Schneider Electric Digest 177 Section 5: Advanced Products · EVlink™ChargingSolutions 5-2 EVlink™ChargingSolutions—Overview 5-2 ... 258-9200 - [email protected] - . 5-3 schneider-electric.us

5-1

IndoorWall-Mount

DC Quick Charging

Sola r Power Solutions

Conext™ CL

OutdoorWall-Mount

Outdoor Pedes ta l(Dua l Unit)

EVlink™ Electric Vehicle Charging Sta tions

Conext™ XW+

Conext™ Sola r Charge Controlle r

Wise r™ Air

Table of Contents

Section 5Advanced Products

EVlink™ Charging Solutions 5-2

EVlink™ Charging Solutions—Overview 5-2EVlink™ Electric Vehicle Charging Stations 5-2Indoor Charging Stations (Residential Applications) 5-3Outdoor Charging Stations 5-4Dimensions 5-5Outdoor Cloud Connected 5-6Service Plans 5-6Dimensions - Outdoor Cloud Connected 5-7EVlink DC Quick Charging 5-8

Wiser™ Energy Efficiency Solutions 5-10

Wiser™ Energy Efficiency Solutions 5-10Wiser Air 5-10Energy Efficiency Solutions Overview 5-10Wiser In-Home Display (IHD) 5-10Wiser Programmable Communicating Thermostats (PCT) 5-11Wiser Large Load Control 5-12

Residential Solar Power Solutions 5-13

Solar Inverters 5-13Conext™ CL-NA Three-Phase Grid-Tie Inverter 5-13Conext™ XW+NA Hybrid Inverter / Charger 5-14Conext™ SW-NA Hybrid Inverter / Charger 5-16Conext™ MPPT 80 600 Solar Charge Controller 5-17Conext™ MPPT 60 150 Solar Charge Controller 5-18

5ADVANCEDPRODUCTS

© 2016 Schneider Electric All Rights Reserved 3/24/2016

Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com

5-2

EVlink™ Charging Solutions EVlink™ Charging Solutions—Overview

schneider-electric.us

Class 2800 / Refer to Catalog 2800CT1001

EVlink™ Electric Vehicle Charging StationsElectric Vehicle Supply Equipment (EVSE) provides power to recharge the on-boardvehicle batteries in Electric Vehicles (EV) and Plug-in Hybrid Electric Vehicles (PHEV).The EVSE units are Level 2 type which can charge the vehicle batteries in as little as 3–6hours, depending on the vehicle type and level of battery charge. The EVSE will typicallybe fed from a 208 or 240 V source, two-pole 40 A circuit breaker or disconnect and willbe able to provide 30 A of current to the vehicle's on-board charger. All units meet orexceed SAE J1772 [1] and UL standards for electric vehicle supply equipment.Schneider Electric EVSE features include:• Integral Ground Fault Protection at 20 mA• User friendly interface to indicate power on/off, charging, system detected faults etc.• Heavy duty cord and connector which meet SAE J1772 standards• Automatic reset and restart after ground fault or main power loss• Radio Frequency Identification (RFID) authentication available for outdoor units [2]

• Available in indoor/outdoor, wall and pedestal mount, single and dual charger models• Optional advanced metering functionality available to collect and monitor energy and

demand profile data [3]

EV2430WS

EV230WSR

EV230PSRR EV230PDRR

• Charging Station with advanced communications and networking

• DC fast charging station which can charge 80% of EV in less than30 minutes

Please stay tuned at www.schneider-electric.us/go/evlink

EV 2 P D30 _ _ _R R_ __

Electric Vehicle (EV) Charging Station

Mounting Type: W = Wall P = Pedestal

Output:D = DC

Maximum Output Current:

16, 30, 80, 100, 125,150 . . .

Charging Units: S = Single D = Dual

EnclosureType: R = 3R

Features: R = Non-networked RFID

A = Advanced Features

AdvancedFeaturesCodes

Output VoltageSystem:

2 = 208/24024 = 240 only

4 = 4806 = 600

NOTE: Special order for twenty-five foot cables available with extended lead time.

5ADVANCEDPRODUCTS

[1] SAE J1772—standard for Electric Vehicles that defines common connectors and interfaces at various power levels for PHEV and EV established by Society of Automotive Engineers forNorth America.

[2] RFID—localized RFID in which the programming for the addition or removal of subscribers is done at the EVSE location.[3] Energy monitoring and metering options are available and can be added to provide networking and communication through an optional power meter enclosure. Please consult your local

Schneider Electric sales representative for selection information or call 1-888-778-2733.

© 2016 Schneider Electric All Rights Reserved

3/24/2016Courtesy of Steven Engineering, Inc. - (800) 258-9200 - [email protected] - www.stevenengineering.com

http://www.schneider-electric.us


http://www.schneider-electric.com/downloads/us/en/document/2800CT1001

http://www.schneider-electric.com/us/en/download/document/2800CT1001

5-3


EVlink™ Charging Solutions—Overview EVlink™ Charging SolutionsClass 2800 / Refer to Catalog 2800CT1001

Indoor Charging Stations (Residential Applications)

Enclosure:• Non-metallic• Indoor wall-mount

(stud, drywall, or masonry wall)

Interface:• Segmented charge and delay

charge progress indicator• Stop button and indicator• Power status and system

detected fault indicator• Delay button and indicator

Protection:• Integral Ground Fault Protection at 20 mA• Ground fault function tested before each

charge cycle begins• Auto restart after ground fault or main

power loss

Cable Holder:• Supports and helps organize the cable• Mounted independently from the enclosure

Connector and Cord:• Complies with SAE J1772• Cable length: 18 ft. (5.5 m)

Table 5.1: Indoor Charging Station—Wall-mountOutputVoltageSystem

OutputCurrent Mounting Enclosure

TypeNumber of

Charging Units Catalog Number

208–240 Vac 30 A [4] Wall 1 1 EV230WS

N L1 L2

OvercurrentProtection

Device

EV230WS208/240 V ac

EquipmentGround

SolidNeutral

208–240 V

120 V

120 V

Ground

ElectricVehicle

ChargingStation

5ADVANCEDPRODUCTS

[4] Feeder circuit breaker size = 40 A.





http://www.schneider-electric.com/products/US/en/products/EV230WS


5-4




Outdoor Charging StationsProtection:• Integral Ground Fault Protection at 20 mA• Ground fault function tested before each charge cycle begins• Auto restart after ground fault or main power loss

