SCANIA ACCESSORIES...2 Scania Vehicle Accessories Scania Vehicle Accessories 3 No one is prouder of their new Scania than you, so why not add that little extra stamp of personalisation

1Scania Vehicle Accessories

SCANIA ACCESSORIES

Version 20.1

Scania Vehicle Accessories2 3Scania Vehicle Accessories

No one is prouder of their new Scania than you, so

why not add that little extra stamp of personalisation

using the broad range of Scania Accessories. Across

Europe, Scania customers love to add a personal

touch to their vehicles and we think it is time

Australian customers followed suit. So, we are making

a huge collection of Scania Accessories available to

you, from sheepskin seat covers (Australian-sourced,

naturally), a built-in microwave or electric kettle on

the inside, to a selection of light bars with super bright

LED spot and driving lamps for the front and back of

the truck, not to mention shiny hub and wheel caps.

These are all Genuine Scania products, designed

by Scania and made for Scania, and all can be

fitted by your local dealer. Scania Accessories add

convenience, comfort, peace-of-mind and that final

touch that says “IT’S MINE”!

Safety & Security 4

Bull Bars 8

Styling 12

Exterior 18

Mudflaps 22

Light Bars 26

Spotlights 28

Seat Covers 30

Conveniences 32

Storage 36

Carpet Mats 38

CONTENTS

MAKE IT YOURS

5Scania Vehicle AccessoriesScania Vehicle Accessories4

safety & security

On the move for safer ridesRegardless of weather or road condition, your truck must present flawless performance every hour you spend with it. Explore our range of safety accessories and other equipment that makes your Scania truck safer than ever. In addition, the extended range of lighting accessories enhances safety by providing several opportunities for improved visibility, ensuring that both you and others on the road are presented in the best light.

LED Worklight

Scania branded LED worklamp, 6 LED’s, 1700 Lumens, Beam pattern Flood, Black alu housing, Clear polycarbonate hardcoated lens, Standard steel U bracket. Power consumption 33 W. DT connector, 24 volt, Water protection class: IP69K. EMC R10 approval.

2193177

$279 EACH

Multi purpose / lamp bracket

Aluminium bracket to fit the new roof rail system. This small, easy to fit bracket, makes it possible to mount worklamps, roof warning systems etc in the roof rail system.

For New Truck Generation models only

2439366

$59 EACH

Aurum lowprofile, fully equipped, amber LED warning system - 1778 mm

Modern, low profile full LED roof mounted warning system. Width 1778 mm ( 70 inches ). This size fits perfectly on the roof rails of the New Generation Scania. Fully equipped, with amber LED’s in all positions. Orange top plate. Easy wiring connections and installation. 24 V. Standard brackets included. Approved to ECE R10 & R65 regulations. ( Use 4 x roof rail bracket p/n 2439366 for mounting in new roof rails ).


2614249

$3,799 EACH


Lockable fuel cap

Scania filler cap. Lockable, without chain

2276408

$59 EACH

Bulb and Fuse Kit

$49 LED Headlights 2402377

$79 H7 Headlights 2402374

FROM $49

Smoke detector

Specially developed vehicle fire smoke detector sounds the alarm when it senses fire smoke in the cab.

1865071

$149 EACH

Scania Welcome Light kit

The kit consists of 2 x complete LH and RH lamps, replacing the standard step well lamps. Easy to mount, using just a scewdriver with “plug and play” connection to the original cable harness. Note. Fits only to trucks ordered with originally fitted foot step well lamps.


Scania 181000002061 V8 181000001061 XT 181000004061 Griffin 181000003061

$299 EACH KIT FITTED


Scania Bull Barsn 5 bar options available

n All bars fully compliant with FUPS ADR 84

n All bars fully compliant with Lighting ADR 13

n Dual Indicator & Front Position Light on outside post

n All bars tilt to allow access to change out of truck headlights, indicator & fog light globes

n Compatible with Factory supplied Towing Eye for vehicle recovery

n Single Road Train & Double Road Train have warning sign options

n Eye Bolt or Retaining Bolt option available on all styles

Bull Bars

High Bumper Metro

Weight 116 kg, Clearance to ground 352 mm


1210NTGHB

$7,299 EACH


Normal Bumper Single Road Train



1260NTGNB

$7,799 EACH

Normal Bumper Double Road Train



1285NTGNB

$8,299 EACH

Normal Bumper Metro



1210NTGNB

$7,299 EACH

High Bumper Single Road Train



1260NTGHB

$7,799 EACH


styling

Designedto matchyour tasteWe know all our truck owners and drivers have a soft spotfor styling equipment. We know we do. And while you are busysaving fuel and driving comfortably – why not do it with style?Our styling solutions will not only strengthen your personalstatement. You will also be more relaxed and satisfied in a truckthat is more pleasing and better looking. A place that feels likeyou, like home.

