 X 31/2 in.

CM525L3/4 X 51/4 in.

EC3611/16 X 71/4 in.

CM725L3/4 X 71/4 in.

SM3813/8 X 8

CCM7253/4 X 71/4 in.

CCM5253/4 X 51/4 in.CCM4253/4 X 41/4 in.

Also Available




MADE TO MATCH

CROWN CROWN



BBS72511/16 X 71/4 in.

BBS1113/4 X 51/4 in.

SM11363/4 X 47/8 in.

SM2111/16 X 31/2 in.

CM525L3/4 X 51/4 in.

EC3611/16 X 71/4 in.

CM725L3/4 X 71/4 in.

SM3813/8 X 8

CCM7253/4 X 71/4 in.

CCM5253/4 X 51/4 in.CCM4253/4 X 41/4 in.

Also Available




MADE TO MATCH

CROWN CROWN



RB711/16 X 51/4 in.

BM5124515/16 X 51/2 in.

CM375L3/4 X 31/4 in.

AH611 X 6 in.

CRN391 X 51/4 in.

CM70(COX)3/4 X 71/4 in.

CM539/16 X 25/8 in.

SM323/4 X 51/4 in.

RB45/8 X 31/2 in.


CROWN CROWN



MADE TO MATCH



RB711/16 X 51/4 in.

BM5124515/16 X 51/2 in.

CM375L3/4 X 31/4 in.

AH611 X 6 in.

CRN391 X 51/4 in.

CM70(COX)3/4 X 71/4 in.

CM539/16 X 25/8 in.

SM323/4 X 51/4 in.

RB45/8 X 31/2 in.


CROWN CROWN



MADE TO MATCH


(WM53)



24168-US-CR3/4 X 51/4 in.

9 DENTIL11/16 X 41/4 in.

COVE9/16 X 51/4 in.MTV629

1 X 53/4 in.

TLC50015/16 X 71/4 in.


CBM155411/4 X 61/2 in.

SM7127/8 X 41/2 in.


CROWNCROWN



MADE TO MATCH


MM2153

TLC505



24168-US-CR3/4 X 51/4 in.

9 DENTIL11/16 X 41/4 in.

COVE9/16 X 51/4 in.MTV629

1 X 53/4 in.

TLC50015/16 X 71/4 in.


CBM155411/4 X 61/2 in.

SM7127/8 X 41/2 in.


CROWNCROWN



MADE TO MATCH


EC9



CM529/16 X 23/4 in.

CM5493/4 X 51/4 in.

SM11573/4 X 53/8 in.

CM499/16 X 35/8 in.

CM479/16 X 45/8 in.

CM45 (1–1/8”Cove) 11/16 X 51/4 in.

S

SM116013/4 X 61/4 in.

SMITH DENTIL CRN13/16 X 55/16 in.

CM37CURTIS CROWN11/16 X 51/16 in.

S

S

S


CROWN


CROWN


MADE TO MATCH



CM529/16 X 23/4 in.

CM5493/4 X 51/4 in.

SM11573/4 X 53/8 in.

CM499/16 X 35/8 in.

CM479/16 X 45/8 in.

CM45 (1–1/8”Cove) 11/16 X 51/4 in.

S

SM116013/4 X 61/4 in.



S

S

S


CROWN


CROWN


MADE TO MATCH



CM529/16 X 23/4 in.

CM5493/4 X 51/4 in.

SM11573/4 X 53/8 in.

CM499/16 X 35/8 in.

CM479/16 X 45/8 in.

CM45 (1–1/8”Cove)11/16 X 51/4 in.

S

SM116013/4 X 61/4 in.



S

S

S


CROWN


CROWN


MADE TO MATCH



CM529/16 X 23/4 in.

CM5493/4 X 51/4 in.

SM11573/4 X 53/8 in.

CM499/16 X 35/8 in.

CM479/16 X 45/8 in.

CM45 (1–1/8”Cove)11/16 X 51/4 in.

S

SM116013/4 X 61/4 in.



S

S

S


CROWN


CROWN


MADE TO MATCH


(EC045)

(WM052)

(WM047)

(WM049)



71/4 MDF9/16 X 71/4 in.

USL 421 X 71/4 in.

COX483/4 X 41/4 in.

CM709/16 X 23/4 in.

CM749/16 X 13/4 in.

CM49L3/4 X 51/4 in.

AH417/8 X 7in.

MCM 20-53/4 X 51/2 in.

CM1711/16 X 55/8 in.

CM759/16 X 15/8 in.

