34
7-1 USA & CANADA: ONLINE: INTERNATIONAL: 800-332-2500 Phone www.ccc-parts.com +1-847-966-9700 Phone 800-227-1511 Fax [email protected] +1-847-966-9701 Fax 7 Section 7 Hardware & Supplies Page Part Trays .................................................................... 7-2 Tape .......................................................................... 7-2 Cleaning Products........................................................... 7-3 Chemicals & Lubricants .................................................... 7-4 Safety Apparel ............................................................... 7-6 Hand & Nail Brush........................................................... 7-6 Cleaning Brushes/Scrapers/Scrubbers .................................... 7-7 Orifice Cleaners, Sizers & Reamers ........................................ 7-10 Compression Fittings ....................................................... 7-11 Aluminum & S/S Tubing & Tubing Cutter .................................. 7-12 Palnuts ....................................................................... 7-12 Gauge Glass Cutter ......................................................... 7-12 Chain Breakers .............................................................. 7-12 Wheel Puller ................................................................. 7-12 Drill Bits ...................................................................... 7-13 Screw Extractor Set ......................................................... 7-13 Gas Pressure Regulators .................................................. 7-14 Gas Hose Kits & Hoses – Dormont ........................................ 7-15 Gas Hose Kits & Economy Gas Hoses – Jet Force ....................... 7-17 Gas Connector Accessories – Jet Force .................................. 7-18 Swirl Water Hoses & Quick Disconnects – Dormont ..................... 7-19 Hose Clamps................................................................. 7-20 Hose/Plastic Pipe Cutter .................................................... 7-20 Cable Ties .................................................................... 7-20 Hi-Temp Hose ................................................................ 7-20 Match Holder, Non-Inverted Mirror ......................................... 7-21 Bucket Openers ............................................................. 7-21 Pot Rack Hooks.............................................................. 7-21 Thermometers ............................................................... 7-22 Test Device, Manometer .................................................... 7-29 Timers – Digital & Mechanical .............................................. 7-30 Scales – Digital & Mechanical .............................................. 7-31 Fuse Holders & Fuses ...................................................... 7-32 Looking For .................................................................. 7-34 Section 7 HARDWARE & SUPPLIES

Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

Embed Size (px)

Citation preview

Page 1: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-1

USA & CANADA: ONLINE: INTERNATIONAL:800-332-2500 Phone www.ccc-parts.com +1-847-966-9700 Phone

800-227-1511 Fax [email protected] +1-847-966-9701 Fax

7

Section7

Hardware

&Supplies

PagePart Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2Cleaning Products. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3Chemicals & Lubricants . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4Safety Apparel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6Hand & Nail Brush. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-6Cleaning Brushes/Scrapers/Scrubbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-7Orifice Cleaners, Sizers & Reamers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10Compression Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11Aluminum & S/S Tubing & Tubing Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12Palnuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12Gauge Glass Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12Chain Breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12Wheel Puller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-12Drill Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13Screw Extractor Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13Gas Pressure Regulators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14Gas Hose Kits & Hoses – Dormont . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15Gas Hose Kits & Economy Gas Hoses – Jet Force . . . . . . . . . . . . . . . . . . . . . . . 7-17Gas Connector Accessories – Jet Force . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18Swirl Water Hoses & Quick Disconnects – Dormont . . . . . . . . . . . . . . . . . . . . . 7-19Hose Clamps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20Hose/Plastic Pipe Cutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20Hi-Temp Hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-20Match Holder, Non-Inverted Mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21Bucket Openers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21Pot Rack Hooks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21Thermometers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22Test Device, Manometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-29Timers – Digital & Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-30Scales – Digital & Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31Fuse Holders & Fuses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-32Looking For . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-34

Section

7HARDWARE &SUPPLIES

Page 2: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-2

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511PART TRAYS

2 x 41⁄2 x 111⁄2 Q-1373 x 41⁄2 x 111⁄2 Q-1384 x 41⁄2 x 111⁄2 Q-1396 x 41⁄2 x 111⁄2 Q-14010 x 41⁄2 x 111⁄2 Q-14116 x 41⁄2 x 111⁄2 Q-142

TAPE

OrderW" x H" x L" Color Number

4 x 4 x 12 Gray Q-1346 x 4 x 12 Gray Q-13510 x 4 x 12 Gray Q-136

OrderW" x H" x L" Number

Q-134, Q-135, Q-136

Molded Plastic 18 Compartment Case

Q-137 thru Q-142

Sturdy Corrugated Cartons

Duct Tape

Order Number

Q-100

Glass Cloth Electrical Tape

Super 33+ Electric Tape

• 1⁄2" x 66'.

• Class “B” Insulation(266°F).

• Provides heat-stableinsulation for furnace & oven controls, motor leads & switches.

• 3⁄4" x 66'.

• 7 mil.

• Conforms & Wraps in rangeof 0°-200°F.

• Moisture Tight.

• Resists Ultra-Violet, Abrasion,Alkalies, Acids & Corrosion.

• A Tape for All Jobs.

Thread Sealing Tape

Electric Tape

Order Number

Q-132

• 18 Compartments.• 81⁄2" x 41⁄2" x 13⁄8".• Clear Plastic.

Q-843

• 2" x 60 yards.

• Strong, Sticky & Waterproof.

• Poly Cotton Mesh Cloth.

• Heavy Adhesive Mass SealsLow Pressure Seams.

Order Number

Q-129

Order Number

Q-130

• 1⁄2" x 520".

• Absolute Seal on Pipe or Fittings.

• 100% Virgin Teflon®.

• 3⁄4" x 60'.

• Long Lasting, Weatherproof.

• Temperatures up to 176°F.

Order Number

Q-131

Page 3: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-3

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

CLEANING PRODUCTS

Green Label Sanitizer & Cleaner

Red Label Fryer & Filter Cleaner Urn Clean

Sold 4 Jars/CaseEach Jar = 4 lbs.

Sold 24 Packets/CaseEach Packet = 6 oz.

Sold 150 Packets/CaseEach Packet = 3/4 oz.

Sold 100 Packets/CaseEach Packet = 2 oz.

• Provides thorough sanitizing, cleaning & odor removal in only one procedure.

• No need for separate procedures to clean, delime & remove milkstone from your machine & parts; saves additional labor & materials.

• Simplify your operations, cut costs & provideQuality Assurance.

Cleans & sanitizes anything;recommended for the following:

Ice Cream MachinesFrozen Drink & Dessert Machines

Ice Tea Dispensers & BrewersSoda & Beer Lines

Ice MachinesFloors, Walls & Grout

• Non-caustic formula safely cleans the most difficult jobs in one easy operationsaving hours of maintenance.

• Strong alkali ingredients dissolve difficult oil and grease quickly.

• Black metal marks are easily removed from ceramic plates.

• Versatile & Economical – after cleaning fryers and baskets reuse the same potentSTERA-SHEEN RED LABEL cleaning solution to soak/clean the exhaust fan filters.

• Can even be used to wash tile floor; most effective on greasy & oily surfaces.

