SCREW COMPRESSORSBOGE screw compressor is very much based on the principles of nature. High outputs, effective oil separation, and an extremely long service life of the component parts

SCREW COMPRESSORS

BOGE AIR. THE AIR TO WORK.

For more than three decades BOGE screw compressors “Made in Germany” have stood the test of time: in industry and trade – from the one-man workshop to the automotive industry and the large refi neries. Today, BOGE screw compressors have much more to offer than just compressed air: state-of-the-art technology, a modular design concept and maximum energy effi ciency ensures that they meet the high reliability and effi ciency standards customers have come to expect from BOGE.

Over 100,000 compressed air users expect more when it comes to their compressed air supply.

BOGE air provides them with the air to work.


Screw Compressors

3

CONTENTS

SCREW COMPRESSORS 4

BOGE C SERIES 16

BOGE S SERIES 24

BOGE SERVICE 33

4 BOGE AIR. THE AIR TO WORK.

Nature does not waste energy. Our screw compressors are also built using this principle.

COOLINGAIRFLOW

Gravity

Thermal

Intelligent engineering from BOGE: The three main sections of the BOGE screw compressor (electrics & drive, compressor, independent cooling unit) are strategically aligned in the main cooling air fl ow: for maximum effi ciency and service life.

DRIVEELECTRONICS

AIREND

COOLINGSECTION

Screw Compressors

5

Warm air rises: Our engineers harnessed this simple law of physics in order to make BOGE

screw compressors even more effi cient and to

prolong their service life. Cooling air is taken in

at the lowest point in the package by a separate

cooling air fan and is drawn over the component

parts upwards before leaving the compressor at

the highest point – our so called chimney effect.

This main cooling air fl ow is many times higher

than the actual cooling air fl ow of the integrated

motor fan. Due to chimney principle, the system

keeps cooling even during load reversal.

Effi ciency advantage: The intake fi lter is positioned in the coolest part of the cooling

airfl ow and takes in the air for compression

at the lowest temperature. This results in an

optimized volumetric effi ciency and output from

the compressor. The air/oil cooler, on the other

hand, is positioned at the top of the compressor.

The cooler is generously dimensioned and, in

conjunction with the cooling airfl ow, provides for

the lowest possible internal cabinet temperature

as well as discharge compressed air temperature.

When connected directly to ducting, the cooling

air can be removed without any problems or

recovered and easily redirected to supplement

space heating.

Service life advantage: Motor, switch cabinet and all electric components are positioned

at the intake of the main cooling airfl ow and

benefi t from the coolest air. As a result these

components do not overheat either in load or

in idle mode which means their service life is

extended considerably. There are no heat sinks

within the cabinet in either operating mode.

Effi ciency made easy: According to our engineers, the design of the BOGE screw compressor is very much based on the principles of nature. High outputs, effective oil separation, and an extremely long service life of the component parts ensure that energy consumption is optimized.

THERMAL ADVANTAGE: THE BOGE COOLING AIR FLOW.

Oil always fl ows to the lowest point: Therefore our engineers have positioned the oil

pre-separator horizontally at the lowest point of

the system. Also due to rapid reduction of the

compressed air speed after compression bulk oil

”rains” from the compressed air into the reservoir

– a most effi cient form of oil pre-separation.

Effi ciency advantage: The BOGE oil separation system is designed to minimize internal pressure

losses and to ensure a residual oil content of

1-3 ppm in every operating phase. The

horizontal combi-tank ensures a low foam level

at load reversal virtually eliminating the risk of

bulk oil reaching the separator cartridges.

Long-life service advantage: BOGE oil separator cartridges have a long service life –

not only as a result of the highly effective oil

pre-separation but also because of the large

safety distance between the oil surface and the

separator that prevents the oil from migrating

into the separator cartridge.

GRAVITY ADVANTAGE: THE BOGE OIL SEPARATION SYSTEM.


Quality in its most effi cient form:The BOGE airend.

The heart of every BOGE screw compressor: The reliable and effi cient airend.

Screw Compressors

7

Everything is cutting edge: The BOGE airend is the heart of the BOGE screw compressor. Engineered to exacting tolerances, the BOGE airend combines quality and effi ciency with long service life making it one of the best of its kind and a sound, long-term investment for our customers.

Maximum reliabilityBOGE airends are manufactured on state-

of-the-art production lines and are examples

of the fi nest German engineering. Lowest

manufacturing tolerances combined with quality

materials ensures the dependability of each

airend. Computer controlled testing further

ensures that every single airend meets our high

quality standards. The longest possible service

life is also assured thanks to generously

dimensioned axial and radial bearings.

Suction end

Discharge end

Suction end

Discharge end

Discharge end

1

2

3

Suction end

Discharge end

Suction end

4

Maximum effi ciencyThe screw profi le of the BOGE airend has

been optimized using the latest technological

advancements providing maximum effi ciency

over the entire service life. We calculate the

best possible specifi c power characteristics

of each airend to ensure the best output per

kW or HP while ensuring the airend continuously

operates at its optimal speed.

PREMIUM QUALITY MADE IN GERMANY

1 Intake: The air passes through the intake opening into the rotors that are open on the suction side.

Compressing:

As the screw rotates the air intake opening closes. The volume in the chambers is reduced

and pressure increases. During this procedure, oil is injected to lubricate the rotor bearings,

to seal the rotors, and to dissipate the heat of compression.

Discharge:

Compression is completed, fi nal pressure is reached, and discharge starts.

2 3

4

THE COMPRESSION PROCEDURE


The BOGE control and monitoring concept is

your key to more effi cient operation. We have

the optimal control system for every type of

application: from monitoring central machine

parameters to specifi c synchronization of up

to 16 different compressors.

Optimized output: BOGE compressor controllers.

FOCUS FOCUS is the latest state-of-the-art energy

effi cient controller to come from BOGE. A

large-scale LC display clearly shows error and

maintenance messages, operating states and all

operating parameters. (Additionally the operating

status of a frequency controlled compressor

and/or the workload of fi xed speed compressors

are displayed).

Synchronized output: BOGE Master controllers.

