5
SEBUTHARGA NO.: SH/18/2017 SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS ITEM NOS. CYBERSECURITY MALAYSIA’s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS CYBERSECURITY MALAYSIA’s RQMT LEVEL (See Note 1 ) PLEASE TICK IF BIDDER COMPLY (See Note 2) BIDDER’S REMARKS (INCLUDING DETAILS/REASONS AND ATTACHMENT) IF BIDDER DOES NOT COMPLY BIDDER’S REMARKS IF ANY (INCLUDING DETAILS AND ATTACHMENT) IN SUPPORTING THEIR COMPLIANCE STATEMENT Note 1 : CyberSecurity Malaysia’s Requirement Level :- M – Mandatory Requirement : These are ESSENTIAL/CRITICAL requirements that MUST be fully complied by Bidder. G – General Requirement : These are DESIRABLE requirements and Bidder is required to comply. I – For Info Only : These are information for the Bidder to take note and acknowledge. Note 2 : A blank (ie. no tick in this column) shall be taken as Bidder being in non-compliance for that particular line item unless otherwise specified. Page 1 of 5 A 1.0 1.1 1.2 1.3 GENERAL REQUIREMENTS SCOPE OF WORKS Bidder MUST fully comply with the scope of works, which include the supply, delivery, testing, commissioning, handover and acceptance of the hardware/software specified in Bill of Quantities and Price Schedules. The hardware/software shall be delivered (including appropriate packaging) to CyberSecurity Malaysia, Selangor, Malaysia. Bidder’s partial compliance to the said scope of works shall be disqualified. M M I 2.0 2.1 2.2 2.3 BIDDER’S RESPONSIBILITY Bidder MUST review this document and take full responsibility of obtaining information from CyberSecurity Malaysia as may require to meet the specifications and requirements. Bidder MUST review and fulfill all specifications and requirements before committing to sign the purchase agreement. Bidder MUST be the authorized representative of the hardware and software in Malaysia. Bidder MUST provide letter of confirmation or appointment from the original hardware and software manufacturer for our reference. M M M 3.0 3.1 3.2 DOCUMENTATION REQUIREMENTS All documentation shall be in English. Bidder shall be responsible for any translation cost incurred (if any) in regard to the submission of the documentation required by this sebutharga. CyberSecurity Malaysia reserves the right to reproduce all or part of the document submitted by the bidder for internal use. G G

SEBUTHARGA NO.: SH/18/2017 SCOPE OF WORKS, … · sebutharga no.: sh/18/2017 scope of works, technical specifications & requirements item nos. cybersecurity malaysia’s scope of

  • Upload
    vodien

  • View
    215

  • Download
    0

Embed Size (px)

Citation preview

SEBUTHARGA NO.: SH/18/2017

SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

ITEM NOS.

CYBERSECURITY MALAYSIA’s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

CYBERSECURITY MALAYSIA’s

RQMT LEVEL

(See Note 1 )

PLEASE TICK IF BIDDER COMPLY

(See Note 2)

BIDDER’S REMARKS (INCLUDING DETAILS/REASONS AND ATTACHMENT) IF

BIDDER DOES NOT COMPLY

BIDDER’S REMARKS IF ANY (INCLUDING DETAILS AND

ATTACHMENT) IN SUPPORTING THEIR

COMPLIANCE STATEMENT

Note 1 : CyberSecurity Malaysia’s Requirement Level :- M – Mandatory Requirement : These are ESSENTIAL/CRITICAL requirements that MUST be fully complied by Bidder. G – General Requirement : These are DESIRABLE requirements and Bidder is required to comply. I – For Info Only : These are information for the Bidder to take note and acknowledge. Note 2 : A blank (ie. no tick in this column) shall be taken as Bidder being in non-compliance for that particular line item unless otherwise specified.

Page 1 of 5

A

1.0

1.1

1.2

1.3

GENERAL REQUIREMENTS SCOPE OF WORKS Bidder MUST fully comply with the scope of works, which include the supply, delivery, testing, commissioning, handover and acceptance of the hardware/software specified in Bill of Quantities and Price Schedules. The hardware/software shall be delivered (including appropriate packaging) to CyberSecurity Malaysia, Selangor, Malaysia. Bidder’s partial compliance to the said scope of works shall be disqualified.

M

M I

2.0

2.1

2.2

2.3

BIDDER’S RESPONSIBILITY Bidder MUST review this document and take full responsibility of obtaining information from CyberSecurity Malaysia as may require to meet the specifications and requirements. Bidder MUST review and fulfill all specifications and requirements before committing to sign the purchase agreement. Bidder MUST be the authorized representative of the hardware and software in Malaysia. Bidder MUST provide letter of confirmation or appointment from the original hardware and software manufacturer for our reference.

