Upload
nguyenbao
View
226
Download
2
Embed Size (px)
Citation preview
Published
PARTS MANUALSECTION
Important Operatingand Safety Instructionsare found in the MowerSafety Video that canbe instantly accessedon the internet at:www.algqr.com/bve
An Operator’s Manual was shipped with the equipment. The Operator’s Manual is an integral part of the safe operation of this machine and must be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. If the Operator’s Manual is not with the equipment, contact your dealer or Bush Hog to obtain a copy before operating the equipment.
08/12
72A
2720/12720This Manual applies to models 2720 and 12720 that use a blade panwhich measures 27.5” blade hole center to blade hole center. Also
blades measure 28.25 “ from hole center to blade tip.See Section 72 if these dimensions are different.
FLEX WING ROTARY MOWER
AUGUST, 2012BUSH HOG/ LAND MAINTENANCE REPAIR PARTS MANUAL
2720 FLEX-WING CUTTERS – 540 RPM12720 FLEX-WING CUTTERS – 1000 RPM12720 FLEX WING SHREDDER _ 1000 RPM
THIS MANUAL APPLIES TO MODELSSERIAL NO’S. 12-01053 AND ABOVE
ALPHABETICAL INDEX
CONTENTS PAGEAxle Arms ...........................................................................................................................................................72A-5-5Axle Assembly ....................................................................................................................................................72A-5-4Baffle Kit .............................................................................................................................................................72A-6-1Bands, Rear .........................................................................................................................................72A-2-4, 72A-2-5Belting, Front ......................................................................................................................................................72A-2-3Chains, Front ......................................................................................................................................................72A-2-1
Rear..........................................................................................................................................................72A-2-2Safety Tow.................................................................................................................................72A-5-1, 72A-5-2
Decals.................................................................................................................................................................72A-8-1Deck Assembly, Center 2720 & 12720...............................................................................................................72A-1-1Deck Assembly, Center 12720 Shredder.............................................................................................72A-1-2, 72A-1-3
Right Hand Wing 2720 & 12720 ...............................................................................................................72A-1-4Right Hand Wing 12720 Shredder............................................................................................................72A-1-6Left Hand Wing, 2720 & 12720 ................................................................................................................72A-1-5Left Hand Wing, 12720 Shredder .............................................................................................................72A-1-7
Driveshaft Assemblies .............................................................................................................72A-4-1 through 72A-4-5Gearbox Assemblies................................................................................................................72A-3-1 through 72A-3-5Hitch Assemblies ................................................................................................................................................72A-5-3Hub Assemblies..................................................................................................................................................72A-5-5Hydraulic Cylinders.............................................................................................................................................72A-7-2Hydraulics. ..........................................................................................................................................................72A-7-1Jackstand.............................................................................................................................................72A-5-1, 72A-5-2Leveling Rod ........................................................................................................................................72A-5-1, 72A-5-2Shield Assembly, Center ....................................................................................................................................72A-2-6
Wing .........................................................................................................................................................72A-2-7Shredder Kit ........................................................................................................................................................72A-6-2Tongue.................................................................................................................................................72A-5-1, 72A-5-2Wheels and Tires.....................................................................................................................72A-5-6 through 72A-5-7
BUSH HOG/ LAND MAINTENANCE REPAIR PARTS MANUAL
72A-1-1
AUGUST, 2012
CENTER FRAME ASSEMBLYMODELS 2720 & 12720
Ref. Part Description Qty.No. No. Req’d.
1 50029949 Center Deck (Rings) w/Decals 12 D549 Decal, Danger / Important 13 D547 Decal / Warning Decal 540 RPM 13A D548 Decal, 1000RPM (Overlay) 14 91443 Decal, Important - Slip Clutch 15 D551 Decal, Blade Rotation CCW 16 D544 Decal, Important - Transport 17 D555 Decal, Danger 28 D565 Decal, Danger 29 D546 Decal, Danger 110 D553 Decal, Warning Important 111 D614 Decal, Danger 212 D587 Decal, Lubrication 113 D559 Decal, Gen. Bush Hog Parts 114 50029689 Skid 215 -------- Carriage Bolt 1/2” x 1-3/4” Gr.5 816 -------- Flatwasher 1” 217 -------- Flatwasher 1/2” 818 -------- Lockwasher 1/2” 819 -------- Hex Nut 1/2” 820 84672 Pin, Transport Latch 121 1273BH Presto Pin 322 50069170 Hinge Rod 223 50029920 Hinge Connector 224 -------- Capscrew 3/4” x 2-1/2” Gr.5 625 -------- Locknut, Flanged 3/4” 6
Ref. Part Description Qty.No. No. Req’d.
26 -------- Locknut Flanged 5/8” 427 -------- Capscrew 5/8” x 2-1/4” Gr.5 428 63607 Blade Bolt Kit 229 7557BH Blade, CCW Rotation 230 50066106 Pan Assy. 131 50068700 Gearbox Assy .Center 540 RPM 1
50068697 Gearbox Assy. Center 1000 RPM 132 71202 Gearbox Assy. Transfer 540 RPM (Comer) 1
50045696 Gearbox Assy. Transfer 540 RPM (B & P) 171203 Gearbox Assy. Transfer 1000 RPM (Comer) 1
50045697 Gearbox Assy. Transfer 1000 RPM (B & P) 133 50058538 Driveshaft, Center 134 76664 Spring Washer 135 70418 Castle Nut M36 x 3 136 70419 Cotter Pin M6 x 70 137 50028476 Wing Latch 238 -------- Capscrew 3/8” x 2” Gr.5 439 -------- Flatwasher 3/8” 440 -------- Locknut 3/8” 441 -------- Capscrew 3/4” x 2” Gr.5 242 -------- Locknut 3/4” 243 50029677 Transport Latch 144 50029784 Pin, Transport 145 21020614 Cotter Pin 3/16” x 1-1/2” 146 50029783 Pin 147 D813 Decal, Danger - Multilingual 1
3027.5”
center to center Blade measures28.25” center ofblade hole toblade tip.
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-1-2
CENTER FRAME ASSEMBLYMODELS 12720 SHREDDER
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-1-3
Ref. Part Description Qty.No. No. Req’d.
