ScanMaster Body …3dprintingsystems.com/download/ScanMaster Body for Astra.pdfBody Manual Body 3D Scanner. The ScanMaster AU: ... 4 Download ... The screen and camera must each be

www.3dprintingsystems.com

ScanMaster

Dear Scan Master Operator,

We're excited you've chosen the new ScanMaster

Scanner will allow you to capture the world around you.

We can't wait to see what you capture.

Happy scanning,

3D Printing Systems

ScanMaster Body Manual

We're excited you've chosen the new ScanMaster Body 3D Scanner. The ScanMaster

Scanner will allow you to capture the world around you.

to see what you capture.

AU: 03 9099 0225

NZ: 09 281 4206

1 | P a g e

3D Scanner. The ScanMaster Body 3D


Contents 1 Hardware Requirements ................................

2 Quick Start Guide ................................

3 Update Graphics card drivers to latest version

3.1 Nvidia ................................

4 Download ................................

4.1 Software & Driver Pack

5 Display Screen Software ................................

5.1 Install the Windows 64bit versions in the numbered order 1,2,3&4.

6 Restart Computer ................................

7 Connect USB Cables ................................

8 Setup ................................................................

8.1 Windows ................................

8.1.1 Configure multiple displays

8.1.2 Map touch screen

8.2 Multiple graphics cards

8.3 Disable taskbar on all displays

8.3.1 Windows 8 only. ................................

9 Check your setup................................

9.1 License ................................

9.2 Windows ................................

10 Scanning ................................

10.1.1 Scene ................................

10.1.2 Bounding box ................................

11 Trouble shooting ................................

................................................................................................

................................................................................................

Update Graphics card drivers to latest version ................................................................

................................................................................................................................

................................................................................................................................

Software & Driver Pack ................................................................................................

................................................................................................

Install the Windows 64bit versions in the numbered order 1,2,3&4. ................................

................................................................................................

................................................................................................

................................................................................................

................................................................................................................................

Configure multiple displays ................................................................

Map touch screen ................................................................................................

Multiple graphics cards ................................................................................................

Disable taskbar on all displays ................................................................................................

................................................................................................

................................................................................................

................................................................................................................................

................................................................................................................................

................................................................................................................................

................................................................................................

................................................................................................

................................................................................................

AU: 03 9099 0225

NZ: 09 281 4206

2 | P a g e

................................................. 3

............................................................ 3

.............................................. 4

...................................... 4

........................................ 4

........................................... 4

................................................. 4

.................................... 4

............................................................ 4

........................................................ 4

............................................... 5

................................. 5

............................................................. 5

........................................... 6

........................................... 7

................................ 8

.............................................. 8

............................................................. 8

..................................... 9

................................. 9

.......................................... 9

............................................................. 10

................................................ 10

........................................................... 10


1 Hardware Requirements

• Recording only: Intel Centrino or higher.

• CPU Reconstruction: 4 GB RAM, Quad core processor.

• GPU Reconstruction: 2 GB RAM,

• Windows 7 (64 bits) or higher

• Update Graphics Card D

2 Quick Start Guide

Once you have got the ScanMaster set up as detailed in this manual, do the following:

• Select size of the volume you want to scan and click start

• Position the object to be scanned in the volume on the Scanmaster

• Click the Start button

• Move around the object

• Stop the scan

• Go to 'Process' tab

Hardware Requirements

tel Centrino or higher.

GB RAM, Quad core processor.

GPU Reconstruction: 2 GB RAM, , NVidia GTX 560 or higher.

or higher, Intel i5, 4 GB RAM.

Drivers to latest version!


Select size of the volume you want to scan and click start

Position the object to be scanned in the volume on the Scanmaster

ove around the object

AU: 03 9099 0225

NZ: 09 281 4206

3 | P a g e



3 Update Graphics card

3.1 Nvidia

www.nvidia.com/Download/

4 Download

4.1 Software & Driver Pack

Download and unzip from the link below.

http://3dprintingsystems.com/download/ScanMaster%20Body%20

5 Software

5.1 Install the Windows 64bit versions in the number

6 Restart Computer

7 Connect USB CablesThe screen and camera must each be connected directly to the computer.

same USB ports each time you connect the scanner.

ard drivers to latest version

Software & Driver Pack

from the link below.

http://3dprintingsystems.com/download/ScanMaster%20Body%20-%20Astra.zip

Install the Windows 64bit versions in the numbered order 1,2,3&4.

ables The screen and camera must each be connected directly to the computer. We recommend using the

same USB ports each time you connect the scanner.

