Section 4: Medium Voltage Terminations - up to 42kV. Voltage Terminations - up to 42kV. Cold Applied: ... Elastomeric medium voltage terminations for ... shrinkable cable accessories

Return to Contents

Medium Voltage Terminations- up to 42kV.

Cold Applied:• TFTI-TFTO:

Single Core Polymeric Cable Termination - Pre Expanded on Holdout - up to 42kV

• TFTI-TFTO:Single Core Polymeric Cable Termination - Push On - up to 42kV

Heat Shrinkable: • IXSU/OXSU:

Uniterm - Terminations for Polymeric Cables - up to 42kV

Uniterm - Terminations for Polymeric Cables - up to 42kV - Selection Guide

• IXSU/OXSU - EPKT Quick Reference Guide

Heat Shrinkable Elbows: • EPKT:

Heat Shrinkable Termination System for cables up to 36kV

Heat Shrinkable Termination Selection Guide

• RSRB:Inline Bushing Boots

• RSRB:Right Angle Bushing Boots

Inline & Right Angle Bushing Boot Selection Guide

Push On Elbows:• RCAB:

Elastomeric Flexible Bushing Boot - up to 17.5kV ONLY

• RCAB:Inline Cold Applied Boot - up to 24kV ONLY

• RICS:Insulated Elbow Adaptors - up to 24kV

Insulated Elbow Adaptors - up to 24kV - Selection Guide

• RSES/RSSS:Insulated Screened Elbows - 250A - up to 24kV

• RSTI:Insulated Screened Elbows - 630A - up to 24kV

• RSTI:Insulated Screened Elbows - 630A - up to 36kV

• RSTI:Insulated Screened Elbow - Piggyback Coupling System - up to 36kV

GURO MV: NEWGUROFLEX Medium Voltage - Cold pour Insulating Compound

Section 4:

Energy Divisionhttp://energy.tycoelectronics.com

TFTI/TFTOElastomeric medium voltage terminations forindoor and outdoor applications for single corepolymeric cables up to 42 kV

R

FEATURES

– High performance termination material

– New stress control system

– Moisture sealing mastic

– Compact design

– Few components

– Simple to install, high reliability

– Crush resistant holdout

– Range taking

TFTI/TFTONEU 22.06.2000 10:23 Uhr Seite 5

The materials are the differenceKey to the performance of Raychem prod-ucts is the materials science and technologygoing into their development. Raychem hasa history of excellent performance in heat-shrinkable cable accessories up to 72 kV.The advantages of Raychem’s heat-shrink-able terminations have a proven record oflong-term stability, durability, and reliabilityover many years.

Raychem cable accessories have been usedby utilities and industrial companies aroundthe world for more than 30 years. This fieldexperience has enabled Raychem to be aleader in materials technology for high-voltage applications.

Raychem materials technology is at the coreof the development of our new range of TFT Elastomeric Terminations.

Benefits– Compact design– Few components– Simple and fast to install– Re-positioning after installation possible– Superior application ranges

Designed for both indoor and outdoor usein all climate conditions, the TFT rangecovers applications on single core plasticcables up to 42 kV.

The TFT has been developed to complementthe Raychem termination product line.TFT includes an elastomeric body materialin contrast to the semi-crystalline polymericbody of the heat-shrink terminations. Bothtypes of bodies consist of crosslinked poly-mer networks and both types of terminationsare easy to install over a range of cablesizes.

The TFT includes: – a non-tracking, silicone-based,

pre-expanded elastomeric body – a stress control patch – self amalgamating sealant tape

These components combine to provide thesame important functions as heat-shrinkproducts: electrical performance, stresscontrol, and moisture sealing. Because ofthe inherent physical property differencesbetween semi-crystalline and rubbery poly-mers, the TFT stress control and sealantmaterials are tailored to achieve optimumperformance with an elastomeric system.

The proprietary materials used in Raychemcable accessories are subjected to a longperiod of optimisation with respect toproduct design and function, manufacturingand expected service environments.

Raychem recognises that polymeric and elastomeric insulation materials are notgeneric and that extreme variations anddifferences can exist among base polymergrades and additives. Formulations consistnot only of polymer but of additives and fillers which greatly influence material pro-perties. It is the entire formulation packagein combination with compounding proced-ures, material processing, product designand assembly that all contribute to the overall product performance.

Insulation materialsThe materials employed in TFT have under-gone many years of development, yieldingan elastomeric product with exceptionalelectrical and weathering performance properties.

The insulation material has been developedto maximize the inherent material hydropho-bicity and thermal-stability characteristics ofsilicone and, through formulation expertise,to deliver excellent erosion resistance, weatherability and dielectric properties.

Stress control materialsA new patch for electrical stress control hasbeen developed with physical and electricalproperties providing superior performancewhen combined with the TFT termination.

Raychem has formulated a superior newstress control material which is included in the patch resulting in an outstandingimpulse withstand performance of the TFT termination.

Sealant tapes to prevent moisture ingressSealant is applied at the top and the bottomof the prepared cable. The tape is self amal-gamating and resistant to tracking and ero-sion. When the TFT body is installed, itscompressive force provides a tight seal preventing moisture ingress.

Product rangeThe product line is designed for single corepolymeric cables up to 400 mm2 for 36 kVcables. This coverage is completed with aminimum number of designs.

The products are fully tested to CENELECspecification HD 629 and to IEEE Std.48-1996.

For cable box applications TFT can be com-bined with the Raychem elastomeric bus-hing boot (RCAB) or insulated connectionsystem (RICS) to fit most types of switch-gear.

Sealant Tape

Termination Body

Stress Control Patch

Sealant Tape

24 kV outdoor termination

TFTI installed with Raychem elastomericbushing boot (RCAB)

TFTI installed with Raychem insulatedconnection system (RICS)

Leakage Current Collector


For pole top applications Raychem cansupply TFT together with polymeric supportinsulators (EPBI), Polygarde metal oxidesurge arresters and most fittings requiredfor installation.

Kit content Each standard TFT product consists of anouter elastomeric termination body on apre-lubricated, crush resistant core (hold-out), a stress control patch, sealant tapes,leakage current collector and installationinstructions. For special applications contact your localRaychem sales office.

The right kit for your cable range can be selected with the help of the selection tablebelow.

InstallationEach kit contains an easy to follow install-ation instruction with excellent visual dis-plays of the installation steps. Installation is both fast and simple.

TFTI/TFTO Termination Family

1 Indoor up to 17.5 kV

2 Outdoor up to 12 kV Indoor up to 24 kV

3 Outdoor up to 17.5 kV

4 Outdoor up to 24 kVIndoor up to 42 kV

5 Outdoor up to 42 kV

1 2 3 4 5

Features and benefits

Features Benefits

High-performance termination material Outstanding UV propertiesExceptional track and erosion resistanceHighly hydrophobic surfaceExcellent high voltage insulation material

New stress control system Excellent high-impulse withstand performance

Crush resistant core (hold out) Prevents collapsing due to rough handling

Compact design with integrated sheds Space saving

Range taking kit Fewer kits to accommodate a wider range ofcable sizes

Easy application Time saving and simple to install

Leakage current collector Defines a clear earth electrode to drain the leakage current

TFT-components


© R

aych

em E

PP-0

854-

4/00

www.tycoelectronics.com

All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct and reliable. Users, however, shouldindependently evaluate the suitability of each product for the desired application. Under no cirumstances does this constitute an assurance of any particular quality or performance. Such an assurance is only provided in the context of our product specifications or explicit contractual arrangements. Our liability for this product is set forth in our standard terms and conditions of sale. AMP, DULMISON, RAYCHEM, SIMEL are trademarks of Tyco International Ltd.

