Seite1010 1013 HB30englisch Accessories Cable Attachment Earthing

8/22/2019 Seite1010 1013 HB30englisch Accessories Cable Attachment Earthing

1/4

1010

Rittal Catalogue 30/System accessories

C ABL E AT T AC HM E NT

Cable tie fastenerFor all commercially available cable ties upto a tie width of 4.8 mm. Simply insert intothe round system punchings and secureby hammering down the split rivet.

Material:Polyamide 6.6

Cable tiesfor fast assemblyThe super-fast solution for attaching cablesto the enclosure profile or mounting systemparts. Simply clip into the round system

punchings.

Note:Metal cable tie,see page 893.

Lengthmm

Packsof

Model No.SZ

150 100

2597.000

Packs of

Model No. CP

100

6059.000

Nylon loop fastener

With the nylon loop fastener, securedcables are easily released, allowingindividual cables to be added or removed.Ideal for sensitive data cables (fibre-optic/Cu), as it avoids indentations on the cable

sheathing.In addition, the nylon loop fastener may bescrew-fastened to the round systempunchings.

Colour:Black

Also required:

Screw SZ 2486.500 for screw-fastening tothe round system punchings,see page 981.

Widthmm

Lengthmm

Max.cable

diameter

Packsof

Model No.DK

16 130 30 mm 10 7072.220

16 200 50 mm 10 7072.230

16 300 90 mm 10 7072.240

Cable fastening

For professional, secure fastening of cablesand conduits.

For fastening:

Simply push into the PS mounting rail23 x 23 mmor

Screw-fasten onto the round punchingsof the enclosures, as well as allpunched rails and punched sections.

As the fastening attachments are bayable,several fastening attachments, even thoseof different sizes, can be assembled usingjust 2 screws.

Material:

Polyamide

Also required:

Posidrive raised countersunk screwM5 x 12 mm (SZ 2488.000) for screw-fastening in the round system punchings,see page 981.

For cable

diameterfrom to

Packsof

Model No.PS

6 to 9 mm 50

4319.090

9 to 12 mm 50

4319.120

12 to 16 mm 50

4319.160

16 to 20 mm 50

4319.200


2/4

1011


E A R T H I N G / P O T E N T I A L E Q U A L I S A T I O N

Cableattachment/

earthing

Contact paint

Contact paint prevents the corrosion ofconductive, unprotected contact points.

Contents:

12 ml

* Not necessary with TS8

Material:Plastic-bound abrasive

Model No. SM

For frame section

2414.000

For earthing bolt*

2414.500

Contact cutter

The contact cutter enables EMC-compatiblepreparation of the contact point e.g. forearthing straps.Plastic-bound abrasive with guide pin for

round system punchings.With location point for drill, grinder etc.

Packs of

Model No. SZ

1

2415.000

Earthing strap

Tin-plated copper, in various lengths andcross-sections with press-fitted contactrings. Earthing straps counteract thecurrent displacement effect at highfrequencies, whilst at the same time

offering highly flexible connectionopportunities.

Additional accessories:

Central earthing point,see page 1011.

ForCross-section

mm

2

Lengthmm

Packsof

Model No.SZ

M6 10 200 10 2412.210

M8 16 200 10 2412.216

M8 25 200 10 2412.225

M6 10 300 10 2412.310

M8 16 300 10 2412.316

M8 25 300 10 2412.325

Earth straps

Choose from 6 ready-to-use earth straps invarious lengths and cross-sections. Forscrews M6 and M8.

Cross-section

mm

2

Packsof

Model No. SZ

Length170 mm

Length300 mm

4 5 2564.000 2567.000

16 5 2565.000 2568.000

25 5 2566.000 2569.000

Contact washers

These toothed contact washers enablesecure PE conductor connection.Consequently, there is no need to manuallystrip paint in the connection area.

Size Packs of

Model No. SZ

M5 100 2343.000

M6 100 2334.000

M8 100 2335.000

Assembly materials

For the attachment of earth straps andearthing straps to:

Horizontal enclosure sections

PS rail systemsusing captive nuts,see below.