S


CROWN


CROWN


MADE TO MATCH


HW208

(WM070)



71/4 MDF9/16 X 71/4 in.

USL 421 X 71/4 in.

COX483/4 X 41/4 in.

CM709/16 X 23/4 in.

CM749/16 X 13/4 in.

CM49L3/4 X 51/4 in.

AH417/8 X 7in.

MCM 20-5 3/4 X 51/2 in.

CM1711/16 X 55/8 in.

CM759/16 X 15/8 in.

S


CROWN


CROWN


MADE TO MATCH


(WM074)

(WM075)



SM40083/4 X 41/4 in.

CRB2505/8 X 21/2 in.

AH195/8 X 415/16 in.

WINDSOR 5/8 X 31/4 in.

17015/8 X 45/16 in.

BR CROWN ENHANCER5/8 X 41/2 in.

CM8105/8 X 71/4 in.

CM6189/16 X 51/4 in.

CM7109/16 X 41/4 in.

MS51809/16 X 51/4 in.

BCB5005/8 X 5 1/4 in.Also Available: BCB3005/8 X 3 1/4 in.BCB4005/8 X 4 1/4 in.BCB7005/8 X 7 1/4 in.BCB9253/4 X 9 1/4 in.

CM6639/16 X 31/4 in.

CM211/16 X 21/2 in.

S

S

S

S


CROWN BACKER BASES



MADE TO MATCH



SM40083/4 X 41/4 in.

CRB2505/8 X 21/2 in.

AH195/8 X 415/16 in.


17015/8 X 45/16 in.


CM8105/8 X 71/4 in.

CM6189/16 X 51/4 in.

CM7109/16 X 41/4 in.

MS51809/16 X 51/4 in.

BCB5005/8 X 5 1/4 in.Also Available:BCB3005/8 X 3 1/4 in.BCB4005/8 X 4 1/4 in.BCB7005/8 X 7 1/4 in.BCB9253/4 X 9 1/4 in.

CM6639/16 X 31/4 in.

CM211/16 X 21/2 in.

S

S

S

S


CROWN BACKER BASES



MADE TO MATCH


TLC599



SM40083/4 X 41/4 in.

CRB2505/8 X 21/2 in.

AH195/8 X 415/16 in.


17015/8 X 45/16 in.


CM8105/8 X 71/4 in.

CM6189/16 X 51/4 in.

CM7109/16 X 41/4 in.

MS51809/16 X 51/4 in.


CM6639/16 X 31/4 in.

CM211/16 X 21/2 in.

S

S

S

S


CROWN BACKER BASES



MADE TO MATCH



SM40083/4 X 41/4 in.

CRB2505/8 X 21/2 in.

AH195/8 X 415/16 in.


17015/8 X 45/16 in.


CM8105/8 X 71/4 in.

CM6189/16 X 51/4 in.

CM7109/16 X 41/4 in.

MS51809/16 X 51/4 in.


CM6639/16 X 31/4 in.

CM211/16 X 21/2 in.

S

S

S

S


CROWN BACKER BASES



MADE TO MATCH


(WM710)

AH810

(WM618)

(WM663)



CM2189/16 X 51/4 in.

MDF7145/8 X 71/4 in.

BBJ7253/4 X 71/4 in.

BBJ5253/4 X 51/4 in.Also Available:BBJ3253/4 X 31/4 in.BBJ4253/4 X 41/4 in.

SM973/4 X 51/2in.

6129/16 X 6 9/16 in.

CM6239/16 X 31/4 in.

CM61611/16 X 61/8 in.

CM7539/16 X 31/4 in.Also Available:CM7509/16 X 41/4 in.CM750W9/16 X 51/4 in.

TWPB11/16 X 51/4 in.

S

S


BASES BASES



MADE TO MATCH

CM6109/16 X 5 1/4 in.

S


(WM623)



CM2189/16 X 51/4 in.

MDF7145/8 X 71/4 in.

BBJ7253/4 X 71/4 in.

BBJ5253/4 X 51/4 in.Also Available:BBJ3253/4 X 31/4 in.BBJ4253/4 X 41/4 in.

SM973/4 X 51/2in.

6129/16 X 6 9/16 in.

CM6239/16 X 31/4 in.

CM61611/16 X 61/8 in.

CM7539/16 X 31/4 in.Also Available:CM7509/16 X 41/4 in.CM750W9/16 X 51/4 in.

TWPB11/16 X 51/4 in.

S

S


BASES BASES



MADE TO MATCH

CM6109/16 X 5 1/4 in.

