SECTION 11 AIRLESS SPRAY SYSTEMS...GRACO NXT & KING XTREME PUMP LOWER 180cc WITH BUILT-IN FILTER 302) LL180C2 X70 & KING 68:1 Pump Lower with Built-in Filter (1) Note: All part numbers

SECTION 11 AIRLESS SPRAY SYSTEMS

Technical Reference Manual © Blastrite 2010 Section 11 - Page 1

GRACO NXT XTREME SPRAYER – HEAVY DUTY CART (complete as per drawing)

02) 287884 Cart Heavy Duty (1) 03) 197682 Suction Tube (1) 04) 247301 1inch x 6 foot Suction Hose, NPT x Q Connect (1) 05) 116401 Elbow Adaptor (1) 06) 116402 Quick Connect Adaptor (1) 07) 244524 Ground Wire with Clamp (1) 10) 181072 Inlet Strainer (1) 101) XTR704 XTR-7 Gun with Tip 519 (1) 102) H42506 X25-X45 Nylon Hose 1/4inch x 6 foot (1) H52506 X46-X55 Nylon Hose 1/4inch x 6 foot (1) H72506 X60- X90 Nylon Hose 1/4inch x 6 foot (1) 103) H43850 X25-X45 Nylon Hose 3/8inch x 50 foot (1) H53850 X46-X55 Nylon Hose 3/8inch x 50 foot (1) H73850 X60-X90 Nylon Hose 3/8inch x 50 foot (1) 104) 164856 Reducing Nipple, 3/8 x ¼ (1) 108) 162505 Union Swivel Fitting, 1/2F x 3/8M (1) 302) LL290C2 X45 Pump Lower with Built-in Filter (1) LL220C2 X60 Pump Lower with Built-in Filter (1) LL180C2 X70 Pump Lower with Built-in Filter (1) LL145C2 X90 Pump Lower with Built-in Filter (1) 303) N65DTO NXT 6500 Air Motor with Data Trak (1) N65DNO NXT 6500 Air Motor without Data Trak (1) All items are included in Complete Sprayer Package Note: All part numbers start with EQP–SP – Therefore SAGE reference to Part no. 287884 is EQP-SP-287884

PART.NR. MODEL DESCRIPTION


GRACO NXT AIR MOTOR

303) N65DTO NXT6500 Air Motor with Data Trak (1) N65DNO NXT6500 Air Motor without Data Trak (1)

PART.NR. MODEL DESCRIPTION QTY

Ref. No. Part No. Description Qty. 2 NXT604 CYLINDER 1 3 NXT602 COVER, bottom 1

4 NXT601 PISTON ASSEMBLY; includes Item 10 1

7* 161562 PACKING, V-block; nitrile 1

8* 15H610 PACKING, backup; leather 2 9* 15F453 RING, retaining 1

10 NXT106 BUMPER, piston; includes magnet 1

12 NXT100 POPPET; includes items 12a-12d 2

12a . O-RING; buna-N 1 12b NXT101 . O-RING; buna-N 1 12c . O-RING; backup; buna-N 1 12d . O-RING; buna-N 1

13 119050 BOLT, hex hd; 1/2-13 x 8 in. (203mm) 4

14 15F639 NUT, with lockwasher; 1/2-13 4 15 NXT603 MUFFLER 1 17* 102727 O-RING, piston; nitrile 1

Ref. No. Part No. Description Qty 18* 15F448 O-RING, end cap; nitrile 2 20 119990 O-RING; buna-N 1 21 15F931 RING, lift 1 41 120088 SCREW; 3/8-16 x 4 in. (101mm) 4

43 120091 SCREW; thread forming; 1/4-20 x 2 in. (51mm) 4

44 120092 SCREW, thread forming; 1/4-20 x 2-1/2 in. (63mm) 2

46* 253476 GASKET 1 47 287844 COVER, valve, outer 1 51 15F674 LABEL, safety 1 52 15F973 LABEL, safety 1 58 120206 MUFFLER, poppet 2 59 277366 BUMPER 1 60 116343 SCREW, ground; M5 x 0.8 1 61 111307 WASHER, lock; 5mm 1 62 NXT112 KNOB, de-ice 1

Replacement Danger and Warning labels, tags and cards are available at no cost. * Parts included in Repair Kit NXT600 (purchase separately).

