Search Results - Springer

7/30/2019 Search Results - Springer

1/5


link.springer.com/search/page/2?facet-sub-discipline="Mechanical+Engineering"&query=internal+fin&facet-discipline="Engineering"&sortOrder=newest 1/5

71 Result(s) for'internal fin'within Engineering Mechanical Engineering Heat and Mass Transfer

Article

Thermodynamic analysis of a thermal storage unit under the influence of nano-

particles added to the phase change material and/or the working fluid

The thermal storage unit consists of two concentric cylinders where the working fluid flows through the

internal cylinder and the annulus is filled with a phase change material. The system carries out a cyclic...

Mehran Abolghasemi, Ali Keshavarz, Mozaffar Ali Mehrabian in Heat and Mass Transfer (2012)

Article

Optimization of solar air collector using genetic algorithm and artificial bee colony

algorithm

Thermal performance of solar air collector depends on many parameters as inlet air temperature, air velocity,

collector slope and properties related to collector. In this study, the effect of the different par...

Arzu encan ahin in Heat and Mass Transfer (2012)

Article

An experimental and numerical investigation of air side heat transfer and flow

characteristics on finned plate configuration

The finnedplate configuration, presented principally in Fig. 1, consists of two parallel clapboards withfins

between them and cross flow direction offins outside. Generally, the size ofinternalfins and that ...

Lihao Gu, Xiang Ling, Hao Peng in Heat and Mass Transfer(2012)

Article

Influence mechanism on flow and heat transfer characteristics for air-cooled steam

condenser cells

Forced draft fans are installed in the ACSC to ensure that the turbine exhaust flowing in the finnedtube

exchangers will be completely cooled by...V, divided by the ideal fan volume flow rate, V ...

Wei Feng He, Yi Ping Dai, Mao Qing Li, Qing Zhong Ma in Heat and Mass Transfer (2012)

Open Access
http://link.springer.com/article/10.1007/s00231-012-1012-zhttp://link.springer.com/search?facet-author=%22Lihao+Gu%22http://link.springer.com/search?facet-author=%22Xiang+Ling%22http://link.springer.com/search?facet-author=%22Hao+Peng%22http://link.springer.com/journal/231http://link.springer.com/article/10.1007/s00231-012-1017-7http://link.springer.com/article/10.1007/s00231-012-1038-2http://link.springer.com/article/10.1007/s00231-012-1038-2http://link.springer.com/article/10.1007/s00231-012-1039-1http://link.springer.com/search?facet-publication-title=%22Heat+and+Mass+Transfer%22&sortOrder=newestFirst&facet-sub-discipline=%22Mechanical+Engineering%22&query=internal+finhttp://link.springer.com/search?facet-publication-title=%22Heat+and+Mass+Transfer%22&sortOrder=newestFirst&query=internal+fin&facet-discipline=%22Engineering%22http://link.springer.com/search?sortOrder=newestFirst&facet-sub-discipline=%22Mechanical+Engineering%22&query=internal+fin&facet-discipline=%22Engineering%22http://link.springer.com/http://link.springer.com/http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Qing+Zhong+Ma%22http://link.springer.com/search?facet-author=%22Mao+Qing+Li%22http://link.springer.com/search?facet-author=%22Yi+Ping+Dai%22http://link.springer.com/search?facet-author=%22Wei+Feng+He%22http://link.springer.com/article/10.1007/s00231-012-1012-zhttp://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Hao+Peng%22http://link.springer.com/search?facet-author=%22Xiang+Ling%22http://link.springer.com/search?facet-author=%22Lihao+Gu%22http://link.springer.com/article/10.1007/s00231-012-1017-7http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Arzu+%C5%9Eencan+%C5%9Eahin%22http://link.springer.com/article/10.1007/s00231-012-1038-2http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Mozaffar+Ali+Mehrabian%22http://link.springer.com/search?facet-author=%22Ali+Keshavarz%22http://link.springer.com/search?facet-author=%22Mehran+Abolghasemi%22http://link.springer.com/article/10.1007/s00231-012-1039-1http://link.springer.com/search?sortOrder=newestFirst&facet-sub-discipline=%22Mechanical+Engineering%22&query=internal+fin&facet-discipline=%22Engineering%22http://link.springer.com/search?facet-publication-title=%22Heat+and+Mass+Transfer%22&sortOrder=newestFirst&query=internal+fin&facet-discipline=%22Engineering%22http://link.springer.com/search?facet-publication-title=%22Heat+and+Mass+Transfer%22&sortOrder=newestFirst&facet-sub-discipline=%22Mechanical+Engineering%22&query=internal+fin


2/5



Article

Heat flux determination for nucleate boiling in subsurface tunnel structures

The surfaces studied in the quoted works had horizontal internaltunnels, while these ones studied here have

... both horizontal (in the space between mainfins) and vertical tunnels, Fig. 5. It was assumed that ...