S


(EC616)



AH61711/8 X 7 in.

LDFBA7185/8 X 71/8 in.

MBC38-53/4 X 51/4 in.

VICTORIAN BASE9/16 X 51/4in.

LWP 11411/16 X 7/8 in.

SM6411/4 X 2 in.

W3911/8 X 11/2 in.

CM16611/16 X 11/4 in.

CM16411/16 X 11/8 in.

CM16311/16 X 13/8in.

CM16711/16 X 11/8 in.

120111/16 X 11/4in.

SM303/4 X 13/8 in.

MS28717/8 X 21/16 in.

SM407/8 X 17/8 in.

BCB 15011/16 X 11/2 in.

SM545/8 X 13/8 in.

SM4311/4 X 21/2 in.

BLB5255/8 X 51/4 in.Also Available:BLB4255/8 X 41/4 in.BLB7255/8 X 71/4 in.

SS


BASES BASE CAPS


MADE TO MATCH




AH61711/8 X 7 in.

LDFBA7185/8 X 71/8 in.

MBC38-53/4 X 51/4 in.


LWP 11411/16 X 7/8 in.

SM6411/4 X 2 in.

W3911/8 X 11/2 in.

CM16611/16 X 11/4 in.

CM16411/16 X 11/8 in.

CM16311/16 X 13/8in.

CM16711/16 X 11/8 in.

120111/16 X 11/4in.

SM303/4 X 13/8 in.

MS28717/8 X 21/16 in.

SM407/8 X 17/8 in.

BCB 15011/16 X 11/2 in.

SM545/8 X 13/8 in.

SM4311/4 X 21/2 in.


SS


BASES BASE CAPS


MADE TO MATCH




AH61711/8 X 7 in.

LDFBA7185/8 X 71/8 in.

MBC38-53/4 X 51/4 in.


LWP 11411/16 X 7/8 in.

SM6411/4 X 2 in.

W3911/8 X 11/2 in.

CM16611/16 X 11/4 in.

CM16411/16 X 11/8 in.

CM16311/16 X 13/8in.

CM16711/16 X 11/8 in.

120111/16 X 11/4in.

SM303/4 X 13/8 in.

MS28717/8 X 21/16 in.

SM407/8 X 17/8 in.

BCB 15011/16 X 11/2 in.

SM545/8 X 13/8 in.

SM4311/4 X 21/2 in.


SS


BASES BASE CAPS


MADE TO MATCH



(WM166) (WM164) (WM163) (WM167)



GP2001X 31/4 in.

CM3971 X 31/2 in.

CM29711/16 X 3 in.

CM30011/16 X 3 in.

SM22513/8 X 35/8 in.

MD411/16 X 31/4 in.

CRA3503/4 X 31/2 in.

CR2903/4X 31/2 in.

415/16 X 25/8 in.

HH1333/4 X 2 in.

CR560 1X 5in.

CRAL3331X 3 in.

C13611/16 X 21/4 in.

CM30211/16 X 2 3/4 in.

CM39011/16 X 25/8 in.

S


CHAIR RAIL CHAIR RAIL



MADE TO MATCH


(WM390)



GP2001X 31/4 in.

CM3971 X 31/2 in.

CM29711/16 X 3 in.

CM30011/16 X 3 in.

SM22513/8 X 35/8 in.

MD411/16 X 31/4 in.

CRA3503/4 X 31/2 in.

CR2903/4X 31/2 in.

415/16 X 25/8 in.

HH1333/4 X 2 in.

CR560 1X 5in.

CRAL3331X 3 in.

C13611/16 X 21/4 in.

CM30211/16 X 2 3/4 in.

CM39011/16 X 25/8 in.

S


CHAIR RAIL CHAIR RAIL



MADE TO MATCH


(WM300)



SM6411/4 X 2 in.

CM67/16 X 41/2 in.

PM1183/4 X 1in.

PM51277/8 X 31/16 in.

PM512611/16 X 41/16 in.

PM4315/16 X 21/8 in.

MPM203/4 X 11/2 in.

SM351415/16 X 23/8 in.

A99/16 X 11/4 in.

SC4211/16 X 15/8in.RABBETED Also Available: C42R 1/2C42R 3/4

CM9571/2 X 41/4 in.

CM9567/16 X 41/4 in.

CM3981/2 X 51/4 in.

CRB4253/4 X 41/4 in.

CRB5253/4 X 51/2 in.

4265/8 X 6 in.

CM425 (C135)1/2 X 41/2 in.

