Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
1015crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
Section 30Parts and Service
Section 30...1015
Parts and Service ...1015Lubricants...1016-1018 Misc. Chemicals...1019Lubricants Misc....1019
Shop Chemicals...1020-1021 Loctite Gasketing...1022
Gasketing...1023 Threadlocking...1024
Brake Products...1025-1026 Leak Detection...1027
A/C ...1028 Floor Mats...1029
Service Supplies...1029 Seat Covers...1030Service Dept....1031
Silencer Bands...1032Carbide Bits for Brake Lathes...1033
Tire Valves and Caps...1034Kex Tire Repair...1035-1036
1016 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
WD-40®Stops squeaks, protects metal, loosens rusted parts, frees sticky mechanisms. Displaces moisture. Typical proven uses at home, on the job, on the farm, and recreational. 12/case.
12 oz. aer.............CRZ WD40
Gallon........CRZ WD401G
Permatex®anti-Seize™ Lubricant
Resists temperatures up to 2000ºF. High performance. Conforms to MIL-A-907E. A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Temp. range -60º tp 1200ºF. Salt, corrosion and moisture resistant. Ideal for marine use.
8 oz. brush top bottle LOC 133K 12 oz. aer. LOC 133MA
LubricantsruStek Penetrant Lubri-cant
Deep, fast penetration. Immediate release of rusty nuts, bolts, fittings. Long lasting lubrica-tion of door locks, hinges and springs. Dissolves rust, gum and corrosion. Contains graphite. 12/case.
16 oz. aer.........CRS ARB
ruStek PLuS 4Lubricant, rust penetrant, rust inhibitor, de-moisturizer. Displaces moisture. Dries ignitions. Penetrates through rust. Stops rust and cor-rosion. Lubricates, resists wear. Cleans and de-greases. 12/case.
16 oz. aer.........CRS AR4
White GreaSe
A superior lithium lubricant for: striker plates, door latches, hinges, channel guides, window and seat regulators. White. 12/case.
16 oz. aer.........CRS AGW
reD Lube
Penetrates as a liquid, thickens to a grease. Excellent for hard to reach areas. Non-flammable, high temp. Resists extreme pressure, water, salt. 12/case.
16 oz. aer.........CRS AGR
cheetah GreaSecLear PenetratinG GreaSe
Maximum penetration, rapid setup. Teflon enhanced, su-perior adhesion. Temperature and water resistant. 12/case.
20 oz. aer...........CRS ACG
cheetah GreaSe iS Great For Door JambS, hooD SPrinGS anD Deck LiD SPrinGS. it’S Water reSiStant!
100% Pure hi-ViScoSity SiLicone SPray
Superior long lasting pure silicone lubricant. Lubricates and protects. Effective tempera-ture range from -65ºF. to +475ºF. For weather-strip, sticking windows, squeaky dashboards. 12/case.
16 oz. aer....CRS ASH
Dry Lubricant A clear, stainless lubricant for: metal, vinyl, glass, rubber, plastic, fabric. Contains Teflon (Dupont Reg. T.M.). Contains no silicone, body shop safe. Safe on plastics. Ideal for squeaking, binding windows, chattering wiper blades, pickup sliding win-dows, zippers and snaps on boat covers and convertible tops. 12/case.
16 oz. aer........CRS ATL
1017crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
aLiSyn® aeroSPace LubricantS Pro 21 uLtra hiGh-PerFormance aLL-PurPoSe Synthetic SPray GreaSe
The ultimate in lubrication protection. Repels moisture. Won’t run or drip. Temp Range -80ºF. to 600ºF. Will not attract dust/dirt. Long lasting anti-rust protection. 9 oz. trigger aer. CRZ 1088
Door-eaSe® StainLeSS Stick Lubricant
Clean, easy way to lubricate exposed surfaces. Prevents squeaks, wear, and rust. Stops sticking. Apply like a crayon. 6/Box.
Large stick. AGS DE3
Lith-eaSe® White Lithium GreaSe
Top grade, multipurpose, for auto, farm, marine and shop. Superior film strength, water and heat resistance, and rust pro-tection. All weather - all temps. 8 oz. tube AGS WL8 1 lb. container AGS WL15
Lock-eaSe® GraPh-iteD Lock FLuiD
Year ‘round lock protection seals out moisture, protects against lock freeze ups. Pre-vents sticking and corrosion. Leaves a long wearing protec-tive film on locks and other mechanisms. 3.5 oz. aer. AGS LE5
SiL-GLyDe® LubricatinG comPounD
A longer lasting, high film strength lubricant for all surfaces. Use on rubber, metal, wood, and glass. Weatherproof performs from -20ºF. to +400ºF. Recommended for con-tact points on brake backing plates. 8 oz. tube. AGS SG8
other carDeD SPeciaLtieS
Lock De-Icer. 1/2 fl. oz. tube. ................. AGS MZ1
Extra-Fine Graphite. All purpose dry powder lubricant.
6 gm. tube. ....................... AGS MZ2
Kable-Ease. Cable lubricant. 1/2 fl. oz. tube. .................. AGS MZ4
Jax LiFt truck anD SLiD-inG tanDem Lubricant
Increases ram life, no bind-ing. Prevents seal leak-age-oil will not drip on floor. Decreases wear on channels and uprights 80% or more. Adheres where other greas-es rub off. No mess, no waste, easily applied. May be carried in the cab and applied as needed-touch up bare spots. Contains Moly. Although metal surfaces appear shiny, the moly film is ever present, thus protecting any metal to metal surface contact. 12/Case.Vertical columns and slidesElevator guide railsAnti-Friction surfacesLeader Pins 10 oz. aer CRZ JAX106
marVeL air tooL oiL
Lubricates and protects. Re-moves gummy deposits.