Robert Pastuszko, Mieczyslaw E. Poniewski, Monika Koziol in Heat and Mass Transfer (2012)

Article

Double tube heat exchanger with novel enhancement: part IIsingle phase

convective heat transfer

The enhanced tubes used in this study viz., Turbo-C (Copper Top Cross) and EXTEK (Twisted Multi-

Head) differ from the enhanced surfaces studied previously such as internally finnedtubes [6], tubes with

internal...

R. Tiruselvam, W. M. Chin, Vijay R. Raghavan in Heat and Mass Transfer (2012)

Article

Predict the temperature distribution in gas-to-gas heat pipe heat exchanger

A theoretical model has been developed to investigate the thermal performance of a continuous finned circular

tubing of an air-to-air thermosyphon-based heat pipe heat exchanger. The model has been used to det...

E. Azad in Heat and Mass Transfer (2012)

Article

Analysis of exergy and parametric study of a v-corrugated solar air heater

Solar air heaters (SAHs) are kinds of heat exchangers that transform solar energy into heat. They are usually

used for heating air in drying agricultural products and as an air heater in combination with auxil...

Mahdi Hedayatizadeh, Yahya Ajabshirchi, Faramarz Sarhaddi in Heat and Mass Transfer (2012)

Article

Effects of PM fouling on the heat exchange effectiveness of wave fin type EGR

cooler for diesel engine use

It is worth noting that as the outlet gas temperature drops, the condensed EGR gas reduces

NOX...emissions, which is a favorable phenomenon from the environmental point of view. These

experimental results indicat...

Sang-Hoon Jang, Se-Joon Hwang, Sang-Ki Park, Kap-Seung Choi in Heat and Mass Transfer (2012)
http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Kap-Seung+Choi%22http://link.springer.com/search?facet-author=%22Sang-Ki+Park%22http://link.springer.com/search?facet-author=%22Se-Joon+Hwang%22http://link.springer.com/search?facet-author=%22Sang-Hoon+Jang%22http://link.springer.com/article/10.1007/s00231-011-0950-1http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Faramarz+Sarhaddi%22http://link.springer.com/search?facet-author=%22Yahya+Ajabshirchi%22http://link.springer.com/search?facet-author=%22Mahdi+Hedayatizadeh%22http://link.springer.com/article/10.1007/s00231-011-0957-7http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22E.+Azad%22http://link.springer.com/article/10.1007/s00231-011-0960-zhttp://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Vijay+R.+Raghavan%22http://link.springer.com/search?facet-author=%22W.+M.+Chin%22http://link.springer.com/search?facet-author=%22R.+Tiruselvam%22http://link.springer.com/article/10.1007/s00231-012-0986-xhttp://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Monika+Koziol%22http://link.springer.com/search?facet-author=%22Mieczyslaw+E.+Poniewski%22http://link.springer.com/search?facet-author=%22Robert+Pastuszko%22http://link.springer.com/article/10.1007/s00231-011-0949-7


3/5



Article

Numerical analysis of heat and mass transfer in a compact finned tubes air heat

exchanger under dehumidification conditions

The two-dimensional continuity and momentum equations for air-flow are: 12 $$ \frac{{\partial u_{...

Riad Benelmir, Salim Mokraoui in Heat and Mass Transfer (2012)

Article

Double tube heat exchanger with novel enhancement: part Iflow development

length and adiabatic friction factor

Extended surfaces are routinely employed in compact heat exchangers, shell and tube heat exchanges and

double tube heat exchangers. Extended surfaces used with liquids may be on the inner surface (internal

microf...R. Tiruselvam, Vijay R. Raghavan in Heat and Mass Transfer (2012)

Article

Drug release from matrix systems: analysis by finite element methods

In this work some problems in drug delivery from solid systems were described in terms of transient mass

balances with diffusion and solved by using FEM. Firstly, the solving codes were compared with known

ana...

Ivan Galdi, Gaetano Lamberti in Heat and Mass Transfer (2012)

Article

Radiation effect on optimum design analysis of a constructal T-shaped fin with

variable thermal conductivity

A plenty of research works has been conducted considering variable thermal parameters for the individualfin

operating in practical situations. For example,...8] presented an analytical solution of the fin effici...