1 50029949 Center Deck (Rings) w/Decals 12 D549 Decal, Danger / Important 13 D547 Decal / Warning Decal 540 RPM 13A D548 Decal, 1000RPM (Overlay) 14 91443 Decal, Important - Slip Clutch 15 D551 Decal, Blade Rotation CCW 26 D544 Decal, Important - Transport 17 D555 Decal, Danger 28 D565 Decal, Danger 29 D546 Decal, Danger 110 D553 Decal, Warning Important 111 D614 Decal, Danger 212 D587 Decal, Lubrication 113 D559 Decal, Gen. Bush Hog Parts 114 50029689 Skid 215 -------- Carriage Bolt 1/2” x 1-3/4” Gr.5 816 -------- Flatwasher 1” 217 -------- Flatwasher 1/2” 818 -------- Lockwasher 1/2” 819 -------- Hex Nut 1/2” 820 84672 Pin, Transport Latch 121 1273BH Presto Pin 322 50069170 Hinge Rod 223 50029920 Hinge Connector 224 -------- Capscrew 3/4” x 2-1/2” Gr.5 625 -------- Locknut, Flanged 3/4” 626 -------- Locknut Flanged 5/8” 427 -------- Capscrew 5/8” x 2-1/4” Gr.5 428 50028476 Wing Latch 229 -------- Capscrew 3/4” x 2” Gr.5 230 -------- Locknut 3/4” 231 -------- Capscrew 3/8” x 2” Gr.5 432 -------- Flatwasher 3/8” 433 -------- Locknut 3/8” 434 50029784 Pin, Transport 135 50029783 Pin 136 -------- Cotter Pin 3/16” x 1-1/2” 137 -------- Cotter Pin 1/4” x 2-1/2” 238 44383BH Slotted Nut 1-1/8” 239 86310 Pivot Bushing 240 50040233BH Blade, Straight - Double Edge 241 7556BH Blade, Uplift 242 90612 Blade Bolt 243 50041960 Blade Bar 144 76664 Spring Washer 145 70419 Cotter Pin M6 x 70 146 70418 Castle Nut M36 x 3 147 50029677 Transport Latch 148 50068697 Center Gearbox 1000 RPM 149 71203 Gearbox, Transfer 1000 RPM (Comer) 1
50045697 Gearbox, Transfer 1000 RPM (B & P) 150 50058538 Center Drive Line 151 D813 Decal, Danger - Multilingual 1
CENTER FRAME ASSEMBLYMODELS 12720 SHREDDER
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-1-4
RIGHT HAND WING FRAME ASSEMBLYMODELS 2720 & 12720
Ref. Part Description Qty.No. No. Req’d.
1 50029948 Wing Frame (Rings) w/Decals 12 50040103 Front Skid R.H. 13 50040105 Rear Skid R.H. 14 3161212 Plow Bolt 3/8” x 1-1/4” 65 --------- Flatwasher 3/8” 66 --------- Lockwasher 3/8” 67 --------- Hex Nut 3/8” 68 50061049 Bush Hog Decal 19 --------- Capscrew 3/8” x 1” 210 --------- Lockwasher 3/8” 211 --------- Flatwasher 1” 212 50029783 Pin Assembly 113 50031959 Push Over Assy. 114 --------- Capscrew 3/4” x 2-1/2” Gr.8 615 --------- Locknut, Flanged 3/4” 6
Ref. Part Description Qty.No. No. Req’d.
16 --------- Cotter Pin 3/16” x 1-1/2” 317 99566 Wing Lift Cylinder 118 95425 Pin 119 --------- Cotter Pin 3/16 x 1-1/2” 320 63607 Bush Hog Blade Kit 221 7557BH Blade - Uplift CCW 222 50066106 Blade Pan Weldment 123 70418 Castle Nut M36 x 3 124 76664 Spring Washer 125 70419 Cotter Pin M6 x 70 126 50031212 Reflector, Amber 127 D551 Decal, Blade Rotation CCW 128 D614 Decal, Danger (Thrown Object) 229 50068702 Gearbox Assy. R.H. 540 RPM 1
50068699 Gearbox Assy. R.H. 1000 RPM 130 D546 Decal, Danger (Missing Guard) 1
2227.5”
center to center
Blade measures28.25” center ofblade hole toblade tip.
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-1-5
LEFT HAND WING FRAME ASSEMBLYMODELS 2720 & 12720
Ref. Part Description Qty.No. No. Req’d.
1 50029950 Wing Frame (Rings) w/Decals 12 50040099 Front Skid L.H. 13 50040101 Rear Skid L.H. 14 3161212 Plow Bolt 3/8” x 1-1/4” 65 --------- Flatwasher 3/8” 66 --------- Lockwasher 3/8” 67 --------- Hex Nut 3/8” 68 50061049 Bush Hog Decal 19 --------- Capscrew 3/8” x 1” 210 --------- Lockwasher 3/8” 211 --------- Flatwasher 1” 212 50029783 Pin Assembly 113 50031959 Push Over Assy. 114 --------- Capscrew 3/4” x 2-1/2” Gr.8 615 --------- Locknut, Flanged 3/4” 6
Ref. Part Description Qty.No. No. Req’d.
16 --------- Cotter Pin 3/16” x 1-1/2” 317 99566 Wing Lift Cylinder 118 95425 Pin 119 --------- Cotter Pin 3/16 x 1-1/2” 320 63607 Bush Hog Blade Kit 221 60528 Blade - Uplift CW 222 50066106 Blade Pan Weldment 123 70418 Castle Nut M36 x 3 124 76664 Spring Washer 125 70419 Cotter Pin M6 x 70 126 50031212 Reflector, Amber 127 D552 Decal, Blade Rotation CW 128 D614 Decal, Danger (Thrown Object) 229 50068701 Gearbox Assy. L.H. 540 RPM 1
50068698 Gearbox Assy. L.H. 1000 RPM 130 D546 Decal, Danger (Missing Guard) 1
2227.5”
center to center
Blade measures28.25” center ofblade hole toblade tip.
AUGUST, 2012
Ref. Part Description Qty.No. No. Req’d.
1 50029948 Wing Frame (Rings) w/Decals 12 50040103 Front Skid R.H. 13 50040105 Rear Skid R.H. 14 3161212 Plow Bolt 3/8” x 1-1/4” 65 --------- Flatwasher 3/8” 66 --------- Lockwasher 3/8” 67 --------- Hex Nut 3/8” 68 50061049 Bush Hog Decal 19 --------- Capscrew 3/8” x 1” 210 --------- Lockwasher 3/8” 211 --------- Flatwasher 1” 212 50029783 Pin Assembly 113 50031959 Push Over Assy. 114 --------- Capscrew 3/4” x 2-1/2” Gr.8 615 --------- Locknut, Flanged 3/4” 616 --------- Cotter Pin 3/16” x 1-1/2” 117 99566 Hydraulic Cylinder, Wing Lift 1
Ref. Part Description Qty.No. No. Req’d.
18 95425 Pin 119 --------- Cotter Pin 3/16 x 1-1/2” 320 --------- Cotter Pin 1/4” x 2-1/2” 221 44383BH Slotted Nut-1/8 222 86310 Pivot Bushing 223 50040233BH Blade Straight Double Edged 224 50041960 Blade Bar Assembly 125 7556BH Blade, Uplift CCW 226 90612 Blade Bolt 227 50031212 Reflector, Amber 128 D551 Decal, Blade Rotation-CCW 129 D614 Decal, Danger (Thrown Objects) 230 70418 Castle Nut M36 x 3 131 70419 Cotter Pin M6 x 70 132 76664 Spring Washer 133 50068699 Gearbox Assy. 1000 RPM 134 D546 Decal, Danger (Missing Guard) 1
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-1-6
RIGHT HAND WING FRAME ASSEMBLYMODELS 12720 SHREDDER
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-1-7
AUGUST, 2012
Ref. Part Description Qty.No. No. Req’d.
1 50029950 Wing Frame (Rings) w/Decals 12 50040099 Front Skid L.H. 13 50040101 Rear Skid L.H. 14 3161212 Plow Bolt 3/8” x 1-1/4” 65 --------- Flatwasher 3/8” 66 --------- Lockwasher 3/8” 67 --------- Hex Nut 3/8” 68 50061049 Bush Hog Decal 19 --------- Capscrew 3/8” x 1” 210 --------- Lockwasher 3/8” 211 --------- Flatwasher 1” 212 50029783 Pin Assembly 113 50031959 Push Over Assy. 114 --------- Capscrew 3/4” x 2-1/2” Gr.8 615 --------- Locknut, Flanged 3/4” 616 --------- Cotter Pin 3/16” x 1-1/2” 117 99566 Hydraulic Cylinder, Wing Lift 1
Ref. Part Description Qty.No. No. Req’d.
