SECURITY SENSORS - TAKEXtakex.com/.../downloads/supp_info/TAKEX_security_sensors_TAus.pdf · SECURITY SENSORS TAKEX is a leading ... 30V (AC/DC) 0.5A Max Supply Voltage 10 to 30V

PHOTOELECTRIC BEAMS

MICROWAVE SENSORS

PASSIVE INFRARED SENSORS

FLAME SENSORS

AUTO DOOR SENSORS

SPEECH WARNING DEVICES

SECURITY SENSORSTAKEX is a leading Japanese manufacturer of Security Sensors, specialising in Active Infrared Beams for Perimeter Protection, and Outdoor PIR for CCTV activation and Intruder Detection. With more than 50 years of engineering experience, we are proud to be specified at the highest level of Royal, Government and Military organisations worldwide.

C

M

Y

CM

MY

CY

CMY

K

PHOTOELECTRIC BEAM SENSORSPhotoelectric Beam Sensors 1 - 5Photoelectric Beam Sensors for Tower Enclosures 3Miniature Photoelectric Beam Sensors 6 - 7Explosion-Proof Photoelectric Beam Sensor 7Shutter Sensors 7Solar Powered Beam Sensor Systems 8

FLAME SENSORSFlame Sensors 16 - 17

n INDEX 25

Passive Infrared Sensors (for Outdoor Use) 10 - 11Passive Infrared Sensors 12 - 15

51Anti-Masking Base Unit


Glass Sensors 17Sensor Switch 21

OTHER SENSORS

For Photoelectric Beam Sensors 22For Shutter Sensors 22For Outdoor Passive Infrared Sensors 23For Passive Infrared Sensors 23

ACCESSORIES

www.takex.com

9Microwave Sensors9Combination Sensors

MICROWAVE SENSORS

Auto Door Sensors (Photoelectric Beam) 18 - 1991Auto Door Sensor (passive Infrared)

AUTO DOOR SENSORS

Speech Warning Devices 20Voice Speaker 21


Beam Tower Enclosures 24

C

M

Y

CM

MY

CY

CMY

K

PXB-50HF (Quad Beam, Outdoor 50m)PXB-100HF (Quad Beam, Outdoor 100m)PXB-200HF (Quad Beam, Outdoor 200m)

• 50,000 lux light immunity• Intelligent quad beam

• 4 frequencies selectable• Target color• Lightning protection

Detection System Near infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)

Alarm OutputDry contact relay output form CContact action: Interruption time (Min.2sec.)Contact capacity: 30V (AC/DC) 1A (resistive load)Protective resistor

Power Supply 12 to 30V DC (Non-polarity)Current Consumption 30mA to 34mA

Features• Double modulation beam• Wide beam• Upper/lower beam switch• Response time adjustment

Ambient Temperature −31°F to +151°F (−35°C to +66°C)Optional Pole, Heater, Pole-side coverExternal Dimensions W114mm × H450mm × D100mmIP Rating 65Weight Transmitter: 1,500g Receiver: 1,550g

PB-IN-50HF (Quad Beam, Outdoor 50m)PB-IN-100HF (Quad Beam, Outdoor 100m)PB-IN-200HF (Quad Beam, Outdoor 200m)


• 4 frequencies selectable• Target color


Alarm OutputDry contact relay output: 1cReset time: Interruption time (Min. 2sec)30V (AC/DC) 1A Max

Supply Voltage 12 to 30V DC (non-polarity)Power Consumption 95mA to 120mA

Features• Double modulation beam• Beam power selection• Auto-gain lock• Frost proof cover

Ambient Temperature −31°F to +151°F (−35°C to +66°C)

Optional Pole, poleattachment, pole-side cover, heater, flush mount housing

External Dimensions W104mm × H390mm × D98mmIP Rating 55Weight Transmitter 1,200g Receiver 1,300g

PXB-50F (Quad Beam, Outdoor 50m)PXB-100F (Quad Beam, Outdoor 100m)PXB-200F (Quad Beam, Outdoor 200m)


• Target color• Lightning protection

Detection System Near infrared pulsed beam interruption (TR-RE 4 beam simultaneous interruption)

Alarm OutputDry contact relay output form CContact action: Interruption time (Min.2 sec.)Contact capacity: 30V (AC/DC) 1A (resistive load)Protective resistor



Ambient Temperature −31°F to +151°F (−35°C to +66°C)Optional Pole, Heater, Pole-side coverExternal Dimensions W114mm × H450mm × D100mmIP Rating 65Weight Transmitter 1,500g Receiver 1,550g

PB-50F (Quad Beam, Outdoor 50m)PB-100F (Quad Beam, Outdoor 100m)PB-200F (Quad Beam, Outdoor 200m)

• Quad beam• 50,000 lux light immunity• Target color


Alarm OutputDry contact relay output N.O./N.C. selectableReset time: Interruption time (Min. 2sec)30V (AC/DC) 1A Max

Supply Voltage 12 to 30V DC (non-polarity)

Power Consumption 95mA to 120mA

Features • Double modulation beam• Frost proof cover


Optional Pole, poleattachment, pole-side cover, heater, flush mount housing

External Dimensions W104mm × H390mm × D98mm

IP Rating 55

Weight Transmitter 1,200g Receiver 1,300g

PHOTOELECTRIC BEAM SENSORS

www.takex.com 01

C

M

Y

CM

MY

CY

CMY

K

TXF-125E (Quad Beam)(Coverage: Outdoor 100m or less)

• Battery operated• 4 frequencies selectable• 4 detection distances selectable• Target color• Lightning Protection

Detection System Near infrared pulsed beam interruption(TR-RE 4 beam simultaneous interruption)

Protection Distance 4 Distances Selectable (25/50/75/100m)

Alarm Output Dry contact relay output form CContact capacity: DC 30V 0.1A (resistive load)

Power Supply 3.6V DC (SAFT LS33600 recommended)

Features

• Single modulation beam• Wide beam• Upper/lower beam switch• Battery saving• Repeat output• Battery sharing

Ambient Temperature −13°F to +140°F (−25°C to +60°C)Optional Pole, Pole coverExternal Dimensions W114mm × H450mm × D135mmIP Rating 65Weight (Batteries excluded) Transmitter 1,500g Receiver 1,550g

PXB-100ATC (Quad Beam)(Coverage: Outdoor 100m)

• For anti crawl

• 4 frequencies selectable• Synchronized high power beam• Lightning protection• Target color

Detection System Near infrared pulsed beam interruption system (Anti-crawling, Anti-corrosion)

Alarm OutputDry contact relay output N.O./N.C. selectableContact action: Interruption time (Min.2sec.)Contact capacity: 30V (AC/DC) 1A (resistive load)Protective resistor

Power Supply 12 to 30V DC (Non-polarity)Current Consumption Transmitter: 27mA Receiver: 48mA


Ambient Temperature −31°F to +151°F (−35°C to +66°C)Optional Pole, Heater, Pole-side coverExternal Dimensions W114mm × H450mm × D100mmIP Rating 65Weight Transmitter: 1,400g Receiver: 1,500g

PB-IN-100AT (Quad Beam)(Coverage: Outdoor 100m)

• For anti crawl• 50,000 lux light immunity• 4 frequencies selectable

Detection System Near infrared pulsed beam interruption system (Anti-crawling)

Alarm OutputDry contact relay output: 1cReset time: Detection time + delay time (approx. 1.5sec)30V (AC/DC) 1A Max

