Sccm 2012 Rc Part 17 - Using Mdt 2012

http://www.windows-noob.com/forums/index.php?/topic/4045-system-center-2012-configuration-manager-guides/


SCCM 2012 RC Part 17

Using MDT 2012 RC1 with Configuration Manager 2012

Author: Niall C. Brady

Editor: Brian Thorp

In Part 1 of this series we got our AD and SCCM servers ready, and then we installed System Center

2012 Configuration Manager as a standalone Primary site. In Part 2 we configured the SCCM server

further by adding some Windows Server roles necessary for the following Configuration Manager 2012

functionality, Software Update Point (SUP) and Operating System Deployment. In Part 3 we

configured the server further by Enabling Discovery methods and creating Boundary's and Boundary

Groups. In Part 4 we configured Client Settings, Added roles and Distributed the Configmgr Client to

our Computers within the LAB, then in Part 5 we enabled the Endpoint Protection Role and

configured Endpoint Protection settings and targeted a collection called All Windows 7

Computers with these settings and policies.

In Part 6 we configured our SUP further to Deploy software updates to our All Windows 7

Computers and Build Windows 7 X64 collections. In Part 7 we used the Build and Capture process to

create our Base Windows 7 X64 wim image. In Part 8 we created a USMT 4 package to migrate the users

data using hardlinking and then we imported the captured image into ConfigMgr and created a Deploy

Windows 7 X64 task sequence. We created a Deploy Windows 7 X64 Collection and set some User

Device Affinity collection variables.

In Part 9 we created an Application, and created a deployment type for that application to only install if

the Primary User was True for that device (User Device Affinity), we then copied our Task Sequence

(duplicated it), deployed the new Task Sequence, added a computer to the new collection and then PXE

booted the computer to the Deployment Menu. In Part 10 we monitored the Deployment process in a lot

of detail to how UDA sent state messages and we verified that our application installed on the users

Primary Device, in addition we modified our collection variables, and added a prestart command to our

boot image to prompt for the SMSTSUdaUsers. In Part 11 we setup the Reporting Services Point

Role and verified that reporting was working.

In Part 12 we demonstrated a new feature in ConfigMgr which allows us to Patch operating system WIM

images using Offline Servicing. This means that you can apply Windows Updates by

using Component-Based Servicing (CBS) to update the your previously captured WIM images. In Part

13 we looked at how Role Based Administration is used within ConfigMgr and we created a new

custom role to allow a user (or users within a Security Group) to view Software Update Reports. This is

useful because you will probably want one team to take care of configuring and deploying software

updates, and to grant another (Management etc) the capability of reviewing Compliance Reports. In Part

14 we performed a side-by-side migration from Configuration Manager 2007.

In Part 15, we deployed Windows 8 Consumer Preview to see if it was possible, and indeed it was (it's

not supported by Microsoft however). In Part 16 we integrated MDT 2012 RC1 with Configuration

Manager 2012 RC2 and now we will configure it to see what it can do with that integration by using

the UDI Wizard designer to configure the default Custom XML file used in a UDI task sequence

namely UDIWizard_Config.xml.

http://www.windows-noob.com/forums/index.php?/topic/4422-using-sccm-2012-rc-in-a-lab-part-1-installation/

http://www.windows-noob.com/forums/index.php?/topic/4427-using-sccm-2012-rc-in-a-lab-part-2-add-sup-and-wds/

http://www.windows-noob.com/forums/index.php?/topic/4428-using-sccm-2012-rc-in-a-lab-part-3-configuring-discovery-and-boundaries/

http://www.windows-noob.com/forums/index.php?/topic/4429-using-sccm-2012-rc-in-a-lab-part-4-configuring-client-settings-and-adding-roles/

http://www.windows-noob.com/forums/index.php?/topic/4466-using-sccm-2012-rc-in-a-lab-part-5-enable-the-endpoint-protection-role-and-configure-endpoint-protection-settings/

