Scott D CarnieINDEPENDENT COATINGS SPECIALIST

+44 (0) 7786 864861rovscottcarnie@yahoo.co.uk

Ten years oil and gas industry experience specializing in many types of pipe coating application and Inspection. Working within the corrosion control industry has given me vast familiarity with many varied types of surface preparation treatments and applications of sophisticated coatings and linings. My past experience has provided me with valuable knowledge enabling me to identify and concentrate on specific areas that may lead to coating failure and promptly rectify or advise on corrective actions in the best interests of my clients.

• BOSIET, HUET & EBS, MIST Certificate.11thApril 2020 • Norwegian Escape Shute(OLF)090614220.8thJune 2018 • CIP NACE level 2 #49148 -30th Nov 2016 • British Seaman’s Card. Expires – 4th May 2022 • Offshore medical. - Expires 11th June 2016 • Canusa GTS Shrink Sleeve certificate for application • ROV Pilot/Tech 2 Certified.

• IRMII Certified IRMII/05/14/003 • Globally Vaccinated. • Jaeger J1 eye tested • HND Visual Communication. • HNC Fine Art. • GSVQ Art&Design3

Previous Employment Chevron – Senior Inspector – Jan 2015 – October 2015 Covering X5 PQT’s Norway for ongoing Upstream Wheatstone Project. HBE (High Build Epoxy Spray application) IGPE (Immersible Grade Phenolic Epoxy) IMPP, FBE, FSPP. PPT handover Henderson, Australia Technip – Coating Inspector – October- November 2014 Alder Bulkheads. Inspection and testing of TSA application on 10/16” PIP bulkheads. Total - Coating Inspector – Client – July – September 2014 Martin-Linge Project - S-Lay on the Seven Borealis of 24” Poly Ethylene and CWC mainline coated pipe. GTS-PE-HSS and HDPU Foam Field Joints. BP - Coating Inspector – Client – Jan – May2014 Clair Ridge. Inspection, witness, observation review and report of 3LPP application on 1089 6” line pipes at Bredero Shaw, Orkanger. Ensuring production testing and end product has been applied to the coating specifications set out in the ITP and coating procedures. (Followed up with Field Joint PQT, PPT and production at SS7 Spool Base, Leith, Scotland.) • Liaised with BP Project Engineers, SS7 Inspection and Bredero Shaw Norway Project coordinators. • Review and documented in house laboratory testing including – Conductivity and Sieve Analysis, DSC, Chromate concentration,

Indentation and Holidays. 24 hour HWS and 48 Hour CD testing. Peel adhesions and pipe labeling. • Straightening trials. • Daily and Weekly reports. Documentation review (Pipe tallies, Calibration certification and PDS, MSDS.) • Followed up Exova testing in Manchester – CD testing, Peel testing and Impact with Holiday testing on Berry Plastic Heat Shrink

Sleeves.

Chevron - Coating Inspector – Client –March 10 days Call off Inspection for Chevron, Witnessing the continued IMPP PPT at Allseas, Netherlands as continuation of the Wheatstone Project and reporting direct to Chevron engineers. Witnessed roller box testing and high impact testing. Total - Coating Inspector – Client – Sept – Oct 2013 Laggan – Tormore – Global Transitioning Sleeve – Polypropylene – Wrapid Sleeve (GTS-PP-WS) PQT. Witnessing the correct application of HSS to 3LPP Field Joints. Testing equipment was calibrated and certified for use. Dealt with Vendor ITP queries and correct codes of practices. Working to ISO and NF Standards. • Atmospheric checks, Blast Profile Testing (Surface replica tape) & Dust Testing. • Salt, WFT & DFT Testing. • Performed Kern Peel Testing. • Holiday Detection. • Thermocouple Heat Profiling for Induction Coil heating. Chevron - Subsea Coating Inspector – Client - Aug – Dec 2013 AGC Wheatstone PQT for the application process of Contra-Therm and Glass Reinforced Plastic to 14” test PUP’s for further destructive testing. Gloucester UK • Liaising with other Inspection parties and contractor for PPM and troubleshooting. • Exova Testing – Dolly Pull Off Testing, Flexibility Testing @ -30ºC, 48hour/7days & 28 day CD & HWS testing, Density, Water

Absorption, Differential Scanning Calorimeter and Hydrostatic Compression testing • Material batch review, test equipment calibration. • Monitoring and testing of each level of tile application ensuring personnel cohere to HSE standards. Technip - Coating Inspector – June 2013 Monitoring, testing and reporting to my client the application of Solid PU field joints to LD SPU via injection molding on Subsea Spools - Aberdeen. • Ensuring all personnel is working safely and to the application procedure provided.