4 oz. CRZ 080
Quart CRZ 085
Quaker SuPreme PoWer SteerinG FLuiD
Is compatible and can be mixed with all power steer-ing fluids. Protects against foaming, oxidation, rust and corrosion. Prevents harden-ing and shrinking of seals. Eliminates power steering squeaks. Provides quieter, easier and smoother steer-ing. 12 fl. oz. CRZ PSF12
SuPer Lube aeroSoL
Super Lube Aerosol is a multi purpose synthetic lubricant with syncolon (PTFE). It is safe to use on anything that slides, swivels, rolls or squeaks. It withstands temperatures within a range of -45º to 450ºF. It is a heavy duty lubricant that is com-patible with most other lubricants. It is USDA authorized-rated H-2 for use in federally inspected meat and poultry plants. 11 oz. aer. CRZ 31110
Lubricants Pb bLaSter
PB Blaster Penetrating Catalyst eliminates fighting with rusted and frozen parts. Unique Capillary Action al-lows PB to “Pull” itself uphill and into the tightest cavities to attack rust from all angels. PB penetrates rust to break the surface tension and quickly free the rusted or im-mobilized part. 6/case. 16 oz. aer. CRZ 16PB
1018 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
LubrimaticGear oiL
Sae 80W/90 ePPremium blend contains extreme pressure additives to provide heavy-duty protection. Outstanding for use in garden tillers and other equipment. Recommended for automotive, tractor, truck and industrial applications such as manual transmissions, differentials or other gear boxes which require heavy-duty multi-purpose lubricant. Meets API MT-1, GL-5, MIL-L-2105D, and Mack GO-G/H/I specifications.
Quart bottle with spout cap PLW 11500 5 gallon drum PLW 11510
SuPer-Lube Premium hyDrauLic oiL
Specially formulated to handle high pressure, heavily loaded systems. Fully inhibited with anti-oxidation, anti-rust and anti-foam additives. Meets Denison, Vickers, Cincinnati Milacron and other pump standards.
Specifications ISO 32 API gravity 32 Flash, COC: 400°F Pour point -25°F
ISO 32 5 gallon container. PLW 11723
DiSc/Drum brake WheeL bearinG GreaSe
LubriMatic Disc/Drum Wheel Bearing Grease meets high temperature requirements of all disc and drum brakes and similar applications. Meets Ford specification MIC 198-A. Polyurea base.
Rated GC-LB by NLGI. NLGI #2, drop point 520°F.
14 oz ctg. PLW 11465 35 lb. drum PLW 11384
Lubrimatic® motor aSSembLy White GreaSe
For engine rebuilding and other auto-motive applications. Also excellent for electrical connections.
10 oz. tube PLW 11395
hiGh temPerature WheeL bearinG GreaSe Meets high temperature require-ments of disc brakes and similar applications. Also excellent for lubri-cating wheels with drum brakes. 1 lb. can
1 lb. PLW 11380
1019crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
VaSeLine®100% Pure PetroLeum JeLLy
Contains white petroleum, USP.
13 oz. jar.Part #.................CRZ VASELINE
3m™ SPray Lube
Clear, flowable, high perf. general pur-pose grease. Flows as liquid then sets up to a grease. 12 per case.
16 oz. Aerosol ................. MMM 8878
Permatex® hyDrauLic Jack oiL
Improves lubrication in all types of hy-draulic units. Prevents rust and sludge buildup. Permits hydraulic actuator to function properly in temps from -49ºF. to 120ºF. Maintains proper viscosity. Contains antioxidant, anti-rust and anti-wear additives for maximum service life. Noncorrosive formula. 6/case.
Gallon ..................................LOC 78F
Lubricants Misc.
tooL cuttinG oiL Clear film for viewing work. Increases tool life. Use for cutting, drilling & tapping on all metals. Sprays in any position.
18 oz...............SEY 201557
corroSion xSpace-age tough lubricant. Unbeat-able penetrant. Multi functional product that stops and prevent rust or corrosion on any metal surface, is a superior lubricant and an unbelievable penetrant.
16 oz.............CRZ 90102
Water PumP Lube anD anti-ruSt by Gunk®Concentrated rust inhibitor and water pump lubri-cant. Ideal for all types of water cooled engines.
11 oz..............CRP C1012
PoWer SteerinG FLuiD by PyroiL®Helps maintain efficiency, performance and the condition of power steering units. Will not clog of foam. For year round use.
12 oz..............CRP M2713
Misc. Chemicalsheet®For all fuel injected & carbu-reted gasoline engines. Gas line antifreeze & fuel system dryer. Quick starts. Absorbs water. Inhibits corrosion.
12 fl. oz. CRZ HEET
WinDShieLD De-icer
Aerosol.
Part # CRP DE1
WaSP anD hornet kiLLer
20 ft. range.
20 oz. aer. 12 per case.Part #............DYM A424
1020 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
WeLD SeaL
Heavy duty, zinc rich, fast drying weld-thru primer. Restores factory zinc coat-ings on inner panels and underbody areas. Highly resistant to salt corrosion and water.
16 oz. aer. 12 per case.Part #..........CRS ASW
Leak trace
Locates air, dust, water leaks around weather-stripping. Spots transmission leaks. Leaks show up as powder is displaced.
12 oz. aer. 12 per case.CRS ATR
muScLe anD muScLe Junior non-chLorinateD carb & choke cLeaner
No chlorinated solvents that can contaminate waste oil. Safe on sensors. Removes carbon, gum and varnish. Also cleans linkages, P.C.V. valves, thermostats, transmis-sion valve bodies and manifold heat controls. 12 per case.
20 oz. aer. CRS ACC 16 oz. aer. CRS AMJ
Jet bLaSt non-chLorinateD carb & choke cLeaner
No chlorinated solvents that can contaminate waste oil. Safe on sen-sors. Powerful delivery blasts away gum and varnish. Economical jumbo can. Also cleans linkages, P.C.V. valves, thermostats, transmission valve bodies, manifold heat controls. 12 per case.