PM2503/4 X 2 in.RABBETED Also Available: PM250R41/2 in.RABPM250R53/4 in.RAB

CM1841/2 X 11/2 in.

CM1839/16 X 11/8 in.

5711/16 X 21/4 in.

703/8 X 1/2 in.

S


CHAIR RAIL BACKER PANEL MOULDING



MADE TO MATCH



SM6411/4 X 2 in.

CM67/16 X 41/2 in.

PM1183/4 X 1in.

PM51277/8 X 31/16 in.

PM512611/16 X 41/16 in.

PM4315/16 X 21/8 in.

MPM203/4 X 11/2 in.

SM351415/16 X 23/8 in.

A99/16 X 11/4 in.


CM9571/2 X 41/4 in.

CM9567/16 X 41/4 in.

CM3981/2 X 51/4 in.

CRB4253/4 X 41/4 in.

CRB5253/4 X 51/2 in.

4265/8 X 6 in.

CM425 (C135)1/2 X 41/2 in.

PM2503/4 X 2 in.RABBETEDAlso Available:PM250R41/2 in.RABPM250R53/4 in.RAB

CM1841/2 X 11/2 in.

CM1839/16 X 11/8 in.

5711/16 X 21/4 in.

703/8 X 1/2 in.

S





MADE TO MATCH



SM6411/4 X 2 in.

CM67/16 X 41/2 in.

PM1183/4 X 1in.

PM51277/8 X 31/16 in.

PM512611/16 X 41/16 in.

PM4315/16 X 21/8 in.

MPM203/4 X 11/2 in.

SM351415/16 X 23/8 in.

A99/16 X 11/4 in.


CM9571/2 X 41/4 in.

CM9567/16 X 41/4 in.

CM3981/2 X 51/4 in.

CRB4253/4 X 41/4 in.

CRB5253/4 X 51/2 in.

4265/8 X 6 in.

CM425 (C135)1/2 X 41/2 in.


CM1841/2 X 11/2 in.

CM1839/16 X 11/8 in.

5711/16 X 21/4 in.

703/8 X 1/2 in.

S





MADE TO MATCH


(WM957)

(WM956)



SM6411/4 X 2 in.

CM67/16 X 41/2 in.

PM1183/4 X 1in.

PM51277/8 X 31/16 in.

PM512611/16 X 41/16 in.

PM4315/16 X 21/8 in.

MPM203/4 X 11/2 in.

SM351415/16 X 23/8 in.

A99/16 X 11/4 in.


CM9571/2 X 41/4 in.

CM9567/16 X 41/4 in.

CM3981/2 X 51/4 in.

CRB4253/4 X 41/4 in.

CRB5253/4 X 51/2 in.

4265/8 X 6 in.

CM425 (C135)1/2 X 41/2 in.


CM1841/2 X 11/2 in.

CM1839/16 X 11/8 in.

5711/16 X 21/4 in.

703/8 X 1/2 in.

S





MADE TO MATCH



SM6411/4 X 2 in.

CM67/16 X 41/2 in.

PM1183/4 X 1in.

PM51277/8 X 31/16 in.

PM512611/16 X 41/16 in.

PM4315/16 X 21/8 in.

MPM203/4 X 11/2 in.

SM351415/16 X 23/8 in.

A99/16 X 11/4 in.


CM9571/2 X 41/4 in.

CM9567/16 X 41/4 in.

CM3981/2 X 51/4 in.

CRB4253/4 X 41/4 in.

CRB5253/4 X 51/2 in.

4265/8 X 6 in.

CM425 (C135)1/2 X 41/2 in.


CM1841/2 X 11/2 in.

CM1839/16 X 11/8 in.

5711/16 X 21/4 in.

703/8 X 1/2 in.

S





MADE TO MATCH


WM133 (WM183)

(WM184)



LWP28611/16 X 2 in.

CM2911/2 X 31/2 in.

CM20711/16 X 21/2 in.

CM2105/8 X 15/8 in.

CM20911/16 X 2in.

EC18111/4 X 31/4 in.

CM18011/4 X 2 in.

CM283/4 X 3in.CM1206

1 X 31/16in.

CM28711/16 X 2in.

CM2125/8 X 21/2in.

SM41(WM286)11/16 X 2 in.

WP20711/8 X 31/4 in.

CONGRESSIONAL BMC (EC185)11/4 X 4 in.

WM17911/4 X 31/4 in.

CM17511/16 X 2 in.

