421

No-Slack II6000 Series Top Plate

TPL-6000L (Left Side Release Shown)TPL-6000R (Right Side Release)

Note: Numbers in white circles showparts that are available in a kit.

ItemNo. Description Part No. Qty.1 Wedge Stop Rod Nut NUT-319 12 Flat Washer, 5/8" WSH-304-5 23 Wedge Stop Rod Spring SPR-317 14 Wedge Stop Rod KIT-ROD-1108 15 Cotter Pin, 3/16" x 1 PIN-165 46 Bumper Spring SPR-128 17 Handle Spring SPR-338 18 Bushing, 7/16" BSH-115 19 Hex Lock Nut, 1/2"-13 NUT-303-9 310 Bushing, 5/16" BSH-629 111 Timer Spring CD-SPR-236 112 Step Jaw and Wedge set WED-6000* 113 Bushing BSH-1225 1

KIT-RPR-6000*No-Slack II Repair Kit

ItemNo. Description Qty.6 Bumper Spring 17 Handle Spring 18 Bushing, 7/16" 19 Hex Lock Nut, 1/2"-13 310 Bushing, 5/16" 111 Timer Spring 112 Step Jaw and Wedge Set 1

Part No. KIT-PIN-60006000 Series Pin and Bushing Kit

ItemNo. Description Qty5 Cotter Pin, 3/16" x 1 214 Bracket Retainer Pin 215 Bracket Pin 2

Bracket Bushing (pr.) 1

FONTAINE NO-SLACK II 6000 SERIES TOP PLATE

ItemNo. Description Part No. Qty.14 Bracket Retainer Pin PIN-124P 215 Bracket Pin PIN-6000 216 Grease Fitting MSC-375 417 Flat Washer, 1/2" ID, 13/8" OD WSH-304-4 718 Hex Head Bolt, 1/2-13 x 11/2" BLT-302-13 119 Pull Handle PUL-6000P* 120 Secondary Lock LAT-6000* 121 Hex Head Bolt, 1/2-13 x 13/4" BLT-302-14 122 Bumper BPR-6000* 123 Operating Handle OPR-6000 124 Timer TMR-6000* 125 Hair Pin Cotter PIN-336-1 126 Hex Head Bolt, 1/2-13 x 21/4" BLT-302-67 1

Note: Numbers in whitecircles show parts thatare available in a kit.

*Specify left side or right side release byadding an L or R after Part number

Part No. KIT-BPR-6000L6000 Series Bumper Kit

ItemNo. Description Qty22 Bumper 121 Bolt 1/2"-13 110 Bushing 19 Nut 1 6 Bumper Spring 117 Washer - Flat 1/2" ID 2

Part No. KIT-ROD-1108Wedge Stop Rod Kit

ItemNo. Description Qty.1 Wedge Stop Rod Nut 12 Flat Washer, 5/8" 23 Wedge Stop

Rod Spring 14 Wedge Stop Rod 15 Cotter Pin, 3/16" x 1" 1

Part No. BSH-150Bracket Bushing (one pair)

(Various Brackets)

422

FONTAINE NO-SLACK 5092 SERIES TOP PLATEStandard and Heavy Duty

ItemNo. Description Part No. Qty.1 Wedge Stop Rod Nut NUT-319 12 Flat Washer, 5/8" WSH-304-5 23 Wedge Stop Rod Spring SPR-317 14 Wedge Stop Rod ROD-1108 15 Cotter Pin, 3/16" x 1 PIN-165 46 Bumper Spring SPR-128 17 Step Jaw and Wedge Set WED-200-* 18 Bushing, 7/16" BSH-115 19 Jaw and Wedge Spring Set SPR-137-138 110 Cotter Pin, 1/4" X 3" PIN-95 211 Bushing, 5/16" BSH-629 112 Hex Lock Nut, 1/2"-13 NUT-303-9 2

KIT-RPR-5092*No-Slack II Repair Kit

ItemNo. Description Qty.6 Bumper Spring 17 Handle Spring 18 Bushing, 7/16" 19 Hex Lock Nut, 3