Authentica tion :• Loca lized RFID solution (optiona l)

Enclosure:• Metallic enclosure• Wall-mount

In te rface :• Power s ta tus• Charge indica tor• Syst em detected fault indica tor

Cable Holder:• Supports and helps organize cable• Connector storage• Mounted independently from the enclosure

Indoor / OutdoorWall-Mount

Outdoor S ingle UnitPedesta l-Mount

Outdoor Dual UnitPedes ta l-Mount

Cable and Connec tor Holders :• Supports and he lps organize cable• Connector s torage• Integra l with the enclosure

Cables and Connec tors :• Complies with SAE J1772• Cable length: 18 ft. (5.5 m)

Enclos ure :• Meta llic enclosure• Pedes ta l-mount

Mounting :• Meta llic pedes ta l

Table 5.2: Outdoor Charging StationsOutput Voltage System Application Output Current Mounting Enclosure Type Number of Charging Units Catalog Number

208–240 Vac Indoor/Outdoor 30 A [5] Wall 3R Single EV230WSR208–240 Vac Outdoor 30 A [5] Pedestal 3R Single EV230PSR208–240 Vac Outdoor 30 A [5] Pedestal 3R Dual [6] EV230PDR

Table 5.3: Outdoor Charging Stations with RFID AccessoriesOutput Voltage System Application Output Current Mounting Enclosure Type Number of Charging Units Catalog Number

208–240 Vac Indoor/Outdoor 30 A [5] Wall 3R Single EV230WSRR208–240 Vac Outdoor 30 A [5] Pedestal 3R Single EV230PSRR208–240 Vac Outdoor 30 A [5] Pedestal 3R Dual [7] EV230PDRR

Table 5.4: RFID Authentication Cards (for Applicable Level 2 Charging Stations only)[8]Description Catalog NumberRFID Handheld Programmer EVRFIDHPRFID Authentication Cards (Quantity of 10) EVRFIDKF10

EVRFIDHP EVRFIDKF10

5ADVANCEDPRODUCTS

[5] Feeder circuit breaker size = 40 A.[6] Output current per charge unit.[7] Output current per charge unit.[8] Required for charging stations with RFID Accessories.





http://www.schneider-electric.com/products/US/en/products/EV230WSRR

http://www.schneider-electric.com/products/US/en/products/EV230PSRR

http://www.schneider-electric.com/products/US/en/products/EV230PDRR


5-5



Dimensions

9.53(242)

12.7(323)

4.4(111)

9.8(250)

13.1(333)

18.1(460)

20.5(521)

6.7(170)

7.1(181)

in.(mm)Dimensions:

Indoor W all-mount Indoor/Outdoor W all-mount

7.9(200) 5.9

(150)

7.9(200)

0.70(17.5)

3.9(98)

4.1(103)2x

1.8(46)2x 4.3

(108)2x

2x

4x R 0.30(7.5)

3.0(76.2)

(bottom view)Pedestal Base

49.6(1260)

49.6(1260)

6.6(166.5)

6.6(166.5)

7.9(200)

7.9(200)

5.2(133)

Single Unit Dual Unit

13.0(330)

6.7(170)

13.0(330)

in.(mm)Dimensions:

Pedestal-Mounted Charging Stations5

ADVANCEDPRODUCTS






5-6




Outdoor Cloud ConnectedFeatures

In te rface :

• Backlit color LCD screen displays chargingins tructions , charging s ta tus , and usage fees

• Red indica tor lights on front pan e l for sys temdetected faults

Holders for Connec tor and Cable :

• Support and he lp organize cables• Connector s torage dock• Integra l with the enclosure

Connec tor and Cable :

• Complies with SAE J1772• Cable length: 18 ft. (5.5 mete r)

Enc los ure and Mounting :

• Meta llic enclosure• Meta llic mounting pedes ta l

Pro tec tion :

• Integra l Ground Fault Protection a t 20 mA• Ground fault function tes ted before each charge

cycle begins• Auto res ta rt a fte r ground fault or main power loss

Authen tica tion :

• ChargePoint® card or Contactless credit ca rd• Track cus tomer usage his tory• Optiona l payment by time/energy usage

Network Connectivity(non-gateway units , s ing le antenna):

• IEEE 802.15.4 wire less communica tionwith gateway unit

• 150 ft (45 m) near line of s ightcommunica tion range

Network Connec tivity(ga teway unit, two antennae):

• Wire less communica tion to server via ce llular ne twork• IEEE 802.15.4 wire less communica tion with non-ga teway units• S ta tion loca tion and occupancy s ta tus via ne twork• Remote monitoring of s ta tus and power usage• Enables remote maintenance servicesNOTE: At leas t one gateway unit is required for each clus ter of CloudConnected charging sta tions within a 150 ft. line of sight. A gatewayunit es tablishes a cellular connection for each non-gateway (CloudConnected) unit on a clus ter. A gateway unit is required for a s ingle-unit ins ta lla tion.

NOTE: Dual ga teway charging unit shown.

Commerc ia l Applica tions

NOTE: Us e on veh ic les with an SAE J 1772 complian t connectorwith s ilver p la ted con tac ts on ly. Go to www.s chne idere lec tric .us /s ites /us /en /s upport/ documen ts -downloads .page or ca ll1-888-778-2733 for a lis t o f compatib le veh ic les .

NOTE: Service plan requ ired .

Table 5.5: Outdoor Cloud Connected Charging Stations (service plan required)Catalog Number Unit Type Input Voltage

System Output Current Mounting Type Charging Units

EV230PSRACG Gateway 208–240 Vac 30 A [9] Pedestal SingleEV230PSRANG Non-Gateway 208–240 Vac 30 A [9] Pedestal SingleEV230PDRACG Gateway 208–240 Vac 30 A [9] Pedestal Dual

EV230PDRACNG Non-Gateway 208–240 Vac 30 A [9] Pedestal DualEV230WDRACG Gateway 208–240 Vac 30 A [9] Wall Dual

EV230WDRACNG Non-Gateway 208–240 Vac 30 A [9] Wall Dual

Service PlansService plans provide Cloud Connected (Networked) station owners the ability toremotely manage their EV charging stations with features including flexible managementtools, in-depth data analysis, payment processing, and 24/7 driver support. Serviceplans are required with purchase of a Cloud Connected EVlink unit.