24 oz. aer. CRS ACJ
Paint, GaSket anD DecaL StriPPer
Ideal for basecoat/clearcoat re-moval without harming primer. Fast, easy removal of: paint, gaskets, decals, simulated woodgrain, carbon deposits.
20 oz. aer. 12 per case.Part #...........CRS AGD
battery terminaL cLeaner
Quick foaming penetration. Cleans off corrosion. Neutralizes acid.
16 oz. aer. 12 per case.Part #.............CRS ABC
reD battery terminaL Protector
Seals terminals. Prevents corrosion buildup. Extends battery life.
16 oz. aer. 12 per casePart #..................CRS ABS
eLectricaL contact cLeaner
Penetrates instantly, removes dirt, oil, grease and wax. Cleans motors, switches, relays, computers. Nonflammable, nonconduc-tive. Leaves no residue.
16 oz. aer. 12 per case.Part #............CRS AEC
FueL inJection air-intake cLeaner
The first step in clean-ing fuel injected en-gines. Safely cleans computer controlled air intake systems. Will not harm protective coatings. Lubricates.
16 fl. oz. aer. 12 per case.
CRS AIC
Shop Chemicals
1021crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
Shop ChemicalsStartinG FLuiD
For gas & diesel engines. For a fast start on the coldest days. Helps start stubborn engines. Saves batteries. Contains upper cylinder lubricant. Finely dispersed diethyl ether enters the system ready for combustion even at -65ºF.
10.7 oz.Part #..........CRP M3815
bar’S LeakS raDiator StoP Leak
New and improved. America’s most trusted since 1947. Factory installed in 75% of all American made cars and trucks. Works effectively with all antifreeze.
5.5 fl. oz.Part # ................................ CRP C105
enGine brite Foamy
Used to remove grease and grime from autos, power mowers, marine and trac-tor engines, metals, concrete, tires and industrial equipment where a water rinse is permitted.
18 oz.Part # ................................CRP FEB1
Lint anD DuSt remoVer
A jet of high powered, moisture free air will blast away lint, dust, tiny fabric scraps, food crumbs, etc. from keyboards, screens, sewing and embroidery machines and other delicate surfaces and equipment. With the attached tube, pinpoint accuracy of the air is a snap.
12 oz. can # SPY 804
teFLon taPe threaD SeaLant taPe
Rolls on dry, molds into pipe threads forming a leak proof seal. Works on any line.
1/2” x 520” SFT TT50520 3/4” x 520” SFT TT75520
Leak Lock GoLD
High strength pipe joint sealer. Hot or cold. Never becomes hard or brittle. Maintains a perfect seal. Seals and is re-sistant to refrigerants, oils, water and most chemicals, both liquid and gases.
1 tub of 12, 1.33 oz. tubes Part # CRZ 10001
1022 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
Loctite GasketingPermatex® uLtra bLack® GaSket maker
For dealership warranty requirements, insures extended drivetrain warranties compliance. Fast-curing formula. Sensor safe, low odor, noncor-rosive. Meets performance specs of OE silicone gaskets. Retains high flexibility, oil resistance properties through use of patented adhesion system. Temperature range-75ºF. to 625ºF. inter-mittent; resists auto and shop fluids and vibration. Use on valve covers, oil pans, intake manifold end seals, timing covers, transmission pans. 3.35 oz. tube, carded. LOC 598BR 9.25 oz. auto. tube. LOC 598MA
Permatex® uLtra bLue® no Leak rtV SiLicone GaSket
Developed to meet today’s technology changes. Sensor-safe, low odor, noncor-rosive. Outstanding oil resistance and joint movement values. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temperature range -75ºF. to 500ºF. intermittent; resists auto and shop fluids and vibration. Use on valve covers, oil pans, timing covers, transmission pans, differential covers.
3.35 oz. tube, carded.......LOC 77BR
Permatex® uLtra coPPer® hi-temP rtV SiLicone GaSket
For 4 cylinder, turbocharged or high-perfor-mance engines. The most advanced, high temperature RTV silicone gasket avail-able. Sensor-safe, low odor, noncorrosive. Superior adhesion. Three times more oil resistant than conventional silicones; eight more flexible than cut gaskets. Temperature range -75ºF. to 700ºF. intermittent; resists auto and shop fluids and vibration. Use on: exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermo-stat housings.
3 oz. tube, carded..........LOC 101BR
Permatex® hi-temP rtV SiLicone GaSket
Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.) Replaces almost any cut gasket. Makes reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gaskets to increase reliability. Temp. range -65ºF to 500ºF intermittent; resists auto and shop fluids. First generation 1970-1980 gasket maker.
11 oz. ctg .........................LOC 81409
3 oz. tube, carded............LOC 26BR
4.5 oz. auto tube .............. LOC 26LA
Permatex® SenSor-SaFe hi-temP rtV SiLicone GaS-ket
Formulated for oxygen sensor equipped engines. Temp. range -75ºF to 650ºF intermittent; resists auto and shop fluids. First generation 1970-1980 gasket maker.
Dynatex® rtV SiLicone GaSket maker-L/VFormulated to withstand higher operating temps. Sensor safe and manufactured to meet OEM Specs. Resists cracking and migration caused by thermal cycling. Will not leak. Temp resistant up to 650ºF. Resists oil, water, antifreeze and transmis-sion fluid.
3 oz. tube, carded........... DTX 49202
Permatex uLtra Grey® GaSket maker
Designed for high torque applications (predominantly Japanese designs) requiring a unique RTV gasket. Exceeds manufacturers’ performance requirements. Low odor, non-corrosive. Outstanding oil resistance. Guaranteed not to leak. Tem-perature range -75°F to 625°F intermittent; resists auto and shop fluids and vibration. Suggested Application: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.
3.35 oz. tube, carded......LOC 82194
1023crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
Loctite® anaerobic GaSket maker oem inter-chanGe - 518Noncorrosive gasket-ing material designed primarily for use on aluminum, iron, and steel flanged mat-ing surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to 015” and cures to a solvent resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife.