Tyco Electronics Raychem GmbHEnergy DivisionHaidgraben 685521 Ottobrunn/Munich GermanyPhone: ++49-89-6089-0 Fax: ++49-89-6096345

ArgentinaPhone: ++54-11-4733 2277Fax: ++54-11-4733 2267AustraliaPhone: ++61-2-4390 1111Fax: ++61-2-4353 2497BrazilPhone: ++55-11-861 1311Fax: ++55-11-861 1862

CanadaPhone: ++1-905-475 6222Fax: ++1-905-470-4453FrancePhone: ++33-3-80583200Fax: ++33-3-80341015MexicoPhone: ++52-5-729 0405Fax: ++52-5-361-8545

ThailandPhone: ++66-2-7394026 - 32Fax: ++66-2-3260563 - 64United States of AmericaPhone: ++1-800-327-6996Fax: ++1-800-527-8350

Cross sections in mm2

12 kV 17.5 kV 24 kV 36 kV 42 kV Diameter overIndoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor insulation in mm

1 25- 70 25- 50** ––– ––– ––– 13.5-21.02 70-185 50-150 25- 95 ––– ––– 17.0-28.03 150-400 120-300 95-300 35-150 35-120 23.0-37.04 400* 300-400* 240-400* 150-400* 95-240* 30.0-46.0*Larger on request**Only indoor

TFT x - x x x x

TFT Elastomeric Termination

Application I = IndoorO = Outdoor

Voltage 3 = 12 kV4 = 17.5 kV5 = 24 kV6 = 36 kV + 42 kV

Cores 1 = single core cable

Cross-sections see above table

Delivery 2

for example:

TFTI-5132Indoor termination for single core polymericcable 24 kV, 95-300 mm2


R TFTI/TFTO

Elastomeric medium voltage terminations forindoor and outdoor applications for single corepolymeric cables up to 42 kV

FEATURES

– High performance termination

material

– New stress control system

– Compact design

BENEFITS

– No shelf life

– Simple installation

– Superior application ranges

– Less waste for disposal

TFTI/TFTO3/00 29.08.2000 16:14 Uhr Seite 1

The materials are the differenceKey to the performance of Raychem’s prod-ucts is the materials science and technologygoing into their development. Raychem hasdisplayed excellent performance in heat-shrinkable cable accessories up to 72 kV.The advantages of Raychem’s heat-shrink-able terminations have a proven record oflong-term stability, durability, and reliabilityover many years.

Raychem cable accessories have been usedby utilities and industrial companies aroundthe world for more than 25 years. This fieldexperience has enabled Raychem to be aleader in materials technology for high-voltage applications.

Raychem’s materials technology is at thecore of the development of our new rangeof TFT Elastomeric Terminations.

Benefits– No shelf life– Less waste for disposal– Simple installation– Re-positioning after installation possible– Superior application ranges

Designed for both indoor and outdoor in all climate conditions, the TFT range coversapplications on single core plastic cables upto 42 kV.

The TFT has been developed to complementRaychem’s termination product line. The TFTincludes an elastomeric body material incontrast to the semi-crystalline polymericbody of the heat-shrink terminations. Bothtypes of bodies consist of crosslinked poly-mer networks and both types of terminationsare easy to install over a range of cablesizes. Because the TFT bodies are rubberyat ambient temperatures, they are not “frozen” in an expanded state such as heat-shrinkable polymer bodies and can be installed without heat.

The TFT includes: – a non-tracking, silicone-based

elastomeric body – a stress control patch – self amalgamating sealant tape

These components combine to provide thesame important functions as heat-shrinkproducts: electrical performance, stresscontrol, and moisture sealing. Because ofthe inherent physical property differencesbetween semi-crystalline and rubbery poly-mers, the TFT stress control and sealantmaterials are tailored to achieve optimumperformance with an elastomeric system.

The proprietary materials used in Raychemcable accessories are subjected to a longperiod of optimisation with respect toproduct design and function, manufacturingand expected service environments.

Raychem recognises that polymeric and elastomeric insulation materials are notgeneric and that extreme variations anddifferences can exist among base polymergrades and additives. Formulations consist not only of polymerbut of additives and fillers which greatlyinfluence the material’s properties. It is theentire formulation package in combinationwith compounding procedures, materialprocessing, product design and assemblythat all contribute to the overall productperformance.

Insulation materialsThe materials employed in TFT have simi-larly undergone many years of developmentyielding an elastomeric product with excep-tional electrical and weathering performanceproperties.

The insulation material has been developedto maximize the inherent material hydro-phobicity and thermal-stability characteris-tics of silicone and, through formulationexpertise, to deliver excellent erosion resis-tance, weatherability and dielectric proper-ties.

Stress control materialsA new patch for electrical stress control hasbeen developed with physical and electricalproperties providing superior performancewhen combined with the TFT termination.

Raychem has formulated a superior newmaterial which is included in the patchresulting in an outstanding impulse with-stand performance of the TFT termination.

Sealant tapes to prevent moisture ingressSealant is applied at the top and the bottomof the prepared cable. The tape is self amal-gamating and track and erosion resistant.When the TFT body is installed, its com-pressive force provides a water tight sealpreventing moisture ingress.

Product rangeThe product line is designed for single coreplastic cables up to 400 mm2 for 24 kVcables and up to 300 mm2 on 42 kV cables.This coverage is completed with a minimumnumber of designs.

Sealant Tape

Termination Body

Stress Control Patch

Sealant Tape

24 kV outdoor termination

TFTI installed with Raychem bushing boot(RCAB)

TFTI installed with Raychem insulatedconnection system (RICS)

Leakage Current Collector


The products are tested to the CENELECspecification HD629 and IEEE Std. 48-1996which encompasses international standardssuch as IEC, British Standards and VDE.

For cable box applications TFT can be com-bined with either Raychem’s bushing boot(RCAB) or Raychem’s insulated connectionsystem (RICS) to fit most types of switch-gear currently available in today’s marketplace.

For pole top applications Raychem cansupply TFT along with polymeric insulators(EPBI), Polygarde surge arresters and mostfittings required for installation.

Under regular circumstances, all of the TFTcomponents have full traceability back tothe origin of manufacture and raw materials.

Kit content Each TFT product will generally consist ofthe termination body, a stress control patch,sealant tapes, silicone grease, a smallassembly tool, leakage current collector and installation instructions. For special applications contact your localRaychem sales office.

The right kit for your cable range can be selected with the help of the selection table.

InstallationEach kit contains an easy to follow install-ation instruction with excellent visual dis-plays of the installation steps. Installation is both fast and simple.