Table 5.6: Outdoor Charging StationsCatalog Number Type Service Length FeaturesEVNETCOMM1

Commercial

1 year • Set pricing flexibility• Provide multiple payment options• Collect payment automatically• Offer reservations• Advertise• Report revenue

EVNETCOMM2 2 year

EVNETCOMM3 3 year

EVNETSP1Service Provider

1 year All capabilities of Commercial, plus:• Create driver-branded website• Manage energy load• Analyze driver use patterns

EVNETSP2 2 yearEVNETSP3 3 year

Table 5.7: Accessories [10]Catalog Number DescriptionEVNETKF50 ChargePoint cards

5ADVANCEDPRODUCTS

[9] Feeder circuit breaker size = 40 A.[10] Required for charging stations with RFID Accessories.





http://www.schneider-electric.com/products/US/en/products/EV230PSRACG

http://www.schneider-electric.com/products/US/en/products/EV230PSRANG

http://www.schneider-electric.com/products/US/en/products/EV230PDRACG

http://www.schneider-electric.com/products/US/en/products/EV230PDRACNG

http://www.schneider-electric.com/products/US/en/products/EV230WDRACG

http://www.schneider-electric.com/products/US/en/products/EV230WDRACNG

http://www.schneider-electric.com/products/US/en/products/EVNETCOMM1



http://www.schneider-electric.com/products/US/en/products/EVNETSP1




5-7



Dimensions - Outdoor Cloud ConnectedCloud Connected Pedestal-Mount Charging Stations

49.9(1267)

0.87(22)

6.7(170)

7.9(200)

7.9(200)

5.2(133)

Single Unit Dual Unit

13.0(330)

7.0(179)

13.0(330)

in.(mm)

Dimens ions :* NOTE: Left antenna is present on gateway units only.

See Note *

Pedestal Base for Outdoor Charging Stations

7.9(200)

5.9(150)

7.9(200)

0.7 0(17.5)

3.9(98)

4.1(103 )2x

1.8(46)2x 4.3

(108)2x

2x

4x R 0.30(7.5)

3.0(76.2)

Dimens ions : in.(mm)

5ADVANCEDPRODUCTS






5-8




EVlink DC Quick ChargingThe EVlink DC Quick Charger is a top choice to power battery electric vehicles (BEV)today. It is designed for quick charging in retail and commercial parking spaces, fleetcharging stations, highway rest areas, etc. The DC Quick Charger utilizes a CHAdeMOpower connector and SAE Combination Charging System (CCS) connector with 50 kWDC output. It also has a 3G and Ethernet network interface.The EVlink DC Quick Charger is compatible with OCPP 1.5 network interface commandsfor monitoring and control and has both 3G modem and Ethernet connection available,but only one may be connected at a time. Under both connection scenariosrecommended, IP address configuration is with a Public Static IP. It is also possible to setup and utilize a Virtual Private Network (VPN) for communications.

DisplayPush buttons

SAE combinationCCS charging plug

Radio frequency identification(RFID) card reader

CHAdeMO plug

Emergency stop button

Table 5.8: DC Quick Charging StationsCatalog Number Authentication Input

Voltage Input Current Output Voltage Output Current Mounting Type Charging Units Application

EVDC48050CHA RFID 480 V 79 A 50–500 Vdc 125 A max Pedestal Single CHAdeMO OutdoorEVDC48050-

CHACCS RFID 480 V 79 A 50–500 Vdc 125 A max Pedestal 1 CHAdeMO, 1SAE Outdoor

Table 5.9: AccessoriesCatalog Number Description

EVDCRFIDKF DC Quick Authentication Cards (Qty. of 10)

5ADVANCEDPRODUCTS





http://www.schneider-electric.com/products/US/en/products/EVDC48050CHA

http://www.schneider-electric.com/products/US/en/products/ EVDC48050CHACCS

http://www.schneider-electric.com/products/US/en/products/ EVDC48050CHACCS

http://www.schneider-electric.com/products/US/en/products/EVDCRFIDKF


5-9



EVlink

000

000

charging solutions

TM

Table 5.10: Weight and DimensionsWeight Height Width Depth

1,617 lbs. (734 kg) 66.9 in. (1700 mm) 35.4 in. (900 mm) 23.6 in. (600 mm)

5ADVANCEDPRODUCTS






5-10

Wiser™ Energy Efficiency Solutions Wiser™ Energy Efficiency Solutions


Wiser Air

Wiser Air is a complete home energy management solution that gives you peace of mindthrough effortless control of comfort and savings. Wiser Air works with most heating andcooling low voltage systems and connects to your home Wi-Fi to allow you to see yourenergy use remotely, using a smart phone, tablet, or laptop.• Simplicity – Wiser Air is easy to install and has a sleek, intuitive design with familiar

touch screen display to keep you informed.• Comfort – Enjoy features like Comfort Boost that quickly delivers comfort at the touch

of a button and helps you use energy more efficiently.• Insight – See how your system is running from a distance, with Wiser Pulse that

glows a different color depending on different modes.• Control – Control and manage your home energy use from anywhere with your smart

phone, tablet or laptop. Wiser Air is a stand-alone, Wi-Fi thermostat.

Energy Efficiency Solutions OverviewWiser Energy Efficiency products can give you information about your home's energyconsumption and provide ways to conveniently automate energy use. Informationdisplays can be conveniently located and easily integrated with Smart Grid energyprograms. In addition, these devices provide useful information displays such as timeand temperature.HVAC thermostats, an in-home display, and load controls are designed to integrate into aseamless energy control system, allowing you to easily Make the Most of YourEnergySM.Schneider Electric Energy Efficiency Products:• Use industry standard radio interfaces. Products are certified to the ZigBee® Smart

Energy protocol• Provide easy to use, conveniently located controls• Signal energy with vivid color display screens• Are designed to be integrated into Smart Grid energy efficiency programs• Are certified to UL916, and UL489 (as applicable)• Incorporate convenience features, such as remote thermostat control, time-of-day

display, remote load control, and load scheduling• Load controls are available in outdoor configurations

Color Based Energy Signaling

Wiser In-Home Display (IHD)

EER20100

• Internal rechargable battery for power outages and convenience• Integrates with remote measurement devices, and graphically displays energy use

and signals based on demand• Schedules Wiser components, such as load controls, load relays, and smart plugs• Controls Wiser thermostats from remote locations• Automatically sets time from the network• Displays time• Displays outdoor temperature (optional components required)