TRINITYWith the trinity controller from BOGE you can control up to three compressors of equal or

different size or implement an automatic base

load switching control. The adjustable base

load switching cycle enables a constant load

operation of all the installed compressors. trinity can be installed into the compressor switch

cabinet or provided as a separate wall mounting

cabinet version.

AIRTELLIGENCE airtelligence is designed to control up to 16 compressors of different makes and sizes

in a multi-compressor system. It operates

by selecting the appropriate compressor

combination to meet the compressed air

demand and to profi ciently confi gure your

system to ensure best possible operating

INTELLIGENT CONTROL

Energy prices cannot be controlled. But energy effi ciency can.

effi ciency: load/idle run switch cycles are

minimized and expensive idle run times virtually

eliminated. airtelligence: For a cost-effective and safe operation!

AIRTELLIGENCE PROVIS Seeing is believing: airtelligence PROVIS synchronizes up to 16 compressors and

visualizes the central parameters. As a result

energy costs can be closely monitored via an

interface to a web server where you can view

this data at anytime and anywhere around the

world.

Screw Compressors

9

remodeling or design related modifi cations.

All pressures and intermediate pressures are

available with the best possible outputs.

It takes little or no investment for a compressed

air user to save as much as 30 percent of their

compressed air related energy costs. Be sure

to take advantage of BOGE’s energy effi ciency

solutions to save energy costs. Examples:

Leak detectionA single 1/4" diameter leaking hole causes

losses of 122 cfm – this equates to several

thousand dollars a year of energy costs.

Comprehensive leak detection from BOGE

will identify any leaks within your compressed

air network.

Heat recoveryMost of the energy used to generate

compressed air is rejected in the form of heat.

This heat can be recovered: e.g. for space

heating or for the heating of domestic water.

Up to 85 percent of the input electrical energy

can be recovered: Our energy experts will be

pleased to advise you!

AIReportDoes your compressor station still meet your

specifi c site requirements? Oversized or obsolete

components can be the source of high energy

costs. The AIReport system helps to detect weak

points within a compressed air system by

monitoring compressed air generation, treatment

and distribution over a set period of time (e.g.

one week, two weeks or even a month): this tool

will help you save energy!

INTELLIGENT SAVINGS

Energy costs need not go off course: because BOGE’s energy effi ciency solutions offer a number of options that save energy. It is calculated that energy costs account for around 75 percent of the lifetime costs of compressed air generation. This makes energy optimization essential for any compressed air user. Signifi cant sustainable savings can be created by continually auditing and optimizing your installation. You should therefore rely on a partner who, as an energy expert, is ready and able to support you before and after your decision to purchase compressed air products. Welcome to BOGE!

Perfectly controlled output: BOGE frequency controlled screw compressors

When there is a fl uctuating compressed air

demand, the BOGE frequency controlled screw

compressors works strictly in accordance with

the compressed air demand by producing the

exact volume of compressed air at the pressure

required.

The volume fl ow is continually adjusted between

25 and 100 percent – correctly specifi ed

frequency controlled compressors should

eliminate expensive idling times and even out air

demand fl uctuations. Energy costs can therefore

be reduced considerably.

When a frequency controlled compressor is used

alongside a fi xed speed compressor additional

advantages can be achieved. The fl exible speed

adaptation of the airend also allows for pressure

adaptation. Changing the pressure value of the

frequency compressor automatically

synchronizes the output quantity. A 190 psig

machine can therefore be transformed into a

125 psig machine yielding a correspondingly

higher output – without any expensive

The BOGE sign for effi cient compressed air solutions: Wherever it is displayed, users can be assured of a particularly effi cient BOGE

solution helping to save a great deal of money!

Savings potential of up to 30 % is possible with a frequency controlled

compressor:

• minimized idling time

• pressure reduction

• load cycles virtually eliminated.


Why don’t our compressors cost less? Because our customers can‘t afford that.

QUALITY PAYS OFF

Purchase costs represent only a small portion of a compressors life cycle investment costs. Because BOGE compressors are designed to provide trouble-free and effi cient operation for a long period of time, they are in many cases the most cost effective solution below the line. It is therefore not without good reason that users around the world increasingly rely on premium quality made by BOGE!

investment costs

approx. 15 %

Your BOGE advantage: More than a third of potential savings with regard to energy and maintenance costs are due to high quality components and effi cient solutions!

maintenance and repair

approx. 10 %

energy costs

approx. 75 %

Screw Compressors

11

German engineeringThe use of high quality materials and a reduced

number of wearing parts makes the BOGE product

as effi cient and reliable as our demanding

customers rightfully expect. The entire BOGE

production process is subject to permanent

quality control – from inspection of incoming

material to fi nal inspection and testing – with

all positions closely monitored by experienced

quality offi cers. And when it comes to product

development, BOGE ranks among the fi rst for

German engineering: Repeatedly our innovations

are considered as industry trendsetters and are

often protected by Worldwide patents.

Strict guidelines The prototypes of newly developed BOGE

products are subjected to all kinds of practical

tests. For example fatigue tests under extreme

conditions are carried out to determine the

product‘s readiness for the market prior to

release for series production. No BOGE product

leaves the Bielefeld facility without completing a

personal fi nal inspection protocol. This document

has to be signed off by our employee.

Permanent optimizationAll BOGE products are subject to permanent

quality audits and assessed according to the

latest industry standards and practical

experience – which translates into continuous

improvement for the benefi t of our customers.

You are welcome to contact our energy effi ciency

experts for more details on how to realize

additional savings potentials in your compressed

air system. Use the BOGE AIReport or carry out

leak detection in order to save ready cash:

Please do not hesitate to contact us!

Industry and Trade deserve quality solutions: And, our customers have come to rely on BOGE for uncompromising quality and intelligent engineering “Made in Germany”. More than 100,000 compressed air users around the world know that such values pay off in the long run: because a reliable, effi cient and durable supply of compressed air is paramount to the operation of their business.


Compact experts

The BOGE C series: Screw compressors compact as never before: All components in one module – extremely silent and fl exible, extendable for small and medium compressed air demands.