Supply Voltage 12 to 30V DC (non-polarity)Power Consumption 85mA

Features• Double modulation beam• Auto-gain lock• Dual response time system


Optional Pole, poleattachment, pole-side cover, heater, housing

External Dimensions W104mm × H390mm × D98mmIP Rating 55Weight Transmitter 1,200g Receiver 1,300g

PB-100ST (Twin Beam)(Coverage: Outdoor 100m)

• 50,000 lux light immunity• Automatic Gain Control• Frost and dew proof cover

Detection SystemNear infrared pulsed beam interruption system (TR-RE 2 beam simultaneous interruption)

Alarm Output

Dry contact relay output: 1cReset time: Detection time + delay time (approx. 1sec)30V (AC/DC) 0.5A Max


Power Consumption 80mA or less


Optional Pole, poleattachment, pole-side cover, heater, housing


IP Rating 55

Weight Transmitter/Receiver 1,200g each


: Wireless ready version

www.takex.com02

• 50,000 lux light immunity

C

M

Y

CM

MY

CY

CMY

K

PXB-50HF-KH (Quad Beam, Outdoor 50m)PXB-100HF-KH (Quad Beam, Outdoor 100m)PXB-200HF-KH (Quad Beam, Outdoor 200m)

* Beam Tower version of PXB-50HF/100HF/200HF


Alarm Output

Dry contact relay output form CContact action: Interruption time (Min.2sec.)Contact capacity: 30V (AC/DC) 1A (resistive load)Protective resistor


Features

• Double modulation beam• Wide beam• Upper/lower beam switch• Response time adjustment


PB-50HF-KH (Quad Beam, Outdoor 50m)PB-100HF-KH (Quad Beam, Outdoor 100m)PB-200HF-KH (Quad Beam, Outdoor 200m)

* Beam Tower version of PB-IN-50HF/100HF/ 200HF

Detection SystemNear infrared pulsed beam interruption system (TR-RE 4 beam simultaneous interruption)

Alarm OutputDry contact relay output: 1cReset time: Interruption time (Min. 2sec)30V (AC/DC) 1A Max


Features

• Double modulation beam• Beam power selection• Auto-gain lock• Frost proof cover


PXB-100ATC-KH (Quad Beam)(Coverage: Outdoor 100m)

* Beam Tower version of PXB-100ATC

Detection System Near infrared pulsed beam interruption system (Anti-crawling, Anti-corrosion)

Alarm OutputDry contact relay output N.O./N.C. selectableContact action: Interruption time (Min.2sec.)Contact capacity: 30V (AC/DC) 1A (resistive load)Protective resistor

Power Supply 12 to 30V DC (Non-polarity)

Current Consumption Transmitter: 27mA Receiver: 48mA



PB-100AT-KH (Quad Beam)(Coverage: Outdoor 100m)

* Beam Tower version of PB-IN-100AT

Detection System Near infrared pulsed beam interruption system (Anti-crawling)

Alarm Output

Dry contact relay output: 1cReset time: Detection time + delay time (approx. 1.5sec)30V (AC/DC) 1A Max


Power Consumption 85mA

Features• Double modulation frequency• Auto-gain lock• Dual response time system


TXF-125E-KH (Quad Beam)(Coverage: Outdoor 100m or less)

* Beam Tower version of TXF-125E


Protection Distance 4 Distances Selectable (25/50/75/100m)

Alarm OutputDry contact relay output form CContact capacity: DC 30V 0.1A (resistive load)

Power Supply 3.6V DC (SAFT LS33600 recommended)

Features

• Single modulation beam• Upper/lower beam switch• Wide beam• Battery saving• Repeat output• Battery sharing


PHOTOELECTRIC BEAM SENSORS FOR TOWER ENCLOSURES


www.takex.com 03

C

M

Y

CM

MY

CY

CMY

K

PB-20TE (Twin Beam)(Coverage: Outdoor 20m / Indoor 40m)



• Intelligent twin beam• 50,000 lux light immunity• 4 frequencies selectable• Target color

Detection System Near infrared (through type)

Alarm OutputDry contact relay output: 1cReset time: Detection time + delay time (approx. 1 ~ 3sec)30V (AC/DC) 0.5 A Max


Features• Double modulation beam• Frost proof cover• AGC circuit• Monitor jack output

Ambient Temperature −13°F to +140°F (−25°C to +60°C)Mounting Position Outdoor, indoorOptional Pole, Pole cover, housingExternal Dimensions W73mm × H170mm × D71.5mmIP Rating 54Weight Transmitter: 380g Receiver: 400g

PB-30TK(K) (Twin Beam)(Coverage: Outdoor 30m / Indoor 60m)



• Twin beam• 50,000 lux light immunity


Alarm OutputDry contact relay output: 1cReset time: Detection time + delay time (approx. 1 ~ 3sec)30V (AC/DC) 0.5A Max


Features• Double modulation beam• Frost proof cover• AGC circuit• Monitor jack output

Ambient Temperature −13°F to +140°F (−25°C to +60°C)Mounting Position Outdoor, indoorOptional Pole, Pole cover, housingExternal Dimensions W73mm × H170mm × D71.5mmIP Rating 54Weight Transmitter: 380g Receiver: 400g

PB-30SU (Flush mount type)(Coverage: Indoor 30m)

• Unassuming design• Selectable beam power• AGC circuit


Alarm Output

Dry contact relay output: N/C or N/OReset time: Detection time + delay time (approx. 2sec)24V (AC/DC) 0.25A Max




Mounting Position Indoor


Weight 90g

PH-200SE(Coverage: Outdoor 200m)

PH-600SE(Coverage: Outdoor 600m)

• External environmental diagnostic function


Alarm Output

Dry contact relay output: N/CReset time: Detection time + delay time (approx. 2sec)30V (AC/DC) 0.5A Max

Supply Voltage 10.5 to 30V DC (non-polarity)



Mounting Position Outdoor, indoor

Optional SEC Circuit board, pole, long hood

External Dimensions W124mm × H170mm × D240mm (PH-200SE)

Weight 2,000g (200SE) · 8,000g (600SE)


www.takex.com04

C

M

Y

CM

MY

CY

CMY

K

5

PR-1B(Coverage: 1m)

• Motionless objects can be detected• Direct reflection system

(no reflector reguired)• Sensitivity abjustment• Slim and compact size• Flush mount is available with optional attachment

Detection System Near infrared (direct reflection type)

Alarm Output

Dry contact relay output: 1cReset time: Detection time + delay time (approx. 0.5sec)30V (AC/DC) 0.5A Max





Optional Flush mount plate, L bracket

External Dimensions W62mm × H106mm × D23.5mm

Weight 75g

PR-5B(Coverage: 5m)

• Single beam of indoor use for short distance• Reflection type

Detection System Near infrared (reflection type)

Alarm Output

Dry contact relay output: 1cReset time: Detection time + delay time (approx. 1sec)30V (AC/DC) 0.5A Max





Optional Flush mount plate, L bracket


Weight Sensor 90g Reflector 50g

PR-10B(Surface mount type)

PR-10BU(Flush mount type)(Coverage: 10m)

• Single beam of indoor use for short distance• Reflection type


Alarm OutputDry contact relay output: N/CReset time: approx. 1sec30V (AC/DC) 0.5A Max





Optional L bracket


Weight Sensor 220g Reflector 90g (PR-10B)

PR-11BE(Coverage: outdoor 11m, indoor 15m)

Protection distance (bet* ween sensor/reflector) should be placed in the rated range


Alarm OutputDry contact relay output: N/O or N/C selectable30V (AC/DC) 0.5A Max



Features • Tamper output• Monitor jack output


Mounting Position Outdoor / Indoor

External Dimensions Sensor W73mm × H170mm × D71.5mmReflector W93mm × H231.5mm × D100mm

Weight Sensor 430g Reflector 490g


www.takex.com 05

C

M

Y

CM

MY

CY

CMY

K

PB-10NSSingle beam(Coverage: 10m)

• Sensitivity adjustment(Set the sensitivity adjustment volume depending on the protection distance.)