Table 5.11: Wiser In-Home Display (IHD)Model Industry Specifications Power

EER20100• UL Standard 916• Canadian Standard CAN/CSA C22.2, No. 205

• ZigBee® Smart Energy

100–240 Vac50–60 Hz

5ADVANCEDPRODUCTS





http://www.schneider-electric.com/products/US/en/products/EER20100

5-11



Wiser Programmable Communicating Thermostats (PCT)

EER56000EER56100

• Offers four programmable temperature changes per day for up to seven days• Supports demand response through ZigBee® Smart Energy Profile• Integrates with remote measurement devices, and graphically displays energy use

and signals based on demand• Schedules Wiser components, such as load controls, load relays, and smart plugs• Automatically sets time from the network• Displays outdoor temperature (optional components required)• No batteries required, operates in four wire installations

Table 5.12: Wiser Programmable Communicating Thermostats (PCT)Model Industry Specifications Power

EER56000

• UL Standard 916• Canadian Standard CAN/CSA C22.2, No. 205-M1983


• Single stage conventional heat/cool

• Heat pump (two stage heat / single stage cool)

• Dual fuel heat pump (two stage heat / single stage cool)

100–240 Vac50–60 Hz

EER56100



• Single stage conventional heat/cool

• Two stage conventional (two stage heat / two stage cool)

• Heat pump and geothermal heat pump (two stage heat / singlestage cool)

• Two-speed heat pump and two-speed geothermal heat pump (threestage heat / two stage cool)

• Dual fuel heat pump and geothermal dual fuel heat pump

• Humidifier and dehumidifier control

100–240 Vac50–60 Hz

Wiser Smart Plug

EER41200

• Supports demand response through ZigBee® Smart Energy Profile• Plugs into 120 V electrical outlets• Measures power used by electrical outlet loads• Provides scheduling and remote control when used with the EER20100 Wiser In-

Home Display or the EER56000/EER56100 Wiser Programmable CommunicatingThermostats

Table 5.13: Wiser Smart PlugModel Industry Specifications Power

EER41200• UL Standard 508 and UL 244A• Canadian Standard CAN/CSA C22.2, No. 14-05


100–240 Vac50–60 Hz

Wiser Load Control Relays

EER42200EER42300

• Supports demand response through ZigBee® Smart Energy Profile• Low voltage 120 and 240 V relays• Measures power used by electrical outlet loads• Provides scheduling and remote control when used with the EER20100 Wiser In-

Home Display or the EER56000/EER56100 Wiser Programmable CommunicatingThermostats

• EER42300 provides isolated contact outputs

Table 5.14: Wiser Load Control RelaysModel Industry Specifications Power

EER42200



• Supply voltage: 100–250 Vac, 50/60 Hz

30 A, 240 Vac30 A, 28 Vdc2 hp, 240 Vac1 hp, 120 Vac

EER42300




5 A, 240 Vac5 A, 28 Vdc240 VA, 240 Vac

5ADVANCEDPRODUCTS










5-12



Wiser Large Load Control

EER260LLCR

• Supports demand response through ZigBee® Smart Energy Profile• Used with Square D™ QOPL-ILC circuit breaker devices, ordered separately• Measures branch circuit loading (current transformer required, ordered separately)• Provides remote control when used with the EER20100 In-Home Display or the

EER56000/EER56100 Wiser Programmable Communicating Thermostats• Provides remote disconnect switch functions

EER260LLCCT1EER260LLCCT2

Table 5.15: Wiser Large Load ControlModel Industry Specifications Load Contacts

EER260LLCR• UL489• ZigBee® Smart Energy

• 120 / 240 Vac, 1P/2P, 50/60 Hz

QOPL-ILC circuit breaker (seeTable 29.10, page 5-12)

EER260LLCCT1 • 1P 60 A current transformer —EER260LLCCT2 • 2P 60 A current transformer —

Table 5.16: QOPL-ILC Circuit BreakersCatalog Number Rating (A) No. of Poles AIC Rating (kA)

QO115PLILC 15 1 10QO120PLILC 20 1 10QO230PLILC 30 2 10QO240PLILC 40 2 10QO250PLILC 50 2 10QO260PLILC 60 2 10

Wiser Ethernet Gateway

EER21100EER21200

• Allows for software monitoring, programming, and control of Wiser Energy Efficiencyproducts via the internet

• Used with the Wiser Head End Server system

Table 5.17: Wiser Ethernet GatewayModel Industry Specifications

EER21100

• ZigBee® router-type device

• UL power adapter



EER21200

• ZigBee® coordinator-type device

• UL power adapter



Wiser Accessories

EER57000

• Trim ring can be used to conceal mounting imperfections, such as holes and paintlines from previous installations

• External temperature sensor provides temperature measurements when used with theEER56100 Wiser thermostat

• The Wiser Wire Extender is used when a common wire is not present to power Wiserthermostats

EER57100

EER57200

Table 5.18: Wiser AccessoriesModel Name Industry Specifications

EER57000 Trim Ring —

EER57100 Auxiliary Power Supply • UL Standard 916• Canadian Standard CAN/CSA C22.2, No. 205-M1983

EER57200 External Temperature Sensor —5

ADVANCEDPRODUCTS





http://www.schneider-electric.com/products/US/en/products/EER260LLCR

http://www.schneider-electric.com/products/US/en/products/EER260LLCCT1

http://www.schneider-electric.com/products/US/en/products/EER260LLCCT2

http://www.schneider-electric.com/products/US/en/products/QO115PLILC











5-13


Solar Inverters Residential Solar Power Solutions

Conext™ CL-NA Three-Phase Grid-Tie Inverter

Schneider Electric ConextCL 18 / 25 / 40 kW

String Inverter with Wiring Box

The Conext™ CL Series is a new line of three-phase string inverters designed for highefficiency, maximum flexibility, and easy installation and service. Electrolyte-free designwith Schneider Electric’s rigorous reliability test procedures improve the long-termreliability. Integrated wiring box with multiple options allow for flexible and low-costinstallations. Remote asset management and troubleshooting are easier than ever withSchneider Electric Conext SmartBox and Conext Insight portal. Decentralizedarchitecture and system capability together with a broad range of medium voltageproducts make Conext CL the ideal choice for commercial buildings and decentralizedpower plants. Backed by global service infrastructure, leading manufacturing facilities,and expertise in energy management, the Conext CL Series is the inverter trusted forquality and reliability.