AU: 03 9099 0225

NZ: 09 281 4206

4 | P a g e

%20Astra.zip

ed order 1,2,3&4.

We recommend using the


8 Setup

8.1 Windows

8.1.1 Configure multiple displays

8.1.1.1 Right click on the Desktop and select screen resolution

Configure multiple displays

he Desktop and select screen resolution

AU: 03 9099 0225

NZ: 09 281 4206

5 | P a g e


8.1.1.2 Extend desktop

Make sure to select Multiple displays: Extend desktop

8.1.2 Map touch screen

8.1.2.1 Open eGalaxTouch from the system tray

Multiple displays: Extend desktop to this display for the scanner screen.

Open eGalaxTouch from the system tray

AU: 03 9099 0225

NZ: 09 281 4206

6 | P a g e

canner screen.


8.1.2.2 Select Monitor mapping

8.1.2.3 Monitor selection

Wait for the ' Please touch here' screen to show on the

rectangle

8.2 Multiple graphics cards

Some laptops come with both an Intel graphics card and a high end graphics card like Nvid

Geforce. Make sure that the application is using the high

Tip: Look in your Nvidia control panel to select the high end graphics card for

Select Monitor mapping

Please touch here' screen to show on the scanner monitor, then press inside the green

Multiple graphics cards

with both an Intel graphics card and a high end graphics card like Nvid

Geforce. Make sure that the application is using the high-end graphics card.

a control panel to select the high end graphics card for Rec

AU: 03 9099 0225

NZ: 09 281 4206

7 | P a g e

, then press inside the green

with both an Intel graphics card and a high end graphics card like Nvidia

constructMe.


8.3 Disable taskbar on all displays

8.3.1 Windows 8 only.

8.3.1.1 Right click on your task bar

8.3.1.2 Select 'Properties'

8.3.1.3 Uncheck Show taskbar on all displays

9 Check your setup a.) Check in Windows Device Manager that the Orbbec Astra Sensor has been detected. If not, check

if the drivers were installed correctly?

b.) Start ReconstructMe and let's

7" external monitor. Select "Orb

on all displays

Right click on your task bar

Uncheck Show taskbar on all displays

a.) Check in Windows Device Manager that the Orbbec Astra Sensor has been detected. If not, check

re installed correctly?

let's just test that the sensor is working on your computer

bbec Astra"

AU: 03 9099 0225

NZ: 09 281 4206

8 | P a g e

a.) Check in Windows Device Manager that the Orbbec Astra Sensor has been detected. If not, check

just test that the sensor is working on your computer without your


c.) For best scanning, it is highly

ReconstructMe check under "De

d.) Click Start and try scanning. N

will not be able to capture detail

9.1 License

The license is for non-commercial

9.2 Windows

Press the Windows Key and the left or right arrow key to move the

onto the external screen. � + →

10 Scanning Depending on the object being scanned, diffe

at scanning a person.

recommended to use your Graphic Card to do th

evice" and "Device Selection"

Note. If the camera is too close or too far away fr

l. You can also capture colour if you turn it on.

commercial use.

Press the Windows Key and the left or right arrow key to move the ReconstructM

→

Depending on the object being scanned, different settings will be required. In this example we look

AU: 03 9099 0225

NZ: 09 281 4206

9 | P a g e

he heavy lifting. In

rom the objects it

Me software window

rent settings will be required. In this example we look


10.1.1 Scene

Change the volume to be scanned

10.1.2 Bounding box

This is the size of the volume to be scanned. For scanning a person, we recommend starting a

MeshMixer is excellent software

11 Trouble shooting

Email: [email protected]

volume to be scanned to match the size of the object.

This is the size of the volume to be scanned. For scanning a person, we recommend starting a

e to clean, repair your scan files.

Email: [email protected]

AU: 03 9099 0225

NZ: 09 281 4206

10 | P a g e

This is the size of the volume to be scanned. For scanning a person, we recommend starting at 1.2m3

Documents

ScanMaster Body …3dprintingsystems.com/download/ScanMaster Body for Astra.pdfBody Manual Body 3D Scanner. The ScanMaster AU: ... 4 Download ... The screen and camera must each be