TFTI/TFTO Termination Family

1 Indoor up to 17.5 kV

2 Outdoor up to 12 kV Indoor up to 24 kV

3 Outdoor up to 17.5 kV

4 Outdoor up to 24 kVIndoor up to 42 kV

5 Outdoor up to 42 kV

1 2 3 4 5


Features Benefits

High-performance termination material Outstanding UV propertiesExceptional track and erosion resistanceHighly hydrophobicExcellent high voltage insulation material

New stress control system Excellent high-impulse withstandperformance

Separate stress control patch Ensures stress control system is correctly positioned

Separate mastic tapes for moisture sealing, Ensures mastic tapes are correctlyspecially designed for cold-applied appli- positionedcations Excellent resistance to moisture ingress

Compact design with integrated sheds Space saving

Application range Three products cover the total cable range

Easy application Time saving and simple to install

Leakage current collector Defines a clear earth electrode to drain the leakage current


TFTI/TFTO Selection Table

Cross sections in mm2

12 kV 17.5 kV 24 kV 36 kV 42 kV Diameter overIndoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor Indoor/Outdoor insulation in mm

1 25- 70 ––– ––– ––– ––– 12.5-20.02 50-185 25- 95 25- 95 ––– ––– 16.0-27.03 150-400* 95-300 70-240 35-120 35- 95 21.5-36.04 ––– 240-400* 240-400* 95-300* 95-185 27.0-45.05 ––– ––– ––– 240-300* 240-300* 37.0-56.0* Larger on request

Voltage in kV [Um]3 124 17.55 246 36 + 42

ApplicationI IndoorO OutdoorCores1 Single core polymeric cable

TFT x - x x x x

TFT Elastomeric Termination

Application I = IndoorO = Outdoor

Voltage 3 = 12 kV4 = 17.5 kV5 = 24 kV6 = 36 kV + 42 kV

Cores 1 = single core cable

Ranges see above table

Spare position always = 1

for example:

TFTI-5131Indoor termination for single core polymericcable 24 kV, 70-240 mm2

© R

aych

em E

PP 0

671

3/00


All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct and reliable. Users, however, should independently evaluate thesuitability of each product for the desired application. Under no cirumstances does this constitute an assurance of any particular quality or performance. Such an assurance is only provided in the context of our product specifications or expli-cit contractual arrangements. Our liability for this product is set forth in our standard terms and conditions of sale. AMP, ELCON, ELO TOUCHSYSTEMS, HTS, M/ACOM, MADISON, NETCONNECT, RAYCHEM, SIMEL are trademarks of Tyco International Ltd.

Tyco Electronics Raychem GmbHEnergy DivisionHaidgraben 685521 Ottobrunn/Munich GermanyTel. (089) 6089-0 Fax (089) 609 63 45

Tyco Electronics CorporationEnergy Divisionc/o AMP Singapore Pte LtdNo. 26 Ang Mo Kio Industrial Park 2Singapore 569507Tel. 65-4836012Fax 65-4836031

Tyco Electronics CorporationEnergy Division8000 Purfoy RoadFuquay-Varina, NC 27526-9349, USATel. (800) 327-6996Fax (800) 527-8350

Members of the Tyco Electronics Corporation:

• Wedge technology products • Electrical connectors • Cable accessories • Asset protection • Surge arresters • Insulators • Fittings • Associated toolings


Features

• No sheds for indoor applications up to 42 kV

• High-performance terminationmaterial

• New ceramic stress control system

• Compact design

• Few components

• Simple to install, high reliability

• Mechanical robustness

• Range taking

• No shelf life limitation

IXSU-F/OXSU-FHeat-shrinkable medium voltage terminations for indoor and outdoorapplications for polymeric cables up to 42 kV

R

The material makes the differenceKey to the performance of Tyco Ener-gy Division products is the materialsscience and technology going intotheir development. Tyco supply heat-shrinkable cable accessories up to 72 kV with a history of excellent performance. Tyco’s Raychem heat-shrinkable terminations have a recordof proven stability, durability andreliability over many years.Tyco’s Raychem cable accessorieshave been used by utilities and industrial companies around theworld for more than 30 years. Thisongoing field experience has madeTyco’s Energy Division a leader inmaterials technology for high-voltageapplications. The Energy Division’smaterials technology is at the core ofthe development of our new range ofheat-shrinkable terminations.

Benefits– Space saving– Unlimited shelf life– Minimal waste for disposal– Simple and fast to install– Superior application range

Designed for both indoor and out-door use in all climate conditions, the IXSU-F/OXSU-F range coversapplications for polymeric cables upto 42 kV. The components combine to provide the important functionsrequired for all medium voltage products: electrical performance,stress control and moisture sealing.The proprietary materials used inTyco's Raychem cable accessorieshave been extensively optimised with respect to product design andfunction, manufacturing and expected service environments.

Variations and differences can existamong base polymer grades andadditives. Formulations consist notonly of polymer but of additives andfillers which greatly influence thematerial’s properties. The formulation,the compounding procedures, material processing, product designand assembly all contribute to theoverall product performance.

Insulation materialsThe materials used in the IXSU-F/OXSU-F termination generation haveundergone many years of develop-ment, yielding a polymeric materialwith exceptional electrical and weathering properties. The formu-lation is based on proven polymer compounds, exhibiting excellent stability and long-term performance

over several decades under severeenvironmental conditions. It deliversoutstanding tracking and erosionresistance, mechanical strength, weatherability and dielectric properties.

Stress control materialsTyco’s Energy Division has formu-lated a new electrical stress controlmaterial, which is based on longexperience with Raychem ceramicsemiconductor technology (ZnO). The ZnO stress control system is integrated in a heat-shrinkable insulating tubing. It fills any irregul-arities, bonds to the insulation andachieves excellent electrical perform-ance.

IXSU-F terminations installed withRaychem elastomeric bushing boot(RCAB)

IXSU-F terminations installed withRaychem insulated connectionsystem (RICS)

IXSU-F indoor termination

Insulating tubing

Stress control and sealant layer

Sealant tape

Stress controlling void filler

•

•

•

•

3

Product rangeThe product line is designed for poly-mer cables from 10 to 800 mm2 andup to 42 kV. This coverage is achievedwith a minimum number of designvariants.

The products are fully tested inaccordance with CENELEC specifi-cation HD629 which encompassesinternational standards such as IEC,British Standards and VDE.

For cable box applications, IXSU-Fcan be combined with either Raychem’s elastomeric bushing boot (RCAB) or Raychem’s insulatedconnection system (RICS) to fit mosttypes of switchgear bushing currently available.

For pole top applications, we cansupply OXSU-F along with polymericsupport insulators (EPBI), Polygardemetal oxide surge arresters (HDA),and most fittings required for installation.

All IXSU-F/OXSU-F components havefull traceability of raw materials andmanufacture according to ISO 9001and ISO 14001.

Kit content Each IXSU-F/OXSU-F kit consists ofthe insulation tubing including coex-truded stress control, sealant tapesand installation instructions. For 3-core cables, the kit also includesa conductive breakout and tubing forcustom core length. For special applications contact yourlocal sales representative.

Use the EPP 0795 selection guide toselect the right kit for your cable range.

InstallationEach kit contains easy-to-followinstallation instructions with excellentvisuals of the installation steps.Installation is both fast and simple.