Wheel nuts - Stainless steel

The right caps protect the wheel nuts and also create a smarter appearance. Stainless steel and Scania logotype in relief. Suitable for both truck and bus. Supplied in packages of 10 caps.

1872116

$39 EACH PACK OF 10

Hub Cap - Polished

Hub cap with Scania symbol in polished version. Adapted for single reduction axles on P, G and R-series. Can be used for vehicles with or without tyre pressure monitoring. Suitable for both truck and bus. Sold individually.

1908390

$399 EACH

Hub Cap - Scania symbol, gold

Unique hub cap with Scania symbol, gold, in centre. Sold individually.

2292000

$199 EACH


Hub Cap - Scania embossing

Hub cap with Scania embossing. For 22.5-inch wheels on the non-driving axle. Suitable for both truck and bus. Per axle (sold in pairs).

090100001061

$349 EACH PAIR FITTED

Includes Stainless Steel Wheel Nut Set from page 13

Hub Cap - Stainless steel

Hub cap with embossed Scania symbol in stainless steel. Suitable for 22.5-inch wheels on non-driving axles. Suitable for both truck and bus. Per axle (sold in pairs).

090000001061



Hub Cap - Open center

Scania hubcaps in stainless steel. For 22.5-inch wheels for the non-driving axle. Suitable for both truck and bus. Per axle (sold in pairs).

090000002061



Hub Cap - Polished

Per axle (sold in pairs).

090000003061




Wheel Trims - Steering Axle

For steering axle. Sold in pairs

1878132

$199 PER SET

Wheel Trims - Driving Axle

These high-quality wheel trims in polished stainless steel protect the wheels and wheel studs and give the vehicle a whole new appearance at the same time. Scania logotype in the centre. Suitable for 22.5-inch wheels. For driving axle. Sold in pairs.

1878133

$199 PER SET

Air Horn

Scania branded rectangular front, length 74cm.

Horn composition in steel. Horn finish in chrome. The horn comes with a front support bracket. Installation kit 2594622 required to fit - $79.99 each.

2433776

$399 EACH

Griffin Cab Decal - Silver 1827 x 1007 mm

Suits R & S series NTG Models.

2536321

$499 PER SET

Griffin Cab Decal - Black 1827 x 1007 mm

Suits R & S series NTG Models.

2823130

$499 PER SET


Exterior Accessories

Bycool SLIM

The Bycool SLIM has a lower height profile compared with the Bycool Compact 1.4 or Bycool Compact 3.0. Its design is also more aerodynamic, making it even easier for you to reduce your fuel consumption. The Bycool SLIM is a 1400W cooling system driven by an electric compressor. The unit is suitable for dual battery systems. The part number includes the pre-fitted unit, cable harness (does not need to be used if cable prep. FPC5168B has been preselected) and parts for reinforcing roof-mounted wind deflectors, for example, as it needs to be cut to size in order to fit with the cab cooling. The dimensions of the Bycool SLIM are (LxWxH mm) 896x874x116 mm, and it weighs about 34 kg. When installed, the unit adds an extra + 144 mm or so to the height of your vehicle, which means that it is necessary to measure the total cab height with the cab cooling fitted so as not to exceed any height restrictions. Please download Mounting instructions, Spare parts list and User manuals at http://scania.dirna.com/

$3,999 EACHFor New Truck Generation models only2760059

Stoneguard

Made from black mesh and easily installed. Forms a barrier from stones and road debris Avoiding windscreen damage and costly delays.


L03323

$899 EACH


Headlight Protector

Made from durable plastic. Protects headlights from cracks and scratches. Perfectly fits the design of the truck you won’t even know it’s there.


Left side L83529 Right side L83530

$59.99 EACH

Wind deflectors (Non tinted plastic)

Wind deflectors made of transparent plastic. Easy to fit with adhesive tape.