Screw Compressors

13

Powerful specialists

The BOGE S series:Powerful, effi cient and reliable screw compressors for medium and bigger compressed air demands – extendable due to modular design.


Compressed air with a method: Modules of BOGE screw compressors.

Screw compressor

Compressed air receiver Refrigerant dryer Frequency control

ADVANTAGES OF THE COMPACT MODULAR DESIGN:

• Flexible combination possibilities

• Unit completely ready for connection

• Minimum fl ow losses due to compact construction

• High-quality piping protects against leakages

Screw Compressors

15

Modular design, compact system: Because of the modular design BOGE screw compressors allow for individual confi guration of your compressed air system. Each compact module is pre-assembled and ready for use: for effi cient and reliable operation in all types of applications.

PERFORMANCE OVERVIEW OF THE S SERIES

HP

20

15

10

7.5

5.5

4

3

kW

15

11

7.5

5.5

4

3

2.2

HP

480

430

340

270

220

180

150

125

100

90

75

60

50

40

30

25

20

15

10

kW

355

315

250

200

160

132

110

90

75

65

55

45

37

30

22

18.5

15

11

7.5

S

15

10

S

29-2

24-2

20-2

S

60-2

50-2

40-2

S

100-2

75-2

61-2

S

150

125

101

S

220

180

151

SF

150

SF

29-2

24-2

SF

15

SF

100-2

SLF

75

61

51

40

30

SLF

125

101

frequency controlled

frequency controlled

PERFORMANCE OVERVIEW OF THE C SERIES

C

9

CL

20

10

7.5

5

4

CL-

20

10

7.5

5

4

CLD-

20

10

7.5

5

4

SLF

271

221

S

341

271

SF

60-2

40-2


Compressor output more space saving than ever: Design advantages of the BOGE C series.

THE CM COMPACT MODULE:

All necessary components are integrated into the airend block. Maintenance and wearing parts are easily accessible – for maximum comfort and highest operational safety.

Integrated oil separating systemBoth oil separating cartridge and oil fi lter

cartridge are easily accessible: for maintenance

purposes only the cover needs to be opened.

The oil sump is located at the lowest point: for

effective pre-separation according to the gravity

principle.

Multifunctional intake control with integrated solenoid valve for functionally reliable operation without leakages.

Silenced intake fi lter with paper fi lter cartridgeThe fi lter separates 99.9 percent of all particles

larger than 3 µm: assuring high quality

compressed air right at its source.

BOGE airend with special BOGE profi le and HD bearingThe specially designed airend is characterized

by its high output and low energy consumption.

Temperature sensor

CNC machined cast iron housingHigh quality machining eliminates the risk

of leakage. The heavy cast iron housing also

serves to reduce noise right at the source. Thermo-static oil level regulation Easily accessible from the outside.

* Minimum pressure / check valveIntegrated design

eliminates piping

– for maximum

leakage safety.

Minimum pressure / check valve*

C Series Screw Compressors

17

Flexible driveThe C series compact module can be supplied

with a drive of your choice – direct drive or belt

drive. You are welcome to contact us to work out

an optimal solution to meet your requirements!

Electric motor drive (50 or 60 Hz)

Hydraulic drive

Combustion engine

Cardan shaft (universal joint)

Compact is fi rst class: Due to their compact design, C series screw compressors are ideally suited for small spaces – optimal for use in stationary machines or for mobile use in vehicles. There are a number of possible options – from variable drives to dryers and frequency control – our machines can be individually confi gured to meet most requirements. Very quiet in operation! Really, you can scarcely hear them: an intelligent compact system to meet the most demanding installation requirements.

COMPACT DESIGNIntegration of all essential components

eliminates the need for interconnecting pipes.

Leakages are virtually eliminated. Pressure

losses are minimized.

EXTREMELY SILENTThe C series is very quiet in operation and

absolutely vibration less. Because of the sound

adsorbing graphite cast no further silencing is

required.

INTELLIGENT LAYOUTAll maintenance and wearing parts are easily

accessible from the outside via a single cover

– allowing fast and trouble-free maintenance.

From CL 10 available with exterior oil separator

cartridge.


Compact module CMCompact module with different drive options

Screw compressor CLCompact screw compressor

Effective free air delivery: 12 – 106 cfm, 0.34 – approx. 3 m³/minPressure range: 75 – 190 psig, 5 –13 barMotor range: 3 – 29 HP, 2.2 – 22 kW

Effective free air delivery: 11 – 77 cfm, 0.310 – 2.17 m³/minPressure range: 125 and 150 psig, 8 and 10 barMotor range: 4 – 20 HP, 3.0 – 15 kW

Compact module CMScrew compressors CL 4 to CL 20


19

BOGEModel

Max. pressure Effective freeair delivery* 60 Hz

Motor power Dimensions W x D x H

Weight

psig bar cfm m3/min HP kW inches lbs.CL 4 150 10 11 0.31 4.0 3.0 3-phase 30 x 19 x 19 243

CL 5 150 10 14 0.40 5.5 4.0 3-phase 30 x 19 x 19 276

CL 5 150 10 14 0.40 5.5 4.0 single-phase 33 x 19 x 19 287

CL 7.5 125 8 30 0.85 7.5 5.5 3-phase 30 x 19 x 19 287

CL 7.5 125 8 30 0.85 7.5 5.5 single-phase 33 x 19 x 19 298

CL 10 150 10 36 1.03 10.0 7.5 3-phase 46 x 23.5 x 23.5 573

CL 20 150 10 77 2.17 20.0 15.0 3-phase 52.5 x 24 x 25.5 661

* Free air delivery for the complete package in accordance with ISO 1217, Appendix E, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure values from 61 dB(A) according to DIN EN ISO 2151:2009


Compressor system CL-Receiver mounted screw compressor

Compressed air center CLD-Receiver mounted screw compressor and refrigerant dryer

Compressor system CL 4- to CL 20-Compressed air center CLD 4- to CLD 20-

Effective free air delivery: 11 – 77 cfm, 0.310 – 2.17 m³/minPressure range: 125 and 150 psig, 8 and 10 barMotor range: 4 – 20 HP, 3.0 – 15 kW