1 Installation of 24 kV termination

2 The slim compact IXSU-F system in a 24 kV switchgear termination

3 IXSU-F terminations connecting 24 kV plastic cables to a substationtransformer

4 Overhead live connections for 24 kVusing OXSU-F terminations andpolymeric support insulatores (EPBI)

1

2

4


Features Benefits

High-performance termination Outstanding UV propertiesmaterial Exceptional track and erosion

resistanceHighly hydrophobicExcellent high-voltage insulation material

New ZnO stress control system Superb high-impulse withstandperformance

Integrated stress control over entire Ensures stress control system is termination length correctly positioned

Separate mastic tapes for moisture Ensures mastic tapes are correctlysealing, specially designed for positionedheat-shrinkable applications Excellent resistance to moisture

ingress

Compact design Space saving and universal application

Range taking kit Fewer kits for a wide range of cablesizes

Easy application Time saving, simple to install and high reliability

http://energy.tycoelectronics.com

Tyco Electronics Raychem GmbHEnergy DivisionHaidgraben 6, 85521 Ottobrunn/Munich, GermanyPhone: ++49-89-6089-0, Fax: ++49-89-6096345



ThailandPhone: ++66-2-7394026 - 32Fax: ++66-2-3260563 - 64United States of AmericaPhone: ++1-800-327-6996Fax: ++1-800-527-8350United KingdomPhone: ++44-1772-325400Fax: ++44-1772-726276

All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct andreliable. Users, however, should independently evaluate the suitability of each product for the desired application. Under no circumstances does this constitute an assurance ofany particular quality or performance. Such an assurance is only provided in the context of our product specifications or explicit contractual arrangements. Our liability for theseproducts is set forth in our standard terms and conditions of sale. ALR, AMP, AXICOM, B&H, Bowthorpe EMP, Critchley, Crompton, Dorman Smith, Dulmison, Guro, Hellstern, La Prairie, Morlynn, Raychem, and SIMEL are trademarks.

© T

yco

Ele

ctro

nic

s E

PP

078

2 4/

02

Selection guide

IXSU-F/OXSU-F Termination family up to 42 kV

Features

– No sheds for indoor terminations up to 42 kV

– High-performance termination material

– New ceramic stress control system

– Compact design

– Few components

– Simple to install, high reliability

– Mechanical robustness

– Range taking

– No shelf life limitation

R

Kit Number Cross SectionIXSU-F 3111 10 - 35 mm2

IXSU-F 3121 25 - 95 mm2

IXSU-F 3131 95 - 240 mm2

IXSU-F 3141 240 - 500 mm2

IXSU-F 3151 500 - 800 mm2

Kit Number Cross SectionOXSU-F 3111 10 - 35 mm2

OXSU-F 3121 25 - 95 mm2

OXSU-F 3131 95 - 240 mm2

OXSU-F 3141 240 - 500 mm2

OXSU-F 3151 500 - 800 mm2

IXSU-F/OXSU-F Single Core – Termination family

Indoor Outdoor

IXSU-F/OXSU-F Screened 3-Core without Armour – Termination family

Kit Number Tail Length Cross SectionIXSU-F 3301 450 mmIXSU-F 3304 1200 mm

10 - 16 mm2

IXSU-F 3311 450 mmIXSU-F 3314 1200 mm

16 - 35 mm2

IXSU-F 3321 450 mmIXSU-F 3324 1200 mm

25 - 70 mm2

IXSU-F 3331 450 mmIXSU-F 3334 1200 mm

95 - 240 mm2

IXSU-F 3341 450 mmIXSU-F 3344 1200 mm

240 - 500 mm2

Indoor Outdoor

Kit Number Tail Length Cross SectionOXSU-F 3301 450 mmOXSU-F 3304 1200 mm

10 - 16 mm2

OXSU-F 3311 450 mmOXSU-F 3314 1200 mm

16 - 35 mm2

OXSU-F 3321 450 mmOXSU-F 3324 1200 mm

25 - 70 mm2

OXSU-F 3331 450 mmOXSU-F 3334 1200 mm

95 - 240 mm2

OXSU-F 3341 450 mmOXSU-F 3344 1200 mm

240 - 500 mm2

12 kV


IXSU-F 4121 35 - 95 mm2

IXSU-F 4131 95 - 240 mm2

IXSU-F 4141 240 - 400 mm2

IXSU-F 4151 400 - 800 mm2


OXSU-F 4121 35 - 95 mm2

OXSU-F 4131 95 - 240 mm2

OXSU-F 4141 240 - 400 mm2

OXSU-F 4151 400 - 800 mm2

Outdoor


25 - 50 mm2

IXSU-F 4331 450 mmIXSU-F 4334 1200 mm

70 - 185 mm2

IXSU-F 4341 450 mmIXSU-F 4344 1200 mm

185 - 400 mm2

OutdoorIndoor


25 - 50 mm2

OXSU-F 4331 450 mmOXSU-F 4334 1200 mm

70 - 185 mm2

OXSU-F 4341 450 mmOXSU-F 4344 1200 mm

185 - 400 mm2

17.5 kVIXSU-F/OXSU-F Single Core – Termination family


Indoor


Indoor Outdoor



10 - 25 mm2

IXSU-F 5321 450 mmIXSU-F 5324 1200 mm

25 - 50 mm2

IXSU-F 5331 450 mmIXSU-F 5334 1200 mm

70 - 185 mm2

IXSU-F 5341 450 mmIXSU-F 5344 1200 mm

185 - 400 mm2

Indoor Outdoor


10 - 25 mm2

OXSU-F 5321 450 mmOXSU-F 5324 1200 mm

25 - 50 mm2

OXSU-F 5331 450 mmOXSU-F 5334 1200 mm

70 - 185 mm2

OXSU-F 5341 450 mmOXSU-F 5344 1200 mm

185 - 400 mm2

24 kV


IXSU-F 5131 70 - 240 mm2

IXSU-F 5141 185 - 400 mm2

IXSU-F 5151 400 - 800 mm2


OXSU-F 5131 70 - 240 mm2

OXSU-F 5141 185 - 400 mm2

OXSU-F 5151 400 - 800 mm2


IXSU-F 6141 120 - 400 mm2

IXSU-F 6151 400 - 800 mm2


OXSU-F 6141 120 - 400 mm2

OXSU-F 6151 400 - 800 mm2

Outdoor

OutdoorIndoor

36 kVIXSU-F/OXSU-F Single Core – Termination family


Indoor


50 - 120 mm2

IXSU-F 6342 650 mmIXSU-F 6344 1200 mm

120 - 300 mm2

IXSU-F 6352 650 mmIXSU-F 6354 1200 mm

400 - 500 mm2


50 - 120 mm2

OXSU-F 6342 650 mmOXSU-F 6344 1200 mm

120 - 300 mm2

OXSU-F 6352 650 mmOXSU-F 6354 1200 mm

400 - 500 mm2

Indoor Outdoor


Indoor Outdoor

42 kV

Kit Number Tail Length Cross SectionIXSU-F 7334 1200 mm 50 - 120 mm2

IXSU-F 7344 1200 mm 120 - 300 mm2

Kit Number Tail Length Cross SectionOXSU-F 7334 1200 mm 50 - 120 mm2

OXSU-F 7344 1200 mm 120 - 300 mm2



IXSU-F 7141 120 - 300 mm2

IXSU-F 7151 300 - 500 mm2


OXSU-F 7141 120 - 300 mm2

OXSU-F 7151 300 - 500 mm2

Solderless earthing connection EAKT-16xx for single and 3-corepolymeric cables up to 42 kV (set of 3)

Diameter over metal Application Range mm2 Raychem Part Mod. Code tape shield 12 kV 17.5 kV 24 kV 36 kV/42 kV Number Number12 – 18 mm 16 - 50 16 - 25 –– –– EAKT-1655 G5519 – 24 mm 70 - 150 35 - 95 25 - 70 25 - 35 EAKT-1656 G5625 – 30 mm 185 - 240 120 - 185 95 - 150 50 - 70 EAKT-1657 G5731 – 44 mm 300 - 630 240 - 500 185 - 500 95 - 300 EAKT-1658 G5841 – 65 mm 800 - 1000 630 - 1000 630 - 1000 400 - 1000 EAKT-1659 G59

The accessory kit can be ordered individually by using the Raychem Part Number EAKT-16xx, or in con-junction with the termination kit by adding the Mod. Code Number Gxx to the appropriate TerminationKit Number.