1/2"-1310 Cotter Pin 111 Bushing 112 Hex Lock Nut 1

ItemNo. Description Part No. Qty.13 Bracket Pin PIN-135P 214 Bracket Retainer Pin PIN-124P 215 Grease Fitting MSC-375 216 Timer TMR-134* 117 Pull Handle PUL-5092 118 Hex Head Bolt, 1/2-13 x 2" BLT-302-15 219 Flat Washer, 1/2" ID, 13/8" OD WSH-304-4 320 Bumper BPR-5092* 121 Operating Handle OPR-5000-S* 122 Leaf Spring SPR-569 123 Self Tapping Screw, 1/4-20x3/8" SCR-425 1

Note: Numbers in whitecircles show parts thatare available in a kit.

*Specify left side or right siderelease by adding an L or Rafter Part number

KIT-BPR-5092L5092 Series Bumper Kit

ItemNo. Description Qty20 Bumper 118 Bolt 18 Bushing 112 Nut 1 6 Bumper Spring 119 Washer 2

FONTAINE AIR CYLINDER IDENTIFICATION

*Specify left side (L) for Driver's Side or right side (R) for passenger side by adding an L or R after Part number

This Style Head is nolonger available.Replace withTPL-6000 Series

423

FIFTH WHEEL ASSEMBLIESFleetMaster Stationary Fifth Wheel ModelsWith XA-201 Series Top PlateCapacity: 45,000 lbs. Maximum Vertical Load

150,000 Maximum Drawbar Pull

3500 Stationary Fifth Wheel ModelsWith XA-351 Series Top PlateCapacity: 55,000 lbs. Maximum Vertical Load

150,000 Maximum Drawbar PullNominal Approx. Replm't

Model FW Height Weight BracketModels With Mounting BaseFW35-7801XL 8.69" 313 XA-7801FW35-7802XL 7.69" 315 XA-7802FW35-7803XL 6.69" 308 XA-3503FW35-7804XL 5.59" 302 XA-7804Models With Bracket for Angle MountingFW35-7821XL 8.31" 280 XA-7821FW35-7822XL 7.31" 282 XA-7822FW35-7823XL 6.31" 276 XA-7823FW35-7824XL 5.31" 269 XA-7824

FW35-7802XL FW35-7822XL

Note:All wheels not stocked are available as a special order.

Fifth Wheel Top Plates Available From Stock:

FleetMaster FW8 Series Fifth WheelsAssembly Part No. XA-201-A-L-P

(Left Hand Release)

Top Plate Assemblies For3500 (XA-351) Series Fifth Wheels

Assembly Part No. XA-351-03505(Airlocks/Pocket Insert)

Rebuild Kit Part No. RK-351-03505

Assembly Part No. XA-351-A-L-P(Left Hand Release)

Assembly Part No. XA-351-A-P(Right Hand Release)

Assembly Part No. XA-3501-UB(With Air Jaws)

Rebuild Kit Part No. RK-63502

Nominal Approx. Replm'tModel FW Height Weight BracketModels With Mounting BaseFW8-7801XL 8.69" 293 XA-7801FW8-7802XL 7.69" 295 XA-7802FW8-7803XL 6.69" 288 XA-7803FW8-7804XL 5.59" 282 XA-7804Models With Bracket for Angle MountingFW8-7821XL 8.31" 260 XA-7821FW8-7822XL 7.31" 262 XA-7822FW8-7823XL 6.31" 256 XA-7823FW8-7824XL 5.31" 249 XA-7824

XA-3501 SERIES / XA-351 SERIES IDENTIFICATION

424

REBUILD KITS FOR HOLLAND XA-351 SERIES TOP PLATE ASSEMBLIES

Part No. RK-351-07296 Lock KitPart No. RK-06973-1 Bracket Pin & Cushion

425

Qty.Item Part No. Req'd Description1 RK-63503 1 Lock Jaws2 XA-1313 2 Lock Pin3 XB-5 2 Cotter Pin 1/4" x 2"4 XA-1703-F 1 Yoke Sub-Ass'y5 XB-1505 1 Spring6 XA-1706 1 Yoke Shaft7 XB-02312 1 Lock Adjustment Tag8 XB-1127 1 Rubber Washer9 XB-PW-1316-112 1 Washer 11/2 OD x 13/16" ID10 XB-HNH-34-F 1 Locknut 3/4"-1611 XB-T-49 3 Washer 13/4" OD x 9/16" ID12L RK-1707-M 1 Left hand release handle

sub-ass'y. (Part No. (11)must be installed on handlefor complete assembly)

