Upload
others
View
14
Download
0
Embed Size (px)
Citation preview
www.fc iconnect .com 1-800-346-4175 www.fc iconnect .com 1-800-346-4175BURNDY® Products BURNDY® Products
SPECIFICATIONS
MCC500 MCC1000� Weight: 3.5 lbs. 9.0 lbs.� Length: 21” 32”� Cutting Capacity: 500 kcmil 1000 kcmil
Copper & Aluminum Cable Only
Type MCC500 and MCC1000
Manual Cable Cutters� High-quality design and construction for easy cutting with minimal
cable distortion and long life� Fiberglass handles with soft grips provide comfortable tool operation� Rugged high-quality steel blades� 1-year limited warranty (excluding blades)
Type MRC840 HYTOOL™
Type MD6 and MD6-8 Series HYTOOL™
SPECIFICATIONS
� Weight: 8 1/4 lbs.� Width: 1 3/4”� Height: 8”� Conductor range: #8-4/O AWG Cu HYDENT™
Type MD7 and MD7-8 Series HYTOOL™
SPECIFICATIONS
� Weight: 6 lbs.� Length: 25 3/8”� Crimp Force: 9,000 lbs.� Conductor range: Installs full range of
connectors (taps, splices, terminals):#14 through 4/0.Applications: Full Tension and Non-Tension.
Mechanical Rotating Die Crimp Tool� Heat treated steel jaws reduce jaw buckling and misalignment under
heavy loading� Plated jaws provide enhanced corrosion protection� Comfort grip handles prevent hand slippage and fatigue during
continuous use� Engraved crimp grooves for die Index embossment for inspectability
of installed connectors� Installs #8 – 4/0 AWG BURNDY® HYDENT™ copper connectors
and splices� 1-year limited warranty
Hand Operated Tools � Proper crimps are assured with butting steel jaws� Easy visual field check for proper tool adjustment with orange
alignment guides� Easy field adjustment with allen screws� The “D3” groove accommodates the complete line of “W” and
“X” die inserts� Fast and easy one-handed die insertion� Life cycle tested for over 90,000 crimp cycles� 5-year limited warranty
Hand Operated Tools� Integral visual wear indicator allows user to quickly verify tool
condition for proper crimping operation� Life cycle tested to over 99,000 crimp cycles� The “D3” groove accommodates the complete line of “W” and
“X” die inserts� Ergonomically designed, one piece composite polymer handles� Positive-lock, spring loaded die retainer buttons� 5-year limited warranty
SPECIFICATIONS
� Weight: 7 lbs.� Length: 25”� Width: 8” (at handle end)� Crimp Force: 9,000 lbs.� Conductor range: Installs full range of
connectors (taps, splices, terminals):#14 through 4/0.Applications: Full Tension and Non-Tension.
Type RCC556 and RCC1000
Type Y500CT-HS L’IL CRIMP™
Type Y35 and Y35-2 HYPRESS™
SPECIFICATIONS
RCC556 RCC1000� Weight: 4 lbs. 4.5 lbs.� Length: 21” 32”� Cutting Capacity: 500 kcmil 1000 kcmil
Cu & Al556 ACSR Cu&Alonly
SPECIFICATIONS
� Weight: 7.8 lbs.� Width: 17.6”� Height: 6”� Output Force: 6 (US) Tons� Total Strokes: 7 (w/o connector)
Installs splices, taps and terminations:#8-500 kcmil Cu#8-350 kcmil flexible cable#8-350 kcmil Al
Types Y750HS and Y750-2HS HYPRESS™
SPECIFICATIONS
� Weight (less case): 13 lbs.� Force developed: 12 tons� Operating pressure: 10,000 psi� Overall length: 23 1/4”� Head width: 4 3/4”� Conductor range: 8-750 kcmil Al/Cu
ACSR-See FCI/BURNDY® Products Master Catalog
Ratchet Type Cable Cutters� Bi-directional ratchet mechanism provides positive control of blade
movement � Thumb-controlled rapid blade movement provides quick closing
or opening of blades when not cutting� Fiberglass handles with soft grips provide comfortable tool operation� Stiffener bar on the RCC556 for operator safety when cutting ACSR� 1-year limited warranty (excluding blades)
6-Ton Hand Operated Hydraulic Tool� Light weight latch head design provides enhanced clearance