Part included in Low Noise Exhaust Conversion Kit NXT111 (purchase separately).

Note: All part numbers start with EQP–SP – Therefore SAGE reference to Part no. N65DTO is EQP-SP-N65DTO

Ref. No. Description Air Motor Part Numbers Qty N65DN0 N65DT0 1 CAP, top 15F465 15F465 1 22 KIT, de-ice exhaust, includes items 20, 25, 44, 56

and 57 NXT110 NXT110 1

23 KIT, remote exhaust; includes items 20, 44 1 24 KIT, low noise exhaust; includes items 20, 22, 25,

44, 54, 55, 56, 57 1

25 SCREW, machine, hex hd; 1/4-20 x 1 in. (25mm) 120730 120730 2 30 COVER, top 15F877 15G574 1 33 ADAPTER, lift ring 1 35 SENSOR ASSEMBLY 1 36 GUIDE, strain relief 1 40 AIR VALVE ASSEMBLY; see page 35 NXT107 NXT108 1 45 SCREW, thread-forming; 1/4-20 x 1/2 in. (13mm) 107257 1 107257 3 4 54 DEFLECTOR 1 55 SCREW, thread-forming; 4-40 x 3/8 in. (10mm) 2 56 SEAL, exhaust 15H190 15H190 1 57 O-RING; buna-N 111151 111151 1 63 DIFFUSER, exhaust 1



GRACO NXT AIR VALVE

40) NXT107 Bare Air Valve (1) NXT108 Bare Air Valve with Data Trak (1)

Note: All part numbers start with EQP–SP –

Therefore SAGE reference to Part no. NXT107 is EQP-SP-NXT107

Ref. No. Part No. Description Qty

101 277077 COVER, exhaust 1 102 †‡ 15H633 GASKET, exhaust cover 1 103 15H394 BODY, valve 1 104 †‡ 15F435 SEAL, plate, valve; nitrile 1 105 ‡ 15F438 PLATE, valve 1 106 †‡ 15H634 GASKET, carriage cover 1 107 ‡ 15G055 CARRIAGE, detent 1 108 ‡ NXT138 CARRIAGE, air cup 1 109 ‡ NXT140 SLEEVE, cylinder; with o-ring 2 110 NXT141 STOP, valve piston; with o-ring 2 111 15F440 PIN, end cap retainer 2 112 15G865 COVER, valve 1 113 ‡ NXT137 DETENT, spring-loaded 1 117 15G905 RETAINER, valve plate 4 118 SCREW, cap, hex hd;

3/8-16 x 4 in. (102mm) 1

119 NXT142 WASHER, belleville 6 120 WASHER, flat, hardened 2 121 NUT, lock; 3/8-16 1 123 120089 SCREW, 3/8-16 x 1-3/4 in.

(44mm) 4

124 120730 SCREW, machine, hex washer hd; 1/4-20 x 1 in. (25mm); NXT108 and NXT109

11

120730 SCREW, machine, hex washer hd; 1/4-20 x 1 in. (25mm); NXT107

10

127 †‡ 113249 PACKING, u-cap; nitrile 2 128 †‡ 107563 O-RING; fluoroelastomer 2 129 ‡ 15H047 PISTON, valve, bolted 2 130 ‡ 15H048 TUBE, valve, bolted 1

Ref. No.

Part No. Description Qty

131 NXT402 MODULE, Data Trak; includes items 131a and 135; NXT108only

1

131a NXT413 . FUSE; 250 mA; NXT108 only 1 132 NXT401 HOUSING, Data Trak; includes

items 134 and 135; NXT108 only

1

133 NXT411 JUNCTION BOX ASSEMBLY; includes items 134 and 136; NXT109 only

1

134 107257 SCREW, thread forming; 1/4-20 x 1/2 in. (13mm); NXT108 and NXT109 only

2

135 120279 SCREW, thread forming; # 6 x 5/8 in. (16mm); NXT108 only

2

136 15G225 GROMMET; junction box; NXT109 only

1

138 15G790 CLIP, solenoid 1 139 NXT404 SENSOR, reed switch; includes

items 144 and 124 (qty 1); NXT108 and NXT109 only

1

140 NXT403 SOLENOID; 7 Vdc; includes items 138 and 124 (qty 2); NXT108 only

1

277355 PLUG, solenoid port; NXT107 and NXT109 only

1

142 †‡

104130 O-RING; buna-N; NXT107 and NXT109 only

1

144 156454 O-RING; buna-N; NXT108 and NXT109 only

1

145 NXT102 CONTROL, de-icing; with knob and o-ring

1

147 15G722 CARD, diagnostic, multilingual; NXT108 only

1

† Parts included in Air Valve Seal Repair Kit NXT135 (purchase separately).