S

S

S


MADE TO MATCH

1-800-861-0734 • FAX 1-800-861-0737

BRICK MOULDING


RAKES



(WM180)

(WM175)



LWP28611/16 X 2 in.

CM2911/2 X 31/2 in.

CM20711/16 X 21/2 in.

CM2105/8 X 15/8 in.

CM20911/16 X 2in.

EC18111/4 X 31/4 in.

CM18011/4 X 2 in.

CM283/4 X 3in.CM1206

1 X 31/16in.

CM28711/16 X 2in.

CM2125/8 X 21/2in.

SM41(WM286)11/16 X 2 in.

WP20711/8 X 31/4 in.


WM17911/4 X 31/4 in.

CM17511/16 X 2 in.

S

S

S


MADE TO MATCH

1-800-861-0734 • FAX 1-800-861-0737

BRICK MOULDING


RAKES




LWP28611/16 X 2 in.

CM2911/2 X 31/2 in.

CM20711/16 X 21/2 in.

CM2105/8 X 15/8 in.

CM20911/16 X 2in.

EC18111/4 X 31/4 in.

CM18011/4 X 2 in.

CM283/4 X 3in.CM1206

1 X 31/16in.

CM28711/16 X 2in.

CM2125/8 X 21/2in.

SM41(WM286)11/16 X 2 in.

WP20711/8 X 31/4 in.


WM17911/4 X 31/4 in.

CM17511/16 X 2 in.

S

S

S


MADE TO MATCH

1-800-861-0734 • FAX 1-800-861-0737

BRICK MOULDING


RAKES




LWP28611/16 X 2 in.

CM2911/2 X 31/2 in.

CM20711/16 X 21/2 in.

CM2105/8 X 15/8 in.

CM20911/16 X 2in.

EC18111/4 X 31/4 in.

CM18011/4 X 2 in.

CM283/4 X 3in.CM1206

1 X 31/16in.

CM28711/16 X 2in.

CM2125/8 X 21/2in.

SM41(WM286)11/16 X 2 in.

WP20711/8 X 31/4 in.


WM17911/4 X 31/4 in.

CM17511/16 X 2 in.

S

S

S


MADE TO MATCH

1-800-861-0734 • FAX 1-800-861-0737

BRICK MOULDING


RAKES



(WM287) (WM212) (WM207)

(WM209) (WM210)



FLEX JAMB496 3/4 X 49/16 in.

696 3/4 X 69/16 in.EASED EDGE

1 X 2 3/4 X 11/2 in.

1 X 2 NET 3/4 X 2 in.

CMXJ 3/4 X 31/16 in.

1 x 4 3/4 X 31/2 in.

1 x 6 3/4 X 51/2 in.

1 x 8 3/4 X 71/2 in.

1 x 10 3/4 X 91/4 in.

1 x 12 3/4 X 111/4 in.5/4 x 4 1 X 31/2 in.5/4 x 6 1 X 51/2 in.5/4 x 8 1 X 71/2 in.5/4 x 10 1 X 91/4 in.5/4 x 12 1 X 111/4 in.

S 4 SCM19711/16 X 15/8 in.

CM27311/16 X 13/4 in.

CM9407/16 X 7/8 in.Also Available:CM941A7/16 X 5/8 in.CM9417/16 X 3/4 in.

CM9883/8 X 11/2 in.Also Available:CM9873/8 X 2 in.

CM933/4 X 3/4 in.

CM1011/2 X1/2 in.

SCOTIA WM10751/2 X 3/4 in.

CM20415/16 X 15/16 in.

CM2063/4 X 3/4 in.

CM10011/16 X11/16 in.

CM20511/16 X 11/16 in.

CM1379/16 X 11/4 in.

HR15011/2 X 3/4 in.

HR1001 X 1/2 in.

CM131 (Ogee Shoe)7/16 X 3/4 in.

PENCIL MOULD5/8 X 5/8 in.

1in. QR. 1in. X 1in.

CM1053/4 X 3/4 in.

CM9363/8 X 13/8 in.Also Available:CM9373/8 X 11/4 in.

CM1277/16 X 11/16 in.

CM10611/16 X 11/16 in.

S S

S S

S

S

S

S

S

S S

S S

CM1261/2 X 3/4 in.


MADE TO MATCH

1-800-861-0734 • FAX 1-800-861-0737

VARIATIONS


VARIATIONS



(WM273)

(WM105) (WM106)

(WM126)



FLEX JAMB496 3/4 X 49/16 in.

696 3/4 X 69/16 in.EASED EDGE

1 X 2 3/4 X 11/2 in.

1 X 2 NET 3/4 X 2 in.

CMXJ 3/4 X 31/16 in.