for tap connectors� 180º head rotation allowing user to crimp in tight spaces� Audible pressure “pop-off” valve indicates completed crimp� Permanent “D3” crimp groove accepts all BURNDY® “W” and “X” dies� High speed ram advance provides faster crimps with less hand strokes� Handle trigger drain for ram retraction� 2-year limited warranty
12-Ton Hand Operated Hydraulic Tool� Compact “C” shaped head allows easy placement and removal
from continuous conductor lengths� 180 º head rotation� Rapid ram advance reduces installation time by eliminating
need to pump handles� Trigger controlled ram return� 2-year limited warranty
� Covers a wide range of applications with a lightweight, self-contained system and C-shaped head with a wide 1.65” opening
� Easy tool positioning with its 355° head rotation� Patented rapid advance pump for faster crimps� Handle trigger drain for convenient ram retraction� Quality assurance is provided with an audible “Pop-Off” pressure relief valve� Exposed die lock buttons for easy die change and retention� Comfort grip handles help ease operator fatigue with continuous use� Rubber covered head and handles on Y750-2HS for tool impact protection� Supplied with high impact plastic carrying case� 2-year limited warranty
SPECIFICATIONS
� Weight (less case): 14.5 lbs� Force developed: 12 Tons� Operating Pressure: 10,000 psi� Overall Length: 23.5”� Width: 8.0”� Jaw opening: 1.65”� Conductor range: #8-750 kcmil Al/Cu
#4-556.5 kcmil ACSR
Nov.2003 Tools Brochure 11/20/03 3:10 PM Page 4
www.fc iconnect .com 1-800-346-4175 www.fc iconnect .com 1-800-346-4175BURNDY® Products BURNDY® Products
Type Y39 HYPRESS™
Type Y644HS Dieless HYPRESS™
SPECIFICATIONS
� Weight (less case): 6 1/2 lbs.� Force developed: 2 tons� Operating Pressure: 10,000 psi� Head Width: 3 1/8”� Height: 9 1/8”� Conductor range: #8-750 kcmil Al/Cu
SPECIFICATIONS
� Weight (less case): 9 1/2 lbs.� Force developed: 11 tons� Operating Pressure: 10,000 psi� Head Width: 3.93”� Height: 12”� Conductor range: #6-1000 kcmil Al/Cu
12-Ton Remote Power Operated Compression Tool� Easy to work in tight spaces with 3 1/8” wide head� Positive die lock buttons for easy die insertion and removal� Easy to remove or lock into position die holder with recessed
spring latch plus leather strap to prevent loss� Works with all BURNDY® 10,00 psi pumps� 5-year limited warranty
11-Ton Remote Power Operated Hydraulic Tool� Dieless system eliminates the need to purchase dies� Easy tool positioning with its infinitely rotatable head� Easy inspection and positive identification is provided with
the BURNDY® logo � H-CRIMPIT™ dies to crimp YFO and YFD type taps� 5-year limited warranty
SPECIFICATIONS
� Weight (less case): 8 lbs.� Force developed: 12 tons� Operating pressure: 10,000 psi� Head width: 4 3/4”� Head height: 9 1/4”� Conductor range: #8-750 kcmil Al/Cu
ACSR-See FCI/BURNDY® ProductsMaster Catalog
SPECIFICATIONS
� Weight (less case): 10.3 lbs.� Force developed: 12 tons� Operating pressure: 10,000 psi� Head width: 4.43”� Jaw opening: 1.65”� Conductor range: #8-750 kcmil Al/Cu
#4-556 kcmil ACSR
Type Y35BH HYPRESS™
12-Ton Remote Power Operated Tool� C-shaped head for easy tool removal on continuous conductors� Easily lifted into working position using the lifting eye� Mates with universal type hot-stick tooling� Quick disconnect hydraulic fitting� 5-year limited warranty
Type Y750BH HYPRESS™
12-Ton Remote Power Operated Hydraulic Tool� Uses all BURNDY® U-Dies� Covers a wide range of applications � Provides easy tool removal from continuous conductors with its C-
shaped head� Large 1.65” jaw opening� Y750BH-2 provides molded rubber covering on head body and fitting� Infinitely rotatable head� 5-year limited warranty
Type Y644MBH Dieless HYPRESS™