21

BOGEModel



Weight

psig bar cfm m3/min HP kW inches lbs.CL 4- 150 10 11 0.31 4.0 3.0 3-phase 48 x 28.75 x 43 547

CL 5- 150 10 14 0.40 5.5 4.0 3-phase 48 x 28.75 x 43 580

CL 5- 150 10 14 0.40 5.5 4.0 single-phase 48 x 28.75 x 43 591

CL 7.5- 125 8 30 0.85 7.5 5.5 3-phase 48 x 28.75 x 43 591

CL 7.5- 125 8 30 0.85 7.5 5.5 single-phase 48 x 28.75 x 43 602

CL 10- 150 10 36 1.03 10.0 7.5 3-phase 67 x 28.75 x 48 998

CL 20- 150 10 77 2.17 20.0 15.0 3-phase 67 x 28.75 x 48 1086


BOGEModel



Weight

psig bar cfm m3/min HP kW inches lbs.CLD 4- 150 10 11 0.31 4.0 3.0 3-phase 48 x 28.75 x 43 560

CLD 5- 150 10 14 0.40 5.5 4.0 3-phase 48 x 28.75 x 43 604

CLD 5- 150 10 14 0.40 5.5 4.0 single-phase 48 x 28.75 x 43 615

CLD 7.5- 125 8 30 0.85 7.5 5.5 3-phase 48 x 28.75 x 43 618

CLD 7.5- 125 8 30 0.85 7.5 5.5 single-phase 48 x 28.75 x 43 629

CLD 10- 150 10 36 1.03 10.0 7.5 3-phase 67 x 28.75 x 48 1093

CLD 20- 150 10 77 2.17 20.0 15.0 3-phase 67 x 28.75 x 48 1206



C 9

Effective free air delivery: 32 – 45 cfm, 0.90 – 1.27 m³/minPressure range: 115 – 190 psig, 8 – 13 barMotor range: 10 HP, 7.5 kW

EFFICIENCYThe specially designed BOGE

airend provides high output

volumes at low energy

consumption – for reliable and

effi cient compressed air supply.

CONTROLThe BOGE FOCUS control is the

standard compressor control and

provides numerous control and

monitoring features.

EXTREMELY QUIETAll C series compressors are

characterized by very low sound

pressure levels due to their super-

silenced cabinets.

Screw compressor C 9


23

Compact, effi cient, very quiet: The space saving C series screw compressors are designed for long-term performance. A refrigerant dryer mounted on a horizontal receiver is available as an option. Even at full load operation the compressor operates reliably and safely at optimum effi ciency providing a long service life.

BOGEModel

Max. pressure** Effective free air delivery* Motor power Dimensions W x D x H

Weight

psig bar cfm m3/min HP kW inches lbs.

C 9 115 7 45 1.27 10.0 7.5 19 x 27.7 / 35.7 x 37.6 474

C 9 115/125 8/8.6 42 1.20 10.0 7.5 19 x 27.7 / 35.7 x 37.6 474

C 9 150 10 39 1.10 10.0 7.5 19 x 27.7 / 35.7 x 37.6 474C 9 190 13 32 0.90 10.0 7.5 19 x 27.7 / 35.7 x 37.6 474

* Free air delivery for the complete package in accordance with ISO 1217, Appendix E, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure values from 59 dB(A) according to DIN EN ISO 2151:2009 ** Max. pressure of the compressor


24

Powerful in every detail: The design advantages of the BOGE S series.

INTAKE FILTER WITH PAPER MICROFILTER INSERTquietly intakes air from the cool section of

the cooling air fl ow while at the same time

intensively cleans it to ensure the longest

possible service life of all downstream

components. The compressor operates

trouble-free even in dusty conditions.

MULTIFUNCTIONAL INTAKE CONTROLensures a valve-less oil circuit without oil stop

or check valve and the lowest possible internal

pressure losses. It hermetically seals to prevent

discharge of oil vapors. A fully unloaded start

helps to save energy. The Multifunction control

is effectively safe in operation and in the event

of shutdown fails safe.

AIREND WITH ELECTRIC MOTORThe airend is driven by a class F, TEFC standard

motor which is located in the coolest section of

the compressor. BOGE motors have genuine

power reserves and are therefore not

overloaded.

S series screw compressors

25

Intelligent design advantage: The award winning BOGE S series design incorporates a clever cabinet layout with a high quality fi nish and maximum effi ciency. Every component part incorporates the decade long know-how of our engineers – advantages paid back through reliable daily operation.

EASY MAINTENANCEAll maintenance parts are easily accessible

from one side of the compressor. This reduces

maintenance costs to a minimum.

INTEGRATED SWITCH CABINETThe switch cabinet is integrated into the screw

compressor housing. It is fully pre-wired and

ready for use. The cabinet also houses a quick fi t

modular microprocessor compressor controller.

INTERNAL PIPEWORKAll oil carrying pipes are made of steel

terminating with high quality precision threaded

joints that are leak proof and safe even under

highest pressures. The entire machine utilizes

only one hose on the clean air side which also

serves for vibration damping.

OPTIONAL WATER COOLINGThe larger high volume BOGE screw

compressors are available as water cooled

(40-350 HP).

COOLER SECTIONThe self-suffi cient section, where the highest

cooling air temperatures occur, is located at the

top of the compressor in the cooling air discharge

and houses a generously dimensioned aftercooler

with separate cooling air fan and cooling air

guiding hood. The cooling air either discharges

to the atmosphere or ideally, as heat recovery,

to supplement space heating via ducting.

BOGE SAFETY OIL SEPARATION SYSTEMIncludes horizontal oil separation reservoir,

directly mounted airend and external oil separator

cartridge. This innovative system ensures oil

separation with virtually no pressure losses and

a residual oil content of only 1-3 ppm in every

operating phase. The external oil separator

cartridge is minimally loaded: a guarantee for

long service life.


Effective free air delivery: 32 – 129 cfm, 0.91 – 3.64 m³/minPressure range: 115 – 190 psig, 8 – 13 barMotor range: 10 – 30 HP, 7.5 – 22 kW

DECOUPLED UNITA sub-frame mounted on vibration

damping feet prevents transmission

of structure borne sound.

