Embed Size (px)
Citation preview
SeamlessAcousticalPlasterSolutions
2 www.cmsdanskin.co.uk
A seamless acoustical plaster solutionThe Fade® system is a high quality plastering solution that absorbs unwanted noise in a wide range of environments. As an acoustic solution applied to walls and ceilings, its highly absorbent qualities allow for optimum acoustic control in large, commercial spaces.
Fade® can be applied to virtually any surface including straight and curved walls, dramatic angles and arching domes offering a more flexible, discreet alternative to traditional acoustic solutions, such as suspended ceilings.
Available in a choice of finishes and exclusively through CMS Danskin Acoustics in the UK - Fade® Albus and Fade® Albus Plus offer greater flexibility over acoustic performance and interior design.
Offering unrivalled levels of sound absorption, the Fade® system leaves walls and ceilings clear of panels and other visible acoustic solutions. It is easy to repair, clean and maintain and has a proven track record of providing high performance sound absorption.
Moreover, the Fade® system is expertly supported from specification to installation by the highly experienced and local CMS Danskin Acoustics technical team and an approved installer network.
Benefits at a glance
ACOUSTICAcoustical data test
Up to AW:1.0 (Class A)
Tested at Sound Research Laboratories, UK
ACAS Accredited
FIREClass A Fire Rating
(A2s 1d0) per theEN 13501-1 standard
• Up to class ‘A’ acoustic absorption performance
• Quick to install, one mantle system
• Flexible to your design
• Easy to repair
• Smooth and white finish as standard
• Colour matching available
The Fade® system is the ideal specification for any internal area which needs seamless absorption combined with excellent aesthetics:
• Auditoriums, call centres and music venues: Helps shorten reverberation times and improve clarity
• Educational establishments: Helps achieve reverberation times laid down in Building Bulletin 93 (BB93)
• High end residential: Makes for a more comfortable acoustic climate particularly where timber and vinyl floors are used
• Restaurants, retail and hotel environments: The anti-static quality of Fade® is easy to clean and maintain
• Healthcare environments: Reduces reverberation and improves acoustics in clinical, clean and minimalist environments
• Leisure facilities: Ideal to reduce reverberation and improve acoustics, and can also be used in swimming pool environments
• Museums: Suitable for hard tiled floors and high traffic walkways. Fade® can reduce reverberation and improve acoustics
• Shopping Centres: Helps make a more enjoyable shopping experience by reducing reverberation and improving acoustics, particularly in high traffic areas
• Office environments: The use of the Fade® system in office environments can improve productivity and concentration
CLEANING & MAINTENANCE
Surface dust and dirt, andstains that have penetrated the
surface, can all be removed
3www.cmsdanskin.co.uk
COLOUR & LIGHT REFLECTANCE
Albus surface:NCS 0801-G82Y
Light reflectance value ashigh as 81%
The plaster is made from natural materials and the surface will
keep its natural colour
EMISSIONSThe plaster has been
honored with:
EM
ISSION CLASS FO
R B
UILDING MATERIA
L
Applications
4 www.cmsdanskin.co.uk
Acoustic Plaster FinishesThe Fade® system is offered in a choice of two finishes according to the absorption level required
Albus Plus
An ultra-smooth, fine grain white finish. Sanded or trowelled to achieve a highly aesthetic acoustic solution.
Albus
A lightly textured medium grain finish available in off white to suit design requirements.
Albus Plus Albus
The Fade® system can also be supplied in a choice of RAL or NCS colour options on request.
Please contact CMS Danskin Acoustics for further details.
Please note these samples are only representations of RAL colours as this brochure is printed from CMYK process.