11-Ton Hand Operated Hydraulic Tool� Dieless system, eliminates the need to purchase and maintain dies� Range taking capabilities require only five connectors to cover the
entire range� Patented rapid advance pump for faster crimps� Handle trigger drain for convenient ram retraction� 355° head rotation for versatile tool head positioning in tight areas� Quality assurance is provided with an audible “Pop-Off” pressure relief valve� Comfort grip handles help ease operator fatigue with continuous use� Easy inspection and positive identification is provided with the
BURNDY® logo� Two-year limited warranty
SPECIFICATIONS
� Weight (less case): 15 lbs.� Force developed: 11 tons� Operating pressure: 8,800 psi� Length: 22.5”� Height: 2.75”� Width: 8.0”� Conductor range: #6-1000 kcmil Cu
#6-750 kcmil AL
12-Ton Hand Operated Hydraulic Tool� 3 1/8” wide head allows the tool to work in tight spaces� 180° head rotation� Easy die change out and retention� Rapid ram advance� Trigger release for ram retraction� 2-year limited warranty
Type Y39BH HYPRESS™
SPECIFICATIONS
� Weight (less case): 12 lbs.� Force developed: 12 tons� Operating pressure: 10,000 psi� Overall length: 23”� Head width: 3 1/8”� Conductor range: #6-750 kcmil Al/Cu
Type Y46 and Y46C HYPRESS™
15-Ton Remote Operated Hydraulic Tool� Integral “T” slot prevents jamming on asymmetrical connectors� Uses ”P” dies and standard “U” dies with the PUADP-1 adapter� 15 Ton output force with any 10,000 psi hydraulic pump� The Y46C has a permanently molded rubber head and rubber boot to
cover the hydraulic coupler� Excellent for HYGROUND™ installations� 5-year limited warranty
SPECIFICATIONSY46 Y46C
� Weight (less case): 16 lbs. 17 1/2 lbs.� Force developed: 15 tons 15 Tons� Operating Pressure: 10,000 psi 10,000 psi� Length: 15” 21 3/4”
(Incl. Boot)� Width: 4 1/2” 4 3/4”� Jaw Opening: 2” 2”� Molded Covering: No Yes� Conductor range: #8-1500 kcmil Cu
#8-1250 kcmil AlACSR-See FCI/BURNDY® Products Master Catalog
Type Y45 HYPRESS™
SPECIFICATIONS
� Weight (less case): 15 3/4 lbs.� Force developed: 15 tons� Operating Pressure: 10,000 psi� Head width: 7 1/4”� Head Height: 14 1/4”� Conductor range: #8-1500 kcmil Cu
#8-1000 kcmil Al#6-795 kcmil ACSR
15-Ton Remote Power Operated Hydraulic Tool� Large jaw opening� C-shaped head for ease of removal on continuous conductors� Easy die changing and positive die lock buttons� PT6515 adapter allows the use of standard U-dies� Rugged design provides long life expectancy� Easily lifted into working position using lifting eye� 5-year limited warranty
Nov.2003 Tools Brochure 11/20/03 3:15 PM Page 6
www.fc iconnect .com 1-800-346-4175 www.fc iconnect .com 1-800-346-4175BURNDY® Products BURNDY® Products
60-Ton Remote Operated Hydraulic Tool� Nest hinge allows fully open positioning� Fast, easy die changing and secure die positioning with positive die
release locking pins � Sturdy steel base and steel frame� Heavy-duty handle� Easy to remove splices with nest that pivots open� 5-year limited warranty
Type Y60BHU HYPRESS™
Type HCC Series Hydraulic Cable Cutters
SPECIFICATIONS
� Weight (less case): 70 lbs.� Force developed: 60 tons� Operating pressure: 10,000 PSI� Height: 16.62”� Conductor range: 1/0 str.-2500 kcmil Al/Cu
1/0-2156 kcmil ACSR
6,000 and 10,000 PSI Hydraulic Cable Cutters� Hook head simplifies conductor positioning and cutting� Light-weight design permits continuous use� Cutting blade supports provide proper alignment and clean cable cuts� Easy blade replacement saves time and money� Units operate on matching hydraulic pressures of 6,000 or 10,000 psi
(HCC6 & HCC10)� HCC-CUAL for Cu & Al cable up to 1590 kcmil, HCC-ACSR for Cu, Al
and ACSR up to 954 kcmil 54/7� 5-year limited warranty (excluding blades)
SPECIFICATIONS
HCC6 HCC10� Weight: 7 lbs. 7 lbs.