Alarm Output

Dry contact relay output: N/O or N/C selectableReset time: Detection time + delay time (approx. 1sec.)30V (AC/DC) 0.3A Max




Mounting Position Indoor or semi-outdoor

External Dimensions Sensor 15mm dia × 16mmAmplifier W45mm × H120mm × D29mm

Weight Sensor 120g Amplifier 95g

PB-10TNSTwin beam(Coverage: 10m)

• Sensitivity adjustment(Set the sensitivity adjustment volume depending on the protection distance.)


Alarm Output






External Dimensions Sensor 15mm dia × 16mmAmplifier W45mm × H120mm × D29mm


PB-4RNSSingle beam reflective(Coverage: 4m)

• Sensitivity adjustment(Set the sensitivity adjustment volume depending on nonsensitive zones.)


Alarm Output






External DimensionsSensor 15mm dia × 16mmAmplifier W45mm × H120mm × D29mmReflector W69mm × H84mm × D13mm


PB-4RTNSTwin beam reflective(Coverage: 4m)

• Sensitivity adjustment(Set the sensitivity adjustment volume depending on nonsensitive zones.)


Alarm Output






External DimensionsSensor 15mm dia × 16mmAmplifier W45mm × H120mm × D29mmReflector W69mm × H84mm × D13mm


MINIATURE PHOTOELECTRIC BEAM SENSORS <Amplifier separate type>

www.takex.com06

C

M

Y

CM

MY

CY

CMY

K

MINIATURE PHOTOELECTRIC BEAM SENSOR <Amplifier separate type>

DS-6NDSingle beam(Coverage: 6m)

• Sensitivity adjustment(Set the sensitivity adjustment control depending on the protection distance.)


Alarm Output

Dry contact relay output: N/OReset time: Detection time + delay time (approx. 1sec.)30V (AC/DC) 0.3A Max





External Dimensions Sensor 15mm dia × 16mm Amplifier W45mm × H94mm × D29mm


EXPLOSION-PROOF PHOTOELECTRIC BEAM SENSOR

PB-100EX(Coverage: Outdoor 100m)



• Ideal for monitoring hazardous locations.

Detection System Near infrared (through type)Explosion-proof Construction

Intrinsically safe explosion proofing + pressure resistant explosion proof construction

Applicable Locations Class 1 and 2 hazardous locations

Applicable Gases 2G4(Explosion class: 2) (Ignition class: G4)

Labor Ministry Approval No.

Transmitter: No.T62011Receiver: No.T62010

Alarm OutputDry contact relay output: N/CReset time: Detection time + deray time (approx 1 sec)220V (AC/DC) 0.5A or 10VA Max

Supply Voltage 100V AC 50/60Hz or 200V AC 50/60HzPower Consumption 5.5VAAmbient Temperature +14°F to +104°F (−10°C to +40°C)External Dimensions W198mm × H258mm × D350mmWeight 20,000g ~ 25,000g

SHUTTER SENSORS

PR-S3(Distance: 5 to 40cm)

• Double beam• Built-in operation LED output point• Built-in attenuation LED


Alarm OutputDry contact relay output: 1cResponse time: 1 to 2sec30V (AC/DC) 0.5A Max

Supply Voltage 10 to 30V DC (non-polarity)Power Consumption 35mAFeatures LED lights upAmbient Temperature −4°F to +122°F (−20°C to +50°C)Mounting Position Shutter case, lintel (indoor)Optional Sensor bracket, sheet bracketExternal Dimensions W94mm × H50mm × D40mmWeight 115g

SH-M5(Distance: 3 to 12cm)

Detection System Magnetic modulation

Alarm OutputDry contact relay output: 1cResponse time: 1 to 2sec30V (DC) 0.5A Max

Supply Voltage 10 to 30V (non-polarity)



Mounting Position Shutter (indoor)

Optional Sensor bracket, sheet bracket


Weight 95g

www.takex.com 07

C

M

Y

CM

MY

CY

CMY

K

SOLAR POWERED BEAM SENSOR SYSTEMS

TAKEX new system saves a lot of installation work.This system consists of PXB-100SW/PB-IN-75SW : Beam sensor & BA-6SLA : Solar panel + power unit

With this system, no wiring will be required for transmitter. And only signal wiring will be required for receiver.

PXB-100SW (Quad Beam)(Coverage: Outdoor 100m)

• Intelligent quad beam• Low current consumption• Double modulation beam• 4 frequencies selectable• Target color• Lightning Protection


Alarm Output

Dry contact relay output N.O./N.C. selectableContact action: Interruption time (Min.2 sec.)Contact capacity: 30V(AC/DC) 1A (resistive load)Protective resistor

Power Supply 5 to 30V DC (with polarity)

Power Cponsumption

5V to 8V DC: 6mA (TR 3.7/RE 2.3mA) or

less when armed10V to 30V DC: 8.3mA (TR 5.2/RE 3.1mA) or

less when armedAmbient Temperature −31°F to +151°F (−35°C to +66°C)External Dimensions W114mm × H450mm × D100mmIP Rating 65Weight (Batteries excluded) Transmitter 1,500g / Receiver 1,550g

PB-IN-75SW (Quad Beam)(Coverage: Outdoor 75m)

• Extreamly low current consumption• 4 frequencies selectable• Double modulation beam• Automatic gain lock


Alarm Output

Dry contact relay form CReset time: Detection time + delay time (approx. 2secs)30V (AC/DC) 1A

Power Supply 5 to 8V DC or 10 to 30V DC (with polarity)

Power Consumption

5 to 8V DC: 6mA (TR. side 3.7mA) or less

when armed10 to 30V DC: 25mA (TR. side 15mA) or less

when armedAmbient Temperature −13°F to +140°F (−25°C to +60°C)External Dimensions W104mm × H390mm × D98mmIP Rating 55Weight Transmitter 1,200g / Receiver 1,300g

BA-6SLA (Solar Battery Kit)

* This kit consists of ; 1 Solar panel unit and 1 Power unit. (Battery is not included)

Power output

3V DC 50mA or less for Wireless transmitter6V DC 12mA or less for Beam sensor

Battery(not included)

Capacity: 6V DC 7.2 AhSize: L 149mm - 153mm

W 32mm - 36mmH 92mm - 96mm

Solar Panel OutputVoltage: Max 8.4V (when Sunlight 1kW/m2)Current: MAX 0.18A (ditto)

Ambient Temparature +14°F to +122°F (−10°C to +50°C)

IP Rating 43

Weight Power Unit: 1,300gSolar panel: 600g (wire excluded)

www.takex.com08

C

M

Y

CM

MY

CY

CMY

K

COMBINATION SENSORS

COM-IN-50HFL/HFH(Coverage: Outdoor 50m)

• Combination of photoelectric beam and microwave• And-gated or Or-gated available• 4 frequencies selectable• Environmental module

Detection System Photoelectric beam + Microwave

Alarm OutputDry contact relay output 1CReset time: Detection time + delay time (approx. 2sec.)30V (AC/DC) 1A Max