Left side 184500003061 Right side 184500002061

$149 EACH FITTED

Weathershields

Made from Durable plastic. Stylish and wider full size design helps protects you from the rain, dust and sun. While enjoying the fresh air as you drive.


Left side L83527 Right side L83526

$99.99 EACH


Mudflaps

Mudflaps - Scania V8 logo

Black plastic, with Scania V8 logo. With spray supression, H = 250 mm, both left and right sides.

Left side 190500003061 Right side 190500004061

$110 EACH FITTED


Mudflaps - Scania Watermark (H = 270 mm)

Fits both left and right sides. Scania mud flap with spray suppression with an anti-spray surface. Black plastic. Reduces wheel splatter and water spray for increased comfort and safety for others on the road. The legal requirement (91/226/EG) for spray-suppression equipped trucks is 200 mm from the bottom edge of the mudflap to the ground, measured on an unloaded truck.

190500001061

$89 EACH FITTED

Mudflaps - Scania Watermark (H = 330 mm)

Fits both left and right sides. Scania mud flap with spray suppression with an anti-spray surface. Black plastic. Reduces wheel splatter and water spray for increased comfort and safety for others on the road. The legal requirement (91/226/EG) for spray-suppression equipped trucks is 200 mm from the bottom edge of the mudflap to the ground, measured on an unloaded truck.

190500002061

$109 EACH FITTED

Mudflaps - Scania XT logo (H = 238 mm)

Black plastic, with grey Scania XT logo, With spray supression. H = 238 mm.


190500005061

$109 EACH FITTED


Black plastic, with grey Scania XT logo, With spray supression. H = 298 mm.


190500006061

$119 EACH FITTED


Black plastic, with grey Scania XT logo, With spray supression. H = 358 mm


190500007061

$129 EACH FITTED


Light bars

Kit light bar long, with LED for high roof + 4 x Cibie lamps

Kit consisting of 1 x 2433077, stainless steel roof light bar, long for high roof with styling LED + 4 x 2447400, Cibie Super Oscar LED, Chromium, with LED position light. Ref 27.5. Note: the long version will not fit -17 cabs with roof air deflectors.

$3,799 EACHFor New Truck Generation models only2603738

Kit front light bar, with LED + 4 x Cibie lamps (image shown above)

Kit consisting of 1 x 2532777, stainless steel front light bar, with styling LED + 2 x 2447400, Cibie Super Oscar LED, Chromium, with LED position light. 230 mm + 2 x 2596713, Cibie Oscar LED 180 mm.


2603728

$3,299 EACH

Kit front light bar, without LED + 4 x Cibie lamps (image not shown)


2603731

$2,999 EACH


Cibie Super Oscar and

Oscar LED Spotlamps.

SpotlightsPowerful LED beam of 1 200 lm ( Oscar 700 lm ), providing 500 m ( Oscar 370 m ) reach and 50 m ( Oscar 40 m ) width. High luminous intesity of 125000 cd ( Oscar 75000 cd ) and colour temerature of 6000 K, which gives daylight perception. LED technology gives a low power consumption, about 70 % less vs Halogen. The lamp has been tested fully submerged and is waterproof acc. to IP67. Certified to ECE / CCC.

Super Oscar, 230 mm, LED, Broad beam, LED position lights, Chromed

Full LED spotlamp, Chromed alu housing and trim ring, Clear plastic lens, IP67, 12V / 24 V.

2447400

$499 EACH

Oscar, 180 mm, LED, Broad beam, Chromed

Full LED spotlamp, Chromed alu housing and trim ring, Clear plastic lens, IP67, 12V / 24 V.

2596713

$499 EACH


Seat Covers

XT Seat cover, Foldable/Reclining

A hard-wearing seat cover with a unique design. Protects the seat against dirt and dust. The XT logo is on both the head support and on the side of the seat. You can use the seat as a table when it is folded up.


2642236

$249 EACH

XT Seat cover Medium Plus

A hard-wearing seat cover with a unique design. Protects the seat against dirt and dust. The XT logo is on both the head support and on the side of the seat.