A rigid basic frame allows easy

transportation by forklift truck.

VALVE-LESS OIL CIRCUITThe BOGE screw compressor is

designed with a valve-less oil

circuit eliminating the need for oil

stop or check valves. This function

provides maximum operating

safety.

HORIZONTAL OIL RESERVOIRFor long service life and high

compressed air quality! The oil

separation reservoir tank is located

in the lowest section of the machine

and here rapid oil pre-separation

takes place before the compressed

air enters the external oil separator

cartridge.

Screw compressor S 10 to S 29-2






27

Dependable output: BOGE S series screw compressors are designed for fl exible and reliable operation in every situation. These industrial compressors can be tank mounted with or without a dryer. The high quality workmanship and effi cient compact design stand for high operating safety and maximum effi ciency.

BOGEModel

Max. pressure Effective free air delivery*

Motor power Dimensionssuper-silenced

W x D x H

Dimensionsultra-silenced

W x D x H

Weightsuper-silenced

Weightultra-silenced

psig bar cfm m3/min HP kW inches inches lbs. lbs.S 10 100 7 44 1.24 10 7.5 37 x 27.5 x 38.5 37 x 27.5 x 47.5 516 549

115/125 8/8.6 42 1.18 10 7.5 37 x 27.5 x 38.5 37 x 27.5 x 47.5 516 549

150 10 38 1.06 10 7.5 37 x 27.5 x 38.5 37 x 27.5 x 47.5 516 549

190 13 32 0.91 10 7.5 37 x 27.5 x 38.5 37 x 27.5 x 47.5 516 549

S 15 100 7 62 1.75 15 11.0 37 x 27.5 x 38.5 37 x 27.5 x 47.5 604 637

115/125 8/8.6 58 1.65 15 11.0 37 x 27.5 x 38.5 37 x 27.5 x 47.5 604 637

150 10 51 1.45 15 11.0 37 x 27.5 x 38.5 37 x 27.5 x 47.5 604 637

190 13 44 1.25 15 11.0 37 x 27.5 x 38.5 37 x 27.5 x 47.5 604 637

S 20-2 100 7 94 2.67 20 15.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 752 807

115/125 8/8.6 91 2.57 20 15.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 752 807

150 10 80 2.24 20 15.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 752 807

190 13 67 1.90 20 15.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 752 807

S 24-2 100 7 113 3.20 25 18.5 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 807 858

115/125 8/8.6 108 3.05 25 18.5 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 807 858

150 10 94 2.66 25 18.5 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 807 858

190 13 80 2.26 25 18.5 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 807 858

S 29-2 100 7 129 3.64 30 22.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 858 909

115/125 8/8.6 122 3.45 30 22.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 858 909

150 10 110 3.11 30 22.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 858 909190 13 91 2.57 30 22.0 47.5 x 33.5 x 45.5 47.5 x 33.5 x 59 858 909



Compressor system S-Screw compressormounted on horizontal receiver

Compressor system S 10- to S 29-2-



29

BOGEModel

Max. pressure Receiver volume

Effective free air delivery*

Motor power

Dimensionssuper-silenced

W x D x H


W x D x H



psig bar gallons cfm m3/min HP kW inches inches lbs. lbs.S 10- 100 7 120 44 1.24 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 941 974

115/125 8/8.6 120 42 1.18 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 941 974

150 10 120 38 1.06 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 941 974

190 13 120 32 0.91 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 941 974

S 15- 100 7 120 62 1.75 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1069 1102

115/125 8/8.6 120 58 1.65 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1069 1102

150 10 120 51 1.45 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1069 1102

190 13 120 44 1.25 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1069 1102

S 20-2- 100 7 240 94 2.67 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1648 1699

115/125 8/8.6 240 91 2.57 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1648 1699

150 10 240 80 2.24 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1648 1699

190 13 240 67 1.90 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1648 1699

S 24-2- 100 7 240 113 3.20 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1703 1754

115/125 8/8.6 240 108 3.05 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1703 1754

150 10 240 94 2.66 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1703 1754

190 13 240 80 2.26 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1703 1754

S 29-2- 100 7 240 129 3.64 30 22.0 80 x 40 x 54 80 x 40 x 67.5 1754 1805

115/125 8/8.6 240 122 3.45 30 22.0 80 x 40 x 54 80 x 40 x 67.5 1754 1805

150 10 240 110 3.11 30 22.0 80 x 40 x 54 80 x 40 x 67.5 1754 1805190 13 240 91 2.57 30 22.0 80 x 40 x 54 80 x 40 x 67.5 1754 1805



Compressed air center SD-Screw compressorwith refrigerant dryermounted on horizontal receiver

Compressor center SD 10- to SD 29-2-



31

BOGEModel

Max. pressure Receiver volume


Motor power

Dimensionssuper-silenced

W x D x H


W x D x H



psig bar gallons cfm m3/min HP kW inches inches lbs. lbs.SD 10- 100 7 120 44 1.24 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 1135 1168

115/125 8/8.6 120 42 1.18 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 1135 1168

150 10 120 38 1.06 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 1135 1168

190 13 120 32 0.91 10 7.5 67 x 28.75 x 48 67 x 28.75 x 57 1135 1168

SD 15- 100 7 120 62 1.75 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1223 1256

115/125 8/8.6 120 58 1.65 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1223 1256

150 10 120 51 1.45 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1223 1256

190 13 120 44 1.25 15 11.0 67 x 28.75 x 48 67 x 28.75 x 57 1223 1256

SD 20-2- 100 7 240 94 2.67 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1914 1965

115/125 8/8.6 240 91 2.57 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1914 1965

150 10 240 80 2.24 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1914 1965

190 13 240 67 1.90 20 15.0 80 x 40 x 54 80 x 40 x 67.5 1914 1965

SD 24-2- 100 7 240 113 3.20 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1993 2044

115/125 8/8.6 240 108 3.05 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1993 2044

150 10 240 94 2.66 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1993 2044

190 13 240 80 2.26 25 18.5 80 x 40 x 54 80 x 40 x 67.5 1993 2044

SD 29-2- 100 7 240 129 3.64 30 22.0 80 x 40 x 54 80 x 40 x 67.5 2044 2095

115/125 8/8.6 240 122 3.45 30 22.0 80 x 40 x 54 80 x 40 x 67.5 2044 2095

150 10 240 110 3.11 30 22.0 80 x 40 x 54 80 x 40 x 67.5 2044 2095190 13 240 91 2.57 30 22.0 80 x 40 x 54 80 x 40 x 67.5 2044 2095



Effective free air delivery: 135 – 1441 cfm, 3.82 – 40.8 m³/minPressure range: 100 – 190 psig, 7 – 13 barMotor range: 30 – 350 HP, 22 – 340 kW

DECOUPLED UNITA sub-frame mounted on vibration

damping feet prevents transmission

of structure borne sound.