Supply Voltage 12 to 30V DCPower Consumption 165mA

Features

Alarm Output: And-gated or Or-gated availableEnvironmental Output4 frequencies selectableAutomatic gain control (AGC) circuitMonitor jack

Optional Pole cover (BP-50COM)External Dimensions W104mm × H627mm × D102mmWeight Transmitter 1,850g Receiver 2,000g

COM-IN-100AL/AH(Coverage: Outdoor 100m)

• Combination of photoelectric beam and microwave• And-gated or Or-gated available• 4 frequencies selectable• Environmental module

Detection System Photoelectric beam + Microwave

Alarm OutputDry contact relay output 1CReset time: Detection time + delay time (approx. 2sec.)30V (AC/DC) 1A Max

Supply Voltage 12 to 30V DCPower Consumption 175mA

Features

Alarm Output: And-gated or Or-gated availableEnvironmental Output4 frequencies selectableAutomatic gain control (AGC) circuitMonitor jack

Optional Pole cover (BP-100COM)External Dimensions W130mm × H703mm × D126mmWeight Transmitter 2,120g Receiver 2,270g

MICROWAVE SENSORS

MW-50L/H(Coverage: Outdoor 50m)

• 2 frequencies (H) and (L) available.• Automatic Gain Control circuit.• Adjustment mode switch available.

Model MW-50L MW-50H

Detection System Microwave 24.11GHz Microwave 24.17GHz

Alarm Output Dry contact relay output 1C30V (AC/DC) 0.5A or less

Supply Voltage 12 to 30V DC


FeaturesMonitor outputAdjustment mode switchAutomatic Gain Control circuit

Optional Pole cover (BP-50MW)


Weight Transmitter 710g Receiver 760g

MW-100AL/AH(Coverage: Outdoor 100m)

• 2 frequencies (H) and (L) available.• Automatic Gain Control circuit.• Adjustment mode switch available.

Model MW-100AL MW-100AH

Detection System Microwave 24.11GHz Microwave 24.17GHz

Alarm Output Dry contact relay output 1C30V (AC/DC) 0.5A or less



FeaturesMonitor outputAdjustment mode switchAutomatic Gain Control circuit

Optional Pole cover (BP-100MW)


Weight Transmitter 930g Receiver 980g

www.takex.com 09

C

M

Y

CM

MY

CY

CMY

K

MS-12TE(Dual Zone: Variable Angle up to 90 degrees)

MS-12FE(2 Dual Zone: Variable Angle up to 180 degrees)

Model MS-12TE MS-12FE

Detection SystemPassive infrared

Twin Twin × 2

Alarm OutputDry contact relay output: N/C or N/O selectable 30V (AC/DC) 0.5A MaxReset time: approx 2sec. ~ 5min.


Power Consumption 35mA 40mA


Mounting Position Indoor/Outdoor


IP Rating 54

Weight 390g 470g

OMS-12FE(Dual Zone:Detection Areaup to 180 degrees)

• Back tamper

Detection System Passive infrared (Twin × 2)

Alarm Output

Dry contact relay output N.C./N.O. selectable• Contact capacity: 30V (AC/DC),

0.2A MAX. (Resistive load)• Contact operation: Detection

time (2sec)

Tamper OutputDry contact relay output N.C.• Contact capacity: 30V (AC/DC),

0.1A MAX. (Resistive load)Supply Voltage 9 to 28V DC (non-polarity)Current Consumption 20mA MAX.Ambient Temperature −4°F to +122°F (−20°C to +50°C)External Dimensions W94mm × H234mm × D77.5mmIP Rating 54Weight 470g

TX-114FR/114TR

TX-114SR

TX-114FR(2 Dual Zone: Variable Angle up to 180 degrees)

TX-114TR/TX-114SR(Dual Zone: Variable Angle up to 90 degrees)

• Battery operated

Model TX-114FR TX-114TR TX-114SR

Detection SystemPassive infrared

Twin × 2 Twin

Operation

10VDC · 0.01A Max• Alarm output• Tamper output• Trouble output

10VDC · 0.01A Max• Alarm output

(Blue wires)• Tamper output

(Green wires)• Trouble output

Supply Power 3V to 9V DC Alkaline or Lithium Battery

Current Consumption35µA 25µA

5mA/3V (Test mode)Ambient Temperature −4°F to +122°F (−20°C to +50°C)


W80mm × H234mm × D88mm

IP Rating 54Weight 620g 560g 400g

PIR-T15WE(W)/(G)Wide angle protection (Coverage 15m)

Detection System Passive infrared (Triple mirror)

Alarm OutputDry contact(semi-conductor) output N.C./N.O.24V (AC/DC) 0.25A (resistive load)

Supply Voltage 9 to 28V DC (non-polarity)Power Consumption Max. 40mA

Features

• External output• Sensitivity selection• Operation mode selection (4 modes)• 2m to 6m Installation height• Lightning Protection• Pet immunity • Back tamper

Ambient Temparature −13°F to +131°F (−25°C to +55°C)Mounting Position Indoor or outdoor wallIP Rating 55Weight 600g

3.8'

(1.2

5m)

1.2'

(0.3

5m)

1.3'

(0.4

m)

3.8'(1.25m)

1.3'(0.4m)

1.3'(

0.4m

)9°6°

15°

20°

26°

33.5°42

.5°52°61°72° 49'(15m)

33'(10m)

16'(5m)

0

9'(2.7m)

80°

[Side view]

[Top view]

In the setting of installationheight : 9' (2.7m)distance : 50' (15m)

Cross-section surface of the center zone

PASSIVE INFRARED SENSORS (For outdoor use)


www.takex.com10

C

M

Y

CM

MY

CY

CMY

K

PIR-T15AM(W)/(G)Wide angle protection (Coverage 15m)

Detection System Passive infrared (Triple mirror)

Alarm OutputDry contact(semi-conductor) output N.C./N.O.24V (AC/DC) 0.25A (resistive load)

Supply Voltage 9 to 28V DC (non-polarity)Power Consumption Max. 50mA

Features

• External output• Sensitivity selection• Operation mode selection (4 modes)• 2m to 6m Installation height• Lightning Protection• Pet immunity • Back tamper• Anti-masking

Ambient Temparature −13°F to +131°F (−25°C to +55°C)Mounting Position Indoor or outdoor wallIP Rating 55Weight 600g

MS-100E

• 4 detection patterns available(Wide angle · Vertical curtain · long range · Spot)

• Possible mounting on ceiling or wall• Possible mounting on pole and metal

plate (with optional accessories)• Rain-proof housing for outdoor

installation

Detection System Passive infrared (Twin)

Alarm OutputDry contact relay output: N/C or N/O selectableReset time: approx 2sec.30V (AC/DC) 0.5A Max

Supply Voltage 10.5 to 28V DC (non-polarity)Power Consumption 30mA

Detection AreaWide angle 10m Max.Vertical curtain 10m Max.Long range 20m Max.Spot 3m Max.

Ambient Temperature −4°F to +122°F (−20°C to +50°C)Mounting Position Wall, ceiling, pole, metal plate (indoor, outdoor)

Optional Pole cover, Pole attachment, Wall mount bracket, Wall / Ceiling attachment, Magnetic sheet.