18 95425 Pin 119 --------- Cotter Pin 3/16 x 1-1/2” 320 --------- Cotter Pin 1/4” x 2-1/2” 221 44383BH Slotted Nut-1/8 222 86310 Pivot Bushing 223 50040233BH Blade Straight Double Edged 224 50041960 Blade Bar Assembly 125 90242 Blade, Uplift CW 226 90612 Blade Bolt 227 50031212 Reflector, Amber 128 D552 Decal, Blade Rotation-CW 129 D614 Decal, Danger (Thrown Objects) 230 70418 Castle Nut M36 x 3 131 70419 Cotter Pin M6 x 70 132 76664 Spring Washer 133 50068698 Gearbox Assy. 1000 RPM 134 D546 Decal, Danger (Missing Guard) 1
LEFT HAND WING FRAME ASSEMBLYMODELS 12720 SHREDDER
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-2-1
AUGUST, 2012
REF. PARTNO. NO. QTY. DESCRIPTION
1 50033596 1 Chain Assembly, Center Front, Single50033597 1 Chain Assembly, Center Front, Double
2 50033604 2 Chain Assembly, Center Side, Single50033605 2 Chain Assembly, Center Side, Double
3 50029957 2 Chain Assembly, Inner Wing, Single50029958 2 Chain Assembly, Inner Wing, Double
4 50029960 4 Chain Assembly, Outer Wing, Single50029961 4 Chain Assembly, Outer Wing, Double
5 50033599 1 Support, Center Front6 50017211 A/R Chain, 6 Link, Single
50017213 A/R Chain, 11 Link, Double7 50017210 A/R Spiral Pin 1/8” x 1-1/4”8 50033598 1 Pin, Front Center9 50033607 2 Support, Center Side10 50033606 2 Pin, Center Side11 50017264 6 Chain, 5 Link12 50029955 2 Support, Inner Wing13 50029956 2 Pin, Inner Wing14 50029959 4 Support, Outer Wing15 50029952 4 Pin, Outer Wing16 50029828 1 Chain Baffle Assembly, R.H. Front (Not Shown)
50029831 1 Chain Baffle Assembly, L.H. Front17 50029825 2 Chain Bar, Short18 44534BH 4 Carriage Bolt 3/8” x 1-3/4”19 50029833 4 Spacer 3/4”20 –––– 50 Flatwasher 3/8”21 9131200 10 Locknut 3/8”22 5161212 6 Carriage Bolt 3/8” x 1-1/4”23 –––– 50 Lockwasher 3/8”24 –––– 50 Hex Nut 3/8”25 44286 50 Carriage Bolt 3/8” x 1-1/2”
FRONT CHAIN ASSEMBLYFor Model 2720 & 12720
12
34
4
77
7 7 7
7
7
7
6
66
6
6
10
97
78
25,20,23,24
25,20,23,24
25,20,23,2425,20,23,24
1214
1413
15
15
16
22,20,21
11
1719
18
2021
5
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-2-2
AUGUST, 2012
REAR CHAIN ASSEMBLYFor Models 2720 & 12720
REF. PARTNO. NO. QTY. DESCRIPTION
1 50029991 1 Center Rear Chains, Single50029992 1 Center Rear Chains, Double
2 50029983 1 R.H. Chain Assembly, Single (shown)50029984 1 R.H. Chain Assembly, Double50029981 1 L.H. Chain Assembly, Single50029982 1 L.H. Chain Assembly, Double
3 50029972 2 Short Wing Chain Assy., Single50029973 2 Short Wing Chain Assy., Double
4 50029968 2 Inside Wing Chains, Single50029969 2 Inside Wing Chains, Double
5 50029964 2 Rear Wing Chains, Single50029965 2 Rear Wing Chains, Double
6 50034579 1 Chain Bar Assy., R.H. (shown)50034601 1 Chain Bar Assy., L.H.
7 50068146 2 Outside Support8 50068148 1 Left Outside Support9 50068151 1 Left Inside Support10 50068154 1 Rear Center Support11 50068152 1 Right Inside Support12 50068149 1 Right Outside Support13 50029990 1 Chain Rod, 74.38”14 50017210 14 Spiral Pin 1/8” x 1-1/4”15 50029811 62 Chain, 3 Link, Single
50017264 52 Chain, 5 Link, Double16 50017211 55 Chain, 6 Link, Single
50017213 55 Chain, 11 Link, Double17 50018912 26 Chain, 4 Link, Single
50017212 16 Chain, 7 Link, Double18 50029980 2 Retaining Rod
REF. PARTNO. NO. QTY. DESCRIPTION
19 50029979 1 R.H. Bracket Weldment50029974 1 L.H. Bracket Weldment
20 50029970 2 Short Wing Chain Support21 50029971 2 Short Wing Pin22 50029966 2 Inside Wing Chain Support23 50029967 2 Inside Wing Pin24 50017264 64 Chain, 5 Link, Single
50029803 64 Chain, 9 Link, Double25 50029962 2 Chain Support, Rear Wing26 50029963 2 Rear Wing Pin27 50034578 2 Chain Bar28 –––– 4 Capscrew 3/8” x 2-1/2”29 50029833 4 Spacer 3/4”30 5161212 16 Carriage Bolt 3/8” x 1-1/4”31 –––– 70 Flatwasher 3/8”32 –––– 50 Lockwasher 3/8”33 –––– 50 Hex Nut 3/8”34 9131200 20 Locknut 3/8”35 44286 50 Carriage Bolt 3/8” x 1-1/2”
3
15 1516
1613
7
7
8
910
11
12
1616
16
1616
56 2
24 17 15 17
1819
26
23
22
4
1
21
14 14 14
14
14
25 2714
14
20
35, 31, 32, 33
35, 31, 32, 33
35, 31,32, 33
35,31,32,33 35,31,
32,33
28,29,31,34
30,31,34
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-2-3
AUGUST, 2012
FRONT BELTING ASSEMBLYModel 2720 & 12720
REF. PARTNO. NO. QTY. DESCRIPTION
1 50028763 2 Belting, Wing2 50028762 4 Belting Cover, Wing3 50028426 1 Belting, Center4 91326 2 Belting Cover, Center5 50028765 2 Belting, Outside Center6 50028764 4 Belting Cover, Outside Center7 44534BH 50 Carriage Bolt 3/8” x 1-3/4”8 –––– 50 Flatwasher 3/8”9 –––– 50 Lockwasher 3/8”10 ––– 50 Hex Nut 3/8”
4
4
3
6
2
2
6
5
1
7,8,9,10
7,8,9,10
7,8,9,10
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-2-4
AUGUST, 2012
REAR BAND ASSEMBLYFOR SINGLE WING WHEELS
Model 2720 & 12720
REF. PARTNO. NO. QTY. DESCRIPTION
1 50029993 1 Outside Band, L.H.2 50029995 1 Inside Band, L.H.3 50029996 1 Center Band4 50029997 1 Inside Band, R.H.5 50029994 2 Wing Center Band6 50029998 1 Outside Band, R.H.7 50029999 2 Outside Band8 5161212 55 Carriage Bolt 3/8” x 1-1/4”9 –––– 18 Flatwasher 3/8”10 –––– 55 Lockwasher 3/8”11 –––– 55 Hex Nut 3/8”
1
7
8
8
9 10
10
11
11
3
4
8, 9, 10, 11
8, 9, 10, 11
8, 10, 11
8, 9, 10, 118, 9, 10, 11
5
6 7
8
1110
5
2
L. H. WING
R. H. WING
CENTER
8, 9, 10, 11