Cleans & Removes Oils, Fats, Carbon, Calcium, Rust & Burned-OnGrease. Recommended for the following:

Fryers Popcorn Kettles Vent Hood Filters

The excellent cleaning standards of STERA-SHEEN RED LABEL will meet or exceedany local health department specifications.

FDA approved formula is also EPA approved as a final rinse sanitizer!

A handy, wall mounted dispenser for Q-232 packets is also available (See Below).

• Controls & removes coffee oils & mineral deposits in all of your brewing equipment & containers.

• Makes it easy to ensure great tasting coffee while maintaining machineefficiency.

• Keep your serving containers looking like new – NO MORE GRIMY COFFEE POTS.

Designed to clean the following:

Urns Percolators Automatic DripAirpots Teapots Tea BrewersPitchers Permanent Filters CarafesThermos Mugs Espresso Machines

Will not harm any components of your machine & leaves no toxic residue!

Order Number

Q-231

Order Number

Q-233

Order Number

Q-232

Order Number

Q-205

Page 4: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-4

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511CHEMICALS & LUBRICANTS

Food Grade Lubricant Spray

• Ideal For Food Service Equipment.• Odorless, Tasteless & Non-toxic.• FDA & USDA Approved.• Flammable.

9 oz.Order

Number

Q-665

Silicone Lubricant

• Ideal For Food Service Equipment.• FDA Approved Spray is Non-flammable.

16 oz.FDA Approved

Order Number

Q-668

Carbon Cleaner

Stainless Steel Polish

• Cleans Grills, Stoves, Steam Cookers,Ovens, Skillets, Pots & Pans, Deep Fat Fryers and Aluminum Utensils.

• Removes Baked-on Grease & CarbonWithout Scraping, Scrubbing or Scouring.

QuartOrder

Number

Q-663

GallonOrder

Number

Q-664

Hot Oven/Fryer Cleaner• Cleans Hot or Warm Ovens, Grills, Fryers

Baking Pans, Stove Spiders & Rings.

• Safe For All Metals Except Aluminum.

• Removes Baked-on Grease Without Scrubbing.

GallonOrder

Number

Q-659

Hood Cleaner/Degreaser• Cleans Painted Metal Hoods, Tile Walls,

Gummy Shelves, Refrigerators, Etc.

• Removes Surface Grease That’s NotBaked On, Oily Dirt & Stove Splatterings.

GallonOrder

Number

Q-658

Food Grade Grease

• Ideal For Food Service Equipment.• Odorless, Tasteless & Non-toxic.• -15° to 210°F.

OrderDescription Number10 oz. Spray Q-660Quart Can Q-661Gallon Can Q-662

• Removes Greasy Films,Water Mark & Fingerprints.

• Repels Water.

4 oz.Order

Number

Q-666

Page 5: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-5

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

CHEMICALS & LUBRICANTS (Cont.)

Premium Gas Valve Grease Economy Gas Valve Grease

14" Telescoping Zoom Spouts For Those Hard To Reach Spots

Order Number

Q-144

Spout Oiler - 4 fl oz.

A high grade turbine oil lubricant.

Chain Lubricant

Order Number

W-163

Con Lube - 4 fl oz.

A high temp graphite lubricant.Fire resistant. Great for conveyorovens, toasters & bun warmers

Anti-Seize Lubricant

Order Number

Q-669

High Temp Anti-Seize Lubricant - 1 fl oz.Lubricates bolts, bushings, pipe fittings, gaskets, nuts, screws, etc.Prevents seizing caused by high temps, heavy loads, corrosion &vibration. Works in temperature range from -95°F to 1800°F.

Thread Sealant — Loctite 567

Order Number

Q-847.20 fl oz.

Order Number

K-137

High Temp - 21⁄2 oz. PlasticSqueeze Tube

Provides excellent lubrication at tempsranging from 32˚ to 175˚F. Will not run at high temps. Remains flexible at lowtemps to maintain seal.

Order Number

K-300

Higher Temp - 21⁄2 oz. PlasticSqueeze Tube

Provides lubrication at temps rangingfrom 70˚ to 250˚F

Page 6: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-6

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511SAFETY APPAREL & HAND/NAIL BRUSH

Aprons

Slicer Gloves

Order Number

Q-311

Heavy Duty Goggles

17"Gloves

Order Number

Q-304

• Sold Individually.• Fits Right or

Left Hand.• Cut-Resistant.• Washable.

31"Gloves

Order Number

Q-366

Hand & Nail Brush

• Black Sparlon Bristles.• 2" x 5".• Easy Grip Handle.

Order Number

Q-289

Hand & Nail Brush Kit

Kit Icludes:Brush, Hook, Security Line & Washing Instruction Decal.Order

Number

Q-288

Heavy-DutyYellow Rubber

Order Number

Q-367

High Temp Black Neoprene

17"Mittens

Order Number

Q-303

Neoprene-Coated Mittens & Gloves(Sold in Pairs, 350˚F Max Temp Resistance)

OrderDescription Number

SMALL GLOVE Q-306

MEDIUM GLOVE Q-307

LARGE GLOVE Q-308

18% Stainless Steel

13% Polyester

69% Vinyl

No serrated blades

No open flames orheated surfaces

No powered blades

Order Number

Q-309

Order Number

Q-310

Face Shield

Page 7: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-7

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

CLEANING BRUSHES

Deluxe Mug, Cup, Glass& Jar Brush

OrderNumberQ-325

4"

6 1/2"

2"

Deluxe Coffee Pot Brush

Coffee Pot Brush

OrderNumberQ-341

OrderNumberQ-290

Coffee Urn Gauge Brush

5/8" Dia.

13/4"

1 1/2"8 1/2"

4"

9"2"

20"

4"

Condiment Pump Brushes

Refrigerator Coil Brush

OrderNumberQ-377

High Temp Brush forCleaning Fryer Coils

Microwave OvenCleaning Brush

OrderNumberQ-379

OrderNumberQ-344

High Temp FryerBasket Cleaning Brush

OrderNumberQ-335

High Temp Fryer Drain Cleaning Brush

OrderNumberQ-378

2" Dia.

41 /2"

10"

13"

15 1/4"

8 1/4"

15 1/2"

3/ 4" Dia.

1 3/4" Dia.

4 1/8"

7"

6"

14"

4"5 1/2"

11 /2"

• White Sparlon Bristles• 28" Long• 13/8" Dia.• Fryer/Kettle Brush

OrderNumberQ-298

• Black Sparlon Bristles• 23" Long, L-Tipped End• 7/8" Dia.