External Dimensions W77mm × H171mm × D70mmIP Rating 44Weight 220g

PA-15WEWide angle protection (Coverage: 15m)

PA-30NELong range protection (Coverage: 30m)

• Rain-proof housing• Attachable to ceiling, wall, pole• Easy angle adjustment


Alarm OutputDry contact relay output: 1cReset time: approx 2sec.30V (AC/DC) 0.5A Max




Mounting Position Indoor, outdoor

Optional Pole attachment, Vise

External Dimensions 72mm dia × 211mm

IP Rating 43

Weight 500g

PIR-30WEWide angle protection(Coverage: 30m)

PIR-50NEVertical curtain protection (Coverage: 50m)

• Protection area designed especially for high mounting positions

Detection System Passive infrared

Alarm Output Dry contact (semi-conductor) output: N.C./N.O.24V (AC/DC) 0.25A (resistive load)


Features

• Low supply voltage alarm• Tamper signal• LED control (L/C)• Alarm LED (ON/OFF)• Sensitivity adjustable between

30% and 170%Ambient Temperature −4°F to +122°F (−20°C to +50°C)Mounting Position Indoor or outdoor wallOptional Water-proof grommet, Tapping screwExternal Dimensions 184.5mm dia. × 136mmIP Rating 55Weight 1,600g

3.8'

(1.2

5m)

1.2'

(0.3

5m)

1.3'

(0.4

m)

3.8'(1.25m)

1.3'(0.4m)

1.3'(

0.4m

)9°6°

15°

20°

26°

33.5°42

.5°52°61°72° 49'(15m)

33'(10m)

16'(5m)

0

9'(2.7m)

80°

[Side view]

[Top view]

In the setting of installationheight : 9' (2.7m)distance : 50' (15m)

Cross-section surface of the center zone

PASSIVE INFRARED SENSORS (For outdoor use)

www.takex.com 11

C

M

Y

CM

MY

CY

CMY

K


PA-6612E"TWIN MIRROR" PIRWide angle protection(Coverage: 12m)

• Drastically reduced false alarm caused by small animals, with new twin optical system.

Detection System Passive infrared (Twin × 2)

Alarm Output

Dry contact (semi-conductor) relay output N/O or N/C selectableReset time: 2sec.24V (AC/DC) 0.25A Max

Supply Voltage 10.5V to 28V DC (non-polarity)


Features Pulse countLED control

Ambient Temperature +5°F to +131°F (−15°C to +55°C)

Mounting Position Ceiling, wall (indoor)

Optional Ceiling / wall mount attachment


Weight 135g

BU-6800

PA-6805ESpot protection(Coverage: H4.9m × 4m dia)

PA-6810E360° Round protection(Coverage: H4.9m × 15.2m dia)


Alarm Output

Dry contact (Semi-conductor) output: N/C or N/O selectableReset time: approx. 2sec.24V (AC/DC) 0.25A Max


Power Consumption 25mA: N/C

Features Alarm LED controlPulse count





Weight 110g

BU-6800

PA-6812EWide angle protection(Coverage: 12m)

PA-6820EVertical curtain protection(Coverage: 20m)


Alarm Output



Power Consumption 25mA: N/C

Features Alarm LED controlPulse count (PA-6812E only)





Weight 110g



• Protection area designed especially for high mounting positions


Alarm OutputDry contact (semi-conductor) output: N.C./N.O.24V (AC/DC) 0.25A (resistive load)


Features

• Trouble alarm • Low supply voltage alarm• Tamper output • LED control• Area control • Alarm LED (ON/OFF)• Sensitivity adjustable for 60/80/100/120%• Pulse count selectable for 1/2/3/4

(PA8410E only)Ambient Temperature −4°F to +122°F (−20°C to +50°C)Mounting Position Indoor or outdoor ceilingOptional Water-proof grommet, Tapping screwExternal Dimensions 184.5mm dia × 136mmIP Rating 55Weight 950g

www.takex.com12

C

M

Y

CM

MY

CY

CMY

K


BU-7000



Detection System Passive infrared (Quad)

Alarm OutputDry contact relay output: 1cReset time: approx. 2sec.30V (AC/DC) 0.1A Max



Features Alarm memory



Optional Flush mount attachment


Weight 330g

BU-7000

PA-7100E360° Round protection(Coverage: 100m2)

Detection System Passive infrared (Two quad)

Alarm OutputDry contact relay output: 1cReset time: approx. 2sec.30V (AC/DC) 0.1A Max



Features Manual memory


Mounting Position Ceiling (indoor)

Optional Flush mount attachment


Weight 330g

BU-5300



• Slight motion detection.


Alarm OutputDry contact relay output: N/O or N/CselectableReset time: approx. 2sec.30V (AC/DC) 0.25A Max

Supply Voltage 9.5V to 30V DC (non-polarity)Power Consumption 25mA

Features

Fuzzy LogicTrouble Output• Malfunction of equipment• Low voltage• Failure to replace• Self-check up of alarm contact output

Ambient Temperature +14°F to +122°F (−10°C to +50°C)Mounting Position Ceiling, wall (indoor)Optional Flush mount attachment, Level checkerExternal Dimensions 147.3mm dia × 59mmWeight 250g

PA-6412PI (PET IMMUNE)Wide angle protection(Coverage: 12m)

• 18 kg pet immunity with multiple zone technology


Alarm Output


Supply Voltage 10 to 18VDC (non-polarity)Power Consumption 25mA

FeaturesPulse countLED disable switchLow voltage alarm

Ambient Temperature +5°F to +131°F (−15°C to +55°C)Mounting Position Indoor ceilingOptional Ceiling / wall mount attachmentExternal Dimensions 147mm dia × 60mmWeight 160g

www.takex.com 13

C

M

Y

CM

MY

CY

CMY

K


PA-370Wide angle / Vertical curtain protection(lens replacement)(Coverage: H5m × W6.7m)


Alarm Output

Dry contact (semi-conductor) relay outputN/O or N/C selectableReset time: 2sec.24V (AC/DC) 0.25A Max


FeaturesPulse countLED disable switchLow voltage alarmAuto reset memory

Ambient Temperature +5°F to +131°F (−15°C to +55°C)Mounting Position Ceiling, wall (indoor)

Optional Ceiling / wall mount attachment, Line protection lens

External Dimensions 120mm dia × 45mmWeight 120g



Alarm Output




Ambient Temperature +5°F to +131°F (−15°C to +55°C)Mounting Position Wall, wall corner (indoor)Optional Ceiling / wall mount attachmentExternal Dimensions W70mm × H110mm × D45mmWeight 120g

PA-450PI (PET IMMUNE)Wide angle protection(Coverage: 11m)

• 20kg pet immunity with multiple zone technology


Alarm Output





PA-460EVertical curtain protection(Coverage: 16.5m)


Alarm Output



FeaturesLED disable switchLow voltage alarmAuto reset memory


www.takex.com14

C

M

Y

CM

MY

CY

CMY

K

PA-470LWide angle / Vertical curtain protection(lens replacement)• Wide angle protection (Coverage: 16m)• Vertical curtain protection (Coverage: 20m)


Alarm Output

Dry contact relay output: N/C or N/O(changeover on switch)Reset time: approx. 2sec.30V (AC/DC) 0.25A Max


FeaturesMemory controlLED controlLow voltage

Ambient Temperature +14°F to +122°F (−10°C to +50°C)Mounting Position Wall, wall corner (indoor)Optional Ceiling, wall mount attachmentExternal Dimensions W90mm × H127mm × D62.5mmWeight 165g

PA-480SWide angle protection (180 )(Coverage: 8m)


Alarm OutputDry contact relay output: N/CReset time: approx. 2sec.30V (AC/DC) 0.1A Max