(Covered 8 lbs.)� Operating Pressure: 6,000 PSI 10,000 PSI� Length: 14” 14”
(Covered 24”)� Width: 5” 5”� Jaw Opening: 1.5” 1.2”
Type BCT500-HS
6-Ton Battery Powered Crimp Tool� One-hand operation allows user to have other hand free
to manipulate connector and conductor� 180º head rotation for better tool and head positioning� Audible pressure “pop-off” valve indicates completed crimp� Light-weight and has an ergonomic handle for easy operation and
helps lessen fatigue� Uses industry standard batteries and charger� 8-second crimp time� Latch head provides enhanced clearance � Permanent “D3” groove accepts all “W” and “X” dies� 1-year limited warranty
SPECIFICATIONS
� Weight: 8.36 lbs.� Height: 11”� Length: 13.4”� Width: 3.12”� Output Force: 6 (US) Tons� Operating Voltage: 12 V-DC� Crimp Time: Approx. 8 seconds� Recharge Time: 60 mins.� Installs splices, taps and terminations:
#8-500 kcmil Cu#8-350 kcmil flexible cable#8-350 kcmil Al
SPECIFICATIONS
� Weight: 6 lbs.� Height: 14.5”� Width: 4.5”� Battery Voltage: 12 Volts DC� Battery Capacity: 1.2A/hr� Charge Time: 1 hour� Cutting Capacity: 750 kcmil hard drawn Cu
1000 kcmil soft drawn Cu1000 kcmil Al
Type BCC1000CUAL
Battery Actuated Cable Cutter� Hook head design simplifies conductor cutting and allows
working in tight spaces� Three-way switch allows user to back off of cables,
make partial cuts, and make adjustments during cutting� Ergonomic design for comfortable tool operation� Wrist loop for added security when cutting conductors overhead� 90-day limited warranty (excluding blades)
Type 18 Volt PATRIOT™ PAT750-18V
Battery Actuated Self Contained 12 Ton Hydraulic Tool� True one handed operation for advance, retract and hold� 12 tons of output force� Ni/MH battery eliminates voltage depression (memory issues)� Audible “pop-off” and green light indicator indicates completion
of crimp� State-of-the-art crimping head design, 360° head rotation� PAT750C-18V with rubber covered head is available� 2-year limited warranty on tool� 1-year limited warranty on battery and charger
SPECIFICATIONS
� Weight: 17 lbs.� Height: 15”� Length: 15.5”� Width: 3.5”� Output Force: 11 (US) Tons� Operating Voltage: 18 V-DC� Recharge Time: 45 mins.� Conductor range: #6-1000 kcmil Cu
#6-750 kcmil Al
Type 18 Volt PATRIOT™ PAT644-18V
Battery Actuated Self-Contained 12-Ton Hydraulic Tool� Dieless system� True one-handed operation for advance, retract and hold� 11 tons of output force� Ni/MH battery eliminates voltage depression (memory issues)� Audible “pop-off” and green light indicator indicates completion of
crimp� State-of-the-art crimping head design, 360° head rotation� PAT644C-18V with rubber covered head is available� 2-year limited warranty on tool� 1-year limited warranty on battery and charger
SPECIFICATIONS