‡ Parts included in Air Valve Rebuild Kit NXT136 (purchase separately)


GRACO KING AIR MOTOR

207647 SERIES L King Air Motor (1)


Note: All part numbers start with EQP–SP – Therefore SAGE reference to Part no. 207647 is EQP-SP-207647


1 180952 RING, lift 1 2 207648 UNION, 90° adapter; 3/4

npt(m) 3/4 npsm (f) swivel 1

3 113161 SCREW, hex hd flange; 1/4-20 x 1/2 in. Long

8

5 168188 SHIELD, air motor 1 7 101713 SCREW, hex hd cap; 7/16-

14 x 3-1/2 in. 4

8 100052 LOCKWASHER, spring: 7/16 in.

4

9 161587 RETAINER, detent spring 2 10 161589 SPRING, compression 2 11 161588 GUIDE, spring 2 12 169583 PLUNGER, detent 2 13 169585 ROLLER, axle 2 14 177664 HOUSING , detent 1 15 161577 PAD, rubber 2 16 161576 WASHER, flat 2 17 161586 NUT, trip rod; 3/8-24 1 18 100133 LOCKWASHER, spring;

3/8 in. 5

19 100101 SCREW, hex hd cap; 3/8-16 x 1 in. Long

4

20 102726 PLUG, pipe; socket hd; 3/4 npt

1

21 168187 MANIFOLD, air 2 22 * 168183 GASKET, air manifold 2 23 168184 SEAL, valve plate; buna-N 2 24 169584 PLATE, valve 2 25 168182 VALVE, air director 2 26 101716 SCREW, flat hd machine;

no. 10-24 x 1/2 in. Long 8

27 * 156698 O-RING; buna-N 2 28 161575 SPRING, compression 2 29 16155 HOUSING, air valve 1 30 1615 GROMMET 1 31 161590 HUB, valve housing 1 32 204649 BEARING, trip rod 1 33 150647 GASKET 1


GRACO NXT & KING XTREME PUMP LOWER 145cc WITH BUILT-IN FILTER

302) LL145C2 X90 & KING 80:1 Pump Lower with Built-in Filter (1)


Note: All part numbers start with EQP–SP – Therefore SAGE reference to Part no. LL145C2 is EQP-SP-LL145C2

145cc Lowers Models L145C1, L145C2, L145C3, L145C4, L14AC1

Ref. No.


23 † STRAINER, 60 mesh screen 224459 Pack of 2 238438 Pack of 25 24 † 186075 SUPPORT, filter 1 25* 244890 O-RING; PTFE, bottom cylin-

der (pack of 10)

26 † 197339 CAP, filter, bottom 1 27 244890 O-RING; PTFE, (pack of 10) 28*† 244896 O-RING; PTFE, filter bottom,

blue (pack of 10)

30 172479 TAG, warning 1 35* 244863 V-Packing, UHMWPE (Pack of

10)

38 † 158491 FITTING, nipple 2 39 † 244517 PLUG, packless, 0.5 in. 1 40 † 245143 VALVE, pressure, dump 1 41 † 116746 FITTING, barbed, plated 1 42 † 116750 TUBE, nylon 1 49 PLUG, pipe 101754 Models L145C1, L145C3 1

198292 Models L145C2, L145C4 1 Replacement Danger and Warning labels, tags and

cards are available at no cost. † For models L145C2 and L145C4 only. Not Shown * Parts included in packing kit (purchase separately).

See Packing Kits.


1 15J093 ROD, displacement 1 2 197330 NUT, packing 1 3 * 244881 GLAND, male (pack of 4) 4 * 244857 V-PACKING, PTFE

(pack of 10)

5 * 244869 V-PACKING, leather (pack of 10)

6 * 244875 GLAND, female (pack of 4)

7 197325 CARTRIDGE, packing 1 8 HOUSING, outlet 197334 Standard; models

L145C1, L145C3 1

197336 With built-in filter; models L145C2, L145C4

15J673 Standard; model L14AC1 1 9 * 244892 O-RING, PTFE, top cylin-

der (pack of 10)

10 244826 PIN, self-locking 1 11 197315 CYLINDER, lower 1 12 * 253029 BALL, piston; 9/16 in.