Features• High conversion efficiency: 98.4% peak efficiency,

98.0% CEC efficiency• Large heatsink offers excellent heat dispersion

without the need for a cooling fan• Integrated wiring box saves customer the cost of

external DC combiner box[1]• Built-in Cloud Connect feature to allow direct

connection to Conext Insight portal for free remotemonitoring

• Robust design through rigorous MultipleEnvironmental Over Stress Testing (MEOST),Highly Accelerated Life Test (HALT) andTemperature Humidity and Bias Testing (THB)

• Electrolyte-free design to guard against dried capissue and help to improve long-term reliability

• Designed and qualified for applications in tropicalenvironments through salt fog testing and use ofconformal coating

• SunSpect Alliance profile, wire line and wireless(optional) communication

• Easy installation and service, including pre-wiredwiring box, detachable inverter, and EasyConfigtool to allow for fast commissioning.

Table 5.19: Conext™ CL-NA SeriesElectrical Specifications CL18000 NA CL25000 NA CL40000 NA [2]

Input (DC)Full Power MPPT Voltage Range 300–800 V 500–800 V 540–800 VOperating Voltage Range 250–1000 V 250–1000 V 250–1000 VMax. Input Voltage, open circuit 1000 V 1000 V 1000 VNumber of MPPT / Strings perMPPT [3] 2 / 4 2 / 4 1 / 10

Absolute Max. Short CircuitCurrent per MPPT 36 A 36 A 108 A

Nominal DC Input Power 19 kW 26.5 kW 42 kWMax. DC Input Power per MPPT[4] 11.4 kW 15.9 kW 42 kW

DC Connection (in wiring box) Base model: spring cage clamp connector;Essential and Optimum models: fuse holder

Screw typefuse holder

Output (AC)Rated Output Power (PF=1) 18 kW 25 kW 40 kWMax. Apparent Power 18 kW 25 kW 40 kWNominal Output Voltage 277 / 480 V 277 / 480 V 277 / 480 VAC Voltage Range 244–305 V / 422–528 V 244–305 V / 422–528 V 244–305 V / 422–528 VFrequency 60 Hz 60 Hz 60 HzFrequency Range (adjustable) 60 +/- 3 Hz 60 +/- 3 Hz 60 +/- 3 HzMax. Output Current 25 A 33 A 50 ANominal Continuous OutputCurrent 21.7 A 30.1 A 48.1 A

Total Harmonic Distortion < 3% < 3% < 3%Power Factor (adjustable) 0.8 lead to 0.8 lag 0.8 lead to 0.8 lag 0.8 lead to 0.8 lagAC Connection (in wiring box) Bottom and side conduit / cable entry, spring cage clamp connector.EfficiencyPeak 98.0% 98.4% 98.4%CEC 97.5% 98.0% 98.0%General SpecificationsPower Consumption at Night Time < 3 W < 3 W < 3 WEnclosure Rating Type 4 (electronics) Type 4 (electronics) Type 4 (electronics)Cooling Fan cooled Fan cooled Fan cooledInverter Weight 119 lb. (54 kg) 119 lb. (54 kg) 137 lb. (62 kg)Wiring Box Weight 33 lb. (15 kg) 33 lb. (15 kg) 51 lb. (23 kg)Inverter Dimensions(H x W x D)

28.1 x 26.5 x 10.5 in.(71.4 x 67.4 x 26.8 cm)

28.1 x 26.5 x 10.5 in.(71.4 x 67.4 x 26.8 cm)

28.1 x 26.7 x 12.0 in.(71.4 x 67.8 x 30.7 cm)

Wiring Box Dimensions(H x W x D)

14.2 x 26.5 x 10.5 in.(36.1 x 67.4 x 26.8 cm)

14.2 x 26.5 x 10.5 in.(36.1 x 67.4 x 26.8 cm)

15.6 x 26.7 x 12.0 in.(39.6 x 67.8 x 30.7 cm)

Ambient Air Temp. for Operation -13 to 140°F(-20 to 60°C)

-13 to 140°F(-20 to 60°C)

-13 to 140°F(-20 to 60°C)

Max Operating Altitude w/oDerating 6560 ft. (2000 m) 6560 ft. (2000 m) 6560 ft. (2000 m)

Relative Humidity % 4...100 condensing 4...100 condensing 4...100 condensingNoise Emission (at 1 m distance) < 55 dBA < 55 dBA < 58 dBA

5ADVANCEDPRODUCTS

[1] An external fuse protection shall be installed if base model from available product variants is chosen.[2] Preliminary specification. Specifications are subject to change without notice.[3] Base model 2/1.[4] Under unbalanced condition.





5-14

Residential Solar Power Solutions Solar Inverters


Conext™ XW+NA Hybrid Inverter / ChargerOne solution for global power needsConext XW+ is an adapatable single- and three-phase inverter / charger system withgrid-tie functionality and dual AC power inputs. Available solar charge controllers,monitoring, and automated generator control modules enable further adaptability. From asingle Conext XW+ unit to clusters up to 102 kW, the Conext XW+ is a scalable systemthat allows for the integration of solar capacity as required. Adaptable and scalable, theSchneider Electric Conext XW+ system is the one solution for grid-interactive and off-grid, residential and commercial, solar and backup power applications.