� Weight: 16.5 lbs.� Height: 13.875”� Length: 15.5”� Width: 3.5”� Output Force: 12 (US) Tons� Operating Voltage: 18 V-DC� Recharge Time: 45 mins.� Conductor range: #8-750 kcmil Al/Cu
#4-556 kcmil ACSR
Type BATCUT™-14VBattery Actuated Self Contained Hydraulic Cable Cutter� Patented, infinite 360º head rotation allows user to get into tight spaces� Ergonomic tool design and grip areas for better balance, easy operation,
and less fatigue with continuous use� Battery status L.E.D. indicator allows user to determine the status of the
battery� 14.4 volt Ni/MH (Nickel Metal Hydride) batteries for higher voltage
(more cuts per charge) and no voltage depression or “memory” issuesassociated with other types of batteries
� 1-year limited warranty (excluding blades)
SPECIFICATIONS� Weight: 13.36 lbs.� Height: 13 7/8”� Length: 18 5/8”� Width: 3 1/2”� Output Pressure: 10,000 PSI� Operating Voltage: 14.4 V-DC� Recharge Time: 20 mins.� Cutting Capacity: 1000 kcmil Bare Cu (1.2”)
1000 kcmil Bare Al (1.2”)954 54/7 kcmil ACSR4/0 AWG Copperweld0.38” Guy strand
SPECIFICATIONSHP FP
� Weight: 18 lbs. 19 lbs.� Reservoir Volume: 1 1/8 qts. 1 1/8 qts.� Length: 24 3/4” 23 3/4”� Width: 5” 5”� Closed Height: 6 3/4” 6 1/2”� Height (handle open):20” 17”
Type HP and FP Series Manual Hydraulic Pumps6,000 PSI, 8,800 PSI and 10,000 PSI Hand and Foot Pumps� Maximum mechanical advantage provided with long handle
to reduce fatigue� Built-in factory-set pressure release valve and audible pop to signal
completion of crimp� Equipped with easy-to-operate manual release lever� Tested to operate over 100,000 cycles� 1-year limited warranty
� Output Pressure: HP6 HP8 HP10
6,000 psi 8,800 psi 10,000 psiFP6 FP8 FP106,000 psi 8,800 psi 10,000 psi
Nov.2003 Tools Brochure 11/20/03 3:15 PM Page 8
www.fc iconnect .com 1-800-346-4175 www.fc iconnect .com 1-800-346-4175BURNDY® Products BURNDY® Products
60-Ton Remote Operated Hydraulic Tool� Nest hinge allows fully open positioning� Fast, easy die changing and secure die positioning with positive die
release locking pins � Sturdy steel base and steel frame� Heavy-duty handle� Easy to remove splices with nest that pivots open� 5-year limited warranty
Type Y60BHU HYPRESS™
Type HCC Series Hydraulic Cable Cutters
SPECIFICATIONS
� Weight (less case): 70 lbs.� Force developed: 60 tons� Operating pressure: 10,000 PSI� Height: 16.62”� Conductor range: 1/0 str.-2500 kcmil Al/Cu
1/0-2156 kcmil ACSR
6,000 and 10,000 PSI Hydraulic Cable Cutters� Hook head simplifies conductor positioning and cutting� Light-weight design permits continuous use� Cutting blade supports provide proper alignment and clean cable cuts� Easy blade replacement saves time and money� Units operate on matching hydraulic pressures of 6,000 or 10,000 psi
(HCC6 & HCC10)� HCC-CUAL for Cu & Al cable up to 1590 kcmil, HCC-ACSR for Cu, Al
and ACSR up to 954 kcmil 54/7� 5-year limited warranty (excluding blades)
SPECIFICATIONS
HCC6 HCC10� Weight: 7 lbs. 7 lbs.