OrderNumberQ-297

Fat Brush

OrderNumberSP-136

Thin Brush

OrderNumberSP-137

11" 11"3"3"

11 /8"

1/ 2" Wide

Order Number

Q-299

Lettuce Cutter Brush

• 21⁄2" Sparlon Bristles

• Solid Foam Block

• 21/2" x 6"

4"

3"

• TeflonBristles

• TeflonBristles

Harmless Air Pot Brush

OrderNumberQ-376

2"

11"

5"

OrderNumberQ-339

Cool Cleaning Fryer Brush

OrderNumberQ-846

Frypot Brush

• 22" Long• Wooden Handle

Page 8: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-8

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511CLEANING PRODUCTS

Grill Brick/Handle Grill Screen, Pad Holder & Polishing Pad

• Alternative to Grill Brick• Screen is 4" x 51/2"• Pad is 4" x 5" x 1/4"

Order Number

Q-294

Order Number

Q-381

31/2"x 4"x 8"

Pad Holder Q-292

Screen (20/Pkg) Q-293

Polishing Pad Q-291

Order Number

Grill Cleaner & Scraper

OrderDescription NumberGRILL CLEANER (Prince Castle #167) Q-312MESH SCREEN, GRILL CLEANER (12/Pkg, For Q-312) Q-313(Prince Castle #167-1)PAD, GRILL CLEANER (4/Pkg, For Q-312) Q-314(Prince Castle #167-2)GRILL SCRAPER (Prince Castle #161) Q-315SCRAPER BLADE (For Q-315) (Prince Castle #161-1HD) Q-316

Q-312(Includes one piece each

of Q-313 & Q-314)Q-313 Q-314Q-316

Brick Only

Handle Only

Q-315(Includes one piece of Q-316)

Conveyor Broiler Cleaning Kit

Consists of:(1) Q-300 S/S Brush(1) Q-301 Hard Brass Brush — Venturi(1) Q-302 Soft Brass Brush(1) Q-304 Pair, Neoprene Gloves(1) W-464 Shaft Cleaning Tool

Order Number

Q-266

Q-300

Q-301

Q-302

W-464

Q-304

Page 9: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-9

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

CLEANING PRODUCTS

Broiler Brush

• Stainless Steel Bristles.• Hardwood Handle.• 31" Long x 71⁄4" Wide.

Order Number

Q-295

Hard Brass Brush Broiler /Grate Scraper

Soft Brass Brush

• 26" Long.• Stainless Steel.• Ideal for scraping hard carbon build up.• “V” shape constructed for deep scraping.• Heavy Duty.

Order Number

Q-301

Order Number

Q-300

Order Number

Q-302

Order Number

Q-720

Stainless Steel Brush

Page 10: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-10

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511ORIFICE CLEANERS & SIZERS

Orifice Cleaners & SizersPositive Oversize Protection • Absolute Control of Orifice Size • Leaves a Burr Free, Smooth Passageway

• Clean• Scrape• Measure

Drill/Orifice number size printed on each tool shank - See listing below.

Why carry a drill kit? This tool provides lower cost & greater accuracy.

Rotate to unlock

Steel Cutting TipAluminum BodySlide to required size

& lock in place

Drill/Orifice OrderDescription Size Number

50_51

52__53

55_HR Series _56 Z-136

60__64

68__72

76__80

.010_

Drill/Orifice OrderDescription Size Number

.125__31

32__34

36_HC Series _38 Z-137

40__42

44__46

48__50

52_

Orifice Reamers

Orifice Drill Bits

Small Reamer

Order Number

Q-317

3⁄32" Dia.

Tapered point allows fineadjustment of a smaller orifice. Double Cutting edge.

Medium Reamer

Order Number

Q-318

1⁄8" Dia.

Tapered point allows fineadjustment of a largerorifice. Double Cutting edge.

Order Number

Q-838

Order Number

Q-839

OrderDescription Number

For #56 Orifice Q-838

For #72 Orifice Q-839

(Dime used to show scale.)

Page 11: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-11

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

COMPRESSION FITTINGS

Make your own Pilots with our custom fittings

Brass Compression Fittings

Breakaway Union ElbowNut Ferrule Ferrule Flare Plug Coupling Union Tee

Size (10/Pkg) (20/Pkg) (Qty Below) (Each) (Each) (Each) (Each)CCT Order Number Order Number Order Number Order Number Order Number Order Number Order Number

1⁄8" Q-251 Q-250 Q-210 (15/Pkg) — Q-200 Q-224 Q-2773⁄16" Q-253 Q-252 Q-220 (15/Pkg) — Q-201 Q-225 Q-2781⁄4" Q-255 Q-254 Q-221 (15/Pkg) Q-206 Q-202 Q-226 Q-2795⁄16" Q-257 Q-256 — Q-207 Q-456 Q-227 Q-4583⁄8" Q-259 Q-258 Q-222 (6/Pkg) Q-208 Q-203 Q-228 Q-2807⁄16" Q-263 Q-262 Q-223 (6/Pkg) — Q-457 — Q-2831⁄2" Q-261 Q-260 — Q-209 Q-204 Q-229 Q-2815⁄8" Q-268 Q-455 — — Q-836 Q-230 —

(Each)Size OrderNPT Number1/4" x 1/8" Q-270

3/8" x 1/8" Q-271

3/8" x 1/4" Q-272

1/2" x 1/4" Q-273

1/2" x 3/8" Q-274

3/4" x 1/2" Q-2753/4" x 3/8" Q-276

Reducer Bushing

(Each)Size Order

CCT NPT Number5/16" 1/4" K-176

Stainless SteelMale Connector

(Each)Size Order

Thread CCT Number3/8–27 3/8" V-124B3/8–27 5/16" V-125B

Female Connector

Male (NPT) Female (NPT) Male Reducing UnionConnector Connector Elbow Coupling (Each)

Size (Each) (Each) (Each) CCT by CCT*CCT NPT Order Number Order Number Order Number Order Number

1⁄8" 1⁄8" Q-236 Q-459 Q-815 —

3⁄16" 1⁄8" Q-237 Q-460 Q-816 —

3⁄16" 1⁄4" Q-238 Q-461 Q-817 —

1⁄4" 1⁄8" Q-239 Q-462 Q-818 Q-2111⁄4" 3⁄16" — — — Q-2121⁄4" 1⁄4" Q-240 Q-463 Q-819 —

1⁄4" 5⁄16" — — — Q-2151⁄4" 3⁄8" Q-241 — Q-820 Q-2135⁄16" 1⁄8" Q-464 Q-219 Q-821 —

5⁄16" 1⁄4" Q-242 Q-465 Q-822 —

5⁄16" 3⁄8" Q-243 — Q-823 Q-8243⁄8" 1⁄4" Q-244 Q-466 Q-825 Q-8263⁄8" 5⁄16" — — — Q-2143⁄8" 3⁄8" Q-245 Q-467 Q-199 —

3⁄8" 1⁄2" Q-468 — Q-827 Q-2163⁄8" 5⁄8" — — — Q-2177⁄16" 1⁄8" Q-484 — — —

7⁄16" 1⁄4" Q-375 — — —

7⁄16" 3⁄8" Q-248 — Q-374 —

1⁄2" 3⁄8" Q-246 — Q-828 —

1⁄2" 1⁄2" Q-247 — Q-198 —

1⁄2" 5⁄8" — — — —

* Reducing Union Coupling is CCT by CCT.