1 x 4 3/4 X 31/2 in.

1 x 6 3/4 X 51/2 in.

1 x 8 3/4 X 71/2 in.

1 x 10 3/4 X 91/4 in.

1 x 12 3/4 X 111/4 in.5/4 x 4 1 X 31/2 in.5/4 x 6 1 X 51/2 in.5/4 x 8 1 X 71/2 in.5/4 x 10 1 X 91/4 in.5/4 x 12 1 X 111/4 in.

S 4 SCM19711/16 X 15/8 in.

CM27311/16 X 13/4 in.

CM9407/16 X 7/8 in.Also Available:CM941A7/16 X 5/8 in.CM9417/16 X 3/4 in.

CM9883/8 X 11/2 in.Also Available:CM9873/8 X 2 in.

CM933/4 X 3/4 in.

CM1011/2 X1/2 in.

SCOTIA WM10751/2 X 3/4 in.

CM20415/16 X 15/16 in.

CM2063/4 X 3/4 in.

CM10011/16 X11/16 in.

CM20511/16 X 11/16 in.

CM1379/16 X 11/4 in.

HR15011/2 X 3/4 in.

HR1001 X 1/2 in.

CM131 (Ogee Shoe)7/16 X 3/4 in.

PENCIL MOULD5/8 X 5/8 in.

1in. QR. 1in. X 1in.

CM1053/4 X 3/4 in.

CM9363/8 X 13/8 in.Also Available:CM9373/8 X 11/4 in.

CM1277/16 X 11/16 in.

CM10611/16 X 11/16 in.

S S

S S

S

S

S

S

S

S S

S S

CM1261/2 X 3/4 in.


MADE TO MATCH

1-800-861-0734 • FAX 1-800-861-0737

VARIATIONS


VARIATIONS



(WM204)



49

PAGE 10LSM2060 BM1188 CN400CBG400 CRC350 CRC425PAGE 11CGA425 COXCOMB NH358 WM371 CKN350 CM361 SM83PAGE 12SM80 CJF425 LWM 97 C425MISS JENNY CAG425PAGE 13CM433 CM473 CAS30 CM452SM2050 BM995SM 5701 PAGE 14 CAM350BM1455 C352RBI SPR3 BM255 CAM400 SM84PAGE 15RBI208 CTE350 CM683 TM1 399MS1661 SM2051 CW1PAGE 16C351 WM444LDFCA4 CKM234 SM82EC490

PAGE 24SM1136 BBS725CCM725CCM525 (NS) CCM425 (NS) BBS111PAGE 25SM 21 EC36 SM38CM725L CM525LPAGE 26SM32 CM375L RB4 BM51245 RB7PAGE 27AH61 CRN39 CM70(COX) CM53PAGE 28MTV629 COVE TLC500 RBCCM525PAGE 29CBM1554 24168-US-CR 9 DENTIL SM712PAGE 30CM549 CM37SMITH DENTIL CRN SM1157PAGE 31CM45 (1-1/8”Cove)CM52 CM47SM1160 CM49PAGE 32AH41 MS43 USL42 CM70PAGE 33MCM 20-5 COX48CM17 CM74 CM75CM49L

PAGE 34-CROWN BACKERSSM4008 CRB250 AH19CM2 WINDSOR 1701BR CROWN ENHANCERPAGE 35-BASESCM810 CM618 CM710BCB500BCB300 (NS) BCB400 (NS) BCB700 (NS) BCB925 (NS) MS5180CM663PAGE 36612 SM97CM610 CM623 CM218 CM753CM750 (NS) CM750W (NS)PAGE 37CM616 TWPB MDF714BBJ725 BBJ525BBJ325 (NS) BBJ425 (NS) PAGE 38BLB525BLB425 (NS) BLB725 (NS)VICTORIAN BASE MBC38-5 LDFBA718AH617PAGE 39 BASE CAPSCM166 CM164 CM163 CM167 1201SM30 W39 SM64 MS287SM54 SM43LWP 114 BCB 150 SM40

PAGE 40 CHAIR RAILC136 CM390 4 CR560 CM302 CR290CRAL333 HH133PAGE 41SM225 MD4 CM300 GP200 CM297 CRA350 CM397PAGE 42 CHAIR RAIL BACKERCM957 CRB425 CM956 CM6CM425 (C135) CM398 CRB525426PAGE 43 PANEL MOULDINGMPM20PM118 CM183 A9SM64 PM43CM184 57,70SM3514 PM5127 PM5126 C42C42R 1/2(NS)C42R 3/4 (NS)PM250PM250R4(NS) PM250R5(NS)PAGE 44 BRICK MOULDINGAH181 CM175 WM179CONGRESSIONAL BMC CM180PAGE 45 RAKESCM287 CM1206 CM212 CM28 CM207 CM29CM209 CM210