12R RK-1707-6 1 Right hand release handlesub-ass'y. (Part No. (11)must be installed on handlefor complete assembly)

13 XA-1705-7 1 Cam Plate14 XA-1029 1 Roller15 XB-2083 1 Bolt 1/2"-10 x 13/4"16 XB-T-69-A 1 Locknut, 1/2"-2017 XB-1030-1 2 Washer18 XA-1507 1 Roller19 XB-CX-58-F-134 1 Bolt 5/8"-18 x 13/4"20L XA-3542-L 1 Secondary Lock, LH20R XA-3542-R 1 Secondary Lock, RH21 XB-2149 1 Torsion Spring22 XB-21-S-500-2750 1 Roll Pin23 RK-05329 1 Lock Guard

Qty.Item Part No. Req'd Description24 XB-1044 1 Torsion Spring25 XA-1055 1 Pin26 XB-16 2 Cotter Pin 1/8" x 1"27 XB-H-38 2 Grease Fitting*28 XA-3542-M 1 Manual secondary lock

handle*29 XA-3528 1 Manual Secondary Lock**30 XA-01241 2 Lock Pin Bushing**31 XA-01242 2 Lock Pin Bushing**32 XB-21-S-250-1875 2 Roll Pin - MUST be used

with part nos. (2) whenwheel is equipped with lockpin bushings

***33 XA-2016 2 Bracket Pin***34 XB-21-S-375-1750 2 Roll Pin***35A XB-1604-5 2 Rubber Bushing (For fifth

wheels mfd. prior to 5/82)***35B XB-0011-1 2 Rubber Bushing (No longer

avail. - order XA-0011-2and see service bull. no. 16for instructions)

***35C XB-0011-2 2 Rubber Bushing (For fifthwheels mfd. after 6/87)

***36 TF-0110 1 Kingpin Gauge***37 TF-0237 1 2" Lock Gauge***38 TF-TLN-5001 1 Kingpin Lock Tester

1

2

456

789

10

11

18

19

20L

12L

17

12R 1711

13

14

15

1611

22

11

21

23 2425

263

20R

35A

35B

35C

30A30B

31

3227

34

33

28

29

36

38

37

NOT INCLUDEDIN REBUILD KIT

MODELS EQUIPPED WITHLOCK PIN BUSHINGS

MODELS EQUIPPEDWITH MANUAL

SECONDARY LOCK

* Additional parts included in RK-63505, RK-63506, RK-63510,or RK63511 rebuild kits.

** Additional parts included in RK-63508, RK-63509, RK-63510,RK-63511 rebuild kits.

*** Not included in rebuild kits.

REBUILD KITS FOR HOLLAND XA-3501 TOP PLATE ASSEMBLIES

StockingRebuild Kit

Part Numbers:RK-63500 RH ReleaseRK-63501 LH Release

Part No. RK-63503(Lock Kit For XA-1501-BA & XA-3501-A)

426

BUSHINGSBUSHINGSBUSHINGSBUSHINGSBUSHINGS

Qty.Item Part No. Req'd Description

1 XB-1007 1 Comp Spring, 1-5/8"OD x 52 XA-1119 1 Plunger3 XB-15 1 Set Screw4 XB-T-49 1 Plain Washer 1/2"

5L RK-1117-1L 1 Left Hand Release Handle(Item No. (4) must be installedon handle for complete assembly)

5R RK-1117-1 1 Right Hand Release Handle(Item No. (4) must be installed onhandle for complete assembly)