(14mm) diameter (pack of 3)

13 197309 VALVE, piston 1 14 197303 HOUSING, inlet 1 15 197307 GUIDE, ball, inlet 1 16* 253031 BALL, inlet; 1.25 in. Di-

ameter (pack of 3) 1

17 244855 SHIM, inlet, ball guide (pack of 9)

18 196358 SEAT, 1 in. Ball 1 19 244996 PLUG, throat seal (pack of

10)

20 † 197338 CAP, filter, top 1 21 † 171941 SPRING, compression 1 22*† 244895 O-RING; PTFE, filter

(pack of 10)


19

See Packaging Kits, Section 11, page 19






180cc Lowers Models L180C1, L180C2, L180C3, L180C4, L18AC1

Ref. No. Part No. Description Qty 1 15J094 ROD, displacement 1 2 197330 NUT, packing 1 3 * 244882 GLAND, male (pack of 4) 4 * 244858 V-PACKING, PTFE (pack of 10) 5 * 244870 V-PACKING, leather (pack of 10) 6 * 244876 GLAND, female (pack of 4) 7 197326 CARTRIDGE, packing 1 8 HOUSING, outlet 197334 Standard; models L145C1,

L145C3 1


15J673 Standard; model L14AC1 1 9 * 244892 O-RING, PTFE, top cylinder

(pack of 10)

10 244826 PIN, self-locking 1 11 197316 CYLINDER, lower 1 12 * 253029 BALL, piston; 9/16 in. (14mm)

diameter (pack of 3)

13 197310 VALVE, piston 1 14 197303 HOUSING, inlet 1 15 197307 GUIDE, ball, inlet 1 16* 253031 BALL, inlet; 1.25 in. Diameter

(pack of 3) 1

17 244855 SHIM, inlet, ball guide (pack of 9) 18 196358 SEAT, inlet 1 19 244996 PLUG, throat seal (pack of 10) 20 † 197338 CAP, filter, top 1 21 † 171941 SPRING, compression 1 22*† 244895 O-RING; PTFE, filter (pack of 10)


23 † STRAINER, 60 mesh screen 224459 Pack of 2 238438 Pack of 25 24 † 186075 SUPPORT, filter 1 25* 244890 O-RING; PTFE, bottom cylin-

der (pack of 10)

26 † 197339 CAP, filter, bottom 1 27* 244890 O-RING; PTFE, (pack of 10) 28*† 244896 O-RING; PTFE, filter bottom,

blue (pack of 10)

30 172479 TAG, warning 1

35* 244864 V-Packing, UHMWPE (Pack of 10)

38 † 158491 FITTING, nipple 2 39 † 244517 PLUG, packless, 0.5 in. 1

40 † 245143 VALVE, pressure, dump 1 41 † 116746 FITTING, barbed, plated 1 42 † 116750 TUBE, nylon 1

49 PLUG, pipe 101754 Models L145C1, L145C3 1

198292 Models L145C2, L145C4 1

Replacement Danger and Warning labels, tags

and cards are available at no cost.

† For models L145C2 and L145C4 only.

Not Shown * Parts included in packing kit (purchase sepa-

rately). See Packing Kits.


See Packaging Kits, Section 11, page 19

19






220CC Lowers Models L220C1, L220C2, L220C3, L220C4, L22AC1


1 15J095 ROD, displacement 1 2 197331 NUT, packing 1 3 * 244883 GLAND, male (pack of 4) 244884 4 * 244859 V-PACKING, PTFE

(pack of 10)

244860 5 * 244871 V-PACKING, leather

(pack of 10)

244872 6 * 244877 GLAND, female

(pack of 4)

244878 7 197327 CARTRIDGE, packing 1 8 HOUSING, outlet 197335 Standard; models L220C1,

L220C3 1


15H722 Standard; 5.9 in. Bolt pattern; model L22AC1 only

1

9 * 244893 O-RING, PTFE, top cylinder (pack of 10)