Page 12: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-12

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511

OrderOD Number1⁄8" T-3003⁄16" T-3011⁄4" T-3025⁄16" T-3033⁄8" T-3047⁄16" T-3051⁄2" T-3065⁄8" T-307

5⁄16 -24 Q-3853⁄8 -24 Q-386*7⁄16 -28 Q-3871⁄2 -20 Q-388

TUBING — ALUMINUM & S/S

TUBING CUTTER PALNUTS GAUGE GLASS CUTTER

WHEEL PULLERCHAIN BREAKERS

OrderSize Number

T-300 thru T-307

For use in tight corners whereother cutters won’t fit. Requires11⁄4" swing radius.

For 1⁄8" to 1⁄2" O.D. Tubing

Cut Gauge GlassFast, Easy & Safe

Order Number

Q-321

Q-385 to Q-388

* Used on most Robertshaw & Harper-Wyman Infinite Switches

For Sizes:25 (1⁄4" Pitch) thru60 (3⁄4" Pitch)

• Eliminates Need for a Hammer & a Punch.• Simple to Use.• Saves Time.• High Quality.

• For Direct DriveMotor Shafts &5/8" Belt Drive.

• Comes with 4 Hooks & 3 Set Screws.

Order Number

Q-305

Aluminum — Sold In 50 Foot Rolls, Nat or LP

Steel Tubing (Copper Clad) – Nat or LPSold in 3 foot piece

Order Number

Q-333

Order Number

Q-328

1⁄4" Order Number

T-299

3⁄16" Order Number

T-224

Page 13: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-13

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

STAINLESS STEEL DRILL BIT SETS

• 13 Bits

• 1⁄16" to 1⁄4" by 64ths

• 29 Bits

• 1⁄16" to 1⁄2" by 64ths

• Nitride Treated• For Stainless Steel,

Titanium and Other HardTo Drill Materials

• Metal Box • Jobbers Length

GENERAL PURPOSE DRILL BIT SETS

• 13 Bits

• 1⁄16" to 1⁄4" by 64ths

• 29 Bits

• 1⁄16" to 1⁄2" by 64ths

• Black Oxide Treated• Metal Box• Jobbers Length

DRILL BITS SCREW EXTRACTOR SET

Designed to be held in a tap wrenchfor the removal of broken screws,studs bolts or pipe fittings.

OrderSize Number

1/8" Q-390

5/32" Q-391

5/16" Q-395

• For General Purpose Drilling.

• 9" Flute, 12" Long Overall.

• Bright Finish.

ORIFICE DRILL BITS

Order Number

Q-838

Order Number

Q-839

OrderSize Number

For #56 Orifice Q-838

For #72 Orifice Q-839

Order Number

Q-329

Order Number

Q-346

Order Number

Q-345

Order Number

Q-347

Order Number

Q-348

Page 14: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-14

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511GAS PRESSURE REGULATORS NOTE: All dimensions in inches

MAXITROLSize Gas Water Order(NPT) Type Column Number1/2 Nat 4 - 8 W-2401/2 LP 6 - 10 W-2501/2 Nat 3 - 6 W-1991/2 LP 5.5 - 12 W-2003/4 Nat 3 - 6 W-2013/4 LP 5.5 - 12 W-2021 Nat 3 - 8 W-205

These Regulators have a cubic feet/hour rating of 250 & inlet pressures up to1/2 PSI. Other Models of Maxitrol regulators are available on special order.

Note: The RV43 series has beenreplaced by the RV48 series. Maxitrol’s new design is slightly larger.

W-240, W-250

RV47D

W-926

W-957

HARPER-WYMANSize Gas Water Order(NPT) Type Column* Number

Nat 6

LP 101/2 W-926

*Adjustable

W-199 thru W-202

RV48

W-205

RV53These regulators

include vent limiterW-957

MAXITROL

OrderMaxitrol # Number12A04 W-957

Vent Limiter For RV48, RV52, RV53 &RV61 Regulators

See Our Web Site to Place Your Orders and More!

At www.ccc-parts.com you can…

Search Our Entire Inventory

Log into your account and you can…

• Check Current Pricing and Availability• Place Orders Anytime—Day or Night• Download Current Pricing, Forms and More.• View Order History• Track Shipments• Check Order Status• View Account Information• Save Time with Quick Order

Online Access to CCC!

www.ccc-parts.com

Page 15: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-15

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

HEAVY DUTY GAS HOSES & CONNECTORS NOTE: All dimensions in inches

OrderSize Number1⁄2" Quick Disconnect Valve Combo T-2193⁄4" Quick Disconnect Valve Combo T-2201" Quick Disconnect Valve Combo T-221

• Rotation technology (patent pending) reduces stress at both hose ends

Stainless Steel Construction• For caster-mounted commercial

cooking equipment• Heavy-duty, flexible, corrugated

304 stainless steel tubing

Antimicrobial PVC Coating• Inhibits growth of bacteria, mold

and mildew on the gas connector (patent pending)

Stainless Steel Braid• Tight-weave braid prevents

corrugations from stretching as equipment is moved

72" hose available on special order

1⁄2" N/A T-156 T-157 T-1583⁄4" TA-195 T-159 T-160 T-1611" N/A T-162 T-163 T-16411⁄4" N/A T-165 T-166 T-167

Hose LengthID 24" 36" 48" 60"

Order Order Order OrderNumber Number Number Number

Patented Safety ValveThis safety device acts as a shut-off valve and quick disconnect. The gas connector cannot be disconnected until the gas flow is shut off. Likewise, the valve cannot be opened until the gas connector is re-attached.

One-handed Quick DisconnectThe one-handed operation of the Safety Quik makes connecting and disconnecting the equipment from the gas supply easier for servicing and cleaning.

Safety Thermal Shut-offThe shut-off stops the flow of gas when the internal temperature exceeds 350°F.

Fitting and Valves

The Dormont Blue HoseFor Caster-mounted Commercial Gas Equipment

Hoses come w/ MaleNPT StressGuard™360° Swivel Fittings. Order Quick Disconnectsseparately.

Dormont Hoses Only

Dormont Hose KitsEach kit contains the following:1 — Gas Hose1 — Restraining Device1 — Full Port Gas Ball Valve1 — Quick Disconnect2 — Gas Elbow

1⁄2" T-450 T-451 T-4523⁄4" T-453 T-454 T-4551" T-456 T-457 T-458

Hose LengthID 36" 48" 60"

Order Order OrderNumber Number Number

T-450 thru T-458

Page 16: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-16

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511HEAVY DUTY GAS HOSES & CONNECTORS NOTE: All dimensions in inches

Corrugated stainless steel designed for stationary gasequipment for commercial or domestic installations.Comes with Flare Nuts & Adapters.

Stainless steel corrugated tubing encased instainless steel braid for added strength and durability.

Uncoated Stainless Steel Gas Hoses

Fittings and Valves

Restraining Cables

Safety Thermal Shut-offMade of solid brass construction.The shut-off stops the flow of gaswhen the internal temperatureexceeds 350°.