Conext XW+NAHybrid Inverter / Charger

Features• Excellent load starting with high 30-minute and

5-second power• Performs in hot environments up to 158°F (70°C)• Intelligent functionality enables solar prioritization, load shifting, peak shaving, and

assists small generators with heavy loads• Backup power with grid-tie functionality converts external DC power to AC power for

export to the utility grid• Single or three-phase systems from 7.0 to 102 kW• Supports DC coupled and AC coupled off-grid and grid-tie architectures• Supports charging of Lithium Ion battery packs• Field serviceable with replacement boards and

spare parts• Monitor, troubleshoot, or upgrade firmware with Conext ComBox• Extensive quality and reliability testing• Highly Accelerated Life Testing (HALT)• Globally proven and recognized field performance• System configures quickly into compact wall-mounted system• Integrates both grid and generator power with dual AC inputs• Balance-of-system components integrates battery bank, solar charger controllers and

generators• Commission the entire system with PC software tool and Conext ComBox

5ADVANCEDPRODUCTS





5-15



Table 5.20: Conext™ XW+ Series (120/240 V)Electrical Specifications XW+ 5548 NA XW+ 6848 NA

Inverter AC OutputOutput Power (continuous) at 77°F (25°C) 5500 W 6800 WOverload 30 min / 60 sec at 77°F (25°C) 7000 W / 9500 W 8500 W / 12000 WOutput Power (continuous) at 104°F (40°C) 4500 W 6000 WMaximum Output Current 60 sec (rms) 82 A (120 V); 41 A (240 V) 102 A (120 V); 52 A (240 V)Output Frequency (selectable) 50 / 60 Hz 50 / 60 HzOutput Voltage L-N: 120 V +/- 3%; L-L: 240 V +/- 3%Total Harmonic Distortion (THD) at Rated Power < 5% < 5%Idle Consumption Search Mode < 8 W < 8 WInput DC Voltage Range 42–60 V (48 V nominal) 42–60 V (48 V nominal)Max Input DC Current 150 A 180 ACharger DC OutputMax. Output Charge Current 110 A 140 AOutput Voltage Range 40–64 V (48 V Nominal) 40–64 V (48 V Nominal)Charge Control Three stage, two stage, boost, customCharge Temperature Compensation Battery temperature sensor includedPower Factor Corrected Charging 0.98 0.98Compatible Battery Types Flooded (default), GEL, AGM, LiON, Custom [5]Battery Bank Range (scaled to PV array size) 440–10000 Ah 440–10000 AhAC InputAC 1 (grid) Input Current (selectable limit) 30–60 A (60 A default) 30–60 A (60 A default)AC 2 (generator) Input Current (selectable limit) 30–60 A (60 A default) 30–60 A (60 A default)Automatic Transfer Relay Rating/Typical Transfer Time 60 A / 8 ms 60 A / 8 msAC Input Voltage Limits (bypass/charge mode) L-N: 78–140 V (120 V nominal) L-L: 160–270 V (240 V nominal)AC Input Frequency Range (bypass/charge mode) 55–65 Hz (default); 52–68 Hz (allowable)AC Grid-Tie Output

Grid Sell Current Range on AC1 (selectable limit) 0–40 A (120 V)0–20 A (240 V)

0–48 A (120 V)0–27 A (240 V)

Grid Sell Voltage Range on AC1 L-N: 105.5–132 V +/-1.5 V; L-L: 211–264 V +/- 3 VGrid Sell Frequency Range on AC1 (auto adjust entering sell mode) 59.4–60.4 +/-0.5 HzEfficiencyPeak 95.7% 95.7%CEC Weighted Efficiency 93.0% 92.5%General SpecificationsPart Number 865–5548–01 865–6848–01Product / Shipping Weight 118 lb. (53.5 kg)/165 lb. (75 kg) 121.7 lb. (55.2 kg)/169 lb. (76.7 kg)Product Dimensions (H x W x D) 23 x 16 x 9 in. (58 x 41 x 23 cm) 23 x 16 x 9 in. (58 x 41 x 23 cm)

Shipping Dimensions (H x W x D) 28.0 x 22.5 x 15.5 in.(71.1 x 57.2 x 39.4 cm)

28.0 x 22.5 x 15.5 in.(71.1 x 57.2 x 39.4 cm)

IP Degree of Protection NEMA Type 1 IndoorOperating Air Temperature Range –13–158°F (–25–70°C) power derated above 77°F (25°C)Warranty (depending on the country of installation) 2 or 5 years 2 or 5 yearsFeaturesSystem Monitoring and Network Communications Available AvailableIntelligent Features Grid sell, peak load shave, generator support, prioritized consumption of battery or external DC energyAuxiliary Port 0–12 V, maximum 250 mA DC output, selectable triggersOff-grid AC Coupling Frequency Control

Multi-unit Operation Single and split phase: up to four units in parallel, three phase: up to 12 units in multi-cluster configuration withexternal AC contractor

Regulatory ApprovalSafety UL1741, CSA 107.1EMC Directive FCC and Industry Canada Class BInterconnect IEEE 1547 and CSA 107.1Compatible ProductsConext XW+ Power Distribution Panel 865–1014–01Conext System Control Panel 865–1050Conext Automation Generator Start 865–1060Conext MPPT 60 150 865–1030–1Conext MPPT 80 600 865–1032Conext ComBox 865–1058Conext Battery Monitor 865–1080–01Conext Battery Fuse Combiner Box 865–1031–01Conext Portable Installation / Configuration Tool 865–1155–01

5ADVANCEDPRODUCTS

[5] Specifications subject to change without notice.





5-16



Conext™ SW-NA Hybrid Inverter / ChargerConext SW delivers new value and price point to installers and system owners globally.Perfect for off-grid, backup power and self-consumption applications, it’s a pure sinewave, inverter/charger system with switchable 50/60 Hz frequencies, providing power forevery need.North American Conext SW units feature 120/240 V ac output, and is capable ofproducing 120/240 Vac output from a 120 Vac input, without the need for an externaltransformer.For expanded off-grid capacity, the Conext SW is integrated with fuel-based generatorsas required to support loads larger than the generator’s output. It’s also self consumptionready, able to prioritize solar consumption over the grid, while maintaining zero gridexport. The Conext SW works with the grid to avoid peak utility charges and support thegrid when utility supply is limited. Accessories include pre-wired universal DC and ACdistribution panels. Stacking two Conext SW units will double the system’s total outputpower and available solar charge controllers allow for the integration of solar capacity asrequired.