(Covered 8 lbs.)� Operating Pressure: 6,000 PSI 10,000 PSI� Length: 14” 14”
(Covered 24”)� Width: 5” 5”� Jaw Opening: 1.5” 1.2”
Type BCT500-HS
6-Ton Battery Powered Crimp Tool� One-hand operation allows user to have other hand free
to manipulate connector and conductor� 180º head rotation for better tool and head positioning� Audible pressure “pop-off” valve indicates completed crimp� Light-weight and has an ergonomic handle for easy operation and
helps lessen fatigue� Uses industry standard batteries and charger� 8-second crimp time� Latch head provides enhanced clearance � Permanent “D3” groove accepts all “W” and “X” dies� 1-year limited warranty
SPECIFICATIONS
� Weight: 8.36 lbs.� Height: 11”� Length: 13.4”� Width: 3.12”� Output Force: 6 (US) Tons� Operating Voltage: 12 V-DC� Crimp Time: Approx. 8 seconds� Recharge Time: 60 mins.� Installs splices, taps and terminations:
#8-500 kcmil Cu#8-350 kcmil flexible cable#8-350 kcmil Al
SPECIFICATIONS
� Weight: 6 lbs.� Height: 14.5”� Width: 4.5”� Battery Voltage: 12 Volts DC� Battery Capacity: 1.2A/hr� Charge Time: 1 hour� Cutting Capacity: 750 kcmil hard drawn Cu
1000 kcmil soft drawn Cu1000 kcmil Al
Type BCC1000CUAL
Battery Actuated Cable Cutter� Hook head design simplifies conductor cutting and allows
working in tight spaces� Three-way switch allows user to back off of cables,
make partial cuts, and make adjustments during cutting� Ergonomic design for comfortable tool operation� Wrist loop for added security when cutting conductors overhead� 90-day limited warranty (excluding blades)
Type 18 Volt PATRIOT™ PAT750-18V
Battery Actuated Self Contained 12 Ton Hydraulic Tool� True one handed operation for advance, retract and hold� 12 tons of output force� Ni/MH battery eliminates voltage depression (memory issues)� Audible “pop-off” and green light indicator indicates completion
of crimp� State-of-the-art crimping head design, 360° head rotation� PAT750C-18V with rubber covered head is available� 2-year limited warranty on tool� 1-year limited warranty on battery and charger
SPECIFICATIONS
� Weight: 17 lbs.� Height: 15”� Length: 15.5”� Width: 3.5”� Output Force: 11 (US) Tons� Operating Voltage: 18 V-DC� Recharge Time: 45 mins.� Conductor range: #6-1000 kcmil Cu
#6-750 kcmil Al
Type 18 Volt PATRIOT™ PAT644-18V
Battery Actuated Self-Contained 12-Ton Hydraulic Tool� Dieless system� True one-handed operation for advance, retract and hold� 11 tons of output force� Ni/MH battery eliminates voltage depression (memory issues)� Audible “pop-off” and green light indicator indicates completion of
crimp� State-of-the-art crimping head design, 360° head rotation� PAT644C-18V with rubber covered head is available� 2-year limited warranty on tool� 1-year limited warranty on battery and charger