8, 9, 10, 11
8, 10, 11
8, 9, 10, 11
8, 10, 11
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-2-5
REF. PARTNO. NO. QTY. DESCRIPTION
1 50029995 1 Inside Band, L.H.2 50029996 1 Center Band3 50029997 1 Inside Band, R.H.4 50029999 2 Outside Band5 5161212 47 Carriage Bolt 3/8” x 1-1/4”6 –––– 16 Flatwasher 3/8”7 –––– 53 Lockwasher 3/8”8 –––– 53 Hex Nut 3/8”9 50038604 1 Center Band, R.H. Wing10 50038601 1 Center Band, L.H. Wing11 50038630 2 Spacer12 44534BH 2 Carriage Bolt 3/8” x 1-3/4”13 44286 2 Carriage Bolt 3/8” x 1-1/2”
4
5
6 7
7
8
8
2
3
5, 6, 7, 8
13, 6, 7, 8
5, 7, 8
9
12, 6, 7, 8
11
11
5
4 87
10
1
L. H. WING
R. H. WING
CENTER
5, 6, 7, 8
13, 6, 7, 8
5, 7, 8
12
5, 7, 8
REAR BAND ASSEMBLYFOR DUAL WING WHEELS
Model 2720 & 12720
AUGUST, 2012
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-2-6
AUGUST, 2011
REF. PARTNO. NO. QTY. DESCRIPTION
1 50028749 1 Shield w/ Decals2 50069500 1 Shield Mount Assy.3 50028835 1 Center Gearbox Shield4 50028493 1 Hinge Pin5 –––– 2 Flatwasher 7/16”6 21020406 2 Cotter Pin 1/8” x 3/4”7 –––– 2 Capscrew 3/8” x 1”8 9131200 2 Locknut 3/8”9 91443 1 Important Decal10 87340 1 Important Decal11 50028366 1 Warranty Decal12 ____ 4 Hex Nut 1/2”13 69391 1 Lynch Pin14 50029889 2 Model Decal, 2720
50067805 2 Model Decal, 12720
REF. PARTNO. NO. QTY. DESCRIPTION
15 50018166 4 Capscrew M10 x 2016 50038589 4 Capscrew w/ Patch M10 x 4517 44198 8 Lockwasher M1018 –––– 8 Flatwasher 3/8”19 50035829 1 Owner’s Manual Tube Assembly20 50035830 1 Manual Cap Seal21 N/A 1 Manual Holder Cap22 –––– 3 Capscrew 1/4” x 7/8”23 –––– 6 Flatwasher 1/4”24 –––– 3 Lockwasher 1/4”25 –––– 3 Hex Nut 1/4”26 50066174 1 Mount Bracket27 ____ 4 Lockwasher 1/2”28 ____ 4 Flatwasher 1/2”29 ____ 4 Capscrew 1/2” x 1-1/4” Gr.5
CENTER SHIELD ASSEMBLYModel 2720 & 12720
14
7
17 1815
26
2712
29 28
8
4
55
6
6161718
1321
19
202223
232425
3
1
11
9
10
2
AUGUST, 2011BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-2-7
DRIVELINE SHIELD CONE(REPLACES OLD STYLE METAL SHIELDING ON WING ASSEMBLIES)
Ref. Part Description Qty.No. No. Req’d.
1 50062093 Shield Cone Assy 12 ---------- Capscrew M10 x 1.5 x 20 43 ---------- Lockwasher M10 44 ---------- Flatwasher 3/8” 4
1
23
4
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-3-1
AUGUST, 2012
14
10
12
5 4
2
45
18
7
15
4
3
1
9
6
1
43
5, 13
8
7
1
54
3
3451
11
71202 TRANSFER GEARBOX ASSEMBLY – 540 RPMUsed on 2720
71203 TRANSFER GEARBOX ASSEMBLY – 1000 RPMUsed on 12720 & 12720 Shredder
REF. PARTNO. NO. QTY. DESCRIPTION
1 70796 6 Bearing2 76671 1 Casing3 50068116 4 Oil Seal4 70881 6 Snap Ring5 70752 6 Shim .36 76674 1 Gear, 24 Teeth (71202 Assembly)
76672 1 Gear, 20 Teeth (71203 Assembly)7 76673 2 Shaft 1-3/4” Z208 76672 2 Gear, 20 Teeth (71202 Assembly)
76674 2 Gear, 24 Teeth (71203 Assembly)9 76675 1 Shaft, 1-3/4” Z2010 76676 1 Cover11 44489BH 6 Capscrew M10 x 1.5 x 35 Gr.8.812 70181 2 Gas Plug 3/8”13 70753 6 Shim .4
70754 6 Shim .570755 6 Shim .6
14 80538 1 Vent Plug
AUGUST, 2011BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-3-2
50068697 CENTER GEARBOX ASSEMBLY MODEL 12720 & 12720 SHREDDER1000 RPM, Ratio 1.467:1 CCW Rotation
50068700 CENTER GEARBOX ASSEMBLY MODEL 2720540 RPM, Ratio 1:1.22 CCW Rotation
Mfd. by Comer
REF. PARTNO. NO. QTY. DESCRIPTION
22 70740 1 Shim23 70722 1 Snap Ring24 76634 1 Shim, 40.3 x 61.7 x 1.025 70753 1 Shim, 70.3 x 84.7 x 0.426 70754 1 Shim, 70.3 x 84.7 x 0.527 70755 1 Shim, 70.3 x 84.7 x 1.028 70345BH 1 Shim, 50.3 x 70.3 x 0.529 70346BH 1 Shim, 50.3 x 70.3 x 1.030 70347 1 Shim, 50.3 x 70.3 x 0.431 76664 1 Blank Washer32 70418 1 Castle Nut M3633 70419 1 Cotter Pin
REF. PARTNO. NO. QTY. DESCRIPTION
1 76821 1 Casting2 50056441 1 Gear, Output, 22 Teeth (50068697)
76667 1 Gear, Output, 18 Teeth (50068700)3 70796 2 Bearing4 50068116 1 Oil Seal5 76659 1 Input Shaft 1-3/4”6 70189 2 Snap Ring7 70752 2 Shim .3mm8 71538 1 Top Plate9 70586 1 Castle Nut10 70344 1 Shim .3mm11 70292 1 Oil Filler Plug 1/2” Gas12 44595BH 4 Capscrew M10 x 14 Gr.8.813 50053232 1 Bearing14 76661 1 Protective Washer15 50062245 1 Oil Seal16 70410 1 Bearing17 76823 1 Shaft, Output18 80538 1 Vent Plug19 71492 1 Cotter Pin B5 x 6020 70725 1 Cap21 50056442 1 Gear, Input, 15 Teeth (50068697)
76668 1 Gear, Input, 22 Teeth (50068700)
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-3-3
AUGUST, 2011
50068699 RH WING GEARBOX ASSEMBLY MODEL 12720 & 12720 SHREDDER1000 RPM, Ratio 1.222:1
50068702 RH WING GEARBOX ASSEMBLY MODEL 2720540 RPM, Ratio 1:1.053
Mfd. by Comer
REF. PARTNO. NO. QTY. DESCRIPTION
22 70740 1 Shim23 70722 1 Snap Ring24 76634 1 Shim, 40.3 x 61.7 x 1.025 70753 1 Shim, 70.3 x 84.7 x 0.426 70754 1 Shim, 70.3 x 84.7 x 0.527 70755 1 Shim, 70.3 x 84.7 x 1.028 70345BH 1 Shim, 50.3 x 70.3 x 0.529 70346BH 1 Shim, 50.3 x 70.3 x 1.030 70347 1 Shim, 50.3 x 70.3 x 0.431 76664 1 Blank Washer32 70418 1 Castle Nut M3633 70419 1 Cotter Pin
REF. PARTNO. NO. QTY. DESCRIPTION
1 76821 1 Casting2 76668 1 Gear, Output, 22 Teeth (50068699)