http://www.windows-noob.com/forums/index.php?/topic/4467-using-sccm-2012-rc-in-a-lab-part-6-deploying-software-updates/

http://www.windows-noob.com/forums/index.php?/topic/4468-using-sccm-2012-rc-in-a-lab-part-7-build-and-capture-windows-7-x64/

http://www.windows-noob.com/forums/index.php?/topic/4512-using-sccm-2012-rc-in-a-lab-part-8-deploying-windows-7-x64

http://www.windows-noob.com/forums/index.php?/topic/4514-using-sccm-2012-rc-in-a-lab-part-9-adding-an-application-editing-a-deployment-type-copying-the-deploy-task-sequence/

http://www.windows-noob.com/forums/index.php?/topic/4522-using-sccm-2012-rc-in-a-lab-part-10-using-prestart-and-extrafiles-to-get-more-out-of-uda/

http://www.windows-noob.com/forums/index.php?/topic/4550-using-sccm-2012-rc-in-a-lab-part-11-adding-the-reporting-services-point-role/

http://www.windows-noob.com/forums/index.php?/topic/4683-using-sccm-2012-rc-in-a-lab-part-12-updating-an-operating-system-image-using-offline-servicing/

http://www.windows-noob.com/forums/index.php?/topic/4925-using-sccm-2012-rc-in-a-lab-part-13-using-role-based-administration-to-define-permissions-in-the-configmgr-console/http://www.windows-noob.com/forums/index.php?/topic/4925-using-sccm-2012-rc-in-a-lab-part-13-using-role-based-administration-to-define-permissions-in-the-configmgr-console/

http://www.windows-noob.com/forums/index.php?/topic/4925-using-sccm-2012-rc-in-a-lab-part-13-using-role-based-administration-to-define-permissions-in-the-configmgr-console/http://www.windows-noob.com/forums/index.php?/topic/4925-using-sccm-2012-rc-in-a-lab-part-13-using-role-based-administration-to-define-permissions-in-the-configmgr-console/

http://www.windows-noob.com/forums/index.php?/topic/4926-using-sccm-2012-rc-in-a-lab-part-14-performing-a-side-by-side-migration-from-configuration-manager-2007/

http://www.windows-noob.com/forums/index.php?/topic/4926-using-sccm-2012-rc-in-a-lab-part-14-performing-a-side-by-side-migration-from-configuration-manager-2007/

http://www.windows-noob.com/forums/index.php?/topic/5124-using-sccm-2012-rc-in-a-lab-part-15-deploying-windows-8-consumer-preview-using-configuration-manager-2012-rc2

http://www.windows-noob.com/forums/index.php?/topic/5131-using-sccm-2012-rc-in-a-lab-part-16-integrating-mdt-2012-rc1-with-configuration-manager-2012/



Step 1. make the MDT boot image PXE bootable

Note: Perform the following on the ConfigMgr 2012 server as SMSadmin

After integrating MDT with ConfigMgr we created a MDT Task Sequence and as part of that wizard we

created a MDT Boot image. This boot image gives us additional power and functionality over a standard

ConfigMgr boot image (for example, we can display HTA's with this boot image without having to

mount/unmount the boot.wim file and add additional support).

Locate your MDT boot image in Software Library, Operating Systems, Boot Images, right click on it and

choose Properties



When the properties screen appears, click on the Data Source tab, place a check-mark in Deploy this

boot image from the PXE service point.

click OK when done.



Step 2. Modify the UDIWizard_Config xml file using the UDI Designer

Wizard


As we will be creating a User Driven Installation Task Sequence in the next part, we first want

to customize what our users will see when that wizard appears and to do so we need to use the UDI

Designer Wizard. So click on Start, Programs, Microsoft Deployment Toolkit, and select the UDI

Wizard Designer from the menu.

The UDI Wizard Designer starts and you'll be presented with the new gui, we can use this gui to make

changes to the built in UDI templates, they are simply XML files stored in the scripts folder of our MDT

Files package.