360° Maximum MovementUnlike single-plane 90° fittings,SwivelMAX with patented 360°Multi-plane movement (in all sizes)provides maximum performanceand mobility in gas equipment.

Increased Flow capacityThe patented 360° SwivelMAXdesign offers improved gas flow tothe equipment.

One-handed OperationSnapFast is the only quick disconnect of its kind design-certified by CSA for commercialkitchen use. It makes connectingand disconnecting the equipmentfrom the gas supply easier for bothservicing and cleaning.

Size Order(NPT) Number

1⁄2 T-1683⁄4 T-1691 T-170

11⁄4 T-171

Size Order(NPT) Number

1⁄2 T-1723⁄4 T-217

1 T-173

Required for all moveable gas equipment.

Prevents yanking stresses on the gas connector which could cause gas to leak.

3 Ft T-213

5 Ft T-214

Hose Length Order Number

HOSE LENGTHID 24'' 36" 48'' 60'' 72"

Order Number

1⁄2'' T-185 T-186 T-187 T-188 T-189

3⁄4'' TA-185 TA-186 TA-187 TA-188 TA-189

HOSE LENGTHID 36'' 48'' 60''

Order Number

3⁄4'' T-230 T-231 —

1'' N/A T-233 T-234

Color: Blue

See Gas Elbows & CouplingsSection 7, pg. 18.

Page 17: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-17

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

JET FORCE GAS HOSES & CONNECTORS NOTE: All dimensions in inches

1/2" T-350 T-351 T-3523/4" T-353 T-354 T-355

1" T-356 T-357 T-358

Hoses Come w/ Union Only; Order Quick Disconnects Separately or Kit

36" 48" 60"

Braided Stainless Steel Gas Hoses — Plastic-CoatedRequired for all cooking equipment on casters. These hoses meet exact requirements of cooking

equipment that consume Higher BTUs and that are frequently moved for area clean-up.

Gas Hose KitsComplete Kit for Connecting Moveable Gas Equipment Includes:

Gas Connector • Quick Disconnect • Restraining Device • 90° Street Elbow

Corrugated Stainless Steel TubingStainless Steel Braid for Extra StrengthFlexible and Tough Plastic Coating

Economy Gas HosesColor: Yellow

The Jet Force Yellow Hose

Connector OrderSize Number1⁄2" x 60" Kit T-4041⁄2" x 48" Kit T-4021⁄2" x 36" Kit T-4033⁄4" x 60" Kit T-4053⁄4" x 48" Kit T-4003⁄4" x 36" Kit T-4011" x 60" Kit T-4081" x 48" Kit T-4071" x 36" Kit T-406

Order Order OrderID Number Number Number

Color: Yellow

DESIGN CERTIFIED • Stainless steel corrugated tubing encased in stainless steel braid.

• One-Piece Construction (no weld).• Tough, flexible and corrosion-resistant.• Thick, non-toxic plastic coating.• Limited Lifetime Warranty.

Page 18: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-18

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511JET FORCE GAS HOSES & CONNECTORS NOTE: All dimensions in inches

Gas Connector Accessories

Posi-Set Wheel Placement System

Color: Yellow

Quick DisconnectsSize Order(NPT) Number

1/2 T-1683/4 T-169

1 T-170

• Solid Brass construction.

• Precision machined components.

• One-hand operation for positive connection.

• Instant disconnecting.

• Fusible link shuts gas off in presence of fire.

Flexible Gas Hose designedto be used with these quickdisconnects — see above.

Restraining DeviceColor: Yellow

• Prevents yanking stresseswhich may damage connector,causing gas to leak.

• A safety precaution needed for all movable units.

Used with OrderHose Length Number

3 Ft T-363

5 Ft T-364

T-363, T-364

Gas OrderIn/Out (NPT) Number

1/2 V-1323/4 V-133

1 V-134

11/4 V-135

V-132 thru V-135

Gas Shut-Off Valves

T-410

• Installed below rear casters of mobile equipment.• Ensures equipment is replaced to the proper location after

removal for cleaning.

T-502T-501T-500

OrderSize Number1/2" x 1/2" Male/Female 90° Elbow, Black T-5003/4" x 3/4" Male/Female 90° Elbow, Black T-501

1" x 1" Male/Female 90° Elbow, Black T-5021/2" x 1/2" Female/Female Coupling, Black T-5033/4" x 3/4" Female/Female Coupling, Black T-504

1" x 1" Female/Female Coupling, Black T-505

Gas Elbows & Couplings

T-505

T-504T-503

T-168, T-169, T-170

Page 19: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-19

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

Swirl Water Hoses Quick Disconnects

Inner Hose OrderSizing Diameter Length Number

1⁄4" Female NPT x 1⁄4" Female Flare 1⁄4" 48" T-1811⁄4" Female NPT x 3⁄8" Female Flare 1⁄4" 48" T-1823⁄8" Female NPT x 3⁄8" Female Flare 3⁄8" 48" T-1781⁄4" Female NPT x 1⁄4" Female Flare 1⁄4" 72" T-1833⁄8" Female NPT x 3⁄8" Female Flare 3⁄8" 72" T-179

OrderSize Number1⁄4" T-1753⁄8" T-1761⁄2" T-177

Longer Lengths Available

• Suitable For Water/Steam• Brass

T-175, T-176, T-177

WATER HOSES & QUICK DISCONNECTS

WATER/STEAM HOSES

Nylon Braid Hose 1⁄8" 5⁄16" Q-790*†Nylon Braid Hose 1⁄4" 1⁄2" Q-753White Silicone Hose 1⁄4" 1⁄2" Q-755†White Silicone Hose 3⁄8" 5⁄8" Q-792*†Clear Silicone Hose 1⁄2" 5⁄8" Q-795†Nylon Braid Hose 1⁄2" 3⁄4" Q-752*White Silicone Hose 1⁄2" 3⁄4" Q-750†White Silicone Braid Hose 1⁄2" 15⁄ 16" Q-793†White Silicone Braid Hose 3⁄4" 11⁄ 8" Q-754†White Silicone Braid Hose 1" 17⁄ 16" Q-794†Black Polyurethane Hose 1" 17⁄16" Q-751*†

Inner Outer OrderDescription Diameter Diameter Number

Hoses are Sold per foot ($/Ft)

Q-752, Q-753, Q-790 Q-750, Q-755, Q-792 Q-795 Q-754, Q-793, Q-794 Q-751

* Water hose only† NSF Approved

See Hose CutterSection 7, pg. 20.

See Hose ClampsSection 7, pg. 20.

Page 20: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-20

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511

5 Ft with 1⁄2" & 3⁄8" Fittings T-308

5 Ft with 1⁄2" Fittings T-310

Hose sold per ft. Up to 50 ft T-309*

7⁄32" to 5⁄8" Dia Q-3553⁄8" to 7⁄8" Dia Q-3569⁄16" to 11⁄4" Dia Q-35711⁄16" to 11⁄2" Dia Q-3583⁄4" to 13⁄4" Dia Q-359

15⁄16" to 21⁄8" Dia Q-360

HOSE CLAMPS

CABLE TIES

OrderSizes Number

OrderLength Tying Sizes Number53⁄4" 1⁄16" to 11⁄4" Dia Q-350

111⁄8" 1⁄16" to 33⁄16" Dia Q-351

• 100/Pkg

* Price includes fittings. Please specify fittingsizes (1⁄2" or 3⁄8" or one of each) when ordering.