Dipankar Bhanja, Balaram Kundu in Heat and Mass Transfer (2012)

Article

Effect of void fraction and friction factor models on the prediction of pressure drop

of R134a during downward condensation in a vertical tube

The theoretical flow models of homogeneous and separated flow are applied to in-tube condensation to

predict the pressure drop characteristics of R134a. The homogeneous flow model is modified by ten different

...
http://link.springer.com/article/10.1007/s00231-011-0854-0http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Balaram+Kundu%22http://link.springer.com/search?facet-author=%22Dipankar+Bhanja%22http://link.springer.com/article/10.1007/s00231-011-0845-1http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Gaetano+Lamberti%22http://link.springer.com/search?facet-author=%22Ivan+Galdi%22http://link.springer.com/article/10.1007/s00231-011-0900-yhttp://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Vijay+R.+Raghavan%22http://link.springer.com/search?facet-author=%22R.+Tiruselvam%22http://link.springer.com/article/10.1007/s00231-011-0915-4http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Salim+Mokraoui%22http://link.springer.com/search?facet-author=%22Riad+Benelmir%22http://link.springer.com/article/10.1007/s00231-011-0916-3


4/5



A. S. Dalkilic, N. A. Krekci, S. Wongwises in Heat and Mass Transfer (2012)

Article

Experimental study on the heat transfer and pressure drop of a cross-flow heat

exchanger with different pinfin arrays

Pinfin arrays inside internalchannels are often used in heat exchanger ... transfer rate. A typical application

is the internalcooling of gas turbine blades. Short pinfins or long pinfins are used to suit th...

Isak Kotcioglu, Sinan Caliskan, Senol Baskaya in Heat and Mass Transfer (2011)

Article

Two phase flow and heat transfer characteristics of a separate-type heat pipe

The present experimental study provides design and operation information for practical engineering

applications. The following conclusions can be derived from the above experiments: (1) the filling ratio range

of...

Zhiwei Tang, Aijie Liu, Zhangyan Jiang in Heat and Mass Transfer (2011)

Article

Heat transfer and thermal management of electric vehicle batteries with phase

change materials

This paper examines a passive thermal management system for electric vehicle batteries, consisting of

encapsulated phase change material (PCM) which melts during a process to absorb the heat generated by a

bat...

M. Y. Ramandi, I. Dincer, G. F. Naterer in Heat and Mass Transfer (2011)

Article

Laminar heat transfer characteristics of internally finned tube with sinusoidal wavy

fin

The distributions of temperature difference between inside wall and fluid along the tube length are shown in

Fig. 8. For copper tube, the temperature difference between inside wall and fluid is higher at entrance...

M. Lin, L. Tian, Q. W. Wang in Heat and Mass Transfer (2011)

Article

Experimental investigation of the influences of shape and surface area on the EGR

cooler efficiency
http://link.springer.com/article/10.1007/s00231-010-0754-8http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Q.+W.+Wang%22http://link.springer.com/search?facet-author=%22L.+Tian%22http://link.springer.com/search?facet-author=%22M.+Lin%22http://link.springer.com/article/10.1007/s00231-010-0757-5http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22G.+F.+Naterer%22http://link.springer.com/search?facet-author=%22I.+Dincer%22http://link.springer.com/search?facet-author=%22M.+Y.+Ramandi%22http://link.springer.com/article/10.1007/s00231-011-0766-zhttp://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Zhangyan+Jiang%22http://link.springer.com/search?facet-author=%22Aijie+Liu%22http://link.springer.com/search?facet-author=%22Zhiwei+Tang%22http://link.springer.com/article/10.1007/s00231-010-0703-6http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Senol+Baskaya%22http://link.springer.com/search?facet-author=%22Sinan+Caliskan%22http://link.springer.com/search?facet-author=%22Isak+Kotcioglu%22http://link.springer.com/article/10.1007/s00231-011-0779-7http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22S.+Wongwises%22http://link.springer.com/search?facet-author=%22N.+A.+K%C3%BCrekci%22http://link.springer.com/search?facet-author=%22A.+S.+Dalkilic%22


5/5



The cooled EGR system is one of the most effective techniques currently available for reducing NOx

emissions. In this study, engine dynamometer experiments were performed to investigate the efficiencies of the

sh...

Sanghoon Jang, Sangki Park, Kapseung Choi, Hyungman Kim in Heat and Mass Transfer (2011)

Article

Optimization of an inclined elliptic impinging jet with cross flow for enhancing

heat transfer

Lee and Lee [7] performed an experimental study on the fluid flow and heat transfer characteristics under a

varying jet nozzle-to-plate spacing for an axisymmetric, submerged impinging air jet that was normal to ...

Man-Woong Heo, Ki-Don Lee, Kwang-Yong Kim in Heat and Mass Transfer (2011)

8,017,530 scientific documents at your fingertips

Springer, Part of Springer Science+Business M edia
http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Kwang-Yong+Kim%22http://link.springer.com/search?facet-author=%22Ki-Don+Lee%22http://link.springer.com/search?facet-author=%22Man-Woong+Heo%22http://link.springer.com/article/10.1007/s00231-011-0763-2http://link.springer.com/journal/231http://link.springer.com/search?facet-author=%22Hyungman+Kim%22http://link.springer.com/search?facet-author=%22Kapseung+Choi%22http://link.springer.com/search?facet-author=%22Sangki+Park%22http://link.springer.com/search?facet-author=%22Sanghoon+Jang%22

Documents

Search Results - Springer