Right Seat 2642238 Left Seat 2642239

$249 EACH

Sheepskin seat cover

Made in Australia

The Scania sheepskin seat cover ensures that you can sit more comfortably during long drives. Wool’s warming and cooling properties makes the seat pleasurable in all temperatures, as it has the ability to absorb moisture. The sheepskin cover is also pressure-relieving

183500001061

$429 EACH FITTED


Conveniences

Kettle

When you need a pot of tea, cup of coffee or a mug of soup, this kettle is the solution for you. The Scania approved kettle is a 24V unit, with automatic cut-off overheating protection. The kettle can be fixed to the instrument panel together with the mounting frame (included). Features: 24V. 300W. 1 L capacity. Soft touch on/off buttons. automatic cut-off overheating protection.

2323638

$49 EACH

Dometic coffee maker

Equipped with mesh filters and has a transparent water container with cup capacity marked. The coffee pot is secured while the vehicle is being driven. Capacity for 5 cups (680 ml). 24 V. Supplied with a bottom plate for securing in the cab.

2439387

$99 EACH

Microwave oven 20L for NTG Highline - Includes Assembly kitThe cab must fulfil roof height High, FPC 584D and be equipped with microwave oven prep., FPC 6542B. This microwave oven is supplied with a kit which contains an installation system for the shelf, an inverter and an off button which prevents battery drain. The off button will automatically deactivate the inverter after 30 minutes. This minimises the risk of draining the starter battery.


2617194

$999 EACHCable harness may be required if not fitted in the factory


Waste bin

Use the Scania waste bin to keep the cab tidy. The bin is made of fabric and fits neatly into several places in the cab.


2116993

$39 EACH

Waste bin with cover

The waste bin is produced to fit the door pocket in the NTG, P/G/R/S cab. It can also be used in other locations, thanks to the Velcro strap on the rear. It is made of sand coloured plastic to match the cab interior. The waste bin holds approximately 1.25 litres and has a cover to seal in unpleasant odours.


2117011

$79 EACH

Tablet holder kit

The kit consists of the tablet holder as well as the parts needed for installation in the instrument panel. Only fits in the instrument panel in NTG cabs. The tablet holder consists of a jointed support arm and a holder than can be tilted upwards and downwards as well as rotated 360° in order to achieve the optimum position for the tablet PC. The holder on the support arm can be expanded and has a measurement range of 137-225 mm. The maximum load the tablet holder can support is 800 grams. Please note! A tablet PC is not included in the delivery, nor any wiring for charging the tablet PC.

$279 EACH

Mattress Pad 670mm

Made-to-measure mattress pad for the bed. Mattress pads are not only ideal for enhancing your sleep and keeping you cool, they can also extend the life of your mattress. Mattress pads are easy to lift off for airing and cleaning.

$199 EACH

For New Truck Generation models only2674928

For New Truck Generation models only2231388


Storage

Storage Box

Designed to fit under the bed, on either side.

Holds approximately 29 litres.

Fits R & S cabs.


2449591

$79 EACH

Storage bar kit with Scania logo

A simple and accessible storage option to store your personal belongings. Consists of a bag in the centre with the Scania logo on the front and a storage net on either side each containing four mesh pockets. Specially designed to fit on the storage bar mounted on the back wall of the cab.

(Storage bar must be ordered from the factory option code FPC 05210A)


2642931

$299 EACH

Storage bar kit with XT Logo

A simple and accessible storage option to store your personal belongings. Consists of a bag in the centre with the XT logo on the front, and a storage net on either side each containing four mesh pockets. Specially designed to fit on the storage bar mounted on the back wall of the cab.

(Storage bar must be ordered from the factory option code FPC 05210A)


2629504

$299 EACH


Carpet matsLoose mat in fabric, black or sand. A fabric mat creates a snug and cosy atmosphere and facilitates cleaning the cab. The mat has an upper side in soft durable fabric and underside in rubber.

Carpet Mats - Sand


Driver’s Mat 2095284 Passenger Mat 2109583

$79 EACH

Carpet Mats - Black



$79 EACH

Driver’s side - V8

Loose mat V8. The V8 mat is soft and provides insulation, and creates a cosy and exclusive atmosphere. The mat has an upper side in durable fabric with red contrast seams and an inlay of leather with the V8 symbol embossed. Underside in rubber.



$329 EACH

SCANIA Australia Pty. Ltd.

212-216 Northbourne Rd,

Campbellfield, VIC, 3061

SA

U2

02

0-3

-Ac

ce

sso

rie

s

Documents

SCANIA ACCESSORIES...2 Scania Vehicle Accessories Scania Vehicle Accessories 3 No one is prouder of their new Scania than you, so why not add that little extra stamp of personalisation