Q-350, Q-351

HI-TEMP HOSE

Q-355 thru Q-360

HOSE/PLASTIC PIPE CUTTER

Q-368 Q-369

OrderDescription Number

HOSE/PLASTIC PIPE CUTTER Q-368

REPLACEMENT BLADE — Teflon® Coated (For Q-368) Q-369

• Cuts: Hose, Polyethylene & Polybutylene pipe up to 11⁄2" ID; Class PVC pipe and other non-metallic materials up to 11⁄4" ID.

• Tough nylon handles.• Replaceable Teflon®-coated blade included.• Fast, safe, clean cuts.

T-308 (One end = 1⁄ 2" — One end = 3⁄ 8") T-309 (Sold Per Ft. Up to 50 Ft) T-310 (Both ends = 1

⁄ 2")

See Oil FiltersSection 8, pgs. 19 thru 22

Suitable for Hot Liquid Applications• Hot Grease — Fryer Filter Machines, etc.• Hot Water — Dishwashers, etc.• 325°F Max Working Temp — Up to 400°F

Intermittently.• 100 PSI Max Working Pres — Up to 1000

PSI in Bursts.• 1⁄2" ID.

OrderDescription Number

Page 21: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-21

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

MATCH HOLDER NON-INVERTED MIRROR

E-X-T-E-N-D-A-B-L-E to over 2 Ft.

• Permits safe, easy pilot lighting• Will extend to over two feet

BUCKET OPENERS STAINLESS STEEL POT RACK HOOKS

33⁄4"

3"

• Optical Quality Glass Prism(not plastic) Encapsulated in a Shock Resistant Plastic Housing

• Convenient Pocket Clip

• Multiple JointsAllow You To Get Into The Toughest Spots

• Chrome Plated Telescoping ArmExtends 16"

Non-Inverted Image Inspection Mirrora great new tool to make your job easier

Easy to See and Read!Avoid Costly Mistakes!

Order Number

Z-138

Order Number

Q-389

Order Number

Q-382

Single

Order Number

Q-383

Double

Order Number

Q-398

16" x 5" Long Aluminum

Order Number

Q-399

81/4" LongJunior Aluminum

8" Long PlasticOrder

Number

Q-397

Page 22: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-22

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511THERMOMETERS

SCAN — Quickly scan temperatures without risk of cross-contamination

PROBE — Verify internal temperatures with flip down probe thermometer (FoodPro Plus unit only)

TIMER — Set adjustable alarms for line check reminders (FoodPro Plus unit only)

HACCP CHECK — Indication lights instantly warn of potentially unsafe temperatures

HAND WASHABLE — Sealed to IP54 standards for long life expectancy and accuracy

SPOT ILLUMINATION — Target IR measurements highlighted by LED

EXTENDED LIFE — Two year warranty standard for normal use

Deep fryers Probe meatand poultry

Cold storage Preparing foods Steam tablesand salad bars

IP54 sealed foreasy cleanup

For more information visit www.fluke.com

Infrared Thermometers by FLUKE®

Order Number

Z-289

Order Number

Z-290

FoodPro FoodPro Plus

Page 23: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-23

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

THERMOMETERS

Accessories for Z-240 (Items Z-159, Z-165, Z-166, Z-167 are included w/Kit Z-240)

Probes w/HandleOrder

Description NumberLIQUID PROBE — 8" Tip Z-161SURFACE PROBE — 8" Tip Z-162SURFACE PROBE — Right Angle Z-163

TEMP CLAMP — 4 Ft Cord Z-159*HANDLE (For Interchangeable Tips) Z-165SURFACE PROBE — 8" Tip Z-166LIQUID PROBE — 8" Tip Z-167

Probes w/o Handle

Z-159

Z-161 Z-162

Z-166Z-167

Z-163

Z-165

* Does not require handle (Z-165).

Note: Probes Z-166 & Z-167 must be used w/Z-165 Handle.

Digital Temperature Tester Kit

• Temp range: -125° to 500°F.

• Rugged, water-resistant and accurate.

• Includes a backlight and hold position.

• Comes with protective case, battery (9 Volt)

and the following probes:

Oven Probe (Z-159),Surface Probe (Z-166),Liquid Immersion Probe (Z-167),Air Probe and Probe handle (Z-165).

Order Number

Z-240

Page 24: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-24

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511THERMOMETERS

• Temperature range: -115°F to 500°F measured in tenths of a degree.

• Accurate to within +– 0.9°F (+– 0.5°C) over entire range.

• “Light” button backlights display for easy reading.

• Specifically designed for foodservice.

• S/S probe is food contact safe.

• Heat-resistant handle & cable.

• Water & shock resistant.

• 5 year warranty on instrument, 1 year warranty on probe.

• Battery included (AA).

• Other probes available on special order.

Handheld Digital Thermometer w/Needle Probe

OrderNumber

Z-267

Order Number

Z-259

Accessories

Soft Carry Case

Page 25: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-25

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

Order Number

Z-258

THERMOMETERS

Handheld Digital Thermometer Kit

Probes

Accessories

Handheld Digital Thermometers

Order Number

Z-256

Order Number

Z-260

Order Number

Z-256

Order Number

Z-259

Order Number

Z-257

Order Number

Z-258

Order Number

Z-255

Order Number

Z-259

Entire Kit

Reduced TipNeedle Probe

Soft Carry Case

Flat SurfaceBell Probe

This kit includes the Z-256 Thermometer (which comes with the Z-257 needleprobe installed), the Z-258 surface probe, and the Z-259 soft carry case.

• Both are identical except the Z-256 comes with the Z-257 probe installed, and the Z-260 comes with the Z-258 probe installed

• Temp Range: -40°F to 500°F (-40°C to 260°C)

• Accurate to within +–0.9°F ( +– .05°C) over entire range

• Specifically designed for foodservice

• S/S probes are food contact safe

• Heat-resistant handle & cable

• Water & shock resistant

• 5 year warranty on instrument, 1 year warranty on probes

• Battery included (AA)

Page 26: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-26

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511THERMOMETERS

Handheld Fahrenheit Digital Thermometer

Order Number

Z-263

Order Number

Z-264

Order Number

Z-265

Order Number

Z-266

• All probes can be used up to 500°F (260°C), and have a 24" silicon iron jacketed, kevlar reinforced cable

100° to 1000°F

ProbesFor Z-261 & Z-262

Immersion Probe Bare Tip Probe Surface Probe Air Probe

Soft Carry Case

Order Number

Z-259

Thermometer Is:• Simple to operate & have a compact, lightweight design.

• Economical thermocouple type thermometers.

• Shock resistant.