50 ml. tube, carded.Part # ...............................LOC 51813
Gasketing
Permatex® the riGht StuFF
Makes reliable gaskets. A new gas-keting material that outperforms cut gaskets. Seals first time, every time. More durable. Saves money. Forms a tough, rubber gasket.
7 oz. pressurized can.
inStant GaSket
FormuLa rSInstant Gasket in 60 seconds for imports. Aerosol power can. Makes any size gasket. Seals up to 450ºF. Oxygen sensor safe. Exceeds OEM Specs. Formula RS Power Can has been formulated to perform to high torque loads created by high tech engineers. This sensor safe material seals immediately creating long lasting durable rubber gaskets. 6.7 oz. 6/Case Black MCK 0319/6 Gray MCK 0318/6
hyDrauLic Pneumatic SeaLant 545Designed for both hydraulic and pneumatic sys-tems, 545 contains no fillers or particles which could contaminate system fluids, foul valves, or clog fine filters and screens. 545 has excellent solvent resistance and a temperature range of -65°F to +300°F Applications: Used to lock and seal hydraulic and pneumatic fittings, servomechanisms, and fine-filtration systems. This Teflon-free product is specially formulated to offer lubricity for easy assembly 50 ml bottle.
Part # ...............................LOC 54531
threaDLocker 290 hiGh StrenGth WickinG GraDe
A low viscosity threadlocking liquid, 290 wicks along the threads of pre-assembled fasteners to secure them in place. Penetrates threads by capil-lary action; simplifies preventive maintenance. Use On: Preassembled fasteners, instrumentation screws, electrical connectors, carburetors.
36 ml bottle.Part # ...............................LOC 29040
Loctite threaD treatment StickS
Thread Treatment Stick products are: Convenient: small enough to be “pocket friendly. No leaks, drips or spills. Keeps toolboxes, workbenches and hands clean. Fast and easy to apply. Solid formula: great for overhead use. Functional for a full range of uses.
Kit Includes 5 Sticks. Kit Part # LOC 38725 1 of each of the following:
LOC 37700 - Loctite Red Threadlocker Stick 19gm LOC 37614 - Loctite Blue Threadlocker Stick 19gm LOC 37615 - Loctite PST Thread Sealant Stick 19gm LOC 37616 - Loctite Copper Anti-Seize Stick 20gm LOC 37617 - Loctite Silver Anti-Seize Stick 20gm
1024 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
ThreadlockingLoctite® remoVabLe StrenGth threaD-Locker bLue
OEM specified as 242®. All-purpose medium strength threadlocker. Ideal for all nut and bolt applications 1/4” or larger. Eliminates need for stock-ing expensive lock nuts and lockwashers. Locks and seals while prevent-ing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.
6 ml. tube, carded. .........LOC 24200
36 ml. bottle, carded. .....LOC 24240
Loctite® hiGh StrenGth threaDLocker reD
OEM specified as 271®. High strength threadlocker for heavy-duty applica-tions. Especially well-suited for permanently locking studs and press fits. Adds 3000 PSI holding power on slip and press fit as-semblies. Replaces set screws and snap rings. Locks against vibration loosening. Requires extra effort or special tools for removal.
6 ml. tube, carded. .........LOC 27100
36 ml. bottle, carded. .....LOC 27140
Loctite® LarGe Diameter threaDLocker reD
A high strength adhesive for locking and sealing large bolts and studs 1” or larger in diam-eter. Heat may be required to weaken bond before parts can be disassembled. OEM Speci-fied as 277. This product is on a Ford Motor Company Technical Service Bulletin, stating to use this product only in the repair.
50 ml bottle LOC 27731
Permatex® threaD SeaL-ant With teFLon®Economical general purpose fitting sealant. Outperforms tapes and pipe dopes. Seals and resists pressure in air, oil, diesel fuel and hydraulic systems. Remains pli-able at higher and lower temps. Temp. range -65ºF to 300ºF, resists common shop fluids.
1 oz. tube, carded............LOC 14AR .
16 oz. can ........................... LOC 14D
Loctite® PSt® PiPe SeaL-ant W/teFLon® hiGh temPerature
OEM specified as 592. Locks and seals threaded fittings. Resists leakage, vibration loosening, moisture, hydraulic fluids and diesel fuels. Lubricants threads for easy assembly and disassembly. Won’t shred or wear like Teflon® tape. Parts may be repositioned up to 24 hours after application. Suited for temps up to 400ºF.
6 ml tube, carded ...........LOC 59214
50 ml tube, carded. ........LOC 59235
250 ml tube .....................LOC 59241 .
Loctite® hiGh temPera-ture threaDLocker reDOEM specified as 272. Hi-temp/hi-strength threadlocker for heavy duty applications. Prevents bolts and press fits 3/8” to 1” from loosen-ing due to shock, severe vibration and heat stress. Exclusive formulation for newer engines and high per-formance applications that require extreme temp. resistance. Suited for temps up to 450ºF. Removable with heat and hand tools.
10 ml bottle, carded. ......LOC 27200
50 ml bottle .....................LOC 27240 .
Loctite® PSt® PiPe SeaL-ant W/teFLon® hiGh PerFormance
OEM specified as 565. Formulated specifically for metal, tapered pipe thread fittings. Replaces Teflon tape or pipe dopes. Cures rapidly to withstand 10,000 PSI. Perfect as a replacement for Vibra-Seal® ore-coated parts. Prevents galling and protects mated threaded areas from rust and corrosion. PST 565 is certified to ANSI/NSF Standard 61 for use in potable water systems.
50 ml tube, carded. ........LOC 56521
.
1025crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
brake cLeaner
Quickly removes brake fluid, dirt, grease and oil. Dries fast. Leaves no residue. Nonflammable. 12/case.