Bespoke FinishesRAL 1005 RAL 1006 RAL 1007 RAL 1011 RAL 1012 RAL 3018 RAL 3020 RAL 3022 RAL 3024 RAL 3025 RAL 6010 RAL 6011 RAL 6012 RAL 6013 RAL 6014 RAL 7038 RAL 7039 RAL 7040 RAL 7042 RAL 7043
RAL 1000 RAL 1001 RAL 1002 RAL 1003 RAL 1004 RAL 3013 RAL 3014 RAL 3015 RAL 3016 RAL 3017 RAL 6005 RAL 6006 RAL 6007 RAL 6008 RAL 6009 RAL 7033 RAL 7034 RAL 7035 RAL 7036 RAL 7037
RAL 1013 RAL 1014 RAL 1015 RAL 1016 RAL 1017 RAL 3027 RAL 3031 RAL 4001 RAL 4002 RAL 4003 RAL 6015 RAL 6016 RAL 6017 RAL 6018 RAL 6019 RAL 7044 RAL 7045 RAL 7046 RAL 7047 RAL 8000
RAL 1024 RAL 1026 RAL 1027 RAL 1028 RAL 1032 RAL 4009 RAL 4010 RAL 5000 RAL 5001 RAL 5002 RAL 6026 RAL 6027 RAL 6028 RAL 6029 RAL 6032 RAL 8009 RAL 8011 RAL 8012 RAL 8014 RAL 8015
RAL 1018 RAL 1019 RAL 1020 RAL 1021 RAL 1023 RAL 4004 RAL 4005 RAL 4006 RAL 4007 RAL 4008 RAL 6020 RAL 6021 RAL 6022 RAL 6024 RAL 6025 RAL 8001 RAL 8002 RAL 8003 RAL 8005 RAL 8007
RAL 1033 RAL 1034 RAL 1037 RAL 2000 RAL 1001 RAL 5003 RAL 5004 RAL 5005 RAL 5007 RAL 5008 RAL 6033 RAL 6034 RAL 7000 RAL 7001 RAL 7002 RAL 8016 RAL 8017 RAL 8019 RAL 8022 RAL 8023
RAL 2002 RAL 2003 RAL 2004 RAL 2005 RAL 2007 RAL 5009 RAL 5010 RAL 5011 RAL 5012 RAL 5013 RAL 7003 RAL 7004 RAL 7005 RAL 7006 RAL 7008 RAL 8024 RAL 8025 RAL 8028 RAL 9001 RAL 9002
RAL 3000 RAL 3001 RAL 3002 RAL 3003 RAL 3004 RAL 5020 RAL 5021 RAL 5022 RAL 5023 RAL 5024 RAL 7015 RAL 7016 RAL 7021 RAL 7022 RAL 7023 RAL 9010 RAL 9011 RAL 9016 RAL 9017 RAL 9018
RAL 2008 RAL 2009 RAL 2010 RAL 2011 RAL 2012 RAL 5014 RAL 5015 RAL 5017 RAL 5018 RAL 5019 RAL 7009 RAL 7010 RAL 7011 RAL 7012 RAL 7013 RAL 9003 RAL 9004 RAL 9005 RAL 9006 RAL 9007
RAL 3005 RAL 3007 RAL 3009 RAL 3011 RAL 3012 RAL 6000 RAL 6001 RAL 6002 RAL 6003 RAL 6004 RAL 7024 RAL 7025 RAL 7030 RAL 7031 RAL 7032
40mm Fade® Albus Direct - NRC-1.01.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00125 250 500 1000 2000 4000
Absorptionclass
ap
aw
Frequency Hz
0.29 0.88 1.14 1.03 0.91 0.93 1.00 A
Abso
rptio
n co
effic
ient
25mm Fade® Albus Plus E200 - NRC-0.81.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00125 250 500 1000 2000 4000
Absorptionclass
ap
aw
Frequency Hz
0.34 0.76 0.75 0.72 0.88 0.84 0.85 B
Abso
rptio
n co
effic
ient
5www.cmsdanskin.co.uk
Acoustic PerformanceSound absorption coefficient Test information
25mm Fade® Albus Plus Direct - NRC-0.81.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00125 250 500 1000 2000 4000
Absorptionclass
ap
aw
Frequency Hz
0.15 0.69 0.62 0.88 0.92 0.78 0.80 B
Abso
rptio
n co
effic
ient
40mm Fade® Albus E200 - NRC-0.951.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00125 250 500 1000 2000 4000
Absorptionclass
ap
aw
Frequency Hz
0.47 0.87 0.94 1.00 0.97 0.94 1.00 A
Abso
rptio
n co
effic
ient
40mm Fade® Albus Plus E200 - NRC-0.851.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00125 250 500 1000 2000 4000
Absorptionclass
ap
aw
Frequency Hz
0.46 0.74 0.87 0.87 0.89 0.83 0.90 A
Abso
rptio
n co
effic
ient
40mm Fade® Albus Plus Direct - NRC-0.91.00
0.90
0.80
0.70
0.60
0.50
0.40
0.30
0.20
0.10
0.00125 250 500 1000 2000 4000
Absorptionclass
ap
aw
Frequency Hz
0.38 0.76 1.08 0.96 0.85 0.78 0.90 A
Abso
rptio
n co
effic
ient
6 www.cmsdanskin.co.uk
Installation and MaintenanceWith just 3 easy steps the Fade® system can be installed simply and quickly.