(pack of 3) 1


18 197344 SEAT, inlet 1 19 244999 PLUG, throat seal (pack of 10) 20 † 197338 CAP, filter, top 1 21 † 171941 SPRING, compression 1 22*† 244895 O-RING; PTFE, filter

(pack of 10)

Ref. No. Part No. Description Qty 23 † STRAINER, 60 mesh screen 224459 Pack of 2 238438 Pack of 25 24 † 186075 SUPPORT, filter 1 25* 244894 O-RING; PTFE, bottom cylin-

der (pack of 10)

26 † 197339 CAP, filter, bottom 1 27* 244891 O-RING; PTFE, (pack of 10) 28*† 244896 O-RING; PTFE, filter bottom,

blue (pack of 10)

30 172479 TAG, warning 1 35* 244865 V-Packing, UHMWPE

(pack of 10)

244866 38 † 158491 FITTING, nipple 2 39 † 244517 PLUG, packless, 0.5 in. 1

40 † 245143 VALVE, pressure, dump 1 41 † 116746 FITTING, barbed, plated 1 42 † 116750 TUBE, nylon 1 49 PLUG, pipe 101754 Models L220C1, L220C3 1

198292 Models L220C2, L220C4 1 Replacement Danger and Warning labels, tags

and cards are available at no cost. † For models L220C2 and L220C4 only.

Throat packings.

Piston packings.

Not Shown * Parts included in packing kit (purchase sepa-



See Packaging Kits, Section 11, page 19, 20

19, 20






250cc Lowers Models L250C1, L250C2, L250C3, L250C4

Ref. No.


1 15J096 ROD, displacement 1 2 197331 NUT, packing 1 3 * 245232 GLAND, male (pack of 4) 4 * 245229 V-PACKING, PTFE (pack of 10) 5 * 245230 V-PACKING, leather

(pack of 10)

6 * 245233 246530

GLAND, female (pack of 4) MODELS, L25OC1, L25OC2 MODELS, L25OC3, L250C4

7 197328 CARTRIDGE, packing 1 8 HOUSING, outlet 197335 Standard; models L145C1,

L145C3 1


15H722 Standard; model L14AC1 1 9 * 244893 O-RING, PTFE, top cylinder

(pack of 10)




(pack of 3) 1


18 197344 SEAT, inlet 1 19 244999 PLUG, throat seal

(pack of 10)

20 † 197338 CAP, filter, top 1 21 † 171941 SPRING, compression 1 22*† 244895 O-RING; PTFE, filter

(pack of 10)

Ref. No.


23 † STRAINER, 60 mesh screen

224459 Pack of 2 238438 Pack of 25 24 † 186075 SUPPORT, filter 1 25* 244894 O-RING; PTFE, bottom

cylinder (pack of 10)

26 † 197339 CAP, filter, bottom 1 27* 244891 O-RING; PTFE, (pack of

10)

28*† 244896 O-RING; PTFE, filter bot-tom, blue (pack of 10)

30 172479 TAG, warning 1 35* 245231 V-Packing, UHMWPE

(Pack of 10)

38 † 158491 FITTING, nipple 2 39 † 244517 PLUG, packless, 0.5 in. 1

40 † 245143 VALVE, pressure, dump 1 41 † 116746 FITTING, barbed, plated 1 42 † 116750 TUBE, nylon 1 49 PLUG, pipe 101754 Models L250C1, L250C3 1

198292 Models L250C2, L250C4 1

Replacement Danger and Warning labels, tags and cards are available at no cost.

† For models L250C2 and L250C4 only. Not Shown * Parts included in packing kit (purchase sepa-



19

See Packaging Kits, Section 11, page 19, 20 See Packaging

Kits, Section 11, page 19

19






1 15J097 ROD, displacement 1 2 197331 NUT, packing 1 3 * 244885 GLAND, male (pack of 4) 244886 4 * 244861 V-PACKING, PTFE

(pack of 10)

244862 5 * 244873 V-PACKING, leather

(pack of 10)

244874 6 * 244879 GLAND, female

(pack of 4)

244880 7 197327 CARTRIDGE, packing 1 8 HOUSING, outlet 197335 Standard; models L290C1,

L290C3 1


1

15H722 Standard; 5.9 in. Bolt pat-tern, model L29AC1 only

9 * 244893 O-RING, PTFE, top cylin-der (pack of 10)

10 244826 PIN, self-locking 1 11 197319 CYLINDER, lower 1 12 * 244899 BALL, piston; 9/16 in.