24 fl. oz. aer........CRS ABK
20 fl. oz. aer.........CRS AKB
x-100 SiLicone PaSte
Preserves brake hoses and dust boots. Prevents rubber from drying and cracking. Lubricates, stops squeaking and sticking of rubber parts. Prevents freezing. Protects from -70ºF. to -420ºF. Brush-Cap.
8 oz. can ............................ CRS BSP
brake Quiet
Silences noisy disc or drum brakes. Eliminates squeaks and squeals. Not oily or greasy.
8 oz. bottle..........CRS BBQ
Heavy Duty. Brush-Cap.8 oz. can.....CRS BBQHD
brake Lube
Copper lube for caliper, backing plate & brake shoe metal-to-metal contact points. Excellent for starter drives. Anti-seize for bolts, studs. Hi-tempera-ture resistance up to 1100ºF. Perma-nent lubrication. Resists moisture, salt. Brush-Cap.
10 oz. can CRS BCL
the SiLencer PreVentS brake noiSe
OEM approved. Brake finishing treatment. A revolutionary for-mulation that eliminates brake noise. Stops squeaking before it starts. Reduces customer comebacks. No drying time re-quired. Benefits last for 10,000 miles, or one year of driving.
9 oz. aer.Part #..................... BOW 941
Brake Productsbrake PartS cLeaner
This highly concentrated solvent blend pro-vides maximum performance in a brake parts cleaner without the use of ozone depleting chlorinated solvents. Powerful blasting spray easily removes brake fluid, grease, oily dirt and contaminants from linings, pads and drums, cylinders and springs without disassembling the brake unit.
20 oz. aer........................... CRS ABP
5 Gallon ......................... .CRS BBP5
16 Gallon ....................... CRS BBP16
55 Gallon ...................... CRS BBP55
* Blasts away deposits * No chlorinated or fluorinated solvents * No fouled waste oil * Removes brake fluid, grease and oil * Contains no lead, phosphorous or silicone
1026 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
Permatex® DiSc brake Quiet - aeroSoL
Prevents brake squeal by dampening vibration at caliper/brake pad interface. 12/case.
12 oz. aer. LOC 127MA
Permatex® DiSc brake Quiet
Stops brake squeal by dampening vibration at caliper/brake pad interface. Provides tighter fit and allows for easier disassembly. Protects against corro-sion. Compatible with new anti-lock brake systems. 12/case.
4 fl. oz. can....................... LOC 126H
4 fl. oz. bottle. ................LOC 126HB
Dynatex DiSc brake Quiet
Reduces vibration at caliper/brake pad interface to eliminate brake squeal. Resists diesel fuel, ethylene glycol, water, grease and brake fluid. 12 per case.
12 oz. Aerosol...DYN 49662
Brake ProductsDynatex brake FLuiD Dot 3Recommended for all types of automotive brake systems, drum and disc brakes. Pro-tects metal and rubber parts against wear and corrosion. Exceeds 450ºF boiling point for DOT-3 brake fluid. Exceeds SAE Spec J1703, Fed Spec W-B-680 and conforms to Federal Motor Vehicle Safety Standard 116 for DOT 3 brake fluid. Cam be mixed with all brake fluids approved by car, tractor, truck and bus manufacturers (excluding Citreon). 4/case.
Gallon ..............................DYN 56128
1027crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
tracer-Stick™ caPSuLe Starter PackS
R-12, R-22 and R-502/Mineral Oil Systems. 6-0.03 oz. TP-3850 Tracer-Stick™ capsules, 2 TP-3851 control valves and 1 TP-9941 whip hose. Mineral Oil Systems SPE 3853
R-134a/PAG Systems. 6-0.06 oz. TP-3860 Tracer-Stick™ capsules, 2 TP-3861 control valves and 1 TP-9942 whip hose. Pag Systems SPE 3863
Dye Lite® aLL-in-one™ FuLL-SPectrum Dye
1 oz. bottles marked in 1/4 oz. increments for easy pour and measure. 6 per case.
Application Part # All Oil and Oil-Based Fluids SPE 3400
tracer-Stick™ caPSuLeS For mobiLe a/c anD reFriGeration SyStemS
Disposable capsules are prefilled with measured doses of Fluoro-Lite® fluorescent dye. Prevents messy spills. 6-0.03 oz. capsules.
Mineral Oil Systems SPE 3850 Pag Systems SPE 3860
Both Packed 6-0.03 oz. capsules per box. For sys-tems with up to 2.9 pounds of refrigerant.
Leak Detection
FLuoro-Lite®
R-134A, Pag Systems SPE 3820
R-12, R-22 and R-502 & Mineral Oil Systems SPE 3830
Oil, Fuel, Automatic Transmission, Power Steering, Hydraulics Dye-Lite tracer dyes enable you to pinpoint all fluid leaks (except brake fluid) without steam cleaning engines or transmissions. Faster leak detection cuts your labor costs and means more repairs, greater customer satisfaction and higher profits for you. Since Dye-Lite tracer dyes are compatible with the host fluids, no fluid changes are necessary. This makes preventive maintenance easy. Because the dye re-mains safely in the system, repairs can be confidence-checked with the inspection lamp to prevent no-charge reworks and any future leaks will be found instantly.
Dye Lite® aPPLication-SPeciFic DyeS
Application Part # Gasoline Engine Oil SPE 3090 Diesel Engine Oil SPE 3100 Automatic Transmission & Power Steering SPE 3200 Engine Coolant System SPE 3900 Fuel System (Gasoline or Diesel) SPE 3700
1 oz. bottles marked in 1/4 oz. increments for easy pour and measure. 6 per case
6- 1 oz. bottles of fluorescent dye.
1028 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
SuPer SeaL
Quest Auto Air Conditioner Super Seal has one tube that seals leaks in metal parts and a second that seals leaks in connecting rubber parts. It also contains a red dye that pinpoints larger leaks. Larger leaks where the refrigerant charge is lost within two weeks may need to be manually repaired.