SPECIFICATIONS
� Weight: 16.5 lbs.� Height: 13.875”� Length: 15.5”� Width: 3.5”� Output Force: 12 (US) Tons� Operating Voltage: 18 V-DC� Recharge Time: 45 mins.� Conductor range: #8-750 kcmil Al/Cu
#4-556 kcmil ACSR
Type BATCUT™-14VBattery Actuated Self Contained Hydraulic Cable Cutter� Patented, infinite 360º head rotation allows user to get into tight spaces� Ergonomic tool design and grip areas for better balance, easy operation,
and less fatigue with continuous use� Battery status L.E.D. indicator allows user to determine the status of the
battery� 14.4 volt Ni/MH (Nickel Metal Hydride) batteries for higher voltage
(more cuts per charge) and no voltage depression or “memory” issuesassociated with other types of batteries
� 1-year limited warranty (excluding blades)
SPECIFICATIONS� Weight: 13.36 lbs.� Height: 13 7/8”� Length: 18 5/8”� Width: 3 1/2”� Output Pressure: 10,000 PSI� Operating Voltage: 14.4 V-DC� Recharge Time: 20 mins.� Cutting Capacity: 1000 kcmil Bare Cu (1.2”)
1000 kcmil Bare Al (1.2”)954 54/7 kcmil ACSR4/0 AWG Copperweld0.38” Guy strand
SPECIFICATIONSHP FP
� Weight: 18 lbs. 19 lbs.� Reservoir Volume: 1 1/8 qts. 1 1/8 qts.� Length: 24 3/4” 23 3/4”� Width: 5” 5”� Closed Height: 6 3/4” 6 1/2”� Height (handle open):20” 17”
Type HP and FP Series Manual Hydraulic Pumps6,000 PSI, 8,800 PSI and 10,000 PSI Hand and Foot Pumps� Maximum mechanical advantage provided with long handle
to reduce fatigue� Built-in factory-set pressure release valve and audible pop to signal
completion of crimp� Equipped with easy-to-operate manual release lever� Tested to operate over 100,000 cycles� 1-year limited warranty
� Output Pressure: HP6 HP8 HP10
6,000 psi 8,800 psi 10,000 psiFP6 FP8 FP106,000 psi 8,800 psi 10,000 psi
Nov.2003 Tools Brochure 11/20/03 3:15 PM Page 8
www.fc iconnect .com 1-800-346-4175 www.fc iconnect .com 1-800-346-4175BURNDY® Products BURNDY® Products
SPECIFICATIONS
� Weight: 30 lbs.� Motor: 115 V-AC/60 Hz
1/2 HP @ 3450 RPM� Max. Current Draw: 12.5 amperes� Reservoir Volume: 2 qts.� Height: 16”� Base: 6”x 8”
Type EPP10 and EPP6 Electric Hydraulic Pumps
Hydraulic Output Pressure of 10,000 and 6,000 PSI� Easy operation controlled with pendent or manual switch� Audible “pop-off” valve indicates proper pressure has been achieved� Life cycle tested to 100,000 cycles without failure� Lightweight and portable� Optional steel carry case available� 1-year limited warranty
Type EPAC10, EPAC8, & EPAC6 ELECTRIC HYDRAULIC PUMPS
Type GP Gasoline Driven Hydraulic Pumps
Type Y700DC-1B & Y420DC-1B
SPECIFICATIONS
� Motor: HP 115/230 V-AC, 60 HZHP 220/230 V-AC, 50 HZ
� Max. Current Draw: 10 amperes� Reservoir Volume: 8 qts.� Height: 17 1/2”� Dry Weight: 68 lbs.