(14mm) diameter (pack of 3)

13 197313 VALVE, piston 1 14 197304 HOUSING, inlet 1 15 197308 GUIDE, ball, inlet 1 16* 253030 BALL, inlet; 1.5 in. Diame-

ter (pack of 3)


18 197344 SEAT, inlet 1 19 244999 PLUG, throat seal (pack of

10)

20 † 197338 CAP, filter, top 1

21 † 171941 SPRING, compression 1 22*† 244895 O-RING; PTFE, filter (pack

of 10)


23 † STRAINER, 60 mesh screen 224459 238438 Pack of 25 24 † 186075 SUPPORT, filter 1

25* 244894 O-RING; PTFE, bottom cylinder (pack of 10)

26 † 197339 CAP, filter, bottom 1 27* 244891 O-RING; PTFE, (pack of 10) 28*† 244896 O-RING; PTFE, filter bottom, blue

(pack of 10)

30 172479 TAG, warning 1 35* 244867 V-Packing, UHMWPE (pack of

10)

244868 38 † 158491 FITTING, nipple 2 39 † 244517 PLUG, packless, 0.5 in. 1 40 † 245143 VALVE, pressure, dump 1 41 † 116746 FITTING, barbed, plated 1 42 † 116750 TUBE, nylon 1 49 PLUG, pipe 101754 Models L145C1, L145C3 1

198292 Models L145C2, L145C4 1

Replacement Danger and Warning labels, tags and cards are available at no cost.

† For models L290C2 and L290C4 only.

Throat packings. Piston packings. Not shown.

* Parts included in packing kit (purchase separately). See Packing Kits.



See Packaging Kits, Section 11, page 19, 20

19, 20


GRACO NXT XTREME PUMP LOWER: PACKING KITS, FLUID DRAIN VALVE & STRAINERS

Xtreme Seal™ Repair Kits

Kit 288058 for 115 cc Lowers

Kit 244850 for 145 cc (600) Lowers



Ref. Description Qty 3 GLAND, packing, male 2

5 V-PACKING, leather 4

6 GLAND, packing, female 2

35 V-PACKING, UHMWPE 6

Tuff Stack™ Repair Kits

Kit 288060 for 115 cc Lowers




Ref. Description Qty 3 GLAND, packing, male 2

4 V-PACKING, PTFE 10

6 GLAND, packing, female 2

Xtreme Seal™ Repair Kits



Ref. Description Qty 3* GLAND, packing, male 1

3** GLAND, packing, male 1

5* V-PACKING, leather 2

5** V-PACKING, leather 2

6* GLAND, packing, female 1

6** GLAND, packing, female 1

35* V-PACKING, UHMWPE 3

35** V-PACKING, UHMWPE 3

Section 11, Page 9 - 18

Section 11, Page 9 -



GRACO NXT XTREME PUMP LOWER: PACKING KITS, FLUID DRAIN VALVE & STRAINERS

Tuff Stack™ Repair Kits Kit 244902 for 220 cc (900) Lowers


Ref. Description Qty 3* GLAND, packing, male 1

3** GLAND, packing, male 1

4* V-PACKING, PTFE 5

4** V-PACKING, PTFE 5

6* GLAND, packing, female 1

6** GLAND, packing, female 1

Fluid Drain Valve Repair Kit 245145

Ref. Description Qty 1 BALL, carbide 1

2 RING, retaining 1

3 O-RING, PTFE 2

4 SEAT, valve 1

5 GASKET 1

Strainers (Ref. 223)

2 Pack 25 Pack Lower Size 30 mesh 60 mesh 100 mesh 30 mesh 60 mesh 100 mesh 115 cc 236495 236496 236497 238444 238446 238448

145 cc 180 cc 220 cc 244458 224459 224468 238436 238438 238440 250 cc 290 cc



PART.NR MODEL DESCRIPTION QTY

GRACO 63:1 SILVER LINE LOWER

224 545 Series A Pump Lower CS (LEATHER & PTFE PACKING) (1)

Note: All part numbers start with EQP–SP – Therefore SAGE reference to Part no. 224545 is EQP-SP-224545

Ref. No.