FeaturesLow voltage alarmArea adjustment(downward 5 positions)

Ambient Temperature +14°F to +122°F (−10°C to +50°C)Mounting Position Wall, wall corner (indoor)Optional Ceiling / wall mount attachmentExternal Dimensions W90mm × H127mm × D62.5mm

Weight 165g




Alarm Output

Dry contact relay output: N/C or N/O(changeover on switch)Reset time: approx. 2sec.30V (AC/DC) 0.25A Max


FeaturesSlight motion detectionMemory control LED controlTrouble alarm



ANTI-MASKING BASE UNIT

BP-150AE

• Anti-masking functionality• Tamper output

Detection System Direct reflection system by near infrared

Trouble Alarm Output

Dry contact (Semi-conductor) output N/CRating: 24V AC/DC Max. 0.25AContact protection resistor 3.3 ohmsOR-gated with tamper output

Supply Voltage 10.5 to 30VDC


Compatible Models PA-6812E, PA-6820E, PA-6805E, PA-6810E, PA-6612E, FS-2000E

Mounting Position Indoor ceiling


Weight 120g

www.takex.com 15

C

M

Y

CM

MY

CY

CMY

K

FLAME SENSORS

FS-1000E(Ultraviolet rays detection system)

• High sensitivity an instant flame detection• External output system extension• Versatile, high quality and low cost

Detection System Ultraviolet rays detection

Detection Distance 10m (7cm lighter flame 10m ahead)

Power Supply Alkali battery (LR-6) × 2 or 9 to 30V DC


External Output

Open collector (semi-conductor) output N/O30V DC · 50mA MaxDelay time (approx. 10sec)



Weight 200g

FS-2000E(Ultraviolet rays detection system)

• High sensitivity an instant flame detection• Detection area adjustment, Tamper, Alarm

memory, Form C output are added to FS-1000E


Detection Distance 10m (7cm lighter flame 10m ahead)


Power ConsumptionStand-by: 25mA or lessAlarm: 75mA or less with buzzer 40mA or less without buzzer

External OutputDry contact relay Form CAction: offdelay 2sec.Capacity: 30V (AC/DC) 0.3A



Weight 150g

FS-3500E(W)/(B)

• Instant flame detection• Selectable warning message among 5

languages and 2 kinds• Repeated message• Battery operation

Detection System Ultraviolet rays detectionDetection Distance 10m (7cm lighter flame)

Power SupplyType-AA alkaline battery (LR6) 2pcs (not included)External wiring DC10-30V (Polarized)

Power Consumption Stand by: 40mA or lessAlarm: 300mA or less

Battery Life Type-AA alkaline battery: Approx. 2 years (Stand by)

Warning Message "Japanese" "English" "Chinese""Korean" "Spanish"

External OutputRelay contact output N.O./N.C.Detection time plus 2 sec.Output 30V DC 0.1A

Mounting Position IndoorWeight 180g (battery excluded)

FS-5000E(Ultraviolet rays detection system - Outdoor)

• Instant flame detection• Rain-proof housing• Day/Night discernment function• Detection time setting• Output time set up


Detection Distance Abt.10meters with 7cm flame

Power Supply DC10 - 30V (Non-polarity)


External OutputDry contact relay Form CContact capacity: 30V (AC/DC) 0.5A or less


Installation Outdoor, Indoor

IP Rating 43

Weight 550g

www.takex.com16

C

M

Y

CM

MY

CY

CMY

K

FLAME SENSORTX-124R

• Battery operated• Instant flame detection• Rain-proof housing• Detection time setting


Detection Distance

33ft. (10 m) : (Gas Flame of Lighter in front of sensor: approx. : 2.75" (7cm))100ft. (30 m) : (Flame of N-heptane on fire plate 15cm × 15cm: approx. : 23.62" (60cm)) *The flame size is rough.

Supply Voltage (Red/Black wires)DC3V (CR-123A)

Current Consumption Standby: 55µA Max, Detection: 5mA Max

Detection Output(Blue/White wires)Solid State Switch N.C 3VDC · 0.01A MaxOutput when detecting Ultraviolet, Real time + delay time 2 sec

Ambient Temperature −4°F to +122°F (−20°C to +50°C)IP Rating 43Weight 510g


GLASS SENSORS

GS-1100E(Coverage: 7m × 8m)

• Wall-mount microphone• Wall mount type

Detection System Ultrasonic





Mounting Position Wall (indoor)

Optional Glass checker


Weight 120g

GS-02 (Straight cord)GS-02C (Curled cord)(Coverage: radius 180cm max)

• Piezoelectric type• Memory reset function

Detection System Piezoelectric type


Supply Voltage 10.5 to 15V (non-polarity)


Features Memory reset


Mounting Position Surface of glass (indoor)

Optional Glass checker, Glue


Weight 30g (GS-02) 50g (GS-02C)

www.takex.com 17

C

M

Y

CM

MY

CY

CMY

K

DA-101E(Silver)

• Near infrared beam type• Ultra-slim 30mm body• Excellent external light immunity• Selectable frequency

Detection System Near infrared beam direct reflection

Max Installation Height 3,000mm

Area Adjustable AngleMain body adjustable angle: 0˚ to +10˚Depth: 1lineWidth: adjustable by area switch

Power Supply 12 to 110V AC or DC ± 10%

Power Consumption1.8VA or less at 100V AC1.0VA or less at 12V AC 80mA or less at 12V DC1.3VA or less at 24V AC 40mA or less at 24V DC

External Output Dry contact relay N/O, 50V DC0.1A or less

Output Holding Time Approx. 0.5 seconds

Stationary Detection Time 2, 15, 60 and 180sec. selectable by dip switch



Weight 190g

DA-301E(Silver)

• Near infrared beam type• Super-slim 30mm body• High-density detection pattern with 4 lines

depth and each 8 areas per line• Stationary detection• Excellent external light immunity• Selectable frequency



Area Adjustable AngleMain body adjustable angle: 0˚ to +5˚Depth: 1line to 4 linesWidth: Adjustable by switch

Power Supply 12 to 24V AC or DC ± 10%

Power Consumption 1.3VA at AC24V, 1.0VA at AC12V40mA at DC24V, 80mA at DC12V

External Output Dry contact relay N/O, 50V DC0.1A or less

Output Holding Time Approx. 0.5 seconds

Stationary Detection Time 2, 15, 60sec. and selectable by dip switch



Weight 190g

DA-3001(Silver, Bronze, White, Black, Soutien collar, Mirror)



Area Variable Range

Start area: 0˚ to 10˚ (Set using the area adjustment lever)Presence area: 0˚ to 8˚ (Set using the area adjustment lever)Monitor area: 2 to 5 rows (Set using the DIP switch)Single/Both sliding: Set using the area mask

Power Supply 12 to 100 VAC or DC ±10% 50/60Hz

Power Consumption3.8 VA max. for 100V AC2.2 VA for 12V AC, 3.0 VA for 24V AC120mA for 12V DC, 70mA for 24V DC

External Output Dry contact relay output N.O. 50V DC: 0.1A (resistive load)

Output Holding Time Approx. 0.5 sec

Stillness Holding TimeStart area: 2 sec., 15 sec., 60 min., InfinityPresence area: 2 sec., 15 sec., 60 min., Infinity(Set using the DIP switch)


External Dimensions W230mm × H66.5mm × D33.5mm

Weight 250g

AUTO DOOR SENSORS (Photoelectric Beam)

www.takex.com18

C

M

Y

CM

MY

CY

CMY

K

DA-4700(Silver)

