Schedule of Accreditation United Kingdom Accreditation Servicebbacerts.co.uk/download/0113Product Certification.pdf · United Kingdom Accreditation Service 21 - 47 High Street,

Assessment Manager: CM2 Page 1 of 23

Schedule of Accreditation issued by

United Kingdom Accreditation Service

21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK

0113

Accredited to ISO/IEC 17065:2012 to provide

product conformity certification

British Board of Agrément

Issue No: 020 Issue date: 27 July 2015

PO Box No 195

Bucknalls Lane

Garston

Watford

Hertfordshire

WD25 9BA

Contact: Mr John Albon

Tel: +44 (0)1923 665 300

Fax: +44 (0)1923 665301

Website: www.bbacerts.co.uk

Locations where certification activities covered by the above Accreditation Standard are undertaken

British Board of Agrément PO Box 195 Bucknalls Lane Garston Watford Herts. WD25 9BA United Kingdom

0113

Accredited to ISO/IEC

17065:2012 to provide product conformity certification


United Kingdom Accreditation Service 21 - 47 H igh St ree t , Fe l t ham, M i dd l esex, TW 13 4UN, UK

British Board of Agrement



DETAIL OF ACCREDITATION

Product Standard

Building Systems and Kits BBA Technical Specifications 001 to 0013 and BBA Document BBA 001

Ceiling Products

Concrete and Plaster Products

Heating and Ventilation Products and Systems

Finishes

Floor Products

Highway Works, Products and Systems

Jointing Products, Components and Materials

Masonry Products

Roof and Roofing Products and Systems

Drainage and Plumbing Products and Systems

Wall and Cladding Products and Systems

Window, Door and Opening Products and Systems

Environmental Profiles of Construction Products - BRE Scheme Document SD 028

0113








Product Standard

At the last review of Document BBA 001 the following standards were included within the scope of accreditation. Other standards may have since been added using the flexible scope arrangements.

Metal Anchors for use in Concrete Part 1: Anchors in General (97/177/EC)

ETAG 001

Metal Anchors for use in Concrete Part 4: Deformation-Controlled Expansion Anchors (97/177/EC)

ETAG 001

Metal Anchors for use in Concrete Part 5: Bonded Anchors (97/177/EC)

ETAG 001

Metal Anchors for use in Concrete Part 6: Anchors for Multiple use for Non-Structural Applications (97/177/EC)

ETAG 001

Structural Sealant Glazing Systems (SSGS) Part 1: Supported and Unsupported Systems (96/582/EC)

ETAG 002

Structural Sealant Glazing Systems (SSGS) Part 2: Coated Aluminium Systems (96/582/EC)

ETAG 002

Structural Sealant Glazing Systems (SSGS) Part 3: Systems incorporating Profiles with a Thermal Barrier (96/582/EC)

ETAG 002

International Partition Kits for use as Non Load-Bearing Walls (2001/596/EC)

ETAG 003

External Thermal Insulation Composite Systems with Rendering (2001/596/EC)

ETAG 004

0113








Product Standard

Liquid Applied Roof Waterproofing Kits Part 1: General (2001/596/EC)

ETAG 005

Systems of Mechanically Fastened Flexible Roof Waterproofing Membranes (98/143/EC)

ETAG 006

Timber Frame Building Kits (99/455/EC) ETAG 007

Prefabricated Stair Kits in General (excluding severe climatic conditions) (2001/596/EC)

ETAG 008

Non Load-Bearing Permanent Shuttering Kits/Systems based on Hollow Blocks or Panels of Insulating Materials and sometimes Concrete (2001/596/EC)

ETAG 009

Self Supporting Translucent Roof Kits (2001/596/EC) ETAG 010

Light Composite Wood-Based Beams and Columns (99/92/EC)

ETAG 011

Log Building Kits (99/455/EC) ETAG 012

Post-Tensioning Kits for Pre-stressing of Structures (98/456/EC)

ETAG 013

Plastic Anchors for Fixing of External Thermal Insulation Composite Systems with Rendering (97/463/EC)

ETAG 014

Three-Dimensional Nailing Plates (97/638/EC) ETAG 015

Self-Supporting Composite Lightweight Panels Part 1: General (94/23/EC)

ETAG 016

0113








Product Standard

Self-Supporting Composite Lightweight Panels Part 2: Specific Aspects Relating to Self-Supporting Composite Lightweight Panels for use in Roofs (94/23/EC)

ETAG 016

Self-Supporting Composite Lightweight Panels Part 3: Specific aspects relating to Self-Supporting Composite Lightweight Panels for use in External Walls and Claddings (94/23/EC)