The red tube contains a moisture activated chemical formulation that remains a fluid until it is polymerized by moisture and solidifies to form a scrub or patch. Pressure, heat and the absence of significant moisture inside the air conditioner prevent the fluid from polymerizing until it leaks out of the air conditioner. As the refrigerant leaks out, it chills the air, creating moisture. This moisture activates the chemicals to form a patch. This patch seals leaks in the condenser, evaporator, accumulator and compressor.
The black tube contains conditioners and sealers that penetrate and rejuvenate o-rings, gas-kets, and other rubber connectors to prevent leakage. It also adds a drying agent to eliminate any moisture in the system, and a red dye to mark larger leaks.
For Pre-1995 cars using R-12 and R-22 air conditioners under 4 tonsPart # .................................. QAC 251
For all R-134a air conditionersPart # .................................. QAC 250
A/C auto air conDitioner conVerSion kit. conVertS r-12 air conDitioner to r-134a
Converting an air conditioner to R-134a requires first, the removal of the R-12, second the addition of a Pag lubricant, and third new fittings that will accept R-134a. This conversion kit enables anyone to add the Pag lubricant and fittings without exposing the air conditioner to the atmosphere.
R-12 to R-134a Conversion Kit Mechanic QAC 402M Flex Tube - 7/16” Low Side Fittings QAC 415
7/16” Low Side R-134a Conversion Valve QAC 440 3/8” High Side R-134a Conversion Valve QAC 4427/16” High Side R-134a Conversion Valve QAC 444
Low Side Protective Cap QAC 446High Side Protective Cap QAC 447
a/c “o” rinGS kitS
Sold in a clear, plastic 18 hole box with a lid. 18 different sizes and 345 pieces. For original air conditioning systems. Not for use with R-134a refrigerant.
Air Conditioning “O” Rings CRA 118 Nitrile Air Conditioning “O” Rings. For use with R-134a refrigerant. 150 different sizes and 135 pieces. CRA 120
PaG r-134a reFriGerant Lubricant
Refrigerant lubricant for R-134a A/C systems. 12 fl. oz. 12/case.
Universal A/C PAG Oil CRZ PAG
reFriGeration oiL
Recommended for Automotive Air Conditioning Compressors using refrigerant R-12.
One Quart CRZ 59000
air conDitioner oDor treatment
Air conditioner odor and heater treatment. Destroys fungus.
13 oz. 12/Case CRS ACOTBP
1029crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
PaPer FLoor matS
Protect carpets from soil and grease. Put down a fresh mat for delivery to show customers you care about their car. Paper, 15” x 18”, 250 Mats/Box MAR 30203
White non-SLiP PLaStic FLoor matS
16” x 20” 500 Mats Roll/Disp Box CRS 1720
Premium h/D PaPer FLoor matS
Protect carpets from soil and grease. Put down a fresh mat for delivery to show customers you care about their car. With #1 Goal imprint. 500/Case CPP FMCIS
Floor Mats
norton bLue WraP FLoor matS
Impervious to water, grease and chemicals. Will not slip or tear. Generous size 16-1/2” x 21”. 125/Roll NOR 05923
Service SuppliesWork ticket hoLDer
12” x 13” Plastic ticket holder with clear front and black vinyl backing. Has an eyelet and a handle.
25/Pkg CRZ 42222
1030 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
Seat Covers
SLiP ‘n GriP Seat coVerS
These durable, slip-resistant, inexpensive seat covers are the best defense against dirt, grease and paint on car seats. The special 2-ply “slip and grip” plastic grips the seat while allowing you to slide easily. A large pocket and generous length covers highback bucket seats easily. Resist tears, tool punctures, splitting, and stretching, and they’re perfect for fabric, leather and vinyl seats. They are supplied in a handy dispenser box. Part # Description CRS SNG125 Seat Covers,125/Box
SteerinG WheeL coVer
The double pocket design covers the entire steering wheel, including the horn, and prevents grease and paint from transfer to steering wheel.
250/Box MAR 30201
PLaStic ProtectiVe Seat coVer
Self Adhering. Protects vehicle seats from dust, dirt, overspray and other contaminants during refinish repair in body shops and garages. Performance benefits: Quick installation. Easy to handle, lightweight 24” wide roll. Perforated every 48” along roll length for easy tear off ap-plication after covering seat. Self adhering, stay in place protection during maneuvering and getting in and out of vehicle. No adhesive transfer. For inside use only. It Stays In Place. Part # Description Size RBL 436 Cloth Seats 24 inches x 100’ Roll perforated every 48 inches along length (.61m x 30.5m)
RBL 437 Leather Seats 24 inches x 100’ Roll perforated every 48 inches along length (.61m x 30.5m)
norton bLue WraP Protec-tiVe Seat coVer
Full coverage from headrest to floor. Will not slip or bunch up. Protects seat from grease, dust & chemicals. Dispenses eas-ily from perforated roll. Unique two-layer, co-extruded product that allows the bottom layer to grip the seat and the top layer al-lows technician to easily slide in and out of vehicle.
125/Roll NOR 05921
1031crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
LiFt Drain
5 gallon capacity. Heavy duty galvanized steel with rugged epoxy finish. Telescoping sliding tube adjusts overall height from 40” to 67”. Thumb screw adjustment. Large 12” diameter funnel helps pre-vent spills. Lower container has a 3-3/4” pour spout for fast emptying and closure cap.
Part # ............................PLW 75837
tranSmiSSion Pan aDaPtor For LiFt Drain
Rests easily on top of Lift Drain and other com-mon lift drains. Helps prevent oil spillage. Rugged corrosion resistant epoxy finished galvanized steel. 21”dia.
Part # ............................PLW 75836
LiFt Drain DoLLy
Lift Drain Dolly for use with 75837. Rugged steel construction. Four cast-ers with hard neoprene wheels.