Step 02 Spraying and trowelling
Step 01 Boarding & filling
Step 03 Sanding to a finish
Surface dust and dirt can be vacuumed off using a soft brush attachment
Stains that have penetrated the surface and cannot be removed by the previous actions can be removed as follows:
01 - Apply a thin layer of the plaster to the imbedded stain
02 - Wait for the plaster to dry before you sand it
Cleaning & Maintenance
7www.cmsdanskin.co.uk
Traditional installation
Fibreglass board and Fade® applied to a plasterboard, concrete or timber substrate with approved adhesives or mechanically fixed with special washers. A mesh tape and plaster are applied to the plastic or aluminium C channel if fitted and to the joints of the pre-coated fibreglass board. The Acoustic Plaster is sprayed to a thickness 2-3mm then trowelled. Once dry if desired the plaster can be sanded to a finer finish.
Types of installationThe Fade® system can be installed in one of three ways:
Plaster directly to grid
The fibreglass board is attached to a MF metal drywall grid system or similar with the special washers. A mesh tape and plaster are applied to the plastic or aluminium C channel if fitted and to the joints of the pre-coated fibre Glass board. The Acoustic Plaster is sprayed to a thickness 2-3mm then trowelled. Once dry if desired the plaster can be sanded to a finer finish.
Previously painted surfaces
The substrate is tested for bond strength and cleaned. Alternatively if paint is flaking the mechanical fixings should be used. The fibreglass board is attached to the painted substrate with the approved adhesive and additionally secured with a minimal amount of special washers if required.
A mesh tape and plaster are applied to the plastic or aluminium C channel if fitted and to the joints of the pre-coated fibreglass board. The Acoustic Plaster is sprayed to a thickness 2-3mm then trowelled. Once dry if desired the plaster can be sanded to a finer finish.
01 02 03
PLEASE NOTE
While the above Fade® system can be applied to horizontal and vertical surfaces,it is not recommended to use Fade® within touching distance:
i.e. within 2.4m of standing floor level.
In all installations the fibreglass board is then sprayed with the Fade® system. Once dry the system can be sanded to achieve the desired finish.
The standard fibreglass board thicknesses are 25mm or 40mm. Other thicknesses are available on request.
CMS 04/17 Issue 1 - JW
For further informationplease contact our technical/sales team
Scotland - 01698 3560001 Netherton Road, Wishaw, North Lanarkshire ML2 0EQ
Central/Southern - 01925 577711Unit 2 Lyncastle Road, Appleton, Warrington WA4 4SN
All rights reserved. No part of this publication may be reproduced or transmitted in any form, or by any means, electronic or mechanical including photocopy, recording or any information storage and retrieval system, without permission in writing from SIG Trading Ltd. No information contained within this publication can be used to compile any other printed or electronic directory or mailing list. Whilst every effort has been made to ensure accuracy, the publisher does not, under any circumstances, accept responsibility for errors or omissions and no representation or warranty is made in relation to the suitability of a product for a specific application. Copying of the images contained in this publication, in any form without the author’s permission, is an unlawful act under the Copyright Designs and Patent Act 1988.
CMS Danskin products are part of the range