Example:IXSU-F5331-G58 Termination for 3-core polymeric cables 24 kV with solderless earthing connection.

Armour earthing assemblies (clamping ring) EAKT-16xx for singlecore polymeric cables up to 42 kV (set of 3)

Armour earthing assemblies (clamping ring) EAKT-16xx for 3-corepolymeric cables up to 42 kV

The accessory kit can be ordered individually by using the Raychem Part Number EAKT-16xx, or in con-junction with the termination kit by adding the Mod. Code Number Gxx to the appropriate TerminationKit Number.

Example:IXSU-F5331-G43 Termination for 3-core polymeric cables 24 kV with armour earthing assembly.

Diameter over Application Range mm2 Raychem Part Mod. Code armour 12 kV 17.5 kV 24 kV 36 kV/42 kV Number Number21 – 32 mm 16 - 70 16 - 50 16 - 50 –– EAKT-1636 G3633 – 50 mm 95 - 400 70 - 400 70 - 300 16 - 185 EAKT-1637 G3751 – 67 mm 500 - 800 500 - 800 400 - 800 240 - 630 EAKT-1638 G38

Diameter over Application Range mm2 Raychem Part Mod. Code armour 12 kV 17.5 kV 24 kV 36 kV/42 kV Number Number40 – 67 mm 16 - 120 16 - 95 16 - 35 16 - 25 EAKT-1642 G4250 – 86 mm 150 - 240 120 - 185 50 - 120 35 - 95 EAKT-1643 G4360 – 94 mm 300 - 400 240 - 300 150 - 185 120 - 185 EAKT-1644 G4470 - 110 mm –– –– 240 - 300 240 - 300 EAKT 1645 G45

© T

yco

Elec

troni

cs E

PP 0

795

3/02






All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct andreliable. Users, however, should independently evaluate the suitability of each product for the desired application. Under no circumstances does this constitute an assurance ofany particular quality or performance. Such an assurance is only provided in the context of our product specifications or explicit contractual arrangements. Our liability for theseproducts is set forth in our standard terms and conditions of sale. ALR, AMP, AXICOM, B&H, Bowthorpe EMP, Critchley, Crompton, Dorman Smith, Dulmison, Guro, Hellstern, La Prairie, Morlynn, Raychem, and SIMEL are trademarks.

11kV SINGLE CORE AND 3 CORE INDOOR TERMINATIONSPLASTIC INSULATED CABLE

10 16 25 35 50 70 95 120 150 185 240 300 400 500 800 1000

EPKT-17A1XI EPKT-17E1XI EPKT-17F1XI

OVERLAP IXSU-F 3151

OVERLAP

OVERLAP OVERLAP

EPKT-17A3XIH1 EPKT-17E3XIH1 EPKT-17F3XIH1

IXSU-F 3301 IXSU-F 3311 OVERLAP




IXSU-F3304 IXSU-F 3314 OVERLAP

10 16 25 35 50 70 95 120 150 185 240 300 400 500 800 1000

CROSS SECTIONAL AREA IN SQMM

OVERLAP

EPKT-17D1XI

IXSU-F 3141

EPKT-17D3XIH2

TFTI-3111

EPKT-17D3XIH1

IXSU-F 3341

TFTI-3131

850

TAIL

LE

NG

TH

EPKT-17C1XI

EPKT-17C3XIH1

EPKT-17C3XIH2

EPKT-17C3XIH3

450

TAIL

LE

NG

TH

EPKT-17B3XIH1

IXSU-F 3321 IXSU-F 3331

TFTI-3121

SIN

GLE

CO

RE

EPKT-17B1XI


TFTI-3112 TFTI-3122

IXSU-F 3131


EPKT-17C3XIH4

TFTI-3132

EPKT-17B3XIH3 EPKT-17D3XIH3

KITS ADJACENT TO THIS RANGE, BOTH OVERLAP THIS RANGE.