Part # ...................PLW 75838
Quick - StraP StraPPinG kit
From pallets to packages, Quick Strap is the answer to a fast, efficient replacement for metal strapping, rope, tape, etc. Each kit includes 3000 ft. strong, 250 lb. hi-tensil 1/2” polypropylene strapping, 300 buckles and a simple to use tension/cutting tool. Dispenser box keeps mate-rial organized. Economically priced and reusable for even more savings.
Description Part #Kit TOL PP1 100 Extra Buckles TOL PPC2 Tension/Cutting Tool TOL PPT
inSPection ScraPerS
All Purpose Part # PLW 72431 Long Handle Part # TOL ATD8549
kneeLinG PaD
Part # CRS CFC
Service Dept.
raDiator Drain Pan
6 gallon capacity. Heavy duty galvanized steel. Pouring with anti-splash baffle prevents spilling. Rolled smooth edge and ribbed bot-tom for heavy duty strength. Includes handles. 19” diameter x 6” high.
Part # ....................PLW 75750
raDiator FLuSh teeS
Size Part # 3/4” CRZ UC34T 5/8” CRZ UC58T 1/2” CRZ UC12T
PLaStic Drain Pan
5 gallon capacity. Tough poly-ethylene construction that won’t rust, dent or scratch. Pour-ing spout and handle allows for ease of carrying while full. Handle can also be used to push pan under vehicle. Easy to clean. Part # PLW 75762
DiFFerent Lock boLt extractor kit
Part # CBT EXT1191
1032 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
SiLencer banDS
Part # OEM# Description SHK 68B Shark N/A Ammco Type Neoprene Rotor Silencer FMC 90984
SHK 69 Ammco 6920 Ammco Type Natural Rubber Rotor Silencer Performance 8576 Van Norman 111485
SHK 70B Andrews M-3 Chatter Depressing, Chip Deflecting Clamping Silencer. Accu-turn 434296 FMC 90198 Performance 8572
SHK 80B Ammco 5280 Drum Silencer for Passenger Cars. Natural Rubber. FMC 90988 Performance 8574 Van Norman 866542
SHK 83B-2 Ammco 9183 Replacement Silencer Pads - 4 Pack
SHK 94 Ammco 6922 Large Neoprene Rubber Gasket Type Silencer For Solid Foreign Car Rotors. Accu-turn 434061 9” Diameter. FMC 90194 Performance 6922 Reis 11488
SHK 96 Ammco 6921 Small Neoprene Rubber Gasket Type Silencer For Solid Foreign Car Rotors. Accu-turn 433789 6-1/2” Diameter. FMC 90196 Performance 6921 Reis 11482
SHK 980 Ammco 9800 Spring Type Silencer Band
Silencer Bands
1033crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
FMC/JOHN BEAN/BARRETT Positive Rake Carbide Bits with .020” Radius. Models 67BSD, 67DLX, 67GSA, 69DLX, 701ECF and 601PF. Models 400, 500, 600 or 700 FMC or Barrett Brake Lathes.
carbiDe bitS For brake LatheS
Part # Qty OEM# Description
SHK 06010 10 Pk. Accutrim 433796 Combination Disc/Drum Lathe for Discs. Model 8911, 8922, 8944, or 8989. SHK 062C-6 6 Pk. Ammco 6914-6 SHK 062-10 10 Pk. Ammco 6914-10
SHK 0636 6 Pk. Ammco N/A Economy unground carbide bit. For use on same above listed lathes.
SHK 4076 6 Pk. FMC N/A SHK 40710 10 Pk. FMC 90488
Most popular Ammco Negative Rake Bit with center hold and 12 cutting edges. Models: 1000, 1001, 3000, 3850, 4000, 4100, 7000, 7700 and on-vehicle Brake Lathe 710.
Carbide Bits for Brake Lathes
3m™ roLoc™ brake rotor SurFacinG DiScS
A premium 120 grit disc designed to create a non-directional scratch pattern on brake rotor surfaces after turning. Starter pack: Includes nine 3” Discs and 1 rolock disc pad. Part # MMM 1410 Refill Pack: Includes 12 3” Discs. Part # MMM 1411
carbiDe inSertS For brake LatheS
Part # CBT CT10
1034 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
Tire Valves and Caps“SnaP-in’ tubeLeSS tire VaLVeS
Fits all tubeless tire rims. Special ozone resistant rub-ber compound prevents premature deterioration due to compression and hot or cold conditions. Free floating insert and tapering end give “ball-and-socket” action. Complete with cap and core. Maximum inflation pres-sure: 60 PSI. Do not use on rims that exceed .156 thickness.
CaseLength TR # Qty Part #For .453” Rim Holes1-1/4” 413 50 TRU 474141-1/2” 414 50 TRU 474212” 418 50 TRU 474262-1/2” 423 50 TRU 47431
For .625” Rim Holes1-1/4” 415 50 TRU 474022” 425 50 TRU 47406
tire VaLVe extenSionS
Extend valve length for total servicing through wheel covers. Inflate, deflate, pressure check. No removal required. Plastic extensions. Double as valve cap. 50/case.
3/4” TRU 473021-1/4” TRU 473061-1/2” TRU 47309
chrome VaLVe SLeeVeS
Get a custom design sports wheel appearance to your existing valve stem. No tools needed. Simply slide chrome sleeve over valve stem. Complete with chrome hex caps. 4 per card.
Fits all 1-1/4” and 1-1/2” length valves. TRU 47459
tire VaLVe coreS
Short tire valve cores. (TR C-1). Fit all standard tire valves. Provide an airtight seal. Meets all Federal specifications. Long life spring. (.206 - 36 UN).
100 per case. TRU 47201
chrome “SnaP-in” tubeLeSS tire VaLVeS
Distinctive, bright, chrome plated sleeve and hex nut design used to dress up fancy wheels or wheel covers. Designed for passenger cars requiring high pressures. Maximum inflation pressure: 60 PSI. 2 per card.