76882 1 Gear, Output, 19 Teeth (50068702)3 70796 2 Bearing4 50068116 1 Oil Seal5 76659 1 Input Shaft 1-3/4”6 70189 2 Snap Ring7 70752 2 Shim .3mm8 71538 1 Top Plate9 70586 1 Castle Nut10 70344 1 Shim .3mm11 70292 1 Oil Filler Plug 1/2” Gas12 44595BH 4 Capscrew M10 x 14 Gr.8.813 50053232 1 Bearing14 76661 1 Protective Washer15 50062245 1 Oil Seal16 70410 1 Bearing17 76823 1 Shaft, Output18 80538 1 Vent Plug19 71492 1 Cotter Pin20 70725 1 Cap21 76667 1 Gear, Input, 18 Teeth (50068699)
76883 1 Gear, Input, 20 Teeth (50068702)
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-3-4
AUGUST, 2011
50068698 LH WING GEARBOX ASSEMBLY MODEL 12720 & 12720 SHREDDER1000 RPM, Ratio 1.222:1 CCW Rotation
50068701 LH WING GEARBOX ASSEMBLY MODEL 2720540 RPM, Ratio 1:1.053 CCW Rotation
Mfd. by Comer
REF. PARTNO. NO. QTY. DESCRIPTION
22 70740 1 Shim23 70722 1 Snap Ring24 76634 1 Shim, 40.3 x 61.7 x 1.025 70753 1 Shim, 70.3 x 84.7 x 0.426 70754 1 Shim, 70.3 x 84.7 x 0.527 70755 1 Shim, 70.3 x 84.7 x 1.028 70345BH 1 Shim, 50.3 x 70.3 x 0.529 70346BH 1 Shim, 50.3 x 70.3 x 1.030 70347 1 Shim, 50.3 x 70.3 x 0.431 76664 1 Blank Washer32 70418 1 Castle Nut M3633 70419 1 Cotter Pin
REF. PARTNO. NO. QTY. DESCRIPTION
1 76821 1 Casting2 76668 1 Gear, Output, 22 Teeth (50068698)
76882 1 Gear, Output, 19 Teeth (50068701)3 70796 2 Bearing4 50068116 1 Oil Seal5 76659 1 Input Shaft 1-3/4”6 70189 2 Snap Ring7 70752 2 Shim .3mm8 71538 1 Top Plate9 70586 1 Castle Nut10 70344 1 Shim .3mm11 70292 1 Oil Filler Plug 1/2” Gas12 44595BH 4 Capscrew M10 x 14 Gr.8.813 50053232 1 Bearing14 76661 1 Protective Washer15 50062245 1 Oil Seal16 70410 1 Bearing17 76823 1 Shaft, Output18 80538 1 Vent Plug19 71492 1 Cotter Pin B5 x 6020 70725 1 Cap21 76667 1 Gear, Input, 18 Teeth (50068698)
76883 1 Gear, Input, 22 Teeth (50068701)
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-3-5
AUGUST, 2012
MODEL 2720 (540 RPM)50045696 TRANSFER GEARBOX ASSEMBLY. - 540 RPM
MFG. BY BONDIOLI & PAVESI
MODEL 12720 (1000 RPM)50045697 TRANSFER GEARBOX ASSEMBLY - 1000 RPM
MFG. BY BONDIOLI & PAVESI
1
4
5
6
14
2
8
9
12
14
6
5
7 7
1212
3
14
6
5
4
4
111013
14
3
6
5
4
REF. PARTNO. NO. DESCRIPTION QTY.
1 50066914 Top Cover 12 50066915 Drain Plug (Magnetic) 13 50066917 Output Shafts 1-3/4” 20 Spline 24 50066918 Oil Seal 45 50066919 Snap Ring 85 x 4mm 46 50066920 Shim Kit 47 70797 Bearing 35 x 72 x 18.25mm 28 50066922 Housing 19 50066923 Input Shaft 110 50066924 Breather Plug (Gas) 3/8” 111 50066925 Capscrew M10 x 22 x 1.5 C8.8 612 50066916 Gear Set for 540 RPM Gearbox 50045696 1
(Two 19 Tooth Gears and One 23 Tooth Gear)50066926 Gear Set for 1000 RPM Gearbox 50045697 1
(Two 23 Tooth Gears and One 19 Tooth Gear)13 50066135 Lockwasher, M10 614 70796 Bearing 4
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-4-1
REF. PARTNO. NO. QTY. DESCRIPTION
1 50053678 1 Yoke, CV 1-3/8”, 6 Spline2 50053677 2 Cross Bearing Kit3 50053691 1 Yoke4 50053727 1 Central Body5 50053715 1 Roll Pin6 50053690 1 Drive Tube, Outer7 66866 1 Flexible Roll Pin, Inner8 50053689 1 Yoke, Inner Tube9 50053688 1 Drive Tube, Inner10 50053723 1 Yoke, 1-3/4”, 20 Spline11 71399 1 Cross Bearing Kit
REF. PARTNO. NO. QTY. DESCRIPTION
12 50053711 Shield Support, Outer13 50053722 1 Shield Support14 71404 12 Screw, Self-Tapping15 71402 1 Shield Support, Inner16 50053709 6 Washer17 50053707 1 Shield Chain18 78786 1 Danger Decal, Outer Tube19 78608 1 Danger Decal, Shield20 50053721 1 Ball Collar Kit 1-3/8”21 50053705 1 Taper Pin Kit, 3 Pins22 50053687 1 Complete Shield
50053304SP CV DRIVESHAFT ASSEMBLY540 RPM, 1-3/8” – 6 Spline Tractor Yoke
ASAE Size 5Mfr: Bondioli & Pavesi
Model: 2720
2
5 18 7
1 4 3 6 9 8 10
11
17
151912
22
13
14
14 14
16
20
1
21
10
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-4-2
REF. PARTNO. NO. QTY. DESCRIPTION
1 50053683 1 Yoke, CV 1-3/8” 21 Spline2 50053677 1 Cross Bearing Kit3 50053728 1 Yoke4 50053727 1 Central Body5 50053715 1 Roll Pin6 71394 1 Drive Tube, Outer7 71397 1 Flexible Roll Pin, Inner8 71398 1 Yoke, Inner Tube9 50053682 1 Drive Tube, Inner10 50053723 1 Yoke, 1-3/4”, 20 Spline11 71399 1 Cross Bearing Kit12 50053711 Shield Support, Outer13 50053722 1 Shield Support
REF. PARTNO. NO. QTY. DESCRIPTION
14 71404 12 Screw, Self-Tapping15 71402 1 Shield Support, Inner16 50053709 6 Washer17 71447 1 Single Chain Restraint Collar18 50053708 2 Screw19 50053707 1 Shield Chain20 78786 1 Danger Decal, Outer Tube21 78608 1 Danger Decal, Shield22 50053721 1 Ball Collar Kit 1-3/8”23 50053705 1 Taper Pin Kit, 3 Pins24 50053686 1 Half Shaft, Outer, Shielded25 50053685 1 Half Shaft, Inner, Shielded26 50053684 1 Complete Shield
50053306SP CV DRIVESHAFT ASSEMBLY1000 RPM, 1-3/8” – 21 Spline Tractor Yoke
ASAE Size 5Mfr: Bondioli & Pavesi
Model: 12720
2
5 20 7
1 4 3 6 9 8 10
11
19
25
15
1818
17
2112
26
13
24
14
14 14
16
22
1
23
10
26
12 13
7
1616 16
5 6
11 1525
3 24
14
72A-4-3
271 2
32
3984
2021
1910
2322 1718
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
REF. PARTNO. NO. QTY. DESCRIPTION