A rigid basic frame allows

easy transportation by forklift.

VALVE-LESS OIL CIRCUITThe BOGE screw compressor is

designed with a valve-less oil circuit

eliminating the need for oil stop or

check valves. This function provides

maximum operating safety.





EFFICIENCYThe specially designed BOGE airend

provides high output volumes at low

energy consumption – for reliable

and energy effi cient compressed air

supply.

Screw compressor S 40-2 to S 341


33

BOGEModel

Max.pressure


Motor power Dimensions1)

silencedW x D x H

Dimensions2)

super-silencedW x D x H

Compressed air

Weightsilenced

Weightsuper-

silencedMain drive

motorFan

motorpsig bar cfm m3/min HP kW HP kW inches inches outlet lbs. lbs.

S 40-2 100 7 195 5.53 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1630 1700115/125 8/8.6 183 5.17 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1630 1700

150 10 163 4.63 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1630 1700190 13 135 3.82 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1630 1700


150 10 204 5.78 50 37 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1675 1740190 13 175 4.95 50 37 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1675 1740


150 10 224 6.34 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1850 1920190 13 190 5.36 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1850 1920


150 10 244 6.92 60 45 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2570 2670190 13 207 5.87 60 45 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2570 2670


150 10 293 8.30 75 55 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2680 2790190 13 251 7.11 75 55 3.5 2.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2680 2790


150 10 371 10.50 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2755 2865190 13 325 9.20 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 2755 2865

S 101 100 7 480 13.60 100 75 6.2 4.6 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4080 4210115/125 8/8.6 463 13.10 100 75 6.2 4.6 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4080 4210

150 10 403 11.40 100 75 6.2 4.6 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4080 4210190 13 346 9.80 100 75 6.2 4.6 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4080 4210


150 10 484 13.70 125 90 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4190 4315190 13 424 12.00 125 90 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4190 4315


150 10 576 16.30 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4565 4700190 13 501 14.20 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 4565 4700

S 151 100 7 706 20.00 150 110 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5090 5315115/125 8/8.6 685 19.40 150 110 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5090 5315

150 10 600 17.00 150 110 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5090 5315190 13 508 14.40 150 110 10.0 7.5 101 x 63 x 79 101 x 63 x 99 3˝ ANSI 5090 5315





S 271 100 7 1274 36.09 270 200 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 9920 10140115/125 8/8.6 1225 34.70 270 200 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 9920 10140

150 10 1077 30.50 270 200 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 9920 10140190 13 872 24.70 270 200 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 9920 10140

S 341 100 7 1498 42.43 340 250 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 11020 11240115/125 8/8.6 1441 40.80 340 250 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 11020 11240

150 10 1310 37.10 340 250 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 11020 11240190 13 1119 31.70 340 250 12.5 9.2 122 x 72.2 x 85.5 122 x 72.2 x 104.1 4˝ ANSI 11020 11240

* Free air delivery for the complete package in accordance with ISO 1217, Appendix E, at 20ºC ambient temperature and maximum pressure. Emitted sound pressure values from 68 dB(A) according to DIN EN ISO 2151:2009 1) Super-silenced at the intake end 2) Super-silenced at the intake end and discharge end



INTERNAL PIPEWORKAll oil carrying pipes are made of

steel terminating with high quality

precision threaded joints that are

leak proof and safe even under the

highest pressures. The entire

machine utilizes only one hose on

the clean air side which also serves

for vibration damping.

FREQUENCY CONTROLThe frequency converter ensures a

continuous volume fl ow between

25 and 100 percent automatically

adapting to the momentary

demand of the compressed air

system. Soft starting also avoids

undue wear and tear and prolongs

the service life of the compressor.





ENERGY SAVINGTighter/reduced system pressure

virtually eliminates off load running,

and in turn reduces start-up current

peaks, and contributes to potential

energy savings of up to 40%

Screw compressor SF 15 to SF 150 with frequency control

SF 15 to SF 29-2 SF 40-2 to SF 150


35

Advantage through distinctly reduced energy consumption: The integrated frequency control of the SF series reduces idling times and eliminates pressure fl uctuations. Using less compressed air means using less energy because the volume fl ow is continuously adapted to demand. Soft starting also avoids undue wear and tear and prolongs the service life of the compressor.

For maximized effi ciency and air delivery: This range of screw compressors is ideal for the effi cient operation of larger volumes of air. The integrated frequency converter ensures a continuous volume fl ow between 25 and 100 percent by automatically adapting to the momentary demand of the compressed air system – an advantage with big pay back due to distinctly reduced energy costs.