Conext SW-NA Inverter / Charger

Features• Higher return on investment• Excellent load start capabilities with high 30-

minute and 5-second surge power• Harness the continuously declining production

cost of solar power• Robust design through rigorous reliability testing

(HALT)• Available in 24 and 48 Vdc models. All models

support both 50 and 60 Hz output• Stack two units to double output power up to 8 kW• Supports AC and DC coupled off-grid and grid-tie

architectures• Intelligent functionality enables self-consumption

with solar prioritization, peak shaving, andassisting small generators with heavy loads

• Monitor, troubleshoot or upgrade firmware withConext ComBox

• Global support and training• Replaceable boards and spare parts• Configures quickly into compact wall-mounted

system• Companion circuit breaker panels integrate

inverter with battery bank and solar chargecontrollers

• Mounting bracket design makes hanging inverteron the wall easy

Table 5.21: Conext SW Inverter/ChargerElectrical Specifications SW 2524 NA SW 4024 NA SW 4048 NA

InverterOutput Power (continuous) at 77°F (25°C) 2400 W 3400 W 3800 WOutput Power 30 min. at 77°F (25°C) 2700 W 4000 W 4400 WOutput Power (5 sec) at 77°F (25°C) 5000 W 7000 W 7000 WPeak Current 24.3 A 41 A 41 AOutput Frequency (selectable) 50 / 60 Hz 50 / 60 Hz 50 / 60 HzOutput Voltage 120 / 240 Vac 120 / 240 Vac 120 / 240 VacOutput Wave Form True Sine Wave True Sine Wave True Sine WaveOptimal Efficiency 91.5% 92% 92%Idle Consumption Search Mode < 11 W < 11 W < 11 WInput DC Voltage Range 20–34 Vdc 20–34 Vdc 4–68 VdcAC Connections Single / Split Phase Single / Split Phase Single / Split PhaseChargerOutput Current 65 A 90 A 45 ANominal Output Voltage 24 Vdc 24 Vdc 48 VdcOutput Voltage Range 12–32 Vdc 12–32 Vdc 24–64 VdcCharge Control 3 stage 3 stage 3 stageCharge Temperature Compensation Yes-BTS Included Yes-BTS Included Yes-BTS IncludedOptimal Efficiency 90% 90% 90%AC Input Power Factor > 0.98 > 0.98 > 0.98Input Current 9 A 13 A 13 AInput AC Voltage 120 / 240 Vac Split Phase

Input AC Voltage Range Line to Neutral 95–135 Vac Single Phase135–270 Vac Single Phase

Dead Battery Charge Yes [6] Yes [6] Yes [6]General SpecificationsCompatible Battery Types FLA, Gel, AGM, CustomTransfer Relay Rating 30 A 30 A 30 ATransfer Time (AC to Inverter to AC) < 1 cycle (16.7 ms)Optimal Operating Temperature Range -4–140°F (-20–60°C)Storage Ambient Temperature Range -40–185°F (-40–85°C)Humidity Operation / Storage < =95% RH, non-condensingIngress Protection Rating Indoor Only, IP20Altitude (operating) 6562 ft. (2000 m)Product Weight 49.0 lb. (22.3 kg) 62.0 lb. (28.1 kg) 62.0 lb. (28.1 kg)Shipping Weight 60.0 lb. (27.2 kg) 77.1 lb. (35.0 kg) 77.1 lb. (35.0 kg)Product Dimensions (H x W x D) 16.5 x 13.4 x 7.6 in. (41.8 x 34.1 x 19.7 cm)Shipping Dimensions (H x W x D) 22.0 x 17.3 x 12.6 in. (56.0 x 44.0 x 32.0 cm)System Network and Remote Monitoring Available Available AvailableWarranty (Depending on the Country ofInstallation) 2 or 5 years 2 or 5 years 2 or 5 years

Part Number 865–2524 865–4024 865–4048Regulatory ApprovalsSafety c(CSA) us mark, CSA C22.2 No. 107.1–01, UL1741 Ed. 2Compatible ProductsUniversal DC Distribution Panel 865–5548–01AC Distribution Panel (120/240 V) 865–1017AC Distribution Panel (230 V) 865–1017–61Conext System Control Panel 865–1050Conext Automation Generator Start 865–1060Conext ComBox 865–1058Conext MPPT 60 150 Solar ChargeController 865–1030–1

Conext SW On/Off Remote Switch 865–1052Conext SW Stacking Kit 865–1019–61 for 230 V ac, 865–1019 for 120/240 VacConext Portable Installation andConfiguration Tool 865–1155–01

[6] Specifications to change without notice.

5ADVANCEDPRODUCTS





5-17



Conext™ MPPT 80 600 Solar Charge ControllerThe Conext MPPT 80 600 solar charge controller offers an industry-first set of integrationfeatures and top performance that allows for large photovoltaic (PV) array systems to beeasily installed and connected to the battery bank at the lowest overall cost. Installingone MPPT 80 600 is faster than installing multiple smaller charge controller and lowersoverall costs further by utilizing fewer PV strings, smaller wiring and conduit, and byeliminating the need for PV combiner boxes and DC circuit breakers. Longer distancesfrom array site to battery bank are also easier to accommodate than with smaller chargecontrollers. Advanced Fast Sweep Maximum Power Point Tracking (MPPT) chargingtechnology helps harvest the most energy available from the PV array, even in partialshade conditions. 80 A of battery charge current allows for the connection of PV arraysrated up to 600 V STC (2560 W for 24 V systems, 4800 W for 48 V systems).

MPPT Solar Charge Controller

Features• Installs faster with fewer costly components• Improve battery life with selectable multi-stage

temperature compensated charging• Harvest more energy with shade tolerant fast

sweep MPPT algorithm• Robust design through rigorous Multiple

Environmental Over Stress Testing (MEOST)• Available remote monitoring and configuration• Compatible with any brand of PV module, any

grounding method• Stand-alone application or full integration with

Context XW inverter charger system• Fewer string wires• Smaller AWG wire• No need for combiner box or GFI circuit breaker

Table 5.22: Conext MPPT 80 600 Solar Charge ControllerElectrical Specifications [7] MPPT 80 600

InverterNominal Battery Voltage 24 and 48 (default is 48 V)PV Array Operating Voltage 195–550 VMax. PV Array Open Circuit Voltage 600 V (including temperature correction factor)Battery Voltage Operating Range 16 to 67 V dcArray Short-circuit Current 35 A (28 A at STC)Max. Charge Current 80 AMax. and Min. Wire Size in Conduit #6 to #14 AWGMax. Output Power 2560 W (nominal 24 V), 4800 W (nominal 48 V)

Charger Regulation MethodThree-stage [8]Two-stage [9]