PAGE 45 CONTINUEDSM41(WM286) LWP286 WP207PAGE 46 VARIATIONSCM273 CM197 CM137 CM988CM987 (NS)HR150 HR100CM131PENCIL MOULD 1IN. QR.CM105 CM106 CM936CM937 (NS) CM940 CM941A (NS) CM941 (NS)CM127 CM126PAGE 47CM93 CM100 WM1075CM101 CM204 CM205 CM206S4S- 13 SizesFLEX JAM 496 &696

PAGE 17CBG300 SM47 PT312 SM2 CM466PRESIDENTIALPAGE 18P LARGE HOWE TMMHDELTA HOWE CKN535 CM10CVA350 CVA525 MSI1PAGE 19-BACK BANDSC282 CM809 4048USBB 97BB SM68 CM142 4048C281 3436BB SM2513PAGE 20SM2501-2 SM2501 CM280 BB200 SM2510 SM2511-2 SM2511 CM289 CRC150 GP281 CM281PAGE 21- CROWNSM27 SM603 BM6SM29 SM42PAGE 22AH40 CM48 WM80 CM541COLONIAL COVEPAGE 23SM81 SM86 (NS) RBCCM625 TP41 CM449CCM6449C (NS) MADE TO MATCH MADE TO MATCH

4264 Old Linwood RoadLinwood, NC 27299

1-800-861-0734FAX 1-800-861-0737

PAGE 5- CASINGSCM356 CM366 CM445 CM444 CM376CM444ACM470 CM442 CM1CM97PAGE 6CCC525 C606RSM75 SM85C606F SM5806PAGE 7C600R CM14R CM14F PT338F PT338R 1002 1002M CNF312 CCC350 SM8PAGE 8SM12 CM445A CFC 214CFC 315 (NS) CFC 425 (NS) 24112 PCA 2814CM460 CM371 MD2NH234PAGE 9SM7 CM327 CRK350 PM719 WM351 CBG275RIDOUT 376 CAS50 CKN425

We have many more profilesavailable that may suit your

specific designrequirements. We are always

available to recreate yourcustom patterns at...

1-800-861-0734

US MAIL AT:

PO BOX 189Linwood, NC 27299

(NS)=Not shown but available

CODE CC/ASB-10/2006


48

INDEX INDEX



49

PAGE 10LSM2060 BM1188 CN400CBG400 CRC350 CRC425PAGE 11CGA425 COXCOMB NH358 WM371 CKN350 CM361 SM83PAGE 12SM80 CJF425 LWM 97 C425MISS JENNY CAG425PAGE 13CM433 CM473 CAS30 CM452SM2050 BM995SM 5701 PAGE 14 CAM350BM1455 C352RBI SPR3 BM255 CAM400 SM84PAGE 15RBI208 CTE350 CM683 TM1 399MS1661 SM2051 CW1PAGE 16C351 WM444LDFCA4 CKM234 SM82EC490

PAGE 24SM1136 BBS725CCM725CCM525 (NS) CCM425 (NS) BBS111PAGE 25SM 21 EC36 SM38CM725L CM525LPAGE 26SM32 CM375L RB4 BM51245 RB7PAGE 27AH61 CRN39 CM70(COX) CM53PAGE 28MTV629 COVE TLC500 RBCCM525PAGE 29CBM1554 24168-US-CR 9 DENTIL SM712PAGE 30CM549 CM37SMITH DENTIL CRN SM1157PAGE 31CM45 (1-1/8”Cove)CM52 CM47SM1160 CM49PAGE 32AH41 MS43 USL42 CM70PAGE 33MCM 20-5 COX48CM17 CM74 CM75CM49L

PAGE 34-CROWN BACKERSSM4008 CRB250 AH19CM2 WINDSOR 1701BR CROWN ENHANCERPAGE 35-BASESCM810 CM618 CM710BCB500BCB300 (NS) BCB400 (NS) BCB700 (NS) BCB925 (NS) MS5180CM663PAGE 36612 SM97CM610 CM623 CM218 CM753CM750 (NS) CM750W (NS)PAGE 37CM616 TWPB MDF714BBJ725 BBJ525BBJ325 (NS) BBJ425 (NS) PAGE 38BLB525BLB425 (NS) BLB725 (NS)VICTORIAN BASE MBC38-5 LDFBA718AH617PAGE 39 BASE CAPSCM166 CM164 CM163 CM167 1201SM30 W39 SM64 MS287SM54 SM43LWP 114 BCB 150 SM40