• Batch No for materials recorded and chemicals stored and labeled appropriately. • Equipment calibration and certification • Shore hardness & Peel testing • Documents review Chevron - Subsea Coating Inspector – Client – Jan – Mar 2013 Troubleshooting, problem solving, consulting and monitoring the application of FBE with Flame Sprayed Polypropylene to PUP’s and Bends for part of the Wheatstone Project in France. Duties include. • Ensuring all personnel is working safely and to specification set out in the ITP and Coating Procedures. • Lab Testing – Gradation, FBE DSC testing, 48 hour and 28 day HWS tests. Steady State Heat Flux Measurement testing.

Conductivity and Chloride testing. • Electronic Stylus Profile Gauges. • Cold lathe Cutting Hertel – Contracted Pipe Coating Supervisor - Sept – Oct 2012 & Mar – June 2013 – Baku, Azerbaijan • PCP and shrink sleeve field joint application for Subsea risers. • Aided Hertel with ITP amendments. • Completed job safely and ahead of schedule • Liaised with clients to provide updates • Managed a team of three local employees, overcoming difficult language barriers • Managed all HSE documentation, ensuring appropriate HSE policies and procedures were followed at all times Bredero Shaw FJS – Ellon Base, Scotland Thermal Pipe Coating & Anti Corrosion Technician, Charge Hand 2006 – 2012 • Mobilization and demobilization of equipment for site • Shot, grit blasting and vacuum-blasting operator • Induction coil heating with maintenance of TESI, and GenSet generators and custom built induction cables • Fusion bonding epoxy (FBE) & polypropylene application with full maintenance knowledge of fluid beds • Polypropylene flame spray • Glass reinforced plastic application (GRP) • Polyurethane injection molding (PU, GSPU, LDSPU, Solid P.U) maintenance of geared pumps, Pneumatics and Hydraulically

powered systems. Construction of fluid pumps, assembly of umbilical lines mixing chambers and 3 phase electric motors. • PLC operations and faultfinding. • Generators, mobile air compressors and dryers • Application of polyurethane and polypropylene shrink sleeves. CANUSA Certified applicator. • Application of various thermal and anti-corrosive coatings to Subsea PLETS, FLETS, Manifolds, Xmas Trees and Flanges • Injection Moulton Polypropylene (IMPP) operator with maintenance knowledge and understanding. • Experienced knowledge of coating inspection in factory laboratories and field conditions. • Polychloroprene (PCP) & Ethylene Propylene Diene Monomer (EPDM) Technician (Rubber)

Offsite/Rotational work for Bredero Shaw FJC Angola/Soyo & Ambriz - Supervisor 2 Years 9 - 17 week rotations. Equipment mobilization. Full production PPT for IMPP Quad rack coating system with auto blast, Induction heating chamfer preparation for auto FBE systems. All machines maintained daily and monthly in accordance to maintenance checks. 10/09/09 - 15/08/11 Norway/Orkanger – Organized assembled and operated all automated blast and FBE/Adhesive application. TESI Induction coil Pico-Log qualification for IMPP PQT, PPT for Block 31 and Kizomba Satellites Angola via Bredero Shaw FJS sister company in Norway. (05/05/09 - 08/07/09) Finland/Pori - 3 weeks - GSPU coating on the Jubilee PLETS & FLETS for Technip. Proper use of chemical release agent’s adhering to COSHH and Health & Safety regulations at all times. Mold application, Polyurethane and Isocyanides material mixing. Storage and transfer pump operations. Maintenance and troubleshooting of Injection molding equipment. Plural component pumps Umbilical lines, mixing chambers and chemical purging (15/11/08 – 05/12/08)

Scotland & England – Invergordon Aberdeen & Hartlepool Equipment Mobilization and demobilization, TESI Induction generators, Propane and Oxygen fuelled Ionizers, Shot blasting equipment, air compressors and air drying units for the application of Solid PU, GSPU, LDSPU, FBE, PP, GRP Epoxies, Glass Flake, and Shrink Sleeve coatings. (Various site contracts between 2006-2012) Netherlands/Rotterdam – Solid PU bend joints coated. 2-man job. Mobilization of hand blasting pot and shot, chemical primer, COSHH mold prep and Inspection work. (16/07/08 - 23/07/08) Newfoundland/Arnolds Cove – LD SPU custom field joint application of the Husky MSF 1 and MSF 2 manifold. (02/03/08 - 12/05/08) Scotland/Leith Spool base - Started my career in the Oil and Gas Industry at the prepping station of a production line for 3” 6” 12” Solid PU Field Joint application. The safe use of Propane torches 110v grinders, induction coils. (24/05/06 – 30/07/07) References Alex Garner Subsea Engineering Associates AGarner@Chevron.com 0061 (0) 863 155 722 Gerry Dunn Corrosion Engineer Gerry.dunn1@btinternet.com 0044 (0) 787 943 7830 Dave Girvin QA/QC Lead Wheatstone Project dvgt@chevron.com 0061 (0) 407 994 373 Mark Davidson Coating/Insulation Engineer mark.davidson@se1.bp.com 0082 (0) 52 230 5465 Robert Macfarlane Senior Welding Insp (BP) Robert.macfalane1@btopenworld.com 0044 (0) 787 649 1903