• For use in: Food Service, Grocery & Retail Foods,

Agriculture & Horticulture, HVAC, Industrial Maintenance,

Transportation & Warehousing, Automotive Service & Repair.

• With battery included (9V).

Order Number

Z-261

Page 27: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-27

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

THERMOMETERS

• Temperature range: 100O to 200O F• For Checking Milk Temperatures in Latte,

Espresso and Hot Chocolate.

• 1" Dial Magnifying Cover

• Recalibration nut

• Stainless Steel Body

• Watertight Cover

• Includes Sturdy Clip and Carrying Case

• Temperature range: 50O to 550OF• 1" Dial Magnifying Cover• Recalibration Nut• Stainless Steel Body• Watertight Cover• Comes w/Carrying Case

Bi-Metal Pocket Thermometers

(1" dial magnifying cover) (13/4" dial magnifying cover)

• Temperature range: 0O to 220OF

• For Checking Steam Table Temperature, or MilkTemperatures in Latte, Espresso and Hot Chocolate

• 13/4" Dial Magnifying Cover• Recalibration Nut

• Stainless Steel Body

• Watertight Cover

• Includes Sturdy Clip and Carrying Case

• Temperature range: 0O to 220OF

• Recalibration Nut

• Stainless Steel Body

• Watertight Cover

• Comes w/Carrying Case

Order Number

Z-171

• Temperature range: -40O to 550OF

• High temperature range with water resistant boot

• Includes battery (AB13)

Handheld Digital Pocket Thermometers

• Temperature range: -58O to 300OF• Large LCD display (1/4" Digits) for

easy viewing

• Rugged construction — will withstand a 10 ft drop

• Instant update button, 0.1O resolution, 5" stem and an accuracy of ±2OF.

• Includes battery (AB13)

• Temperature range: -58O to 300OF• Large LCD display for easy viewing

• Rugged construction — will withstand a 10 ft drop

• Water Resistant

• Instant update button, 0.1O resolution, 3" stem and an accuracy of ±2OF

• Includes battery (AB13)

Order Number

Z-175

Order Number

Z-158

Order Number

Z-238

Order Number

Z-235

Order Number

Z-236

Order Number

Z-145

Order Number

Z-234

Page 28: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-28

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511THERMOMETERS

Surface ThermometerCandy/Fryer Thermometer

• Temp range: 0O to 1000OF• 13 Second Reading• 13⁄4" Dial• Bi-Metal Sensing Element• Wide Range

Order Number

Z-146

Order Number

Z-176

Candy/Fryer Thermometer

• Temperature range: 100O to 400OF• Stainless Steel Body w/Heat Proof Handle• Dual Scale• Comes w/Clip• 12" Long

Order Number

Z-177

• Temperature range: 200O to 550OF• Hangs or Stands• Bold Numbers• Stainless Steel

Order Number

Z-142

• Temperature range: 100O to 600OF• Stands or hangs• Folding Frame

Protects Thermometer• Stainless Steel

OrderNumber

Z-174

Oven Thermometer

• Temperature range: 140O to 190OF• Stainless Steel Body• Dual Scale• 4" Stem

OrderNumber

Z-252

Meat Thermometer

• Temp range: 50O to 550OF• Dishwasher Safe• Stainless Steel Body• Dual Scale• 12" Stem• Comes w/Clip

Candy/Fryer Thermometer

OrderNumber

Z-239

Digital Dishwasher Pocket Thermometer

• Temperature range: -14O to 392OF• Used to check dishwasher cycles• Has unique temperature range and

maximum hold feature• Water resistant and submersible• Battery Included (AB13)

Order Number

Z-172

• Temperature range: 100O to 400O F• Dishwasher Safe• Stainless Steel Body• Dual Scale• 4" Stem• Comes w/Clip

Oven Thermometer

Page 29: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-29

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

Refrigerator/Freezer Solar-Powered Digital Thermometer

Order Number

Z-209

• –50° to 158°F scale.

• 41⁄2" W x 11⁄8" H x 5⁄8" D.

• 3⁄8" x 13⁄8" LCD display.

• 56" probe lead.

• 10 second update.

• ABS plastic case.

• Surface mount.

• Acurate to within 2°F.

• Can use AAA battery for backup.

THERMOMETERS/MANOMETER

Refrigerator/Freezer Thermometer

-20° to 80°F

• Hangs or stands.• Bold numbers.• Stainless steel.

Order Number

Z-143

-40° to 120°F

• Vertical Mounting.• 4" Scale.• Celsius Scale.

Order Number

Z-151

Refrigerator/Freezer Thermometer

-40° to 80°F

• Hangs or stands.• Bold numbers.• 47⁄8" x 11⁄4".• Stainless steel.• Celsius scale.

Order Number

Z-144

Refrigerator/Freezer Thermometer

-40° to 60°F

• 2" Dial w/front flange.• Nickel-plated 4' capillary and bulb.

Order Number

Z-152

Refrigerator/Freezer Thermometer

Manometer

-40° to 65°F

• 2" dial hang mounting.• Nickel-plated 4' capillary and bulb.

Order Number

Z-153

Refrigerator/Freezer Thermometer

-40° to 65°F

• 2" Dial serviceman’s/superheat type.• Nickel-plated 1' capillary, bulb

and mount strap.

Order Number

Z-154

Test Device

Order Number

Q-319

• Scale allows readings up to 16" water column.

• Black lettering for easy reading.

• Tubing included.

Page 30: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-30

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511

• Easy to use — 60 minute timer has a longring bell alarm

• 31/2" Tall x 3" Wide x 21/2" Deep

THERMOMETERS/TIMERS

• Temp range: 14° to 392° F.• Monitors food cooking in the oven.• Alarm sounds when food reaches desired temperature.• Alarm can be set for temp or time.• Has adjustable stand and a magnetic back.• Lays flat at 3" long x 21/2" wide.• Includes heat-resistant 6" stainless steel probe (not waterproof)

with a 34" wire cable, and battery (AAA).

OrderNumber

Z-228

Digital Timer with Clock

• 24 hour count-down capacity.

• Also counts up in 1 second incrementsup to 24 hours.

• Clock, timer and count down functionscan operate simultaneously.

• “Memory” Timer allows you to storea preset time.

• Comes with magnet, pocket clip,stand and battery (AB13).

Pocket Timer — 4 Channel

Mechanical Timers

• With clock.

• 4 independently programmable channels which can operate simultaneously, each with a unique alarm.

• Comes with pocket clip, stand andbattery (AB13).

Mechanical Timer

Digital Fryer Thermometer/Timer• Temp range: 32° to 390° F.

• For measuring fryer oil & foodtemperatures.

• Also monitors center temperatures & cooking time for oven cooked foods.

• Lays flat at 5" long x 3" wide.

• Includes 61⁄2" stainless steelprobe with 45" wire cable,and battery (AAA).

Digital Timer — 4 Function

Digital Cooking Thermometer/Timer

Digital Timer

• Extra large digits.

• Loud buzzer.

• Has easel stand andmagnetic clip back.