6L XA-1118-2-L 1 Left Hand Cam Plate6R XA-118-1 1 Right Hand Cam Plate7 XA-1029 2 Roller8 XB-1030 3 (For RH) Washer -1/2 ID x 2-1/4" OD9 XB-2083 1 Hex hd screw 1/2"-20 x 1-3/4"

with locking patch10 XB-1031 1 1/2"-20 x 2" hex hd. cap screw11 XB-403 1 Spring12 XD-3123-1 1 Lock Adjusting Wedge13 XB-2001 1 5/8"-11 x 3-3/4" Soc. hd. screw14 XB-HNH-58-C 1 5/8"-11 Locknut15 XB-1006 (Green) 1 Comp. Spring 1-1/4" OD x 5"

16A XA-1102 1 Lock Set16B17 XA-1016 1 Hinged Lock Pin18 XB-5 1 Cotter Pin 1/4" x 2"19 XA-1621 1 Lock Guard20 XB-1044 1 Torsion Spring21 XA-1055 1 Pin22 XB-16 2 Cotter Pin 1/8" x 1"*23 XA-1668 1 Safety Lock Block*24 XB-NRJ-34-F 1 Jam Nut

Qty.Item Part No. Req'd Description*25 XA-1674 1 Safety Release Arm*26 XB-B-919 1 1/2" Dia. Steel Ball*27 XB-V-932 1 Compression Spring*28 XB-V-1025 1 Set Screw 5/8"-18**29 XB-767-C 1 Grease Fitting**30 XB-21-S-250-1875 1 Roll Pin**31 XA-279 1 Lock Pin Bushing**32 XA-1016-C 1 Hinged Lock Pin**33 XA-278 1 Lock Pin Bushing*34 XB-H-38 2 Grease Fitting*35 XA-2016 2 Bracket Pin*36 XB-21-S-375-1750 2 Roll Pin

*37A XB-1604-5 2 Rubber Bushing (for fifthwheels mfd. prior to 5/28)

*37B XB-0011-1 2 Rubber Bushing (nolonger) available-orderRK-03809 bushing &riser kit or refer toservice bull. no. 16 forinstructions

*37C XB-0011-2 2 Rubber Bushing (forfifth wheels mfd. after6/87)

38 TF-0110 1 Kingpin Gage39 TF-0237 1 2" Lock Gage40 TF-TLN-5001 1 Kingpin Lock Tester41 XB-02846 2 Washer Lock Tester

Washer (LH only)1/2" ID x 2-5/8" OD

* Additional parts included in RK-63505, RK-63506, RK-63510, orRK63511

** Additional parts included in RK-63508, RK-63509, RK-63510,RK-63511 rebuild kits.

REBUILD KITS FOR HOLLAND XA-2009 TOP PLATE ASSEMBLIES

427

3

5

4

6

1

12R

2

2919

10R

30

9

9A

8B8A

9

88

10L 7

18

13

19

16

20

17

15

11

14 20

12L

31

33

32

282626 27

22

23

21 2425

Qty.Item Part No. Req'd Description1 XB-06329 1 5/8"-20 x 4.25" hex hd. Bolt2 XB-403 1 Spring3 XD-06328 1 Adjusting Wedge4 XB-06179-1 1 Locknut 5/8"-115 RK-06330 1 Plunger Spring6 XA-08081 1 Locking Plunger7 XE-08113 1 Cam Arm8 XA-08162 2 Roller8A XB-T-49 2 1/2" Washer8B XA-06332 2 Roller9 XB-8558 2 SHCS 1/2"-13 x .75"9A XB-06331 2 TORX SBHCS 1/2"-13 X 1.25"10R XA-06334 1 Right Hand Release Arm10L XA-07388 1 Left hand Release Arm11 XB-06335-1 1 Extension Spring12R XA-08548 1 Right Hand Release Handle12L XA-08546 1 Left Hand Release Handle13 XB-T-199 1 5/8" Washer14 XB-06336 1 Cotter Pin, .19" x 1.25"15 XA-08114 1 Hinged Lock