3 C

OR

E 650

TAIL

LE

NG

TH

EPKT-17B3XIH2

1200

TA

IL

LEN

GTH

EPKT-17B3XIH4 EPKT-17D3XIH4

IXSU-F 3324

11kV SINGLE CORE AND 3 CORE OUTDOOR TERMINATIONS PLASTIC INSULATED CABLE

10 16 25 35 50 70 95 120 150 185 240 300 400 500 800 1000

EPKT-17A1XO EPKT-17E1XO EPKT-17F1XO

OVERLAP OXSU-F 3151

OVERLAP

OVERLAP OVERLAP

EPKT-17A3XOH1 EPKT-17E3XOH1 EPKT-17F3XOH1

OXSU-F 3301 OXSU-F 3311 OVERLAP




OXSU-F3304 OXSU-F 3314 OVERLAP

10 16 25 35 50 70 95 120 150 185 240 300 400 500 800 1000


OVERLAP

EPKT-17C3XOH4

OXSU-F 3141OXSU-F 3131

EPKT-17D3XOH3

EPKT-17D3XOH2


TFTO-3122

EPKT-17C3XOH1

TFTO-3121

OXSU-F 3344

EPKT-17D3XOH4

OXSU-F 3111

OXSU-F 3324

EPKT-17B3XOH3

EPKT-17B3XOH4

TFTO-3112 TFTO-3132

EPKT-17C3XOH2

OXSU-F 3334

EPKT-17C3XOH3

EPKT-17D1XO

EPKT-17B3XOH1 EPKT-17D3XOH1

OXSU-F 3121

EPKT-17C1XO

TFTO-3111 TFTO-3131


SIN

GLE

C

OR

E3

CO

RE

450

TAIL

LE

NG

TH65

0 TA

IL

LEN

GTH

850

TAIL

LE

NG

TH12

00 T

AIL

LE

NG

TH

OXSU-F 3321

EPKT-17B3XOH2

EPKT-17B1XO

22kV SINGLE CORE AND 3 CORE INDOOR TERMINATIONSPLASTIC INSULATED CABLE

10 16 25 35 50 70 95 120 185 240 300 400 500 630 800 1000

EPKT-24D1XI

OVERLAP

OVERLAP TFTI-5142

OVERLAP

EPKT-24D3XIH2

EPKT-24D3XIH3

EPKT-24D3XIH4

10 16 25 35 50 70 95 120 185 240 300 400 500 630 800 1000


OVERLAP

TFTI-5122 TFTI-5132

TFTI-5121 TFTI-5131 TFTI-5141

EPKT-24F3XIH3

EPKT-24F3XIH4

EPKT-24F3XIH2

EPKT-24E3XIH4EPKT-24B3XIH4

EPKT-24E3XIH2

EPKT-24C3XIH4

EPKT-24C3XIH3 EPKT-24E3XIH3


SIN

GLE

CO

RE

3 C

OR

E

450

TAIL

LEN

GTH

850

TAIL

LE

NG

TH12

00 T

AIL

LE

NG

TH

EPKT-24C3XIH2


650

TAIL

LE

NG

TH

EPKT-24B3XIH2

IXSU-F 5321


IXSU-F 5131

EPKT-24E1XI

IXSU-F 5341

IXSU-F 5151

IXSU-F 5331

EPKT-24C1XIEPKT-24B1XI

IXSU-F 5311

EPKT-24B3XIH3

IXSU-F 5121

EPKT TERMINATION NOT ALLOWED, AS TAIL LENGTH MIN ON 24kV INDOOR TERMINATIONS IS 650MM

EPKT-24F1XI

IXSU-F 5141

22kV SINGLE CORE AND 3 CORE OUTDOOR TERMINATIONSPLASTIC INSULATED CABLE

10 16 25 35 50 70 95 120 185 240 300 400 500 630 800 1000

EPKT-24D3X0 EPKT-24F1XO

OVERLAP

OVERLAP TFTO-5142

OVERLAP

EPKT-24D3XOH3 EPKT-24F3XOH3

EPKT-24D3XOH4 EPKT-24F3XOH4

10 16 25 35 50 70 95 120 185 240 300 400 500 630 800 1000


OVERLAP

OXSU-F 5341

EPKT TERMINATION NOT ALLOWED, AS TAIL LENGTH MIN ON 24kV OUTDOOR TERMINATIONS IS 850MM

EPKT-24E3XOH4

TFTO-5122 TFTO-5132

TFTO-5121 TFTO-5131 TFTO-5141

EPKT TERMINATION NOT ALLOWED, AS TAIL LENGTH MIN ON 24kV OUTDOOR TERMINATIONS IS 850MM

SIN

GLE

CO

RE

3 C

OR

E

850

TAIL

LE

NG

TH45

0 TA

IL L

ENG

TH65

0 TA

IL

LEN

GTH

1200

TA

IL

LEN

GTH

EPKT-24E1XO

EPKT-24C3XOH3 EPKT-24E3XOH3

EPKT-24B1XO

OXSU-F 5121 OXSU-F 5131

EPKT-24C1XO


OXSU-F 5331


OXSU-F 5311

OXSU-F 5314

EPKT-24B3XOH3

EPKT-24B3XOH4

OXSU-F 5324

OXSU-F 5321


EPKT-24C3XOH4

33kV SINGLE CORE AND 3 CORE INDOOR TERMINATIONSPLASTIC INSULATED CABLES

10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800 1000

OVERLAP OVERLAP TFTI-6151

IXSU-F 6352

IXSU-F 6354

10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800 1000


OVERLAP

EPKT-36F3XIH4

IXSU-F 6151

EPKT-36E3XIH3 EPKT-36F3XIH3

IXSU-F 6141

IXSU-F 6342

EPKT-36E3XIH4

EPKT-36E1XI

EPKT-36E3XIH2

IXSU-F 6131

EPKT-36F1XI

EPKT-36F3XIH2


TFTI-6131 TFTI-6141

1200

TA

IL

LEN

GTH EPKT-36C3XIH4

IXSU-F 6334

EPKT-36D3XIH4

IXSU-F 6344

850

TAIL

LE

NG

TH

EPKT-36C3XIH3

IXSU-F 6332

450

TAIL

LE

NG

TH


3 C

OR

E

EPKT-36D1XI

EPKT-36D3XIH2

EPKT-36D3XIH3

TFTI-6132 TFTI-6142

SIN

GLE

C

OR

E

EPKT-36C1XI

650

TAIL

LE

NG

TH EPKT-36C3XIH2

33kV SINGLE CORE AND 3 CORE OUTDOOR TERMINATIONSPLASTIC INSULATED CABLE

10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800 1000

OVERLAP OVERLAP TFTO-6151

10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800 1000


OVERLAP

EPKT-36F3XOH4

EPKT-36F1XO

EPKT-36F3XOH3

OXSU-F 6151




EPKT-36E1XO

EPKT-36E3XOH3

EPKT-36E3XOH4

OXSU-F 6352


EPKT-36C3XOH3

EPKT-36C3XOH4

OXSU-F 6332

OXSU-F 6334

EPKT-36D3XOH3

EPKT-36D3XOH4

1200

TA

IL

LEN

GTH

OXSU-F 6131

EPKT-36C1XO EPKT-36D1XO

TFTO-6141

TFTO-6142

650

TAIL

LE

NG

TH

SIN

GLE

C

OR

E3

CO

RE

450

TAIL

LE

NG

TH

TFTO-6132

850

TAIL

LE

NG

TH

TFTO-6131

OXSU-F 6342

OXSU-F 6141

http://energy.tycoelectronics.comEnergy Division

R

Heat-Shrinkable Termination System for Cables up to 36 kV

R

Features:

• Universal termination family for12-36 kV based on SCTM stresscontrol technology

• All applications for polymeric andMIND paper on 1-core, 3-core,armoured and unarmoured cables

• Red non-tracking HVOT tubing provides excellent environmentalprotection

• Can be used in combination withRICS / RCAB / RSRB switchgearconnection systems

EPP038911/02 22.10.2002 18:05 Uhr Seite 4

Over the last three decades, engi-neers in utilities and industry aroundthe world have specified of million’sRaychem cable terminations atdistribution voltages up to 36 kV.Raychem terminations have be-come identified with reliability be-cause of their unparalleled long-term performance – where it reallycounts – in the field. Today there aremany changes influencing the distrib-ution of power at medium voltages.For example, the transition to newtypes of polymeric cable, distributionat higher voltages, and the wide-spread usage of compact switchgear.

Anticipating these industry changes,we have continued to extend andimprove the product range, based onthe extensive experiece both in thefield and at our outdoor test sites incoastal, polluted and desert environ-ments. Now these developments areincorporated in a new generation ofRaychem heat-shrinkable cable termi-nations, that are even easier to selectand install, without compromisingthe reliability of proven materialstechnology. The improved system issimpler to use, because the basic ter-mination components and installationsteps are the same – even if your net-work operates with voltages of 7.2 to36 kV; if you use 12 kV belted papercable and 24 kV water-blocked singlecore polymeric cable; whether youmake equipment connections in acable box or in compact switchgear.Let’s review the main advantages ofthe improved system:

Universal Selection Procedure• Simplifield selection table allows

quick selection based on conductorcross section and voltage class foreither polymeric or MIND paperinsulated cables (For MI draining oilcables, contact your local represen-tative)

• Simple modification codes permiteasy specification of optional accessory kits

• Enhanced range-taking abilitymeans that one kit fits more con-ductor sizes, reducing stockingrequirements

• Unlimited shelf life allows stockingof economic quantities withoutproduct spoilage

Simplifield Cable Preparation• Improved treatment of screen cut

back is compatible with all modernscreen removal techniques

• No tapering of insulation required • No polishing of polymeric insulation

surface• No special preparation of sectored,

or eccentric conductors, or of cablethat is curved after unreeling fromthe cable drum

• Cable preparation steps are similarto those for Raychem joints

Simplified Installation • Components are lightweight and

non-shattering • Clear instruction sheets • Common installation procedure for

polymeric and MIND paper cables • Factory engineered kit permits rapid

on-site installation • No mechanical stress at insulation

screen cutback • Termination accommodates same

bending radius as cable • Visual confirmation of correct

assembly sequence possible afterinstallation

• Rain skirts can be installed to alloweither top or bottom feed

• No soldering of earthing accessoriesrequired

Outstanding Long-Term Reliability • Fully sealed against water ingress

from the environment or from withinthe conductor strands

• Polymeric materials load cycle withthe cable without mechanically stressing termination components and sealants

• Unsurpassed performance in polluted environments, proven over three decades.