1-1/4” 413 TRU 47455
tire VaLVe caPS
Protective secondary seal to help pre-vent leakage, and stops dirt and other objects from damaging cores.
Plastic Dome Type Caps (TR VC-8). Original equipment replacement cap. Economical, weatherproof. 100/box.
Part # ...............................TRU 47107
Metal Dome Type Caps (TR VC-3). Long skirt covers entire valve thread, prevents damage. Complete with airtight rubber gasket seal. 100/box.
Part # ...............................TRU 47109
Custom Hex Valve Caps. Creates that distinctive sports wheel appearance. Designed for heat applications. Custom chrome plated hex nut tightens or loos-ens easily with wrench. Fits all standard chrome sleeves and metal “clamp-in” valves. Includes rubber gasket seal. 100/box.
Part # ............................... TRU 47112
tire rePair tooLS
Tubeless Tire Valve Insert Tool. Install and remove all size “snap-in” type tubeless tire valves in all size rim holes. Heavy duty, all steel construc-tion. Chrome plated to resist corro-sion. Features a deep threaded head for ease of valve stem attachments, and notched handle for a sure grip and proper alignment.
Part #................TRU 47056
1035crestmidwest.com • Crest Industries, Inc. Section 30 - Parts and Service
Kex Tire RepairJiFFy PatcheS
General purpose rubber patches for repairing damaged tubes and sealing punctured passenger tire innerliners. To prevent rusting of the steel belts, puncture injuries should be filled with inserts, plugs or putty materials to seal out moisture and dirt.
1-1/4 Mini Round KEX 0001-5/8 Small Round KEX 0012-1/4 Med. Round KEX 0023-1/8 Lg. Round KEX 003
Patch-n-PLuGS
These all rubber Patch-n-Plugs are recommended for radial and bias ply passenger car tires. The all-rubber contruction provides maximum flex-ibility and easy installation. They can be installed in the crown, shoulder or sidewall areas.
1/8” Small Round Stem KEX 3811/4” Med. Round Stem KEX 3827/16” Small Flat Stem KEX 386
raDiaL VaLue PatcheS
Rectangular shaped patches are reinforced with nylon flocking for added strength and resistance to dimpling. These are our most popular radial puncture repair patches. 10/box.
Small 1-3/4 x 3 KEX 413Med. 2-1/4 x 4 KEX 414Large 2-1/2 x 5-1/2 KEX 415
rounD thick hiGh tenSiLe rubber raDiaL PatcheS
Extra thick rubber patches provide flex-ibility and nondirectional reinforcement for puncture injuries in radial and bias ply passenger tires. “Radial” identifi-cation is printed on the protective top cover.
Freezer PacksMed. 2-1/4 KEX 5102 45/boxLarge 3-1/8 KEX 5103 30/box
uniVerSaL PatcheS
Round shaped patches are centrally reinforced with nylon tire cord. De-signed for radial crown and bias ply puncture repairs.
Small 2-1/4 KEX 420 20/boxMed. 3 KEX 421 10/boxLg. 3-5/8 KEX 422 10/box
StrinG tyPe rePair
Use with Inserting Needles. For use on steel belted and bias ply tires. Use to seal hole punctures in thread of all tubeless tires.
Heavy Duty 7” Repair String. 50/box.Part # ............................... TRU 46110
Heavy Duty 7” Truck Repair String. 50/box.
Part # ............................... TRU 46112
tire PreSSure GauGeS
Standard Tire Gauge. 10 to 50 lbs. Use for passenger cars, vans and light trucks. Calibrated 2 sides 10-50 PSI in 1 lb. units and 70-350 kPa in 10 kPa units.
Part # ...............................TRU 17509
1036 Crest Industries, Inc. • 1.800.733.2737 Section 30 - Parts and Service
JiFFy Gun
Heavy duty stamped steel design features a push button plunger release. The gun shoots 5/16” & 3/8” mushroom plugs.
Description Part #Magicure Plug & Tip (5/16”) 25/box. KEX 213Magicure Plug & Tip (3/8”) 15/box KEX 214Posi-Grip Plug & Tip (5/16”) 25/box. KEX 234Posi-Grip Plug & Tip (3/8”) 15/box. KEX 239Jiffy Gun (Nozzles Included) KEX 241Small Replacement Nozzle KEX 922Large Replacement Nozzle KEX 923
Kex Tire RepairVuLca StriP
May be used as a filler with a patch, as well as an on-the-wheel emergency repair.
Regular 2-1/2” x 1/4”, 50/box.
Part # KEX 311Large 2-1/2” x 1/2”, 25/box.
Part # KEX 312
maGicure PLi-SeaL
Designed for small holes and breaks. May be used on all tube-less tires
Regular 2-1/4” x 1/4”, 50/box.Part # KEX 331
Large 3-1/8” x 1/2”, 25/box.Part # KEX 332
PoSi-corD StrinG
Rubber impregnated for vulcanization. Use on steel-belted radial tires.
Description Part #Fat Brown String 4”, 50/box. KEX 361Fat Brown String 8”, 25/box. KEX 362Narrow Black String 7”, 50/box. KEX 370
kex PerFicure cement Description Part #Flammable Chemical Cement 8 oz. KEX 511 Nonflammable Chemical Cement 8 oz KEX 513NF Nonflammable Chemical Cement 32 oz KEX 514NF
chemicaLS
Buffing Solution 32 oz. KEX 490NFBead Sealer 32 oz. KEX 507 Tire Lubricant 1 gallon. KEX 81501Applicator Swab KEX 81556
hanD tooLS
Ball Bearing Stitcher 1-1/2 x 1/16”Part # ...................................KEX 914
Injury ProbePart # ...................................KEX 966
T-Handled Spiral Cementing ToolPart # ...................................KEX 902
4-In-1 On-The-Wheel Repair ToolPart # ...................................KEX 925
Metal T-Handled Open-Eye NeedlePart # ...................................KEX 928
Replacement Needle for 928Part # ...................................KEX 931