PAGE 40 CHAIR RAILC136 CM390 4 CR560 CM302 CR290CRAL333 HH133PAGE 41SM225 MD4 CM300 GP200 CM297 CRA350 CM397PAGE 42 CHAIR RAIL BACKERCM957 CRB425 CM956 CM6CM425 (C135) CM398 CRB525426PAGE 43 PANEL MOULDINGMPM20PM118 CM183 A9SM64 PM43CM184 57,70SM3514 PM5127 PM5126 C42C42R 1/2(NS)C42R 3/4 (NS)PM250PM250R4(NS) PM250R5(NS)PAGE 44 BRICK MOULDINGAH181 CM175 WM179CONGRESSIONAL BMC CM180PAGE 45 RAKESCM287 CM1206 CM212 CM28 CM207 CM29CM209 CM210

PAGE 45 CONTINUEDSM41(WM286) LWP286 WP207PAGE 46 VARIATIONSCM273 CM197 CM137 CM988CM987 (NS)HR150 HR100CM131PENCIL MOULD 1IN. QR.CM105 CM106 CM936CM937 (NS) CM940 CM941A (NS) CM941 (NS)CM127 CM126PAGE 47CM93 CM100 WM1075CM101 CM204 CM205 CM206S4S- 13 SizesFLEX JAM 496 &696

PAGE 17CBG300SM47PT312SM2CM466PRESIDENTIALPAGE 18P LARGE HOWETMMHDELTA HOWECKN535CM10CVA350CVA525MSI1PAGE 19-BACKBANDSC282CM8094048USBB97BBSM68CM1424048C2813436BBSM2513PAGE 20SM2501-2SM2501CM280BB200SM2510SM2511-2SM2511CM289CRC150GP281CM281PAGE 21- CROWNSM27SM603BM6SM29SM42PAGE 22AH40CM48WM80CM541COLONIAL COVEPAGE 23SM81SM86 (NS)RBCCM625TP41CM449CCM6449C (NS) MADE TO MATCH MADE TO MATCH

4264 Old Linwood Road Linwood, NC 27299

1-800-861-0734 FAX 1-800-861-0737

PAGE 5- CASINGSCM356CM366CM445CM444CM376CM444ACM470CM442CM1CM97PAGE 6CCC525C606RSM75SM85C606FSM5806PAGE 7C600RCM14RCM14FPT338FPT338R10021002MCNF312CCC350SM8PAGE 8SM12CM445ACFC 214CFC 315 (NS)CFC 425 (NS)24112 PCA2814CM460CM371MD2NH234PAGE 9SM7CM327CRK350PM719WM351CBG275RIDOUT 376CAS50CKN425

We have many more profiles available that may suit your

specific design requirements. We are always

available to recreate your custom patterns at...

1-800-861-0734

US MAIL AT:

PO BOX 189 Linwood, NC 27299

(NS)=Not shown but available

CODE CC/ASB-10/2006


48

INDEX INDEX


CODE CC/ASB-04/2012



51

Many more profiles available, call...1-800-861-0734 • FAX 1-800-861-0737 Many more profiles available, call...1-800-861-0734 • FAX 1-800-861-0737

50

NOTESNOTES



51

Many more profiles available, call...1-800-861-0734 • FAX 1-800-861-0737 Many more profiles available, call...1-800-861-0734 • FAX 1-800-861-0737

50

NOTESNOTES



4 2 6 4 O l d L i n w o o d R o a d L i n w o o d , N C 2 7 2 9 9

S E L E C T I O N G U I D E

4 2 6 4 O l d L i n w o o d R o a d L i n w o o d , N C 2 7 2 9 91 - 8 0 0 - 8 6 1 - 0 7 3 4FA X 1 - 8 0 0 - 8 6 1 - 0 7 3 7 w w w. c a r t e r f l e x . c o m


www.flextrim.com


Documents

SEL ECTION G U I D E - Flexible Moulding and · PDF fileSEL ECTION G U I D E CovcxSS 1CMW_Singles.indd 1 9/18/08 9:30:51 AM3/19/12 10:38 AM 4264 Old Linwood Road Lin wo od, NC 27299