• Count-down capacity is99 minutes, 59 seconds.

• Battery included (AAA).

OrderNumber

Z-224

• 24 Hour capacity; Four independent timing cycles w/distinct alarms.

• Large LCD display; Angled easy-touch sealed keypad.

• Count up/Count down modes in one second increments.

• Low battery indicator.

• Last entry recall.

• 85 decibel pulsating alarm.

• Non-skid rubber feet.

• Can mount on wall.

• Includes AC/DC adapter, or operates on 4 “C” batteries(not included).

• Alarm stays on until turned off.

• 7" Tall overall x 6" wide x 4" deep.

OrderNumber

Z-229

F-263 F-264 F-173

OrderDescription Number15 Min w/6 sec Ring F-263

30 Min w/6 sec Ring F-264

60 Min w/2 sec Ring F-173

• 21/8" Dial

OrderNumber

Z-225

OrderNumber

Z-227

OrderNumber

Z-226

OrderNumber

Z-230

Page 31: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-31

7

Section7

Hardware

&Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

SCALES — DIGITAL & MECHANICAL

• Capacity: 32 oz. x 1/4 oz.• Stainless Steel Platform• With % of Ice Cream

Overrun Markings• Pint Cup Included

OrderNumber

Z-246

Mechanical Ice Cream Scale —Compact

• Capacity: 250 lbs. x 1 lb.• Baked Enamel Finish• 131/2" Wide x 121/2" Deep x 31/2" Tall• With Memory Lock

OrderNumber

Z-249

Mechanical Scale

• Capacity: 32 oz. x 1/4 oz.• Rustless 6" x 4 3/4" Platform

Order Number

Z-241

Mechanical Rotating Dial Scale

See Our Web Site to Place Your Orders and More!

Search Our Entire Inventory atwww.ccc-parts.comLog into your account and you can…• Check Current Pricing and Availability• Place Orders Anytime—Day or Night• Download Current Pricing, Forms and More.• View Order History• Track Shipments• Check Order Status• View Account Information• Save Time with Quick Order• View Special/Clearance Items

Online Access to CCC!

www.ccc-parts.com

? ?Have a Question?

1-800-332-2500(USA & Canada)

Page 32: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-32

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511

1 300 13⁄32" x 15⁄16" Q-603

2 Q-559

3 Q-560

4 Q-561

5 Q-562

6 Q-563

8 Q-564

10 Q-565

15 Q-566

20 13⁄32" x 113⁄32" Q-567

25 13⁄32" x 15⁄8" Q-568

30 Q-569

35 13⁄32" x 21⁄4" Q-570

40 Q-571

45 Q-572

60 Q-590

15 32 1⁄4" x 11⁄4" Q-511

25 Q-513

1 250 Q-500

2 Q-501

3 Q-502

4 Q-503

5 Q-504

6 Q-505

7 Q-506

8 Q-507

9 Q-508

10 Q-509

25 125 1⁄4" x 11⁄4" Q-601

30 Q-602

2 250 Q-592

2.5 Q-593

3 Q-594

4 Q-595

5 Q-596

10 Q-597

12 Q-598

15 Q-599

20 Q-600

FUSE HOLDERS & FUSES

Fuse Holders

FusesABC

Order Number

W-378

For 1⁄4" x 11⁄4" Fusesup to 250V/20A

Order Number

Q-370

For 13⁄32" x 15⁄16" Fusesup to 300V/15A

Order Number

Q-371

For 13⁄32" x 11⁄2" Fusesup to 600V/30A

OrderAmps Volts Size Number

5 250 1⁄4" x 11⁄4" Q-573

10 Q-574

15 Q-575

20 Q-576

OrderAmps Volts Size Number

OrderAmps Volts Size Number

OrderAmps Volts Size Number

Buss Littelfuse

ABC 314

AGC 311

FNM FLM

FRN-R FLNR

JJN JLLN

JJS JLLS

KTK KLK

KTK-R KLKR

MDA 326

SC SLC

MDA

Bussman to LittelfuseCross-Reference

AGC

SC

See OEM Replacement UseSection 10.

Our Fuses fit in Blodgett, Hatco,Southbend, Vulcan-Hart, Wolf, etc.

Page 33: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-33

7

Section 7Hardw

are &Supplies

Order Online at: www.ccc-parts.com

International U.S. & Canada United Kingdom+1-847-966-9700 Phone 1-800-332-2500 Phone 0800-169-9856 Phone+1-847-966-9701 Fax 1-800-227-1511 Fax 0800-169-9854 Fax

KTK 1 600 13⁄32" x 11⁄2" Q-530

2 Q-531

4 Q-532

6 Q-533

8 Q-534

10 Q-500 Q-535

12 Q-536

15 Q-537

20 Q-538

25 Q-539

KTK-R 2 Q-545

8 Q-546

10 Q-547

15 Q-548

20 Q-549

FNM 25 32 13⁄32" x 11⁄2" Q-589

12 125 Q-586

15 Q-587

1 250 Q-577

1.5 Q-500 Q-578

2 Q-579

2.5 Q-580

3 Q-581

4 Q-582

5 Q-583

9 9 Q-610

10 Q-585

FRN-R 8 250 9⁄16" x 2" Q-550

10 Q-551

20 Q-553

25 Q-554

30 Q-555

40 13⁄16" x 3" Q-556

60 Q-558

FUSE HOLDERS & FUSES

Fuses (Cont.)

Buss Littelfuse

ABC 314

AGC 311

FNM FLM

FRN-R FLNR

JJN JLLN

JJS JLLS

KTK KLK

KTK-R KLKR

MDA 326

SC SLC

Bussman toLittelfuse

Cross-Reference

FNM & FRN-R

FNM FRN-ROrder

Type Amps Volts Size Number

KTK & KTK-R

KTK KTK-R

JJN 35 300 9⁄16" x 7⁄8" Q-520

40 Q-521

50 Q-523

60 Q-524

JJS 35 600 13⁄16" x 19⁄16" Q-525

40 Q-526

50 Q-528

60 Q-529

OrderType Amps Volts Size Number

JJN & JJS

OrderType Amps Volts Size Number

GMA

OrderAmps Volts Size Number

5 125 3⁄16" x 3⁄4" Q-606

200m 250 Q-607

500m Q-604

Page 34: Section HARDWARE & 7 SUPPLIES - AllPointsallpointsfps.com/download/Hot_Catalog/Sect.07_pgs.01-34.pdf7-3 7 Section 7 Hardware & Supplies Order Online at: International U.S. & Canada

7-34

7

Sect

ion

7Ha

rdw

are

&Su

pplie

s

The Leader In Food Equipment Parts

Call Us: (U.S. & Canada) Fax Us: (U.S. & Canada)

1-800-332-2500 1-800-227-1511

Plumbing ProductsSee Pages 5-2 thru 5-7

Gas Connectors & Gas AccessoriesSee Pages 7-15 thru 7-18

Parts & AccessoriesSee Pages 8-28 thru 8-36 & Section 9

LOOKING FOR…