We could click on New to create a new XML file but let's import that one that the standard UDI Task

Sequence uses namely UDIWizard_Config.xml. So let's load up that file from the copy we have in our

MDT Files package, if you remember in Part 16 we created that package

in \\sccm\sources\os\mdt\2012_rc1\files so let's click on Open in the UDI Wizard ribbon to browse to

that location.

type in the path to our MDT Files package namely \\sccm\sources\os\mdt\2012_rc1\files and click on

the Scripts folder highlighted in the screenshot below

a long list of xml files appears, scroll down to UDIWizard_Config.xml and click on it then click on open



Once the xml file is loaded you'll notice the wizard changes look, this is an overview of each page that the

User Driven Installation task sequence wizard is capable of showing and here is where we configure

them. But first, how do we make sense of this GUI, I’ll try and explain it briefly, in the Red box below you

have the three main scenarios that we'll encounter during deployments sorted into Stage Groups



New Computer

Refresh

Replace If you expand New Computer you'll see a whole bunch of thumbnails for that Stage Group (and you'll

also see New Computer. Pre-staged below it), those thumbnails are what the User will see when the

wizard kicks off later... note that depending on the scenario you are in, you'll be presented with different

pages of the wizard.



In the Left pane of the wizard you'll see the available pages listed alphabetically in the page library (not in

the same order as they are presented to the end-user). Double click on one and you'll see the

configurable options for that page (you can single click and you might see those options depending on

whether or not you are in Flow or Configure mode, that's those two tabs in the right pane...)

Click on Install Programs in the Left Pane, the number 3 in the right is the number of stages this Page is

available in (you can hover your mouse over it to see what they are).



Notice there is a Configuration Manager Button in the ribbon, click on it.

This brings up the Site Settings box, fill in your Configuration Manager site server name and site code

and click on Validate Site.



Note: The message states that this is required to add software items. To make application(s) available on the software page, applications must be targetted at the provided collection namely All Systems. The All Systems collection is a Device collection (for your computers..) so please deploy a few applications to that collection.

Double click on Install Programs or click on the Configure tab

Next, click on General Software in order to see a menu we need (you can also right click on General

Software to see a menu)



Now that we have these extra options let's click on the big blue plus sign to add software to group

the Add Software to Group wizard appears, select I want to add an application and click next



Now the Software Selection Wizard appears (another wizard within a wizard), click on Select to search

for an application (why not call it search..?)

and that brings up another wizard to search applications.. if you know the name of your application type

it in here or click on search, after clicking on search, any applications deployed to theAll

Systems collection and with the Allow this application to be installed from the Install Application

task sequence action instead of deploying it manually setting set in the applications properties will

appear in the list.



The application setting is here...

select one application from the list and click on Finish



You're newly added application appears in the list

repeat the above process until you've added all your cool apps...

and finally right click on the Sample Application from the list and click on Remove Item



Next, Click on the Language Page in the left pane and add the Swedish Language (or whatever

language(s) you want)

and finally configure our Wizard config by clicking on Wizard Config in the ribbon. The Edit Wizard

settings dialogue box appears, you can customize the name and the background (banner), the default

bmp file itself is located in the path where you installed Microsoft Deployment Toolkit in the:

\Templates\Distribution\Tools\X64 or X86 folders.



Make your changes and click ok.

Ok now that we've done some basic configuration of our UDI template let's save it.

If all went well you'll see File Save Complete.



You can verify that the XML file itself has changed by it's date/time



Step 3. Update your MDT Files package


now that you've made changes to your UDIWizard_Config.xml you will want to update the MDT Files

package so that we have access to those changes in the next part of this series where we'll create and

deploy a User Driven Installation Task Sequence.

In Software Library click on Packages and locate your MDT Files package. Right click on it and

choose Update Distribution Points

That’s it for this part, see you next time when we will create a UDI task sequence and deploy it ! and see

what happens on the client side.

Documents

Sccm 2012 Rc Part 17 - Using Mdt 2012