Raychem Cuxhaven, West Germany,long-term test site. Raychem termina-tions have been on test at this NorthSea coast location for over twodecades.

The Universal Medium Voltage Termination System for Polymeric and Paper Insulated Cables

EPP038911/02 22.10.2002 18:05 Uhr Seite 5

Paper Insulated Cable (Mass Impregnated, Non-Draining)Indoor Service

oil barrier, insulating tubing (clear) installed over paper insulation

otherwise, installation is the same asfor a polymeric insulated cable

Polymeric Insulated Cable Indoor Service

void filling compound

stress control tubing

non-tracking sleeve with sealant layer

It`s the same system for all types ofpolymeric cable

Single Core Cable TerminationSystem

Polymeric or Paper InsulatedCable Outdoor Service

rain skirts installed over non-tracking sleeve

otherwise, installation is the same asfor an indoor termination

EPP038911/02 22.10.2002 18:05 Uhr Seite 6

three-core breakout installed atend of cable oversheath

otherwise, installation steps are the same as for three single core terminations

The Raychem termination system is compatible with all types ofarmoured cable. The system includes a completerange of solderless accessories forearthing insulation screens and cable armour and for grounding lead sheaths. Also available are insulators and support brackets, insulating boots for equipment connections and glands for easyentry to cable boxes. Fore moredetails please refer to the EPKT and IXSU Termination SystemsDesigner brochure.

Polymeric or Papier InsulatedCable Indoor or Outdoor Service

Three-Core Cable TerminationSystem

EPP038911/02 22.10.2002 18:05 Uhr Seite 7

EPP038911/02 22.10.2002 18:05 Uhr Seite 2

© T

yco

Ele

ctro

nic

s E

PP

038

9 1

1/02

All our indoor terminations for poly-meric or paper insulated cables can be used with RICS (RaychemInsulated Connection System). The RICS, fully insulated, right-angleand straight adaptors make it easy toconnect any type of cable to moderncompact electrical equipment. A special RICS, accommodating aZnO Surge Arrester is now availableas well as a low profile, one piececable termination (IXSU), designedspecifically for applications with verylimited clearances between phases.

We have the universal jointing system for all types of paper andpolymeric cable up to 36 kV. Thesame system allows transition jointsbetween different tree-core papercable and transitions from paper topolymeric cables. Trifurcations withany combination of cables are alsoeasy with the Raychem jointing system.

For more information about jointsand terminations up to 72 kV andother problem-solving products, callyour local representative. We havefield sales offices and offer technicalsupport around the world.

The Tyco Electronics Energy Division

Tyco Electronics Raychem GmbH, Energy DivisionFinsinger Feld 1, 85521 Ottobrunn/Munich, GermanyPhone: +49-89-6089-0, Fax: +49-89-6096345

Energy Division – a pioneer in the development of economical solutions forthe electrical power industry. Our product range includes: Cable accessories, connectors & fittings, electrical equipment, instruments, lighting, insulators &insulation enhancement and surge arresters.

For more information and your country contact person, please visit us at: http://energy.tycoelectronics.com

All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct and reliable.Users, however, should independently evaluate the suitability of each product for the desired application. Under no circumstances does this constitute an assurance of any particularquality or performance. Such an assurance is only provided in the context of our product specifications or explicit contractual arrangements. Our liability for these products is set forthin our standard terms and conditions of sale. ALR, AMP, AXICOM, B&H, BOWTHORPE EMP, CROMPTON INSTRUMENTS, DORMAN SMITH, DULMISON, GURO, HELLSTERN, LA PRAIRIE, MORLYNN, RAYCHEM, and SIMEL are trademarks.

EPP038911/02 22.10.2002 18:05 Uhr Seite 3

Mouldings Product Data 207R045Insulating Boots (MV) to 065

Raychem Product Guide 1 Effective: 23.07.00Electrical Products Section 4 / Part D Supersedes:1/95Division Doc. Ref. M004

Description:Material: -103 Thermoplastic co-polymer material, electrically insulating, non-tracking, erosion and UV-resistant,flexible at low temperatures.Adhesive/Sealant: /89 - Track resistant sealant provides water tight and environmental seal.Application: Insulation over the connection between MV Terminations and bushings in metal boxes.Colour = Red..

.

��

H

P

R

S

Coating

J

W



H J P R S WPart Number min max min max ± 10% ± 10 % ± 10% ± 10 %

a b a b b b b b207R045-103/89 76 32 25 10 200 115 50 4207R045-126/89 76 32 25 10 200 115 50 4207R055-103/89 76 32 35 14 250 165 50 4207R055-126/89 76 32 35 14 250 165 50 4207R065-103/89 76 32 50 24 250 165 50 4207R065-126/89 76 32 50 24 250 165 50 4

ModificationsPart Number Mod. C oModification207R045 R01 H diameter expanded to 86 mm, R dim. cut to 105 mm

R02 H diameter expanded to 95 mm,207R055 R01 H diameter expanded to 86 mm, R dim. cut to 135 mm

R02 R dim. cut to 85 mmR03 H diameter expanded to 84 mm, R dim. cut to 70 mm

H outlet coated with /42207R065 R01 R dim. cut to 115 mm

R02 H diameter expanded to 86 mm,R03 J diameter expanded to 60 mmR04 H diameter expanded to 84 mm, R diameter cut to 140 mm

H outlet coated with /42Notes1. Dimensions in mm. a = as supplied, b = after free recovery2. Coating location approx. as shown in the drawing.3. Material -103 meets requirements of PPS 3011/18. Material -126 meets requirements of PPS 3011/20. Adhesive /89 meets requirements of PPS 3012/3.

Printing: The parts are imprinted with Raychem, part number and batch number.Packaging: 1 pc in poly bag. Labelling: Quantity, Description and batch number.



Description:Material: -103 Thermoplastic co-polymer material, electrically insulating, non-tracking, erosion and UV-resistant,flexible at low temperatures.Adhesive/Sealant: /89 - Track resistant sealant provides water tight and environmental seal.Application: Insulation over the connection between MV Terminations and bushings in metal boxes.Colour = Red.

.