Qty.Item Part No. Req'd Description16 XA-06344 1 Lock Pin17 XB-5 1 Cotter Pin .25" x 2"18 XB-H-38 2 Grease Fitting19 XB-T-69-A 2 Lock Nut, 1/2"-2020 XB-C-95 2 1/2"-20 x 1.25" hex hd. cap*21 XA-06349 1 Manual secondary Lock arm*22 XB-767-C 1 45 Deg. Grease Fitting*23 XA-1016-C 1 Secondary Lock Pin*24 XB-5 1 Cotter Pin .25" x 2"*25 XA-06345 1 Secondary Lock*26 XB-1204 2 7/16" Washer*27 XB-1028-1 1 Spring*28 XB-16 2 Cotter Pin 1/8"-1"*29 XE-06356 2 Bracket Pin*30 XB-0011-2 2 Rubber Bushing*31 TF-TLN-08284 1 Helper Block*32 TF-0110 1 Kingpin Gage*33 TF-TLN-1000 1 2" Lock Tester*34 TF-TLN-5000 1 2" Lock Adjustment Tool

REBUILD KITS FOR HOLLAND XA-201-A-L TOP PLATE ASSEMBLIES

HOLLAND LOCK GUARD KITS & TOOLS

StockingRebuild Kit

Part Numbers:RK-201-A2 RH ReleaseRK-201-A2L LH Release

"A"

Bracket Assemblies - Air and Manual Release Brackets OnlyPart No. XA-7501Bracket w/ mounting base 8.88"Part No. XA-7824Bracket for angle mounting 5.31"

Fifth Wheel Slide Plate for FW8 or FW2535w/o Mounting AnglesPart No. XA-0751-3A

Part No."A" Air Manual

8.62" XA-7001 XA-70117.62' XA-7002 XA-70128.12" XA-7301 XA-73116.62" XA-7003 XA-7013

"A" = Fifth Wheel Height

FW2500 AND FW2535 SERIES SLIDE BRACKET PARTS - AFTER MAY 1, 1982

428

Lock Guard Kit ForXA-3501 Series Top Plates

Kit No. RK-05329

Sliding Fifth Wheel Air Line KitTen foot coiled .25" OD nylon tube with wire guards and.25" NPT swivel fittingsPart No. RK-2500-10

XB-01959

XB-01961 Nylon Tie

XB-01960 XB-0199690 Deg. Fitting

Bulkhead Fitting With Female.25" NPT Connectors

Kingpin Lock Tester ToolThe HOLLAND kingpin lock testers are designed forchecking fifth wheel locking action and lock adjustment inthe shop or on the lot.

2" Tool: Part No. TF-TLN-5001

Coiled Air Line Kit for Fifth WheelsCoiled nylon tubing with wire guardsand fittingsPart No. 1010067

Cushion and Pin Rebuild KitThis kit is also included in rebuild kits RK-63500-1,RK63501-1, RK62001 and RK62001-1.Consists of: 2 XA-2016 Pins

2 XB-0011-2 Bushings2 XB-21-S-375-1750 Roll Pins

Part No. RK-04413

MISCELLANEOUS FIFTH WHEEL PARTS

XB-1044

XB-16

XA-1055

XA-3514

XA-1621

XA-1055

XB-1044

XB-16

Lock Guard Kit ForXA-2009 Series Top Plates

Kit No. RK-05328

Spring CompressorDesigned for springs and

pins on Hollandsliding fifth wheels

Part No. TF-TLN-2500

King Pin GaugeUse to check condition of

kingpin; indicates if pinshould be replaced.Part No. TF-0110

HOLLAND NO TILT REBUILD KITFifth Wheel Rebuilt Kit

for 7.88 Fifth Wheel Height

on No-Tilt Application

Kit Includes: XA-1935, XA-05818, XA-05819, XA-1934, XA-130-D, XA-1936-1, XA-04572

Part No. RK-06122

429

AIR CYLINDER SPECIFICATIONS FOR AIR SLIDER BRACKETS

Air Release - 8.62" and 7.62" Fifth Wheel Heights

HOLLAND STAINLESS STEEL FIFTH WHEEL AIR CYLINDERS

Hole to Hole Dim. AirPart No. Extended Retracted Stroke Inlet Used OnXA-2524-R-12 37.47 22.59 14.88 Both Ends TF-675XA-2524-R 19.40 12.63 6.77 Blind End Sliding Fifth