1 50056927 1 Complete Collar Yoke (Tractor)2 50056400 2 Cross Journal Set3 76335 3 Grease Nipple4 76357 1 Wide Angle Double Yoke5 76896 1 Outer Yoke6 67108 1 Roll Pin For Outer Tube7 76897 1 Wiper8 76903 1 Complete Outer Tube9 50056401 1 Cross Journal Set10 76239BH 1 Complete Yoke11 76362 6 Screw Kit12 50056402 1 Bearing Ring13 50056403 1 Guard Retaing Collar for Outer Tube14 50056404 6 Bolt15 50056405 1 Guard Retaining Collar for Inner Tube16 64814 3 Safety Chain17 50056406 1 Guard Cone Set18 50056407 1 Complete Guard w/Inst. Man.19 76247 1 Tapered Pin Set 1-3/4”20 50056408 1 Female Tube w/ Yoke & Lube System21 50056409 1 Male Tube w/ Yoke & Lube System22 ––––– 1 Half Female Shaft w/ Guarding23 50056413 1 Half Male Shaft w/ Guarding24 78786 1 Danger Decal for Outer Tube25 78608 1 Danger Decal for Outer Guard Tube26 76899 1 Plastic Cap27 50017502 1 Kit Collar For Yoke 1-3/4”
50054670SP C.V. DriveshaftInput : 1-3/4” – 20 Spline, ASAE Size 5
Manufactured by Comer / EG12720 & 12720 Shredder (1000 RPM Model)
AUGUST, 2012
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-4-4
AUGUST, 2012
REF. PARTNO. NO. QTY. DESCRIPTION
1 76422 1 Complete Yoke2 50060543 2 Cross Journal Set3 76335 2 Grease Nipple4 76793 1 Splined Shaft5 66869 1 Roll Pin for Inner Tube6 67076 1 Inner Yoke7 76456 1 Complete Disc Clutch8 76247 2 Tapered Pin Set 1-3/4”9 44154BH 8 Lock Nut M1010 76080 8 Spring11 76164 1 Flanged Yoke12 76082 1 Bushing13 76083 4 Lining Ring14 76458 1 Clutch Support15 76085 2 Inner Plate16 76197 1 Intermediate Plate17 76086 1 Pressure Plate18 44159BH 8 Capscrew M10 x 1.5 x 10019 50060544 1 Inner Yoke without Roll Pin
50058538 DRIVESHAFT ASSEMBLY WITH CLUTCHCenter Driveshaft – ASAE Size 41000 RPM – 1-3/4” – 20 SplineManufactured by Comer / EG
Used on 2720 & 12720
8
9 10 1112 13
13
7
1315 17
1813161514
8
1 2 2
54
6193 3
AUGUST, 2012
72A-4-5
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
REF. PARTNO. NO. QTY. DESCRIPTION
1 76239BH 1 Complete Yoke2 76998 2 Cross Journal Set3 76335 2 Grease Nipple4 50061008 1 Complete Disc Clutch5 50056403 1 Guard Retaining Collar, Outer Tube6 50056404 6 Bolt7 50056405 1 Guard Retaining Collar, Inner Tube8 64814 2 Safety Chain9 50061018 1 Complete Guard10 44154BH 8 Lock Nut M1011 76247 2 Tapered Pin Set 1-3/4”12 76080 8 Spring13 76331 1 Flanged Yoke14 76082 1 Bushing15 76083 4 Lining Ring
REF. PARTNO. NO. QTY. DESCRIPTION
16 76458 1 Clutch Support17 76085 2 Inner Plate18 76197 1 Intermediate Plate19 76086 1 Pressure Plate20 44159BH 8 Capscrew M10 x 1.5 x 100 G8.821 76795 1 Female Tube w/ Yoke and Lube22 50061019 1 Male Tube w/ Yoke and Lube23 N/A 1 Half Female Shaft w/ Guarding24 N/A 1 Half Male Shaft w/ Guarding25 78786 1 Danger Decal, Outer Tube26 78608 1 Danger Decal, Outer Shield Tube27 78134 1 Outer Yoke28 67108 1 Roll Pin, Outer Tube29 50061006 1 Wiper30 50060546 1 Grease Fitting, Lube
50058539 DRIVESHAFT ASSEMBLY WITH CLUTCHWing Driveshaft – ASAE Size 51000 RPM – 1-3/4” – 20 SplineManufactured by Comer / EG
Used on 2720 & 12720
10 12 13
14
11
5
6 6
726
2728
8
212
2521
22
30
29
15 16 11 15 181517 17 19 2015
3 324
23 9
4
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-5-1
REF. PARTNO. NO. QTY. DESCRIPTION
1 50069922 1 Tongue Weldment2 50029719 2 Tongue Bushing3 88983 2 Tongue Pin4 –––– 4 Cotter Pin 3/16” x 2”5 20860 2 Capscrew 1” x 7-1/2”6 9163200 2 Locknut 1”7 50028859 2 Leveling Rod Weldment8 20886 1 Jam Nut 1-1/4”9 88460 1 Turnbuckle10 60636 2 Turnbuckle End11 –––– 2 Cotter Pin 3/16” x 1-1/2”12 14-32-49 2 Clevis Pin Weldment13 15908BH 4 Flatwasher 1”
REF. PARTNO. NO. QTY. DESCRIPTION
14 50028858 2 Leveling Rod Assembly (7–10)15 12031 1 Rod, Hose Holder16 –––– 1 Capscrew 5/8” x 2”17 –––– 1 Flatwasher 5/8”18 –––– 1 Lockwasher 5/8”19 –––– 1 Hex Nut 5/8”20 00779350 1 Jackstand Assembly21 50069926 1 Mount Pad22 –––– 2 Capscrew 3/4” x 5” Gr.523 –––– 2 Lockwasher 3/4”24 –––– 2 Hex Nut 3/4”25 91074 1 Safety Tow Chain26 D482 1 Warning Decal, Jack27 00779630 1 Bracket, Jack Weldment28 00779361 1 Washer, Jack
TONGUE, LEVELING RODS& RELATED PARTS
Used on Models 2720 & 12720(CURRENT STYLE)
16
17
18
19
15
14
7
89
10
12
12
11
11
2
63 4
4
1313
22
20
2324
21
15
2526
2728
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-5-2
AUGUST, 2012
REF. PARTNO. NO. QTY. DESCRIPTION
1 50029664 1 Tongue Weldment2 50029719 2 Tongue Bushing3 88983 2 Tongue Pin4 –––– 4 Cotter Pin 3/16” x 2”5 20860 2 Capscrew 1” x 7-1/2”6 9163200 2 Locknut 1”7 50028859 2 Leveling Rod Weldment8 20886 1 Jam Nut 1-1/4”9 88460 1 Turnbuckle10 60636 2 Turnbuckle End11 –––– 2 Cotter Pin 3/16” x 1-1/2”12 14-32-49 2 Clevis Pin Weldment13 15908BH 4 Flatwasher 1”14 50028858 2 Leveling Rod Assembly (7–10)15 12032 1 Hose Holder Assembly16 ---------- 1 Capscrew 5/8” x 2”
REF. PARTNO. NO. QTY. DESCRIPTION
17 ---------- 1 Flatwasher 5/8”18 ---------- 1 Lockwasher 5/8”19 ---------- 1 Hex Nut 5/8”20 50069930 1 Adjustable Mount (5 Position)21 50031362 1 Mount Pad22 ---------- 2 Capscrew 5/8” x 5”23 50070199 1 Jackstand Assembly24 ---------- 2 Lockwasher 5/8”25 ---------- 2 Hex Nut 5/8”26 50069933 1 Jack Storage Mount Adaptor27 ---------- 1 Locknut 1/2”28 ---------- 1 Capscrew 1/2” x 3-1/4” Gr.529 D762 1 Decal, Warning30 50070169 1 Jackstand Mount Kit31 91074 1 Safety Towing Chain
TONGUE, LEVELING RODS& RELATED PARTS
Used on Models 2720 & 12720(FOR EARLIER VERSIONS)
16
17
1819
1
5
14
7
89
10
12
12
11
11
2
63 4
4
1313
2220
23
27 26 28
2425 21
15
30
31
29
NOTE: If your machine has the Old StyleJack Mount like the illustration above, toreplace the Jack or the Mount you mustorder item 30, 50070169 Jack Mount Kit.