Size Packs of

Model No. SZ

M6 10 set

2570.000

M8 10 set

2559.000

Captive nuts

For rectangular system punchings(10.5 x 12.5 mm),see page 982.

Other EMC accessories,see page 308 311.


3/4

1012


Central earthing pointFor connecting Earth straps Earthing braidsto the vertical and horizontal enclosure

profile. The connection bracket isconnected to the enclosure frame with2 screws and is securely contacted. Earthconnection is carried out via the threadedbolt M8 x 20 mm.

Material:Sheet steel, zinc-plated, passivated.

Supply includes:1 connection bracket,

2 screws BZ 5.5 x 13 mm,2 serrated washers,1 nut M8,1 contact washer M8,1 washer.

Packs of Model No. DK

1 7829.200

Earth rails, vertical(potential equalisation rails)

For vertical installation in networkenclosures. Easily fitted to the 25 mm DINpitch pattern of distributors or to the482.6 mm (19

)

mounting angles. Thesupplied earth conductors facilitate starearthing of the cable clamp straps in thepatch panels. The earth terminals are fullyadjustable. Current carrying capacity of railapprox. 200 A.

Supply includes:Earth rail of E-Cu 57 to DIN 1759,DIN 40 500, 15 x 5 mm,16 conductor connection clamps

2.5 16 mm

2

,

15 earth cables 6 mm

2

, L = 500 mm,including assembly parts.

Forenclosuresheight mm

Lengthmm Packsof

Model No.DK

800 600 1 set

7541.000

1000 800 1 set

7542.000

1200 1000 1 set

7543.000

1400 1200 1 set

7544.000

1600 1400 1 set

7545.000

1800 1600 1 set

7546.000

2000 1800 1 set

7547.000

2200 2000 1 set

7548.000

Expansion kitfor earth cables

For system-compatible expansion of thestar earthing on the vertical potentialequalisation rail.

Supply includes:

6 mm

2

earth cables, pre-assembled withring terminals and wire end ferrules,L = 500 mm, with earth terminals2.5 16 mm

2

, including assembly parts.

Packs of

Model No. DK

10 7549.000

E A R T H I N G / P O T E NT I A L E Q U A L I S A T I O N

PE busbar

695 mm long PE busbar with pre-fittedscrews, including terminal clamps up to6 mm

2

(fine wire conductors), 10 mm

2

(single wire or multi-wire conductors) andmain terminal clamp up to 35 mm

2

.

Additional accessories:

Cable retainer, flatSZ 2365.000,see page 983.

Cable retainer, inclinedSZ 2366.000,see page 983.

Packs of

Model No. SZ

1 2364.000


4/4

1013


E A R T H I N G / P OT E N T I A L E Q U A L I S A T I O N

Earthing/potential

equalisation

Earthing set

For star earthing.With the pre-assembled earth conductors,star potential equalisation is easilyintegrated into network enclosures.

Supply includes:6 mm

2

earth cables,assembly material for earth cables;an earth rail is also supplied for theTC-Rack and flexRack.

For Packs of

Model No. DK

TC-Rack 1 set

7277.000

flexRack 1 set

7278.000

QuickRack 1 set

7526.980

Earthing set, pre-assembled

For star earthing. With the pre-assembledearth conductors on a potentialequalisation rail, star potential equalisationis easily integrated into network enclosures.

Supply includes:6 mm

2 earth cables on a potentialequalisation rail, 2 isolators,including assembly parts.

For TS enclosuresup to (W x H x D)

mm

Packsof

Model No.DK

800 x 2000 x 800 1 set

7829.100

800 x 2200 x 1000 1 set

7829.110

Earth rail, horizontal(potential equalisation rail)

With two isolators, 20 M5 earth connectionsand 2 earth connections for 25 mm

2

.Current carrying capacity approx. 200 A.

Supply includes:Earth rail of E-Cu 57 to DIN 1759,DIN 40500, 15 x 5 mm,20 connection points with M5 screws,2 earth connections 25 mm

2

,2 isolators, including assembly parts.

Length Packs of

Model No. DK

450 mm 1 set

7113.000

Documents

Seite1010 1013 HB30englisch Accessories Cable Attachment Earthing