Front view 〔Max〕

Side view

Front view 〔Minimum〕3.0m9.9’

2.0m6.6’

1.0m3.3’

3.0m9.9’

4.0m13.1’

5.0m16.4’

2.0m6.6’

1.0m3.3’

1.0m3.3’

1.0m3.3’0

2.0m6.6’

2.0m6.6’

3.0m9.9’

3.0m9.9’

2.0m6.6’

1.0m3.3’

1.0m3.3’

2.0m6.6’

3.0m9.9’

3.0m9.9’

4.0m13.1’4.7m15.4’

1.0m3.3’

2.0m6.6’

3.0m9.9’

4.0m13.1’4.7m15.4’

1.0m3.3’

2.0m6.6’

3.0m9.9’

4.0m13.1’4.7m15.4’

Max Min

ShiftingShifting

Detection System Near infrared beam direct reflectionMax Installation Height 4,700mm

Area Variable Range

<Depth>*Fine adjustment angle of the sensor body : 0 to 15˚C

*The number of defection row selectable from 2/3/4<Width>*1 row sift for narrow side. (by Lens slide) *The number of defection row selectable from 6/4/2

(both light and left)Power Supply 12 to 24 V AC or DC ±10%

Power Consumption 2.5VA for 12V AC, 2.5VA for 24V AC140mA for 12V DC, 65mA for 24V DC

External Out put

Output 1 : Dry contact relay output N.O/N.C (Selectable)50V DC : 0.1A(resistive load)No.1,2,3,4,5 row detect or No.4,5 row detect selectable

Output 2 : Dry contact MOS relay output N.C50V DC : 0.1A(resistive load)Only No.1,2,3 row detect *Fail-Safe

Output Holding Time Approx 0.5 Sec

Stillness Holding Time 2,15,60/sec, Infinity at No.1,2,3 row2,15/sec at No.4,5 row

Ambient Temperature −4°F to +140°F (−20°C to +60°C)External Dimension W265mm × H61mm × D37.5mmWeight 290g

SHA-6501(Gold)



Area Adjustable Angle Max 15˚

Power Supply 12 to 24 VAC or DC ±10% 50/60Hz

Power Consumption 2.8 VA for 12V AC, 2.8 VA for 24V AC180mA for 12V DC, 90mA for 24V DC

External Output Dry contact relay output N.O.50V DC: 0.1A (resistive load)


External Dimensions W321mm × H101.8mm × D90.5mm

Weight 830g

AUTO DOOR SENSORS (Photoelectric Beam)

PS-520E(White, Silver)(Coverage: H4m × W2.4m)

Detection System Passive Infrared

Alarm Output

Dry contact relay output: 2cHold time: Adjustable approx. 0.25sec to 60sec30V (AC/DC) 1A


Power Consumption 40mA / DC 70mA / AC


Mounting Position Wall, Ceiling (indoor)


Weight 170g

AUTO DOOR SENSOR (Passive Infrared)

www.takex.com 19

C

M

Y

CM

MY

CY

CMY

K


Sensor speaker sends a message such like guidance or warning automatically when the built-in sensor detects people.Sensor speaker with contact output model is available, so this can be used as burglar alarm for security purpose.

PV-12(12V DC ∙ with alarm output)

• Horn speaker type• Recording time is 8sec max• You can record only by speaking to microphone


Coverage Area Wide angle protection(Coverage 12m max.)

Supply Voltage 12V DC

Voice Output 2W

Alarm OutputDry contact relay output: 1cReset time: approx. 8 sec30V (AC/DC) 0.5A


Weight 1,000g

PVW-12TE

• Two recordable messages with playback• You can select message for day and night• Contact input can trigger messages• Reliable PIR with dual zone system• microphone and jack are equipped for recording

message• Rain-proof housing


Coverage AreaHorizontal coverageMax. detection distance 12mDetection angle 90˚


Current Consumption 55mA Max. for standby300mA Max. for operation

Contact Output

Dry contact relay output NO/NC selectable with a switchContact capacity: 30V (AC/DC), 0.5A Max.Contact operation: One shot operation Approx. 2 sec.


Weight 480g

PBS-15T

• Detection distance: 15m• Frequency is selectable for L or H to avoid

cross talk• Response time is adjustable between 0.05 sec.

and 0.7 sec.• AGC circuit• Frost proof cover

Detection System Simultaneous breaking of 2 beams

Supply Voltage 10 to 18V DC (Non-polarity)

Current Consumption Transmitter: 24mAReceiver: 250mA

Alarm Output

Dry contact relay output N.C./N.O. selectable30V AC/DC 0.5A (resistive load)Contact action: Interruption time (Min.2 sec.)


Weight Transmitter: 560g Receiver: 620g

[ DESIGN PENDING : 2 ]

www.takex.com20

C

M

Y

CM

MY

CY

CMY

K

SENSOR SWITCH

MS-60EDirectional detection(Coverage: 0.5 to 6.0m)

• Direction Conscious Sensor• Rain-proof housing• Adjustable output timer (approx. 5sec to 5min)• Selectable day or night time operation


Alarm Output

Dry contact relay output: N.C/N.O selectableOutput time: detection time + Offdelay approx. 5sec to 5min30V (AC/DC) 0.5A

Supply Voltage 10.5 to 30V DC (non polarity)



Weight 220g

VOICE SPEAKER

AV-100E• To give an audio message after being triggered

by a PIR etc• Recording time is 8sec., Max.• You can record only by speaking into microphone

Supply Voltage 12V DC

Voice Output 2W Max

Alarm Input Dry contact N/O


Weight 1,000g

www.takex.com 21

C

M

Y

CM

MY

CY

CMY

K

ACCESSORIES (For Photoelectric Beam Sensors)

BH-200Long hood

for PH-200SE/600SE

BL-5BL-10BL-30L fittings

for PR-1B/5Bfor PR-10Bfor PH-50B

BL-11L fittings

for PR-11BE

BP-5BBP-5DFlush mount plate

for PR-1B, PR-5B

BP-5CFlush mount plate(For reflector type)

for PR-5B/PB-4RNS/4RTNS

BP-50COMPole cover

for COM-IN-50HF

BP-50MWPole cover

for MW-50 BP-60APole attachment

for PB-TK/PB-TE

BP-60TEPole cover

for PB-TK/PB-TE

BP-100COMPole cover

for COM-IN-100A

BP-200FPole cover

for PB-F, PB-IN-HF, PB-IN-100AT

BP-200XPole cover

for PXB/TXF-125E

BR-5

BR-10Reflector

for PR-5B/PB-4RNS/4RTNSfor PR-10B/10BU

BS-50FPole side cover


BS-50XPole side cover

for PXB

BU-50FFlush mount attachment


ER-02Wireless alignment checker

for PXB/PB series

HTF-24AEHeater

for PXB

HTF-24E(24V DC)HTF-100(100V AC)Heater


KH-120AHousing caseKH-120SHousing case(Stainless type)

for outdoor type sensor

SEC CircuitEnvironmental

for PH-200SE/600SE

www.takex.com22

ACCESSORIES (For Shutter Sensors)

BF-S3Sheet bracket

for BR-S3/M5

BR-M5Magnetic sheet

for SH-M5 BR-S3Reflection sheet

for PR-S3

BS-S3Sensor bracket(for over slide shutter use)

for PR-S3, SH-M5

BZ-S2Sensor bracket

for PR-S3, SH-M5

C

M

Y

CM

MY

CY

CMY

K

ACCESSORIES (For Outdoor Passive Infrared Sensors)