WheelsXA-2524-R-4 13.96 10.35 3.61 Blind End FW1560

SeriesXA-2524-R-13-X 11.47 9.48 1.99 Blind End FW2800

SeriesFW2900Series

XA-2524-R-13-1 9.47 7.48 1.99 Blind End FW1500SeriesFW3500Series

XA-2524-R

XA-2501

XB-2502

XA-01586

XA-2503

XA-0372-A

430

Conmet Simplex II Top PlatesSpecifications:

Vertical load capacity 70,000 lbs.

Trailing load 200,000 lbs.

Top plate weight 260 lbs.

Operation:

Slack adjustment Up to 11/32" before jaw replacement.

Operating rod Minimal effort, straight pull design. Air-operated release. Available withtouchloc air-operated releasesystem. Available in right-hand andleft-hand models.

Safety latch Visual indication of a positive coupling,also serves as a secondary lock.

Service life Exceeds life of tractor. Maintenance

Maintenance:

Service required No lubrication required at pivotconnection.Routine: grease and visually check topplate, adjust slack as required.

Jaw replacement Fifteen minutes to replace; fifth wheelremains on tractor.

Disassembly Pull one clinch pin to remove slackadjustment pin and jaw.

Handle replacement Five minutes toreplace; fifth wheel remains on tractor.

SIMPLEX SERIES TOP PLATES

Part No. 4102700Conmet Simplex II Top Plates

Part No. 10402700Conmet Simplex Lite Top Plates

Conmet Simplex Lite Top Plates

Specifications:

Vertical Load Capacity 55,000 lbs.

Trailing Load 150,000 lbs.

Top Plate Weight 220 lbs.Option

Operation:

Slack Adjustment Up to 11/32" before jaw replacement.

Operating Rod Minimal effort, straight pull design.Air-Operated Release Available with

TouchLoc air-operated release system.

Safety Latch Provides the driver with a clear visualindication that the wheel is properlycoupled.

Service Life Exceeds life of tractor.Manance

Maintenance:

Service Required No lubrication required at pivot connection.Routine: grease and visually check topplate, adjust slack as required.

Jaw Replacement Fifteen minutes to rebuild, while the topplate remains on tractor.

Handle Replacement Five minutes to replace, while fifthwheel remains on tractor.

Disassembly Pull one clinch pin to remove and replaceeccentric adjustment pin and jaw.

Warranty 5-years or 500,000 miles

CONMET-SIMPLEX FIFTH WHEEL PARTS

431

Part No. Description4000583 2 Rubber, Bracket4109916 1 Eccentric Jaw Pin4109930 1 Jaw, LH84787 2 Grease Fittings4000585 2 Clinch Pins 3/8" x 1-1/2"9900170 1 Clinch Pin 3/16" x 1-1/4"

SIMPLEX OLD STYLE REPAIR KITBEFORE 1988Part No. 4000135

Part No. Description4109935 Jaw4109916 Standard Eccentric Pin9900170 1 Clinch Pin 3/16" x 1-1/4"

SIMPLEX & SIMPLEX II LH JAW KITPart No. 4000501

Part No. Description4109920 Jaw4109916 Standard Eccentric Pin9900170 1 Clinch Pin 3/16" x 1-1/4"

SIMPLEX & SIMPLEX II RH JAW KITPart No. 4000503

Part No. Description4100328 Bracket Shoes4000582 Bracket Pads4000584 Bracket Pins4000585 Clinch Pins 3/8" x 1-1/2"

SIMPLEX & SIMPLEX II BRACKETCONNECTION REBUILD KITPart No. 4000504

Part No. Description4100342 Operating Rod4101250 Safety Indicator5400711 Safety Indicator Pin9900181 Slotted Spring Pin84261 Cotter Pin

SIMPLEX II OPERATING ROD KITPart No. 4000509

Part No. Description4100357 Operating Rod - 2pc.4100150 Safety Indicator4100180 Weld Stud9900113 Flange Nut