Part No. Description Qty.

101 218346 HOUSING, pump; carton steel, Includes Items 101a and 101b

1

101a 180188 BUSHING, adapter; carton steel; 3/4 npt (f) x 1-5/16" (m)

1

101b 102595 O-RING; PTFE 1

102 205514 NUT, packing, w/wet-cup; carbon steel

103 236279 ROD, displacement; stainless steel 1

104 178900 SLEEVE, housing; stainless steel 1

105 * 164652 GASKET; PTFE 1

106 * 186209 RETAINER, seal; stainless steel 1

111 223602 STUD, piston; stainless steel with tung-sten carbide seat

1

112 * 112264 BALL; 3/4" dia.; carbide 1

116 172399 PIN, ball stop, intake; stainless steel 1

117 * 166073 O-RING, PTFE 1

118 178761 GUIDE, ball; carbon steel 1

119 217476 INTAKE VALVE; carbon steel with tung-sten carbide seat

1

120 * 101178 BALL; 1-1/4" dia.; carbon steel 1

130 * 223483 GLAND/PACKING STACK 2

* Included in standard repair kit 224433. Some parts in kit are

different from those in pump; see list at right.

Standard Repair Kit 224433 with Leather and PTFE packings Consists of:

Part No. Description Qty 100103 Cotter Pin (for use with old

style connecting rod and coupling nut)

1

112264 Ball, piston; carbide 1

101178 Ball, intake; cst 1

164652 Gasket; PTFE 1

186209 Retainer, seal 1 166073 O-Ring; PTFE 1

223483 Gland / Packing Stack 2

Available Gland/Packing Stacks

223481 UHMWPE and PTFE 223482 All PTFE

Optional 166730 Rubber V-packings (10 req'd) For converting to rubber packed pump.

Install in place of 8 Leather, 2 PTFE packings.

(To convert pump to alternative packing material)


GRACO 45:1 SILVER LINE LOWER

224 435 Series B Pump Lower CS (LEATHER PACKING) (1) 1 207–470 HOUSING, pump; carbon steel (1) 2 207–471 PACKING NUT/WET-CUP; carbon steel (1) 3 207–472 PISTON; carbon steel with tungsten carbide (TC) seat (1) 4 207–473 HOUSING, intake valve; carbon steel with (TC) seat (1) 6* 102–972 BALL, stainless steel; 7/8” dia. (1) 7* 102–973 BALL, stainless steel; 1–1/4” dia (1) 9 * 106–260 O-RING; PTFE (1) 11 167–890 PIN, ball stop, intake valve; carbon steel (1) 12 167–891 RETAINER; carbon steel (1) 13 167–892 GUIDE, ball; carbon steel (1) 14 178–894 SLEEVE; stainless steel (1) 15* 167–894 GASKET ; PTFE (1) 16 167–895 WASHER, flat; carbon steel (1) 22 236–278 ROD, displacement; stainless steel (1) 26 172–479 TAG, warning (not shown) (1) 29* 223–480 GLAND/PACKING STACK; Leather with PTFE backup (2) * * These parts are included in Repair Kit 224–438, which may be purchased separately. The kit includes a tube of 102–969 thread sealant for use on the piston (3). Note: All part numbers start with EQP–SP – Therefore SAGE reference to Part no. 224435 is EQP-SP-224435

ITEM PART.NR. MODEL DESCRIPTION QTY


TRM_Sec11_Airless_Spray_Systems_COVERTRM_Sec11_Airless_Spray_Systems PART.NR. MODEL DESCRIPTIONPART.NR.MODELDESCRIPTIONQTY

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice

/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Bicubic /GrayImageResolution 300 /GrayImageDepth -1 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 1.50000 /EncodeGrayImages true /GrayImageFilter /DCTEncode /AutoFilterGrayImages true /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Bicubic /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile () /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False

/CreateJDFFile false /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure false /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles false /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /DocumentCMYK /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /UseDocumentProfile /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice

Documents

SECTION 11 AIRLESS SPRAY SYSTEMS...GRACO NXT & KING XTREME PUMP LOWER 180cc WITH BUILT-IN FILTER 302) LL180C2 X70 & KING 68:1 Pump Lower with Built-in Filter (1) Note: All part numbers