Supported Battery Types Flooded, GEL, AGM, CustomEfficiencyMax. Power Conversion Efficiency 94% (nominal 24 V), 96% (nominal 48 V)General SpecificationsPower Consumption (night time) < 1 WBattery Temperature Sensor IncludedAuxiliary Output Dry Contact Switching up to 60 V dc, 30 V ac, 8 AEnclosure Material Indoor, ventilated, sheet metal chassis with 2.2 and 2.8 cm

knockouts and aluminum heat sinkIP Degree of Protection IP 20Product Weight 29.8 lb. (13.5 kg)Shipping Weight 38.3 lb. (17.4 kg)Product Dimensions (H x W x D) 30.0 x 8.6 x 8.6 in. (76.0 x 22.0 x 22.0 cm)Shipping Dimensions (H x W x D) 34.3 x 13.0 x 10.6 in. (87.0 x 33.0 x 27.0 cm)Device Mounting Vertical wall-mountAmbient Air Temperature for Operation -4–149°F (-20–65°C)Storage Temperature Range -40–185°F (-40–85°C)Operating Altitude Sea level to 6562 ft. (2000 m)System Network and Remote Monitoring AvailableWarranty 5 year standardPart Number 865–1032Regulatory Approval

Safety CSA Certified (UL1741, CSA 107.1) and CE Marked for LowVoltage Directive (EN50178)

EMC FCC and Industry Canada (Class B), CE Marked for theEMC Directive (EN61000-6-1, -6-3), C-Tick Compliant

Compatible Products

Conext XW+ Interver/Charger (230 V) XW 7048 E product no. 865-7048-61XW 8548 E product no. 865-8548-61

Conext XW+ Interver/Charger (120/240 V) XW 5548 NA product no. 865-5548-01XW 6848 NA product no. 865-6848-01

Conext SW (230 V)SW 2524 product no. 865-2524-61SW 4024 product no. 865-4024-61SW 4048 product no. 865-4048-61

Conext SW (120 V)SW 2524 product no. 865-2524SW 4024 product no. 865-4024SW 4048 product no. 865-4048

Conext System Control Panel 865–1050Conext Automatic Generator Start 865–1060Conext ComBox 865–1058Conext Portable Installation and Configuration Tool 865–1155–01

5ADVANCEDPRODUCTS

[7] Specifications are subject to change without notice.[8] Bulk, absorption, float, plus manual equalization.[9] Bulk, absorption, plus manual equalization.





5-18



Conext™ MPPT 60 150 Solar Charge ControllerThe Conext MPPT 60 150 is a photovoltaic (PV) charge controller that tracks themaximum power point of a PV array to deliver the maximum available current forcharging batteries. When charging, the MPPT 60 150 regulates battery voltage andoutput current based on the amount of energy available from the PV array and state-of-charge of the battery.

MPPT Multi-Stage Charging

Features• Maximum Power Point Tracking (MPPT) algorithm

continually seeks the maximum power availablefrom the PV array

• Improve battery life with selectable multi-stagetemperature compensated charging

• Five year standard warranty• Stand-alone application or full integration with

Context XW and Conext SW inverter chargersystem

• Compatible with any brand of PV Module• Available remote monitoring and configuration• LCD screen with face plate buttons for

configuration and system monitoring• Integrated PV ground fault protection for negative

grounded arrays

Table 5.23: Conext MPPT 60 150 Solar Charge ControllerElectrical Specifications [10] MPPT 60 150

InverterNominal Battery Voltage 12, 24, 36, 48, 60 VBattery Voltage Operating Range 0–80 V dcPV Array Operating Voltage 140 VMax. PV Array Open Circuit Voltage 150 V (including temperature correction factor)Max. Array Short-circuit Current 60 A [11]Max. Charge Current 60 A [12]Max. and Min. Wire Size in Conduit #6 to #14 AWGMax. Output Power 3500 W

Charger Regulation MethodThree-stage [13]Two-stage [14]

Supported Battery Types Flooded, GEL, AGM, CustomEfficiency

Max. Power Conversion Efficiency 93% (nominal 12 V), 96% (nominal 24 V), 97% (nominal 36V), 98% (nominal 48 V), 99% (nominal 60 V)

General SpecificationsPower Consumption (night time) 2.5 WBattery Temperature Sensor IncludedAuxiliary Output 5–13 V, up to 200 mAEnclosure Material Indoor, ventilated, sheet metal chassis with 2.2 and 2.8 cm

knockouts and aluminum heat sinkIP Degree of Protection IP 20Product Weight 10.8 lb. (4.8 kg)Shipping Weight 17.6 lb. (8.0 kg)Product Dimensions (H x W x D) 14.5 x 5.8 x 5.5 in. (36.8 x 14.6 x 13.8 cm)Shipping Dimensions (H x W x D) 19.0 x 9.0 x 9.8 in. (48.3 x 22.9 x 35.0 cm)Device Mounting Vertical wall-mountAmbient Air Temperature for Operation -4–113°F (-20–45°C)Storage Temperature Range -40–185°F (-40–85°C)Operating Altitude Sea level to 6562 ft. (2000 m)System Network and Remote Monitoring AvailableWarranty 5 year standardPart Number 865–1030–1FeaturesDisplay Type LCD, 2 lines,

16 digitsRegulatory Approval

Safety CSA Certified (UL1741, CSA 107.1) and CE Marked for LowVoltage Directive (EN50178)

EMC FCC and Industry Canada (Class B), CE Marked for theEMC Directive (EN61000-6-1, -6-3), C-Tick Compliant

Compatible Products

Conext XW+ interver/charger (230 V)XW 7048 E product no.

865-7048-61XW 8548 E product no.

865-8548-61Conext XW+interver/charger (120/240 V) XW 5548 NA product no. 865-5548-01

XW 6848 NA product no. 865-6848-01

Conext SW (230 V)SW 2524 product no. 865-2524-61SW 4024 product no. 865-4024-61SW 4048 product no. 865-4048-61

Conext SW (120 V)SW 2524 product no. 865-2524SW 4024 product no. 865-4024SW 4048 product no. 865-4048

Conext System Control Panel 865–1050Conext Automatic Generator Start 865–1060Conext ComBox 865–1058Conext Portable Installation and Configuration Tool 865–1155–01

[10] Specifications are subject to change without notice.[11] 48 A at STC.[12] For all battery voltages except 60 V.[13] Bulk, absorption, float, plus manual equalization.[14] Bulk, absorption, plus manual equalization.

5ADVANCEDPRODUCTS





Documents

Schneider Electric Digest 177 Section 5: Advanced Products · EVlink™ChargingSolutions 5-2 EVlink™ChargingSolutions—Overview 5-2 ... 258-9200 - [email protected] - . 5-3 schneider-electric.us