SIMPLEX IIR OPERATING ROD KITPart No. 4000510

Part No. Description4000582 Bracket Pad

SIMPLEX & SIMPLEX IIBRACKET PAD KITPart No. 4000528

Part No. Description4100767 Cover Plate4109931 Lock1200706 Lock Spring842611 Cotter Pin5400766 Lever Bar Pin4100712 Lever Bar

SIMPLEX II LOCK KITPart No. 4000572

CONMET-SIMPLEX REPAIR KITS

432

SIMPLEX TOUCHLOC AIR OPERATED FIFTH WHEEL UNLOCKING SYSTEM

Can be operatedmanualy at anytime

Air cylinder unlocks fifth wheelfrom tractor cab. Parking brakemust be set to opperate.

Air cylinder stainless housing withstands yearsof exposure

JOST FIFTH WHEEL

Fig. Description Part No. Fig. Description Part No.1 Cushion ring bolt SK 75014-02 14 Locking bar bolt, compl. SK 3221-012 Cushion ring fixture SK 3105-93 15 Lever SK 3105-1403 Cushion ring insert SK 3105-92 16 Locking bar SK 3205-064 Pivot pin for lock jaw SK 72106-67 17 Lock jaw SK 1489 LZ5 Collar SK73105-95 18 Lock jaw tension spring SK 8476 Bracket pin SK 73104-05 19 Eye bolt SK 2106-697 Tab washer SK 3104-46 20 Ring SK 2106-708 Hex bolt SK 73121-28B 21 Guide piece SK 3205-079 Release handel spring SK 70993-00 22 Adjusting bolt w/ hex nut SK 3105-151

10 External tooth lock washer SK 70301-00 23 Double tension spring SK 3105-2011 Hex bolt SK 73121-28B 24 Lubrication tubing, compl. SK 3108-0212 Release handle SK 73105-15 25 Tubing clamp SK 3121-1313 Hex head bolt, compl. SK 1513

Fig. Repair Kits Part No.5, 6, 7, 8 Bracket pin repair kit SK 73121-551, 2, 3, 4, 17, 18, 19, 20 Locking device repair kit SK 3105-931-25 Repair kit (all parts) SK 3105-92

JSK 37H

Part No. 4101250Simplex II Safety Latch

Part No. 4000218Simplex II Start PullOperating Rod

One easy motion unlocks trailer directly Operable only when parking brake is engaged Manual release back-up system Available for retrofit Three year warranty

Part No. Description4000273 Simplex Lite TouchLoc Mechanism4100213 Simplex II TouchLoc Air Cylinder

Part No. Description4300145 TaperLoc Air Cylinder

433

Replacement Aft Trailer King Pin SectionsComplete With Weld-On Kingpin Installed

Welding procedures and materials used complywith accepted OEM standards

For 96" Wide trailer 951/4" Wide301/2" Fore & Aft LengthPart No. 1147900

For 102" Wide Trailer 1011/4" Wide301/2" For & Aft LengthPart No. 1147904

"Maltese Cross" KingpinFor 1/4" and 5/16"

Bolster Plate2" Kingpin With Housing

Part No. 1135924

Bolster PlatePart No. Thickness1135920 .25"1135921 .38"1135922 .50"

KP-T-809-CF .25"KP-T-809-F .38"

TRAILER KINGPINS

Conduit locations centered at 505/8" and 21/4" on both sides.

**For Use on Dry Van Trailers Only

Conduit locations centered at 475/8" and 21/4" on both sides.

High DensityPolyethylene DiscEliminates the problem of a dry fifth wheelplate. Installs on trailer plate around kingpinusing steel retainer ring.

Complete AssemblyPart No. 1010501Retainer Ring OnlyPart No. 1010500

Bolt On Replaceable 2 Style Kingpins

Part No. KP-08822 Diameter, 302-363 Brinell Hardness,38 Upper Coupler, 1.44 Counter Bore

DOUBLE SPOOL KINGPIN Part No. Bolster Plate Thickness KP-T-880-1 .38" 2" SAE KINGPIN A Dimension= 2.00" B Dimension= 1.50"

A B