BOGEModel

Max.pressure



silencedW x D x H

Dimensions2)


Compressed air

Weightsilenced

Weightsuper-

silencedMain drive

motorFan


SF 15 100 7 18- 62 0.52- 1.75 15 11 – – – 37 x 27 x 55 NPT 1/2 – 562

115/125 8/8.6 17- 58 0.49- 1.65 15 11 – – 37 x 27 x 46 – NPT 1/2 – 562

150 10 14- 51 0.39- 1.45 15 11 – – 37 x 27 x 46 – NPT 1/2 – 562

190 13 14- 44 0.39- 1.25 15 11 – – 37 x 27 x 46 – NPT 1/2 – 562

SF 24-2 100 7 31-113 0.89- 3.21 25 18.5 – – 47 x 33 x 55 – NPT 1 – 856

115/125 8/8.6 30-108 0.85- 3.05 25 18.5 – – 47 x 33 x 55 – NPT 1 – 856

150 10 22- 94 0.63- 2.66 25 18.5 – – 47 x 33 x 55 – NPT 1 – 856

190 13 16- 80 0.44- 2.26 25 18.5 – – 47 x 33 x 55 – NPT 1 – 856

SF 29-2 100 7 37-129 1.07- 3.64 30 22 – – 47 x 33 x 55 – NPT 1 – 856

115/125 8/8.6 36-122 1.02- 3.45 30 22 – – 47 x 33 x 55 – NPT 1 – 856

150 10 31-110 0.88- 3.11 30 22 – – 47 x 33 x 55 – NPT 1 – 856

190 13 16- 80 0.71- 2.57 30 22 – – 47 x 33 x 55 – NPT 1 – 856

SF 40-2 100 7 49-195 1.38- 5.53 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1730 1795

115/125 8/8.6 46-183 1.29- 5.17 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1730 1795

150 10 41-163 1.16- 4.63 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1730 1795

190 13 34-135 0.96- 3.82 40 30 1.5 1.1 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1730 1795

SF 60-2 100 7 64-258 1.82- 7.30 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1915 2018

115/125 8/8.6 62-247 1.75- 7.00 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1915 2018

150 10 56-223 1.58- 6.34 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1915 2018

190 13 47-189 1.34- 5.36 60 45 2.4 1.8 64 x 38 x 57 64 x 38 x 77 NPT 11/4 1915 2018

SF 100-2 100 7 114-457 3.20-13.00 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 3305 3415

115/125 8/8.6 107-427 3.00-12.10 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 3305 3415

150 10 93-371 2.60-10.50 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 3305 3415

190 13 81-325 2.30- 9.20 100 75 6.2 4.6 79 x 42 x 57 79 x 42 x 77 NPT 11/2 3305 3415

SF 150 100 7 171-685 4.90-19.40 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 5290 5425

115/125 8/8.6 162-650 4.60-18.40 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 5290 5425

150 10 144-575 4.08-16.30 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 5290 5425190 13 126-501 3.55-14.20 150 110 8.5 6.3 93 x 53 x 69 93 x 53 x 89 NPT 21/2 5290 5425




MAXIMUM EFFICIENCYThe specially designed BOGE airend

provides high output volumes at low

energy consumption – for reliable and

energy effi cient compressed air supply.

Tighter/reduced system pressure

virtually eliminates off load running,

which in turn reduces start-up current

peaks, and contributes to potential

energy savings of up to 40%.

FREQUENCY CONTROLThe frequency converter ensures a

continuous volume fl ow between

25 and 100 percent automatically

adapting to the momentary demand

of the compressed air system. The

soft starting also avoids undue wear

and tear and prolongs the service

life of the compressor.





PROTECTIONA full range of high performance

synthetic lubricants are available

for various applications. Extending

lubricant change intervals and

protecting your equipment.

Screw compressor SLF 30 to SLF 271 with frequency control

SLF 30 (optionally with radial fan)


37

Best specifi c working point: When frequency controlled the SLF series compressors automatically adjust to the air demand while controlling the pressure perfectly. In the event of a change of the pressure value, the output automatically adjusts. A 190 psig machine thus regulated to a 125 psig machine yields a correspondingly higher output – without any expensive remodeling or design related modifi cations.


BOGEModel

Max.pressure



silencedW x D x H

Dimensions2)


Com-pressed

air

Weightsilenced

Weightsuper-

silencedMain drive

motorFan


SLF 30 100 7 37.4- 143 1.06- 4.04 30 22 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1543 1609

115/125 8/8.6 37.4- 137 1.06- 3.87 30 22 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1543 1609

150 10 37.4- 117 1.06- 3.30 30 22 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1543 1609

190 13 37.4- 94.6 1.06- 2.68 30 22 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1543 1609

SLF 40 100 7 37.4- 186 1.06- 5.28 40 30 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1698 1786

115/125 8/8.6 37.4- 178 1.06- 5.05 40 30 1.5 1.1 74 x 38 x 57 74 x 38 x 76.5 NPT 11/4 1698 1786

150 10 37.4- 160 1.06- 4.53 40 30 1.5 1.1 74 x 38 x 57 74 x 38 x 77 NPT 11/4 1698 1786

190 13 37.4- 135 1.06- 3.82 40 30 1.5 1.1 74 x 38 x 57 74 x 38 x 77 NPT 11/4 1698 1786

SLF 51 100 7 53.3- 248 1.51- 7.01 50 37 2.4 1.8 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2249 2359

115/125 8/8.6 53.3- 237 1.51- 6.71 50 37 2.4 1.8 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2249 2359

150 10 51.9- 213 1.47- 6.04 50 37 2.4 1.8 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2249 2359

190 13 48.4- 176 1.37- 4.98 50 37 2.4 1.8 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2249 2359

SLF 61 100 7 54.7- 290 1.55- 8.22 60 45 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2535 2646

115/125 8/8.6 54.7- 278 1.55- 7.87 60 45 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2535 2646

150 10 53.3- 244 1.51- 6.92 60 45 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2535 2646

190 13 50.1- 208 1.42- 5.90 60 45 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2535 2646

SLF 75 100 7 54.7- 344 1.55- 9.75 75 55 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2800 2910

115/125 8/8.6 54.7- 329 1.55- 9.33 75 55 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2800 2910

150 10 53.3- 297 1.51- 8.40 75 55 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2800 2910

190 13 51.6- 256 1.42- 7.26 75 55 3.5 2.6 80 x 43 x 57 80 x 43 x 77 NPT 11/2 2800 2910

SLF 101 100 7 149- 503 4.22-14.25 100 75 6.2 4.6 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4850 4982

115/125 8/8.6 149- 482 4.22-13.64 100 75 6.2 4.6 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4850 4982

150 10 147- 435 4.16-12.33 100 75 6.2 4.6 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4850 4982

190 13 141- 374 4.00-10.58 100 75 6.2 4.6 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4850 4982

SLF 125 100 7 149- 579 4.22-16.41 125 90 8.5 6.34 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4960 5093