ETAG 016

Self-Supporting Composite Lightweight Panels Part 4: Specific Aspects Relating to Self-Supporting Composite Light Panels for use in Internal Walls and Ceilings (94/23/EC)

ETAG 016

Veture Kits - Prefabricated Units for External Wall Insulation (2001/308/EC)

ETAG 017

Fire Protective Products Part 1: General (2001/596/EC)

ETAG 018

Fire Protective Products Part 2: Reactive Coatings for Fire Protection of Steel Elements

ETAG 018

Fire Protective Products Part 3: Renderings and Rendering Kits for Fire Resisting Applications

ETAG 018

Fire Protective Products Part 4: Fire Protective Board, Slab and Mat Products and Kits

ETAG 018

Pre-Fabricated Wood-Based Load-Bearing Stressed Skin Panels (94/23/EC)

ETAG 019

Cold Storage Premises Kits Part 1: Cold Storage Room Kits (2005/484/EC)

ETAG 021

0113








Product Standard

Thermal Insulation Products for Buildings - Factory Made Mineral Wool (MW) Products. Specification

BS EN 13162:2008

Thermal Insulation Products for Buildings - Factory Made Products of Expanded Polystyrene. Specification

BS EN 13163:2008

Thermal Insulation Products for Buildings - Factory Made Products of Extruded Polystyrene Foam (XPS). Specification

BS EN 13164:2008

Thermal Insulation Products for Buildings - Factory Made Rigid Polyurethane Foam (PUR) Products. Specification

BS EN 13165:2001

Thermal Insulation Products for Buildings - Factory Made Products of Phenolic Foam (PF). Specification

BS EN 13166:2001

Thermal Insulation Products for Buildings - Factory Made Cellular Glass (CG) Products. Specification

BS EN 13167:2008

Thermal Insulation Products for Buildings - Factory Made Wood Wool (WW) Products. Specification

BS EN 13168:2001

Thermal Insulation Products for Buildings - Factory Made Products of Expanded Perlite (EPB). Specification

BS EN 13169:2008

Thermal Insulation Products for Buildings - Factory Made Wood Fibre (WF) Products. Specification

BS EN 13171:2001

Wood-Based Panels for use in Construction. Characteristics, Evaluation of Conformity and Marking

BS EN 13986:2004

Timber Structures. Structural Laminated Veneer Lumber. Requirements

BS EN 14374

Timber Structures - Connectors - Requirements prEN 14545

0113








Product Standard

Timber Structures. Dowel-type fasteners. Requirements

BS EN 14592:2008

Admixtures for Concrete, Mortar and Grout. Concrete Admixtures. Definitions, Requirements, Conformity, Marking and Labelling

BS EN 934-2

Specification for Masonry Units. Autoclaved Aerated Concrete Masonry Units

BS EN 771-4

Specification for Mortar for Masonry. Masonry mortar BS EN 998-2

Thermal insulation products for buildings - In situ formed loose-fill mineral wool (MW) Part 1: Specification for the loose fill products before installation

BS EN 14064-1

Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics

BS EN 14351-1

Flexible sheets for waterproofing – Bitumen damp proof sheets including bitumen basement tanking sheets – Definitions and characteristics

BS EN 13969:2004

0113








Product Standard

The certification systems used for the above are one or more of the following:

Type testing or examination

Product evaluation

Design appraisal These can be coupled with assessment and surveillance of production, the supplier’s quality system and/or installation sites. Where appropriate a:

European Technical Approval, or

Certificate or Statement of Conformity, or

BBA Agrément Certificate

Certificate of factory production control Will be issued to the supplier along with (if relevant) a license to use the appropriate mark of conformity.

Micro-generation Product Certification Solar Collectors Solar Photovoltaic Panels Micro and Small Wind Turbines Heat Pumps Biomass Heat-led Micro - Co Generation Packages Electricity Led Micro Co-Generation Packages Bespoke Building Integrated Photovoltaic Products Pitched Roof Installation Kits

DECC Scheme Requirements MCS 004 - Solar Collectors MCS 005 - Solar Photovoltaic Panels MCS 006 - Micro and small wind turbines MCS 007 - Heat Pumps MCS 008 - Biomass MCS 014 - Micro CHP MCS 015 – Electricity Led Micro Co-Generation Packages MCS 017-Bespoke Building Integrated Photovoltaic Products MCS 012-Pitched Roof Installation Kits MCS 010 (Generic Factory Production Control) MCS 011 (Testing and acceptance criteria)

