Upload
may-carpenter
View
222
Download
0
Tags:
Embed Size (px)
Citation preview
Scientific Measurement
Chapter 3
Measurement & Uncertainty
• Making measurements and performing calculations with measurements is very important in science and many other fields
• Any measurement has a number with a unit
• How do you know if a measurement is true?
• Are there limits to measurement?
Scientific Notation
A convenient way of writing very large and very small numbers
A way to indicate significant figuresStandard (Decimal) notation
0.00000000000030 m (radius of H atom)Scientific notation
3.0 x 10-13 mcoefficient x 10 power
first digit must be from 1 to 91.65 x 10 4 Correct format?0.053 x 10 -2 Correct format?12.63 x 10 15 Correct format?
Calculations with Scientific Notation
• Review scientific notation in your text– Read pages R56-57, Appendix C
• Your calculator uses a special key to enter scientific notation
• EE, E, Exp, Sci
• These keys mean “x 10exp” to your calculator
• Do not use 10^
Calculations with Scientific Notation
• How to enter 6.022 x 1023
• 6.022
• 2nd EE
• 23
• Your calculator screen should show 6.022E23
Calculations with Scientific Notation
• Calculate 6.52 x 1018 ÷ 4.91 x 10-5
• 6.52• 2nd EE• 18• ÷• 4.91• 2nd EE• -5• ENTER = 1.33…..E23
Accuracy, Precision, & Error
Accuracy and precision are not the same thingAccuracy
how close a measurement is to the true value (actual or accepted value)
Precisionhow close measurements agreehow exact a measurement isExample: a centigram balance (0.01g) is more precise than a decigram balance (0.1g)
Errordifference between actual and experimental value
Accuracy & Precision
Accuracy & Precision
To evaluate accuracy of a measurement:
compare measurement to true value
To evaluate precision of a measurement:
compare values of two or more repeated measurements
Uncertainty in Measurement
• All measurements are approximations• All measurements contain error, so we can
only report numbers that we know for sure (certain)
• The certainty of a measurement is determined by the precision of the measurement
• Significant figures are used to reflect certainty of measured value
Uncertainty in Measurement
• Digital instruments (like our electronic scales) estimate the final digit
• Example: 5.67 g • In this measurement, the 7 is estimated by
the scale• The uncertainty of the scale is the smallest
division reported by the scale (0.01 g)• Recording the measurement with its
uncertainty: 5.67 ± 0.01 g
Significant Figures
• All digits that are known, plus one last estimated digit
• Represent certainty of a measurement
• Must be handled properly in calculations to prevent overstating precision
• Review rules to determine significant figures (p. 66-67)
Significant Figures in Measurement
Rules for Determining Significant Figures
• All non-zeros YES
• Zeros between non-zeros YES
• Zeros at the beginning of a # NO
• Zeros at the end, to right of “.” YES
• Final zeros without “.” NO
• Final zeros with “.” YES
Significant Figures in Calculations
• Multiplication & Division– Result must have the same # of s.f. as the
measurement with the fewest s.f.– 6.221 cm x 5.2 cm = 32.3492 cm2 → 32 cm2
• Addition & Subtraction– Result may not have more decimal places
than the number with the fewest decimal places
– 20.4 + 1.322 + 83 = 104.722 → 105
Uncertainty in Measurement
• An error due to limitations of the instrument
• For a digital instrument– +/- the smallest digit– 62.56g +/- 0.01 g
• For an analog instrument– +/- the estimated digit– See example
Determining ErrorError:
the difference between the accepted and experimental measurement
Example:
Water was measured to boil at 101.5ºC
The known bp of water is 100.0ºC
Calculate the error in the measurement
C 1.5 Error
C 100.0 - C 101.5 Error
valueaccepted - valuealexperiment Error
Percent Error
Error is often better understood as a percent of the true value
Note that the numerator is absolute value!
1.5%
100x 100.0
100.0 - 101.5 error %
100x accepted
accepted - alexperiment error %
3.2 International System of Units
• SI units (System International) used to be called the metric system
• Standard units used in science
Metric Prefixes*
*Memorize these prefixes and their factors
Common Units of Volume
Mass vs. Weight
• Mass is a measure of matter
• Anything that occupies space has mass
• Weight is a force– The force of gravity acting on a mass
Temperature Scales Used in Science
• Kelvin (Absolute Temperature)
• Absolute zero 0º K = -273.15º C
no negative temps
• Celsius0 C = +273.15 K
• A Kelvin degree and a Celsius degree have the same size
Conversions Between the Celsius and Kelvin Scales
We will not use the Farenheit scale!
EnergyUnits of Energy
• Energy is the capacity to do work or to produce heat.
• The joule (J) is the SI unit of energy. • One calorie (cal) is the quantity of heat that raises
the temperature of 1 g of pure water by 1°C.
The JoulePronunciation Guide
NO
NO
YES!
• Energy can be converted into other forms, but the units are still joules (J)
• This house is equipped with solar panels. The solar panels convert the radiant energy from the sun into electrical energy that can be used to heat water and power appliances.
3.3 Conversion Problems
• Conversion Factors• Ratio of two
equivalent measurements
• 1 dozen = 12 items
dozen 1
items 12or
items 12
dozen 1
Dimensional Analysis
• When solving problems, units must be consistent
• Unit conversion are often necessary• Use conversion factors• Problem: Determine how many centimeters
are in 1 yd.
• 1 yd x 36.0 in x 2.54 cm = 91.44 cm
1 yd 1 in
3.4 Density
• Density is the ratio of mass to volume
• Density is an intensive property
• Density of a pure substance is constant at a given temperature V
md
Density
• Depends on temperaturetemp density
What if temp decreased?
• Unitsg/cm3 or g/mL for solids & liquids
g/L for gases