M

M

M

3.0

3.1

3.2

DOCUMENTATION REQUIREMENTS All documentation shall be in English. Bidder shall be responsible for any translation cost incurred (if any) in regard to the submission of the documentation required by this sebutharga. CyberSecurity Malaysia reserves the right to reproduce all or part of the document submitted by the bidder for internal use.

G

G

SEBUTHARGA NO.: SH/18/2017

SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

ITEM NOS.

CYBERSECURITY MALAYSIA’s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

CYBERSECURITY MALAYSIA’s

RQMT LEVEL

(See Note 1 )

PLEASE TICK IF BIDDER COMPLY

(See Note 2)

BIDDER’S REMARKS (INCLUDING DETAILS/REASONS AND ATTACHMENT) IF

BIDDER DOES NOT COMPLY

BIDDER’S REMARKS IF ANY (INCLUDING DETAILS AND

ATTACHMENT) IN SUPPORTING THEIR

COMPLIANCE STATEMENT

Note 1 : CyberSecurity Malaysia’s Requirement Level :- M – Mandatory Requirement : These are ESSENTIAL/CRITICAL requirements that MUST be fully complied by Bidder. G – General Requirement : These are DESIRABLE requirements and Bidder is required to comply. I – For Info Only : These are information for the Bidder to take note and acknowledge. Note 2 : A blank (ie. no tick in this column) shall be taken as Bidder being in non-compliance for that particular line item unless otherwise specified.

Page 2 of 5

4.0

4.1

4.2

WARRANTY REQUIREMENTS The warranty MUST include both parts and labour for a period of two (2) years without any charge. Warranty period shall commence from the date of hardware/software commissioning and acceptance by CyberSecurity Malaysia.

M

G

5.0

5.1

5.2

5.3

DELIVERY REQUIREMENTS Successful bidder MUST be able to complete the entire scope of works within twelve (12) to fourteen (14) weeks after receipt of CyberSecurity Malaysia Letter of Acceptance (LOA). CyberSecurity Malaysia has the authority to reject any kind of bugs during or after installation (within the warranty period) and the replacement or any labour shall be done within the same day without any charges. Bidder MUST be responsible for any incidence occurred during transportation of the unit to CyberSecurity Malaysia.

M

G

M

6.0

6.1

6.2

BIDDER PAST EXPERIENCES Bidder shall have at least two (2) years experience in similar business. Bidder to provide list of client for reference.

G

G

SEBUTHARGA NO.: SH/18/2017

SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

ITEM NOS.

CYBERSECURITY MALAYSIA’s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

CYBERSECURITY MALAYSIA’s

RQMT LEVEL

(See Note 1 )

PLEASE TICK IF BIDDER COMPLY

(See Note 2)

BIDDER’S REMARKS (INCLUDING DETAILS/REASONS AND ATTACHMENT) IF

BIDDER DOES NOT COMPLY

BIDDER’S REMARKS IF ANY (INCLUDING DETAILS AND

ATTACHMENT) IN SUPPORTING THEIR

COMPLIANCE STATEMENT

Note 1 : CyberSecurity Malaysia’s Requirement Level :- M – Mandatory Requirement : These are ESSENTIAL/CRITICAL requirements that MUST be fully complied by Bidder. G – General Requirement : These are DESIRABLE requirements and Bidder is required to comply. I – For Info Only : These are information for the Bidder to take note and acknowledge. Note 2 : A blank (ie. no tick in this column) shall be taken as Bidder being in non-compliance for that particular line item unless otherwise specified.

Page 3 of 5

B

1.0

1.1

1.2

1.3

TECHNICAL SPECIFICATIONS & REQUIREMENT TECHNICAL SPECIFICATION Bidder’s proposal for the hardware system must be able to follow based-on the minimum specification or equivalent and features as below: 10G fiber transceiver § Quantity: 8 units § Specifications: To supply, install, configure, testing and commissioning 10G fiber

transceiver for existing brocade ICX 6450 switches § Support and Warranty: 2-Years On-Site Warranty inclusive of Parts and Labour

and 24 x 7 support coverage period/ 4 hrs. response time § Installation: The proposed hardware must be configured/installed by certified

engineer. Fiber patch cord LC-LC § Quantity: 8 units § Specifications: To Supply, install Fiber patch cord LC-LC (5 meters) § Support and Warranty: 2-Years On-Site Warranty inclusive of Parts and Labour

and 24 x 7 support coverage period/ 4 hrs. response time § Installation: The proposed hardware must be configured/installed by certified

engineer.