0113








Product Standard

Installation of following Green Deal measures: Cavity Wall Insulation Loft Insulation Pitched Roof Insulation Flat Roof Insulation Internal Wall Insulation External Wall Insulation Hybrid Wall Insulation Draught Proofing Floor Insulation Energy Efficient Glazing and Doors

PAS 2030:2014 Improving the energy efficiency of existing buildings Specification for installation process, process management and service provision. Edition 1 – January 2014 PAS 2031:2012 Certification of Energy Efficiency Measure (EEM) installation services Edition 1 – March 2012

Installation of insulating material to the internal walls of a building, not including the installation of flexible thermal linings Installation of insulating material to the external walls of a building, not including the insulation of demountable-clad buildings Installation of insulating material to the external and internal walls of a building (“hybrid insulation”), not including the insulation of demountable-clad buildings, and not including the installation of flexible thermal linings

DCLG Conditions of Authorisation 6 June 2012 And The Competent Person Scheme ‘BBA Solid Wall Insulation Competent Person Scheme’ in accordance with the Building Regulations 2010 (as amended)

END

0113








Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of ISO 17025

Directive/Regulation Confority Assessment procedure/Module/Article

Category of products or individual products

Essential requirements:Product specification/ Properties/Standards

The Construction Products Regulation (EU) No 305/2011

Annex V- FPC Certification Body (AVCP) System 2+

97/555/EC Cements, building limes and other hydraulic binders : - Common cements, including: -Portland cement, -Portland composite cements: Portland-slag cement, Portland-silica fume cement, Portland-pozzolana cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blastfurnace cements, -Pozzolanic cements, -Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products)

EN 197-1:2000 EN 197-1:2000/ A1:2004 EN 197-1:2000/A3:2007 EN 197-1:2011


Annex V- Product Certification Body (AVCP) System 1

97/555/EC Cements, building limes and other hydraulic binders : - Building limes, including: -Calcium limes, -Dolomitic limes, -Hydraulic limes (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

EN 459-1:2010



97/740/EC Masonry and related products (1/3) : - Masonry units category I

EN 771-4:2011

0113













Annex V- Testing Laboratory (AVCP) System 3

97/740/EC Masonry and related products (2/3) : - Ties (in walls and partitions), Tension straps (in walls and partitions), Joist hangers (in walls and partitions), Brackets (in walls and partitions).

EN 845-1:2003+A1:2008



97/740/EC Masonry and related products (2/3) : - Lintels (in walls and partitions).

EN 845-2:2003


99/469/EC Products related to concrete, mortar and grout (1/2) : - Admixtures (for concrete, mortar and grout).

EN 934-2:2009


97/740/EC Masonry and related products (1/3) : - Factory-made,designed masonry mortars (in walls, columns and partitions).

EN 998-2:2010

0113












The Construction Products Regulation (EU) No 305/2011 (cont’d)


98/214/EC Structural metallic products and ancillaries (2/4) : - Structural metallic construction members: finished metallic products such as trusses, girders, columns, stairs, ground piles, bearing piles and sheet piling, cut to size sections designed for certain applications, and rails and sleepers. They can be unprotected or protected against corrosion by coating, welded or not. (for uses in work's frames and foundations)

EN 1090-1:2009 EN 1090-1:2009+A1:2011 EN 1090-1:2009/AC:2010

Annex V- FPC 99/469/EC EN 1504-2:2004

Certification Body (AVCP) System 2+

Products related to concrete, mortar and grout (1/2) : - Concrete protection and repair products

EN 1504-3:2005 EN 1504-4:2004 EN 1504-5:2004 EN 1504-6:2006 EN 1504-7:2006

Annex V- FPC 98/601/EC EN 12271:2006


Road construction products (1/2) : - Surface treatments (for surface treatments of roads).

EN 12273:2008

0113














98/601/EC Road construction products (1/2) : - Bituminous mixtures (for road construction and surface treatment of roads).