��

P

R

H

Hw

J

Coating

JW

Standard Products/DimensionsPart Number H J P R HW JW

min max min max ± 10 % ± 10 % ± 10 % ± 10 %a b a b b b b b

227R046-103/89 70 32 25 10 85 110 4,5 4,5227R046-126/89 70 32 25 10 85 110 4,5 4,5227R056-103/89 70 32 35 14 115 110 4,5 4,5227R056-126/89 70 32 35 14 115 110 4,5 4,5227R066-103/89 70 32 50 24 135 110 4,5 4,5227R066-126/89 70 32 50 24 135 110 4,5 4,5

ModificationsPart Number Mod. Code Modification227R046 to 066 R01 R dimensions cut to 90 mm227R046 to 066 R03 H diameter expanded 100 mm227R066 R02 J diameter expanded 60 mm, R dimensions cut to 90 mm227R066 R13 H diameter expanded 100 mm, R dimensions cut to 90 mm

Notes1. Dimensions in mm. a = as supplied, b = after free recovery2. Coating location approx. as shown in the drawing.3. Material -103 meets requirements of PPS 3011/18. Material -126 meets requirements of PPS 3011/20. Sealant /89 meets requirements of PPS 3012/3.

Printing The parts are imprinted with Raychem, part number and batch number.Packaging 1 pc in poly bag. Labelling Quantity, description and batch number.

RSRB Part Numbering SystemHeat ShrinkableInsulating Boots

Raychem Product Guide 2 03 December 1997Electrical Products Section 9Division Part D

RSRB X X X X

Product Family

Voltage

7.2 - 17.5 kV = 424 - 36 kV = 6

For later use = 0

Connection/Bushing

Straight = 2Right Angle, Long Bushing = 4Right Angle, Short Bushing = 6

Cross Section mm2

10 - 35 = 2 50 - 95 = 4120 - 300 = 6

Order example : RSRB 4046 = Boot kit for 7.2 kV to 17.5 kV, Right Angle Connection/Long Bushing,

cross section 120-300 mm2

RCABElastomeric insulating bushing boot for bushings up to 17.5 kV

Features

– Tool free application– High-performance insulation

material– Excellent track and erosion

resistance– Removable and reinstallable

Benefits

– Simple and easy installation– Unlimited shelf life– Connection can be energised

immediately after installation– One product for inline and right

angle application

R

Technical dataRaychem elastomeric insulatingboots are moulded parts which fitover the connection between thecable lug and the inline or right-angled equipment bushing to improve phase-to-phase and phase-to-ground insulation. They are usedin switchgear and transformer cableboxes where the air clearances areinsufficient for normal operation, or to protect against flashover dueto rodents or high humidity.

The non-tracking elastomeric housing has excellent erosion resistance, dielectric properties andenvironmental resistance, givingsuperb per-formance in areas ofhigh humidity and electrical stress.

RCAB boots works in combinationwith all Raychem termination productlines including both elastomeric andtraditional heatshrink technology.

RCAB boots are quick and easy toinstall and do not require any tapingof the bushing or the termination.The boot can easily be removed and reinstalled without the need for additional material or tooling, allowing access to the bushingconnection for test purposes.

The universal screw EXRM-1366 isavailable on request.

RCAB right angle or inline application up to 17.5 kV

RCAB family

RCAB 4110 RCAB 4120Maximum system voltage 17.5 kV 17.5 kVBasic impulse level 95 kV 95 kVCollar size No.1 noneBushing diameter 31 - 45 mm 46 - 70 mmBushing types: to DIN, CENELEC, ANSI –– 400/630 ACable cross section 35 - 400 mm2 35 - 400 mm2

Ordering InformationRCAB-4110RCAB-4120

Each kit contains elastomeric insulating boots, collars (if required)for three phases and installationinstructions.

Related Product InformationTest report PPR 1336

Collar for smaller bushing

diameters

Universal screw EXRM-1366

© T

yco

Ele

ctro

nic

s E

PP

078

8 1

0/01






All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct andreliable. Users, however, should independently evaluate the suitability of each product for the desired application. Under no circumstances does this constitute an assurance ofany particular quality or performance. Such an assurance is only provided in the context of our product specifications or explicit contractual arrangements. Our liability for theseproducts is set forth in our standard terms and conditions of sale. ALR, AMP, AXICOM, B&H, Bowthorpe EMP, Critchley, Dorman Smith, Dulmison, Hellstern, La Prairie, Morlynn, Raychem, SIMEL and SUCOFIT are trademarks.

R RCAB

Elastomeric insulating bushing bootfor 630 A bushings, 24 kV

FEATURES

– Toolless installation– High-performance insulation

material– Excellent track and erosion

resistance– Removeable and reinstallable

BENEFITS

– Quick and easy installation– Unlimited shelf life– Connection can be energized

directly after installation

EPP0842NEU 03.04.2000 19:28 Uhr Seite 1

Technical dataRaychem elastomeric insulating boots aremoulded parts that fit over the connectionbetween the cable lug and the inline equip-ment bushing to provide phase-to-phaseand phase-to-ground insulation. They areused in switchgear and transformer cableboxes where air clearances are insufficientfor normal operation, and they also protectagainst flashover caused by rodents or highhumidity.

The non-tracking elastomeric housing has excellent erosion resistance, dielectric properties and environmental resistance,giving superb performance in areas of high humidity and electrical stress.

RCAB boots can be used with all Raychemheatshrink termination product lines.

RCAB boots are quick and easy to installand eliminate taping of the bushing or termination. The boot can be removed and reinstalled easily without the need for additional material or tooling for convenientaccess to the bushing connection for testpurposes.

RCAB inline or rightangle application up to 17,5 kV

RCAB inlineapplicationfor 24 kV

RCAB family

© R

aych

em E

PP 0

842

2/00

RCAB 5120Maximum system voltage 24 kVCollar size noneBushing diameter 46 - 61 mmBushing types: per DIN, CENELEC, ANSI 400/630 ACable cross-section 35 - 300 mm2

The universal screw EXRM-1366 is supplied on request.

Ordering InformationRCAB-5120

Each kit contains elastomeric insulatingboots for three phases and installationinstructions.

Related Product InformationTest report PPR 1383


All of the above information, including drawings, illustrations and graphic designs, reflects our present understanding and is to the best of our knowledge and belief correct and reliable. Users, however, should independently evaluate thesuitability of each product for the desired application. Under no cirumstances does this constitute an assurance of any particular quality or performance. Such an assurance is only provided in the context of our product specifications or expli-cit contractual arrangements. Our liability for this product is set forth in our standard terms and conditions of sale. AMP, ELCON, ELO TOUCHSYSTEMS, HTS, M/ACOM, MADISON, NETCONNECT, RAYCHEM, SIMEL are trademarks of Tyco International Ltd.

Tyco Electronics Raychem GmbHEnergy DivisionHaidgraben 685521 Ottobrunn/Munich GermanyTel. (089) 6089-0 Fax (089) 609 63 45

Tyco Electronics CorporationEnergy Divisionc/o AMP Singapore Pte LtdNo. 26 Ang Mo Kio Industrial Park 2Singapore 569507Tel. 65-4836012Fax 65-4836031

Tyco Electronics CorporationEnergy Division8000 Purfoy RoadFuquay-Varina, NC 27526-9349, USATel. (800) 327-6996Fax (800) 527-8350

Members of the Tyco Electronics Corporation:

• Wedge technology products • Electrical connectors • Cable accessories • Asset protection • Surge arresters • Insulators • Fittings • Associated toolings

EPP0842NEU 03.04.2000 19:28 Uhr Seite 2

Documents

Section 4: Medium Voltage Terminations - up to 42kV. Voltage Terminations - up to 42kV. Cold Applied: ... Elastomeric medium voltage terminations for ... shrinkable cable accessories