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-5-3
50031918BALL HITCH ASSEMBLYModels 2720 & 12720
5
69
7
8
8
12
3
4
10
REF. PARTNO. NO. QTY. DESCRIPTION
1 –––– 2 Lockwasher 5/8”2 –––– 2 Hex Nut 5/8”3 50031916 1 Ball Hitch Weldment4 50068048 1 2- 5/16” Ball Assy.5 –––– 2 Capscrew 5/8” x 6” Gr.56 –––– 2 Flatwasher 5/8”7 86356 1 Collar8 –––– 2 Capscrew 5/8” x 3 3/4” Gr.59 15516 2 Locknut 5/8”10 91589 1 Bushing
REF. PARTNO. NO. QTY. DESCRIPTION
1 86356 1 Collar2 –––– 2 Capscrew 5/8” x 3 3/4” Gr.53 15598BH 2 Locknut 5/8”4 50055486 1 Pin Weldment5 –––– 1 Capscrew 3/8” x 2-1/4”6 9131200 1 Locknut 3/8”7 50056888 1 Clevis Weldment8 50055447 1 Hitch Weldment9 50035874 1 Direction Decal10 50045639 1 Directon Decal11 97692 1 Patent Decal
50054505SPSWIVEL PIVOT HITCHModels: 2720 and 12720
6
6
5
2
2
1
311
10
9
3
47
8
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-5-4
AXLE ASSEMBLY(SWIVEL TURNBUCKLE)
Used on Models 2720 & 12720
REF. PARTNO. NO. QTY. DESCRIPTION
1 50053789 1 Center Axle2 50045238 1 Right Wing Axle3 50045237 1 Left Wing Axle4 50031212 2 Amber Reflector5 50031214 2 Red Reflector6 50021149 14 Spring Bushing 1-1/4”7 50029761 2 Pivot Pin 1” x 8.62”8 50029699 1 Pivot Pin 1” x 7.69”9 50028844 2 Long Center Axle Pin 1” x 10.5”10 50029760 2 Pivot Pin 1” x 9.88”11 –––– 7 Capscrew 3/8” x 2” Gr.512 20363 7 Locknut 3/8”
REF. PARTNO. NO. QTY. DESCRIPTION
13 50052742 2 Turnbuckle Assembly (14–18)14 50052745 2 Rod Eye, Threaded15 50052744 2 Rod Eye, Swivel16 50052743 2 Turnbuckle Body17 50052746 2 Lock Nut 1-1/4”18 50018372 8 Grease Fitting, M619 20063 4 Capscrew 1” x 6-1/2”20 50045257 8 Spacer .4721 9163200 4 Locknut 1”22 50038405 2 Lockwasher 1-1/4” 2-Piece Nord-Lock 1
23 15821 4 Lockwasher 1”24 50053737 1 Instruction Sheet
7
8
9
11, 12
11, 126
6
10
52
6
6
4
4
1
1919
17
16
14
13
18
15
20
11,12
11,12
6
6
6 6
6 7
5
3
21
21
2223
23
20
9
10 11,12
11,12
24
BUSH HOGAssemblyInstructions
1 Not included in 50047270 Turnbuckle Assembly.
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-5-5
AXLE ARM, SPINDLE & HUB ASSEMBLIESFor Models 2720 & 12720
REF. PARTNO. NO. QTY. DESCRIPTION
20 449BH 4 Grease Fitting21 14-6-243 6 Hub Cap22 7967 6 Seal23 50076BH 12 Bearing, Inner24 14-6-197 2 Bearing Cup25 –––– 6 Flatwasher 3/4”26 120BH 6 Slotted Hex Nut 3/4”27 –––– 6 Cotter Pin 1/8” x 1-1/2”28 50035756 6 Bearing Kit29 50029926 1 Tandem Axle, L.H.
50029925 1 Tandem Axle, R.H. (Not shown)30 50032483 2 Pin Weldment31 53065 2 Spiral Pin 3/8” x 2-1/2”32 50031928 2 Tandem Tube Assembly33 50041170 2 Tandem Spindle34 –––– 2 Capscrew 1/2” x 3-1/2”35 15554 2 Locknut 1/2”36 14-6-197 1 Bearing Cup37 14-6-198 1 Bearing Cup
REF. PARTNO. NO. QTY. DESCRIPTION
50035751 1 Dual Axle Assembly50035754 1 Single Axle Assembly, L.H.50035755 1 Single Axle Assembly, R.H.50035752 1 Tandem Axle Assembly, L.H.50035753 1 Tandem Axle Assembly, R.H.
1 50028533 4 Tube Assembly2 20363 4 Locknut 3/8”3 50028543 8 Spring Bushing 1-1/2”4 –––– 4 Capscrew 1/2” x 4-1/2” G85 –––– 6 Lockwasher 1/2”6 –––– 4 Hex Nut 1/2”7 20860 4 Capscrew 1” x 7-1/2”8 44524BH 4 Flanged Locknut 1”9 91152 4 Spring Cup10 91261 4 Rubber Cushion11 50035301 4 Spring12 50028461 4 Pivot Pin 1.5” x 7.50”13 –––– 4 Capscrew 3/8” x 2”14 50035750 2 Dual Spindle15 50035749 2 Single Spindle16 50035740 6 Hub Assembly17 50037354 1 Hub w/ Cups18 15515BH 5 Lug Nut 1/2”19 15445 5 Lug Bolt
8
9
11
3 4
3
3
15
3230
29313334 34
3535
5 5
33
14
3113
2
7
56
10
12
To convert wing axles from single axle to dual axle:Order Conversion Kit 50035759 for 2720 & 12720 Models.