EN 13108-1:2006 EN 13108-1:2006/AC:2008 EN 13108-2:2006 EN 13108-2:2006/AC:2008 EN 13108-3:2006 EN 13108-3:2006/AC:2008 EN 13108-4:2006 EN 13108-4:2006/AC:2008 EN 13108-5:2006 EN 13108-5:2006/AC:2008 EN 13108-6:2006 EN 13108-6:2006/AC:2008 EN 13108-7:2006 EN 13108-7:2006/AC:2008

Annex V- Testing 99/91/EC EN 13162:2008

Laboratory (AVCP) System 3

Thermal insulating products (1/2) : - Thermal insulating products

EN 13163:2008 EN 13164:2008 EN 13165:2008 EN 13166:2008 EN 13167:2008 EN 13168:2008 EN 13169:2008 EN 13170:2008 EN 13171:2008 EN 14064-1:2010

Annex V- Product Certification Body (AVCP) System 1 and Annex V- Testing Laboratory (AVCP) System 3

99/91/EC Thermal insulating products (2/2) : - Thermal insulating products

EN 13162:2008 EN 13163:2008 EN 13164:2008 EN 13165:2008 EN 13166:2008 EN 13167:2008 EN 13168:2008 EN 13169:2008 EN 13170:2008 EN 13171:2008 EN 14064-1:2010

0113














99/90/EC Membranes (1/3) : - Roof sheets (in buildings).

EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006


99/90/EC Membranes (2/3) : - Roof sheets (for uses subject to reaction to fire regulations).

EN 13707:2004+A2:2009 EN 13956:2005 EN 13956:2005/AC:2006


98/601/EC Road construction products (1/2) : - Bitumen (for road construction and surface treatment of roads).

EN 13808:2005 EN 14023:2010

Annex V- FPC 99/90/EC EN 13967:2004


Membranes (1/3) : - Damp proofing sheets (in buildings).

EN 13967:2004/A1:2006 EN 13969:2004 EN 13969:2004/A1:2006

Annex V- Product Certification Body (AVCP) System 1 and Annex V- FPC Certification Body (AVCP) System 2+

97/462/EC Wood-based panels (1/2) : - Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external applications).

EN 13986:2004


97/462/EC Wood-based panels (2/2) : - Unfaced, overlaid and veneered or coated wood-based panels (for non structural elements in internal or external applications).

EN 13986:2004

0113














98/436/EC Roof coverings, rooflights, roof windows and ancillary products (6/6)

EN 14351-1:2006+A1:2010


99/93/EC Doors, windows, shutters, blinds, gates and related building hardware (1/1) :

EN 14351-1:2006+A1:2010


97/176/EC Structural timber products (1/3) and (2/3)

EN 14374:2004

Annex V- FPC


97/638/EC Fasteners for structural timber products (1/1

EN 14545:2008 ETAG 015

Annex V- FPC


98/601/EC Road construction products (1/2) : - Bridge deck waterproofing products and kits (for bridge decks).

EN 14695:2010

Annex V- Testing

Laboratory (AVCP) System 3

97/176/EC Structural timber products (3/3) : - Fasteners for structural timber products

EN 14592:2008

0113














99/469/EC Products related to concrete, mortar and grout (1/2) : - Fibres (for structural uses in concrete, mortar and grout)

EN 14889-1:2006 EN 14889-2:2006


99/94/EC Precast normal/ lightweight/ autoclaved aerated concrete products (1/1) : - Precast normal/ lightweight/ autoclaved aerated concrete products (for structural use).

EN 15037-4:2010

Annex V- Product Certification Body (AVCP) System 1+

99/469/EC Products related to concrete, mortar and grout (1/2) : - Additions (Type II) (for concrete, mortar and grout).

EN 15167-1:2006

Annex V- Product 96/582/EC ETAG 001 - 1

Certification Body (AVCP) System 1

Metal anchors for use in concrete (mechanical fasteners) : - Metal anchors for use in concrete (heavy-duty type) (for fixing and/or supporting concrete structural elements or heavy units such as cladding and suspended ceilings).

ETAG 001 - 2 ETAG 001 - 3 ETAG 001 – 3 Amendment ETAG 001 - 4 ETAG 001 - 5 ETAG 001 - 6 ETAG 001 – 6 Amendment

Annex V- Product


97/177/EC Metal injection anchors for use in masonry (1/1) : - Metal injection anchors for use in masonry

ETAG 001 - 5

0113














97/463/EC Plastic anchors for use in concrete and masonry (1/1)

ETAG 001 - 6 ETAG 001 – 6 Amendment ETAG 014


96/582/EC Structural sealant glazing kits of types (curtain walling) : - Structural sealant glazing kits, Types II and IV (for external walls and roofs).

ETAG 002 - 1 ETAG 002 - 2 ETAG 002 - 3


96/582/EC Structural sealant glazing kits of types (curtain walling) : - Structural sealant glazing kits, Types I and III (for external walls and roofs).