BCW-401Wall/ceiling attachment

for MS-100E BL-8400Wall mount attachment

for PA-8410/8420, PIR-30WE/50NE

BP-01Pole attachment

for PA-15WE/30NE


for PA-15WE/30NE, PIR-T15WE


for PA-8410/8420, PIR-30WE/50NE

BP-11Pole cover

for MS-100E


for MS-100E BP-22Pole attachment

for MS-12TE/12FE, PIR-T15

BP-22FPole attachment

for PIR-T15WE


for TX-114/OMS-12FE

BR-M5Magnetic sheet

for MS-100E BU-8400Embedding attachment

for PA-8410/8420

BV-03Vise attachment

for PA-15WE/30NE

BW-14Wall mount bracket

for MS-100E BW-24Wall mount bracket

for MS-12TE/12FE

KP-32Ceiling attachment

for PIR-T15WE

WO-3DWall bracket

for PIR-15WE/50NE

www.takex.com 23

ACCESSORIES (For Passive Infrared Sensors)

BCW-401Wall/ceiling attachment

for PA-450/460/470/480/6612/6800 series

BL-5000Wall mount attachment

for all ceiling mount series

BU-5300BU-6800BU-7000Flash mountattachment

for PA-5312/25/6800/7000

EL-02Security level checker

for PA-5312/25

C

M

Y

CM

MY

CY

CMY

K

BEAM TOWER ENCLOSURES

www.takex.com24

TAS-100/150/200/300180°SINGLE SIDED FLOOR MOUNT

TAD-100/150/200/300360°DOUBLE SIDED WALL MOUNT

TAW-100/150/200/300180°SINGLE SIDED WALL MOUNT

FEATURES● Choose from floor or wall mount models, in single and double sided variants● Available in 1m, 1.5m, 2m or 3m heights● Anodized aluminium column for high resistance to oxidation● Tamper protected lid prevents unauthorised access● Vandal resistant polycarbonate covers● Wide range of accessories available to suit the most demading of site requirements

Disguise the mounting height and number of beamsfrom observers with our wall and floor mounted towers

HIGH SECURITY

VANDAL RESISTANT

EASY ADJUSTMENT

CONSTRUCTION

BEAM COMPATIBILITY

ACCESSORIES

TAKEX Active Infrared Beams can be mounted on poles, walls, or any convenient structure. Where there is no mounting point, or for additional security, TAKEX Beam Towers are available as attractive but rugged wall or floor-mounted units, with single or double sided variants. Standard heights are 1m, 1.5m, 2m, and 3m.

The central support spine is made from box-section anodized extruded aluminium which is rigid and highly resistant to oxidation. The spine profile is common to all models, allowing easy conversion from single to double-sided towers for system expansion.

The tower covers are made from UV and vandal-resistant polycarbonate, completely opaque to disguise the mounting height and number of beams from observers, but transparent in the infra-red spectrum for maximum beam transmission.

Lateral tower side-supports (TAS/TAD models only) ensure solid mounting, with height adjustment available to avoid water-pooling.Beam units and accessories are mounted on slide bolts in vertical channels of the spine, allowing for fast trobuble-free adjustment.

TA Series Beam Towers will accept our standard Twin and Quad beam sets, but for preference use TAKEX KH Series Quad beams, designed specifically (and only) for use in TA Towers, and supplied with PTKH ‘Quick-fix’ mounting brackets for fast, trouble-free assembly.

A wide range of accessories including heaters (PTH) and thermostats (PTS), pressure-sensitive anti-climb switches (TAPS) and first-fix bolt sets (CRFB) are available to suit even the most demanding of site requirements.

C

M

Y

CM

MY

CY

CMY

K

A12 AV-100E

B8 ALS6-AB51 EA051-PB

CCOM-IN-100AL/AH 9COM-IN-50HFL/HFH 9

D18 E101-AD18 1003-AD18 E103-AD19 0074-AD7 DS-6ND

31 E2107-AP31 E0307-AP31 E0017-AP21 E0148-AP21 E0248-AP3 HK-TA001-BP7 XE001-BP1 F001-BP3 HK-FH001-BP2 TS001-BP4 )K(KT001-BP6 SN01-BP6 SNT01-BP7 XE002-BP1 F002-BP3 HK-FH002-BP4 ET02-BP4 US03-BP4 )K(KT03-BP7 XE004-BP4 ET04-BP6 SNR4-BP6 SNTR4-BP1 F05-BP3 HK-FH05-BP4 ET06-BP4 )K(KT06-BP2 TA001-NI-BP

PB-IN-100HF 1PB-IN-200HF 1PB-IN-50HF 1

8 WS57-NI-BP20 T51-SBP4 ES002-HP4 ES006-HP11 EW03-RIP11 EN05-RIP01 EW51T-RIP

11 PIR-T15AM5 B01-RP5 PR-10BU

S7 5M-HS

T01 RF411-XT01 RS411-XT01 RT411-XT71 R421-XT2 E521-FXT3 HK-E521-FXT

www.takex.com 25

21 20E86-AP

5 PR-11B5 B1-RP5 B5-RP7 3S-RP

19 E025-SP20 21-VP20 ET21-WVP2 CTA001-BXP

PXB-100ATC-KH 31 F001-BXP1 FH001-BXP

PXB-100HF-KH 38 WS001-BXP1 F002-BXP1 FH002-BXP

PXB-200HF-KH 31 F05-BXP1 FH05-BXP3 HK-FH05-BXP

F61 E0001-SF61 E0002-SF

FS-3500E(W)/(B) 1661 E0005-SF

G71 20-SG71 C20-SG71 E0011-SG

M11 E001-SM01 EF21-SM01 ET21-SM

21 E06-SMMW-100AL/AH 9

9 H/L05-WM

O01 EF21-SMO

P11 EW51-AP11 EN03-AP41 073-AP41 0E54-AP41 IP054-AP41E 064-AP51 L074-AP51 S084-AP51 E0184-AP51 E0284-AP31 E2135-AP31 E5235-AP31 IP2146-AP21 E2166-AP21 E5086-AP21 E0186-AP21 E2186-AP

19SHA-6501

C

M

Y

CM

MY

CY

CMY

K

Europe, Middle East & AfricaAviary Court, Wade RoadBasingstoke, Hampshire RG24 8PEUnited Kingdomtel: +44 (0) 1256 475555fax: +44 (0) 1256 466268www.takex.com

TAKEX EUROPE LTD.

Asia83-1, Gojo-sotokan-nishi, Higashino Yamashina-ku, Kyoto 607-8156Japantel: +81 75 501 6651fax: +81 75 593 3816www.takex-eng.co.jp

North America151 San Zeno WaySunnyvale, CA 94086USAtel: +1 408 747 0100fax: +1 408 734 1100www.takex.com

Australia4/15 Howleys RoadNotting Hill, VIC 3168Australiatel: +61 (3) 9544 2477fax: +61 (3) 9543 2342www.takex.com

TAKEX AMERICA INC. TAKENAKA ENGINEERING CO., LTD.

C

M

Y

CM

MY

CY

CMY

K

Documents

SECURITY SENSORS - TAKEXtakex.com/.../downloads/supp_info/TAKEX_security_sensors_TAus.pdf · SECURITY SENSORS TAKEX is a leading ... 30V (AC/DC) 0.5A Max Supply Voltage 10 to 30V