SPECIFICATIONS
� Dry Weight: 77 3/4 lbs.� Engine: 4 H.P. 4 cycle� Reservoir Volume: 2 gallons (8 qts.)� Pump Height: 19 3/4”� Overall Height: 22 1/4”� Width: 16”� Length: 21”
SPECIFICATIONS
� Weight: 15 lbs. (With fluid and two batteries)
� Height: 11”� Width: 8”� Depth: 6”� Power Source: 12V-DC batteries� Max. Output: 280 watts� Max. Draw: 35 amps
Hydraulic Output Pressure of 10,000, 8,800, & 6,000 PSI� Method of operation desired is permitted with three position selection switch� Fully automatic or manual “jog and hold” feature� High quality crimps are achieved with factory set pressure relief valve� Permits final inspection of connection before completing crimp cycle� Protection against hazardous shock with air- bulb actuator and air line� Heavy-duty roll cage� Saves time with quick disconnect hydraulic fittings� Oil level inspection window � Ample hydraulic capacity with 8 quart reservoir� 1-year limited warranty
Hydraulic Output Pressure of 10,000 PSI, 8,800 PSI and6,000 PSI Types GP10, GP8, and GP6� Portable pump with sturdy steel roll cage� Durable heavy-duty four (4) H.P. engine for all HYPRESS™ applications� Manual control valve for easy control of crimping and cutting
applications� Ample hydraulic capacity with 8 quart reservoir� Fast hose assembly with quick disconnect pressure matched
hydraulic couplers� Manual control valve allows user to “Jog & Hold”� 1-year limited warranty
10,000 & 6,000 PSI BATTERY POWERED HYDRAULIC PUMP � Lightweight, portable, battery powered hydraulic pump for use with
almost all BURNDY® HYPRESS™ remote tool heads and cutters� Able to operate in remote locations without electric power source� Advance and hold feature permits final inspection before completing
crimp cycle� Pump comes complete with two rechargeable batteries, rapid battery
charger, 6’ long hydraulic hose, air bulb control switch and carry strap� Choice of operation method with either mounted switch or remote
air-bulb control devices� Unit allows operation with only one battery while the other battery
recharges� Transparent reservoir allows viewing for daily checking of fluid levels� 1-year limited warranty
BURNDY® Stainless Steel Dies
FCI BURNDY® Products now manufactures “W”, “U”, “P”, and “L” type dies instainless steel. These dies are commonly used in BURNDY® mechanical, ratchet and hydraulic tools.
For generations, tool steel has been the material of choice for dies. Although func-tional, this required multiple processes including hardening and blackening toensure durability and rust protection. By switching these dies to stainless steel, thelong-term advantage to the end user is that rust is no longer an issue, durability isincreased and manufacturing times are reduced from weeks to days.
Additional benefits include laser engraving of the stainless steel dies. The laserengraving is more pronounced making it easier for installers to ensure correctmatching of dies and connectors. It also provides better die index embossment forinspectability of each connection after the crimp. All at the same price!
BURNDY® TOOLING ACCESSORIES
10,000 psi Non-Conductive Hoses� PT29900-10� 10’ x 3/16” diameter non-conductive hose with stackable couplers� PT29900-15� 15’ X 3/16” diameter non-conductive hose with stackable couplers� PT29900-25� 25’ X 3/16” diameter non-conductive hose with stackable couplers� PT29901-10� 10’ X 1/4” diameter non-conductive hose with stackable couplers� PT29901-15� 15’ x 1/4” diameter non-conductive hose with stackable couplers� PT29901-25� 25’ x 1/4” diameter non-conductive hose with stackable couplers
Replacement Couplers 10,000 psi� PT94 (male)� PT93 (female)
� See FCI-BURNDY® Products’ Master Catalog for a complete listing of crimp tool ranges, crimping dies,and other tooling accessories.
Type KOMPRESSOR™ LPHY750
SPECIFICATIONS
� Flow Rate: 3-9 GPM� Operating Pressure: 1500-2500 psi� Forced Developed: 12 Tons� Weight: 21 lbs � Length: 15.8 “ � Width: 5.5 “ � Jaw Opening: 1.65 “ � Max. Back Pressure: 250 psi� Crimp Time: Approximately 2 seconds� Conductor range: #8-750 kcmil Al/Cu
#4-556 kcmil ACSR
Remote Operated 12-Ton Low Pressure HydraulicCompression Tool� Industry exclusive visual and audible crimp indicator assures properly
completed crimps with 12 tons of force� Covers a wide range of applications with its 1.65” jaw opening� Uses all standard BURNDY® “U” dies� 350° head rotation for versatile tool head positioning allowing the user
to get into tight areas easier� Operates on open center or closed center hydraulic systems� Ergonomic handle design for better balance and to help lessen fatigue� Double acting tool for hydraulic ram advance and retraction� Industry exclusive spring back up for ram retraction if hydraulic system
shuts down� 1-year limited warranty
Nov.2003 Tools Brochure 11/20/03 3:21 PM Page 10