ETAG 002 - 1 ETAG 002 - 2 ETAG 002 - 3


98/213/EC Internal partition kits (1/5)

ETAG 003


97/556/EC External thermal insulation composite systems/kits with rendering (ETICS)(1/1) : -

ETAG 004 Version 08/2011

0113














98/279/EC Non load bearing permanent shutterings: kits/systems based on hollow blocks or panels of insulating materials and, sometimes, concrete (1/1)

ETAG 004 Version 08/2011 ETAG 009

Annex V- Product


98/599/EC Liquid applied roof waterproofing kits (3/3) : - Liquid applied roof waterproofing kits (for uses subject to reaction to fire regulations)

ETAG 005

Annex V- FPC


98/143/EC Systems of mechanically fastened flexible roof waterproofing membranes (1/1)

ETAG 006

Annex V- Product


99/455/EC Timber frame and log prefabricated building kits (1/1)

ETAG 007 ETAG 012

Annex V- FPC


99/89/EC Prefabricated stair kits (1/2)

ETAG 008

Annex V- Product


99/89/EC Prefabricated stair kits (2/2)

ETAG 008

0113














98/600/EC Self-supporting translucent roof kits (except glass-based kits) (3/3)

ETAG 010


99/92/EC Light composite wood-based beams and columns (1/1)

ETAG 011

Annex V- Product Certification Body (AVCP) System 1+

98/456/EC Post-tensioning kits for the prestressing of structures (1/1)

ETAG 013


2000/447/EC Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (3/6)

ETAG 016 - 1 ETAG 016 - 2 ETAG 016 - 3 ETAG 016 - 4

Annex V- Product


99/454/EC Fire stopping, fire sealing and fire protection products (1/2) and (2/2)

ETAG 018 - 1 ETAG 018 - 4 ETAG 018 - 4 Amendment

Annex V- Product


2000/447/EC Prefabricated wood-based load-bearing stressed skin panels and self-supporting composite lightweight panels (1/6) and (3/6)

ETAG 019

0113













Annex V- FPC Certification Body (AVCP) System 1 and Annex V- FPC Certification Body (AVCP) System 2+& 2+

2003/655/EC Watertight coverings kits for wetroom floors and walls (1/2

ETAG 022 - 1 ETAG 022 - 2 ETAG 022 - 3

Annex V- FPC Certification Body (AVCP) System 1 & 2+

2003/655/EC Watertight coverings kits for wetroom floors and walls (2/2)

ETAG 022 - 1 ETAG 022 - 2 ETAG 022 - 3


2003/722/EC Liquid-applied bridge deck waterproofing kits : - Liquid-applied bridge deck waterproofing kits (in bridge decks).

ETAG 033


2003/728/EC Metal frame building kits, concrete frame building kits, prefabricated building units, cold storage room kits and rock-fall protection kits : - Prefabricated building units (in building works).

ETAG 023

0113













As a Technical Assessment Body (TAB) for developing European Assessment Documents

Annex IV –Product Areas 1. Precast normal / lightweight / autoclaved aerated concrete products. 2. Doors, windows, shutters, gates and related building hardware.

3. Membranes, including

liquid applied and kits (for water and/or water vapour control)

4. Thermal insulation

products. composite insulating kits / systems.

6. Chimneys, flues and

specific products 7. Gypsum products 8. Geotextiles,

geomembranes, and related products.

9. Curtain walling / cladding /

structural sealant glazing. 12. Circulation fixtures: road

equipment 13. Structural timber products

/ elements and ancillaries. 14. Wood based panels and

elements 15. Cement, building limes

and other hydraulic binders.

0113













As a Technical Assessment Body (TAB) for developing European Assessment Documents (cont’d)

Annex IV –Product Areas (cont’d)

16. Reinforcing and prestressing steel for concrete (and ancillaries). post tensioning kits 17. Masonry and related products. masonry units, mortars, and ancillaries.

18. Waste water engineering

products 19. Floorings. 20. Structural metallic

products and ancillaries. 21. Internal & external wall

and ceiling finishes.Internal partition kits

22. Roof coverings, roof

lights, roof windows, and ancillary products. roof kits

23. Road construction

products. 24. Aggregates 25. Construction adhesives 26. Products related to

concrete, mortar and grout. 27. Space heating appliances 28. Pipes-tanks and

ancillaries not in contact with water intended for human consumption

0113













As a Technical Assessment Body (TAB) for developing European Assessment Documents (cont’d)

Annex IV –Product Areas (cont’d)

29. Construction products in contact with water intended for human consumption 30. Flat glass, profiled glass and glass block products 32. Sealants for joints

33. Fixings 34.Building kits, units, and

prefabricated elements.

END