KVM Console Switch § Quantity: 1 unit § Specifications: To Supply, install, testing and commissioning KVM Console

switch. items shall consist of the following: - Ultra-Dense, High-Performance KVM Console Display and Keyboard. - KVM USB Adapter (8 units) - CAT5 Qty-8 12ft/3.7m Cable - KVM Console Interface Adapter supporting USB and Display Port

connectivity. - Supported 8 number of server port

§ Support and Warranty: 2-Years On-Site Warranty inclusive of Parts and Labour and 24 x 7 support coverage period/ 4 hrs. response time

§ Installation: The proposed hardware must be configured/installed by certified engineer.

M

M

M

SEBUTHARGA NO.: SH/18/2017

SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

ITEM NOS.

CYBERSECURITY MALAYSIA’s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

CYBERSECURITY MALAYSIA’s

RQMT LEVEL

(See Note 1 )

PLEASE TICK IF BIDDER COMPLY

(See Note 2)

BIDDER’S REMARKS (INCLUDING DETAILS/REASONS AND ATTACHMENT) IF

BIDDER DOES NOT COMPLY

BIDDER’S REMARKS IF ANY (INCLUDING DETAILS AND

ATTACHMENT) IN SUPPORTING THEIR

COMPLIANCE STATEMENT

Note 1 : CyberSecurity Malaysia’s Requirement Level :- M – Mandatory Requirement : These are ESSENTIAL/CRITICAL requirements that MUST be fully complied by Bidder. G – General Requirement : These are DESIRABLE requirements and Bidder is required to comply. I – For Info Only : These are information for the Bidder to take note and acknowledge. Note 2 : A blank (ie. no tick in this column) shall be taken as Bidder being in non-compliance for that particular line item unless otherwise specified.

Page 4 of 5

B

1.5

1.6

TECHNICAL SPECIFICATIONS & REQUIREMENT (Cont.) Compute Node Server § Quantity: 7 units § Specifications: To Supply, install, testing and commissioning Compute Node

Server (preferably HPE or equivalent): - 1 x 8Core 2.1Ghz Processor - Minimum Intel® Xeon E5 - Minimum 32GB Memory - 2 x 600Gb SAS 10K HDD - 1 x 4-Ports 1Gbe NIC (Embedded) - Dynamic Smart Array B140i, plus optional Flexible Smart Array or Smart

HBA controller - Redundant Power Supply - 1U Rackmount * SFP are excluded - ESET Antivirus - Operating System: RHEL Server or CentOS - iLO Management (standard), Intelligent Provisioning (standard), iLO

Advanced. § Support and Warranty: 2-Years On-Site Warranty inclusive of Parts and Labour

and 24 x 7 support coverage period/ 4 hrs. response time § Installation: The proposed hardware must be configured/installed by certified

engineer. Services § Installation, configuration, testing and commissioning for 10G fiber transceiver at

the existing brocade ICX 6450 switches and Fiber patch cord LC-LC § Integration work for network switch link between existing network switch and

Isilon Data Storage § Installation, configuration, commissioning of compute node server for Hadoop

Data Platform Framework § Configuration and integration of Data Lake Clustering, Hadoop management web

UI, User Access Module. § Integration work for existing data node and data storage § Integration work for existing Platform Monitoring System § Integration work for existing centralized security threats management console

M

M

SEBUTHARGA NO.: SH/18/2017

SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

ITEM NOS.

CYBERSECURITY MALAYSIA’s SCOPE OF WORKS, TECHNICAL SPECIFICATIONS & REQUIREMENTS

CYBERSECURITY MALAYSIA’s

RQMT LEVEL

(See Note 1 )

PLEASE TICK IF BIDDER COMPLY

(See Note 2)

BIDDER’S REMARKS (INCLUDING DETAILS/REASONS AND ATTACHMENT) IF

BIDDER DOES NOT COMPLY

BIDDER’S REMARKS IF ANY (INCLUDING DETAILS AND

ATTACHMENT) IN SUPPORTING THEIR

COMPLIANCE STATEMENT

Note 1 : CyberSecurity Malaysia’s Requirement Level :- M – Mandatory Requirement : These are ESSENTIAL/CRITICAL requirements that MUST be fully complied by Bidder. G – General Requirement : These are DESIRABLE requirements and Bidder is required to comply. I – For Info Only : These are information for the Bidder to take note and acknowledge. Note 2 : A blank (ie. no tick in this column) shall be taken as Bidder being in non-compliance for that particular line item unless otherwise specified.

Page 5 of 5

C

1.0

1.1

1.2

1.3

1.4

SUPPORT AND MAINTENANCE REQUIREMENT

VENDOR ASSISTANCE REQUIREMENT

Bidder is required to have an established technical support set-up in Malaysia.

Bidder must possess technical support personnel. Bidder to specify the number of personnel.

Bidder must provide technical support during weekend or public holiday.

Bidder is required to specify on any special requirement in order to provide onsite support.

M

M

M

G