115/125 8/8.6 149- 554 4.22-15.70 125 90 8.5 6.34 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4960 5093

150 10 147- 507 4.16-14.36 125 90 8.5 6.34 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4960 5093

190 13 141- 443 4.00-12.56 125 90 8.5 6.34 95 x 52.5 x 69 95 x 52.5 x 89 NPT 21/2 4960 5093

SLF 221 100 7 228-1041 6.46-29.48 220 160 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 9921 10141

115/125 8/8.6 228- 996 6.46-28.21 220 160 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 9921 10141

150 10 218- 885 6.18-25.06 220 160 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 9921 10141

190 13 193- 719 5.46-20.36 220 160 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 9921 10141

SLF 271 100 7 228-1280 6.46-36.26 270 200 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 10362 10582

115/125 8/8.6 228-1225 6.46-34,70 270 200 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 10362 10582

150 10 218-1077 6.18-30.50 270 200 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 10362 10582190 13 193- 872 5.46-24.70 270 200 10 7.46 124 x 75 x 84.5 124 x 75 x 104 4˝ ANSI 10362 10582

SERVICE

READY FOR ACTION WORLDWIDE: BOGE Service Support – Worldwide

FLEXIBLE SERVICE

This BOGE service program has been developed to adapt to each customer’s unique requirements. It is our objective to create a tailor-made BOGE service package covering inspection, service, breakdown, with customized warranty arrangements as well as complete all-in service contracts.

Please contact us to help you determine the type of service best suited to meet your needs: Just email us at [email protected] – our service specialists will be in touch with you shortly!

SERVICE / MAINTENANCEService support solutions including contracts covering repair, and even warranty extension by using BOGE Genuine Parts and qualifi ed BOGE Service Technicians.

EXTENDED WARRANTY Extension of your factory warranty up to 5 years with the use of BOGE Genuine Parts and lubricants for total security and back-up.

MAINTENANCE & REPAIROptions include; long-term fi xed cost maintenance plans, a fl at rate for all types of service and spare parts with a possible warranty extension up to 5 years.

COMMISSIONINGConnection and adjustment of all equipment at your facility: a fast and dependable service delivered by qualifi ed BOGE service technicians. Full installation on request.

24 HOUR HELPLINE Emergency helpline for trouble shooting and technical support: available any time around the clock!

COMPRESSED AIR FLAT RATE

A comprehensive service plan created to satisfy your individual requirements: e.g. taking responsibility for the compressed air station at your facility including complete plant management for a monthly fl at rate irrespective of hours of operation (energy costs not included).


24-hr

Service your added value! Maximized reliability and economic effi ciency are not the only technical advantages that BOGE has to offer. Our com prehensive service support program will ensure your BOGE compressed air system remains in tip top condition. Wherever you need us, whatever we can do for you: BOGE Service Support is always readily available close by – competent, to the highest standards, and always one step ahead.

BOGE EXTENDED WARRANTY BOGE Genuine Parts enable you to extend your

factory warranty up to 5 years: 2 years factory

warranty with 3 years additional Genuine Parts

warranty – the choice is yours. Furthermore,

Genuine Parts ensures manufacturer’s

recommended maintenance schedule of new

and existing equipment at the specifi ed service

intervals.

For more information email [email protected]

BOGE ORIGINAL PARTS Only original BOGE spare parts have the

manufacturer’s technological edge. You can be

confi dent when opting for BOGE original spare

parts in the service of your BOGE compressed

air system will ensure that the integrity of the

compressor is maintained, effi ciency is retained

and your peace of mind is sustained.

ALWAYS NEARBYBOGE has a network of dedicated service

technicians and certifi ed partners at its

disposal to help you worldwide with your

installation, upgrading, commissioning or

approval, maintenance, repair, or inspection:

You can rely on the know-how and experience

of our qualifi ed experts – at all times.

Hotline Mobile Service: 770-874-1570

EMERGENCY ASSISTANCE In the case of an emergency where immediate

technical support is required, the BOGE product

support trouble shooters or the BOGE Helpline

team are available to you 24/7.

BOGE: 770-874-1570

AIR AUDITSBy analyzing your existing compressed air

system, our energy effi ciency experts can

identify where savings can be made. The

BOGE AIReport includes measurement of:

dew point control, vibration control, leakage,

noise, oil check and TAN check.

TRAINING COURSES The BOGE Training Courses were established

in order to train and certify internal employees

and external partners as qualifi ed BOGE Service

Technicians. Attendance of Training Courses held

in the in-house training center further assist in

refreshing existing BOGE Service Technician’s

knowledge at regular intervals.

C E R T I F I E D

SERVICE TECHNICIAN

Screw Compressors

39

302-

USA-

2-10

.201

0/T

· T

echn

ical

cha

nges

and

erro

rs re

serv

ed.

Our ranges of services include the following: • Energy effi cient systems development

• Plant design and engineering

• System control and visualization

• Oil injected screw compressors

• Compressed air treatment

• Compressed air distribution and storage

• Compressed air accessories

• Compressed air service

For four generations, customers from mechanical engineering, industry and trade have relied on BOGE know-how when it comes to planning, developing and manufacturing compressed air systems. They are fully aware of the fact that BOGE AIR is more than just ordinary compressed air: utmost safety, outstanding effi ciency, excellent quality, maximized fl exibility along with dependable service are the ingredients to transform BOGE AIR into air to work with – in Germany, in Europe and in more than 80 countries around the world.


ISO 1217 ANNEX CCAGI/PNEUROP PN2CPTC2

50-200 HP

CAGI Rotary Screw Compressor Performance

Verifi cation Program

PerformanceTested and Rated

in Accordancewith

Program administered byIntertak testing Services

BOGE COMPRESSORS BOGE AMERICA, INC. 3414 Florence Circle

Suite 100 · Powder Springs, GA 30127

Tel. 770-874-1570 · Fax. 770-874-1571

www.boge.com · [email protected]

Documents

SCREW COMPRESSORSBOGE screw compressor is very much based on the principles of nature. High outputs, effective oil separation, and an extremely long service life of the component parts