27
28
24
24
2223
23
25
2621
16
1917 18
20
AUGUST, 2012
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
294SP SOLID TIREASSEMBLY
72A-5-6
5
3
2
1
4
67
REF. PARTNO. NO. QTY. DESCRIPTION
1 50051233BH 1 Tire 29 x 9.0 – 15 / 16 Ply2 50051234 1 Tube 9 x 153 50051235 1 Wheel Flange with Valve Hole4 50051236 1 Wheel Flange without Valve Hole5 –––– 10 Capscrew 1/2” x 1” Gr.56 –––– 10 Lockwasher 1/2”7 –––– 10 Hex Nut 1/2”8 50050727SP 1 Air Filled Airplane Tire
AIR FILLED AIRPLANE TIRE ASSEMBLYModel: 2720
8
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-5-7
FOAM FILLED AIRPLANE TIRE ASSY.26 x 6.6 x 14”
REF. PARTNO. NO. QTY. DESCRIPTION
1 50068834SP 1 Foam Filled Tire Assembly 26 x 6.6 x 14
1
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-6-1
REF. PARTNO. NO. QTY. DESCRIPTION
1 50036615 1 Front Baffle Weldment, R.H.50036614 1 Front Baffle Weldment, L.H.
2 50036613 1 Rear Baffle Weldment, R.H.50036612 1 Rear Baffle Weldment, L.H.
3 –––– 4 Capscrew 3/8” x 2”4 –––– 8 Flatwasher 3/8”5 –––– 4 Lockwasher 3/8”6 –––– 4 Hex Nut 3/8”7 5161614 6 Carriage Bolt 1/2” x 1-1/2”8 –––– 6 Lockwasher 1/2”9 –––– 6 Hex Nut 1/2”10 –––– 18 Capscrew 5/8” x 2”11 –––– 18 Flatwasher 5/8”12 –––– 18 Lockwasher 5/8”13 9162000 18 Locknut 5/8”14 50036625 2 Bearing Plate, Rear15 50034785 2 Special Washer16 50036628 2 Baffle Retainer, R.H.
50036629 2 Baffle Retainer, L.H.17 50034793 1 Rear Baffle Retainer, L.H.
50034795 1 Rear Baffle Retainer, R.H.18 50036627 1 Hinge Connector, L.H.
50036626 1 Hinge Connector, R.H.19 50036624 4 Bearing Plate, Center
BAFFLE KITFor 2720 Models
Note: Left side baffles shown
10
15
10
10
14
7
1 1816
10
10
19
19
34
456
111213
111213 8 9
211
171213
111213
111213
BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-6-2
AUGUST, 2012
REF. PARTNO. NO. QTY. DESCRIPTION
1 50042064 3 Cross Bar Assembly (Ref. #2–6)2 7919BH 2 Blade Bolt3 50040233BH 2 Blade, Straight Double Edge4 50041963 1 Cross Bar Weldment5 252BH 2 Jam Nut 1-1/8” NF6 –––– 2 Lockwasher 1-1/8”7 50041962 3 Nut Retainer8 50041961 3 Gearbox Nut9 44939BH 6 Carriage Bolt 3/8” x 2”10 –––– 6 Flatwasher 3/8”11 –––– 6 Lockwasher 3/8”12 9131200 6 Locknut 3/8” Gr. C13 50041989 1 Instruction Sheet
50041987 SHREDDER CROSS BAR KITUsed on 2720 Straight Bar Shredder Models:2720SSR, 2720SS, 12720SSR and 12720SS
BUSH HOGASSEMBLY
INSTRUCTIONS
13
5
6
2
1 3
4
Existing Straight BladeBar Shredder Assembly(See deck assemblies forthese parts)
9
8
7
121110
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-7-1
HYDRAULICS FOR 2720 & 12720 MODELSWHEN PLUMBING TO TRACTOR REMOTES
Ref. Part Description Qty.No. No.
1 99566 Wing Lift Cylinder 22 99567 Axle Control Cylinder 13 86266 Hydraulic Hose Assy. 250" 34 53340BH Adaptor 9/16 JIC to 3/4 SAE 3
24-6-434 Adaptor 9/16 JIC to 1/2 NPT 35 14-40-98 Elbow 90 degree 36 86500 Breather Plug 37 50068458 Restrictor, .078 Orfice 28 50033799 Stop Kit 19 12032 Hose Holder Assy 1
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-7-2
REF. PARTNO. NO. QTY. DESCRIPTION
1 95446 1 Clevis Cap2 95447 1 Rod Cap3 50017629 1 Piston4 N/A 1 Rod 1.375” Dia.5 95444 1 Cylinder Tube6 95445 4 Tie Rod7 95425 2 Pin 1” Dia.8 21020614 4 Cotter Pin 3/16” x 1 1/2”9 95433 1 Thread Lock10 95449 1 Rod Clevis 1.25” x 1”11 95422 1 Set Screw 3/8” x 1/2 Knurled12 95420 8 Hex Nut 5/8”13 95442 1 Hex Nut 1 1/8” UNF14 95435 1 Plug 3/4”15 50042072 1 Caution Decal16 50017625 1 Seal Kit
99566 HYDRAULIC CYLINDER, WINGMfd. by Monarch
4” Bore x 12” Stroke 1.375” Rod Dia.3/4”– 16 ORB Ports
87
112 13 3
156
5
2 12
4
10
14
16
8
119
7
Cylinder Assembly Part Number Stamped Here.
REF. PARTNO. NO. QTY. DESCRIPTION
1 95446 1 Clevis Cap2 95447 1 Rod Cap3 50017629 1 Piston4 N/A 1 Rod 1.375” Dia.5 95450 1 Cylinder Tube6 95427 4 Tie Rod7 95425 2 Pin 1” Dia.8 21020614 4 Cotter Pin 3/16” x 1 1/2”9 95433 1 Thread Lock10 95449 1 Rod Clevis 1.25” x 1”11 95422 1 Set Screw 3/8” x 1/2 Knurled12 95420 8 Hex Nut 5/8”13 95442 1 Hex Nut 1 1/8” UNF14 95435 1 Plug 3/4”15 50042072 1 Caution Decal16 50017625 1 Seal Kit
99567 HYDRAULIC CYLINDER, AXLEMfd. by Monarch
4” Bore x 8” Stroke 1.375” Rod Dia.3/4” – 16 ORB Ports
AUGUST, 2012BUSH HOG / LAND MAINTENANCE REPAIR PARTS MANUAL
72A-8-1
Ref. PartNo. No. Description Qty.
1 50031212 Amber Reflector 2 x 9 62 50031214 Red Reflector 2 x 9 23 50061049 Bush Hog Decal 24 D553 Warning Decal 15 D547 Danger Decal 16 D587 Lubrication Decal 17 87340 Important Decal 18 50028366 Warranty Decal 19 91443 Decal, Important 310 D559 Genuine BH Parts Decal 111 D549 Decal, Danger/Important 1
Ref. PartNo. No. Description Qty.
12 D548 Warning Decal (Overlay) 113 50029889 Model Decal, 2720 2
50067805 Model Decal, 12720 214 D555 Danger Decal 215 D614 Danger Decal 616 D552 Blade Rotation Decal CW 117 D551 Blade Rotation Decal CCW 218 D546 Decal, Danger, Missing Guard 319 D544 Important Decal 120 D565 Danger Decal 221 D813 Decal, Danger - Multilingual 1
50029936 DECAL KITFor Models 2720 & 12720
2501 GRIFFIN AVE. • SELMA, AL 36703(334) 872-6261 • (334) 874-2700PARTS ORDERING 1-800-304-2836
FAX 1-800-572-1784WWW.BUSHHOG.COM