Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Okopowa 780-819 Gdańsk
T (+48 58) 308 15 64F (+48 58) 308 15 61
Seatech Engineering LtdPoland
Shallow Water Passenger Vessel 18m is designed by Seatech Engineering Ltd designingteam. The main purpose of this project was creating a small passenger catamaran for shortvoyage with quite high speed on coastal area. Intended use of such vessel are pleasuretours from one touristic place to another as an alternative to land transport. This prerequi-site caused planning of seats number su@cient for such cluster which is typical for tourers.
Another assumption of this project was to design very convenient water bus, with silentpropulsion and reduced rolling and vibration for better passengers comfort.
Huge front glass wall gives an opportunity to see panorama from each seat inside passen-gers cabin. Moreover passengers cabin arrangement enables two handicapped voyage andgetting around.
The vessel is compliant also with land regulations concerning architecture which is reAectedin toilets number and passageways width in view of handicapped. Superstructure arrange-ment enables comfortable access to engine room while maintenance. This ergonomic ar-rangement of the vessel will give maximum comfort while utilization and satisfaction forpassengers and for crew.
ShallowWaterPassengerVessel18m
www.seatech.com.pl
Principal dimensionsLength o.a.: approx.18.50 mBreadth: 7,50 mDisplacement: 30 tDepth to the deck line: 2,0 mDraught: 1,4 mEngine power: 2 x (515-535) kWPropulsion: 2 x Hamilton Jets HJ364Speed: 25/27 knCrew : 3–4 personPassengers: 87 + 2 disableds
ShallowWaterPassengerVessel18m