Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
SCAFFOLDING DIVISON
136 TOMAN BAY St., 11321 – ZEITOUN CAIRO – EGYPTTel. & Fax: (202) 2240 1165 - (202) 2640 0909
Mobile: (2010) 111 3258 - (2012) 111 3258Web: isotermica-eg.com
Tel.: +971 2 672 4343 Fax: +971 2 674 0245Mobile: +971 502653747
P.O.Box: 109605 - Abu Dhabi, U.A.EWeb: montisol.ae
MAIN CLIENT
FOREWORD
Our Company, founded in 1982, is one of the leading Insulation, Refractory & Painting Contractor in
Egypt, where it has greatly contributed to the industrialization process.
We diversified early and expanded successfully into these fields:
INSULATION (Hot, Cold & Acoustic).
REFRACTORY.
HVAC SYSTEM and DUCT WORKS.
FIRE PROOFING.
LIGHT STEEL STRUCTURES.
BLASTING and PAINTING.
SCAFFOLDING.
Our Company is always up-to-date with the most recent technology, is very well known in the above
mentioned Fields, for the high degree of specialization of our technicians and engineers and our skilled
workmanship; it owes its success to the close cooperation given to the Customers.
Throughout our existence we have striven for excellence and we pride ourselves in the quality of our
work and our ability to meet our commitments.
This is what we offer to our Customers.
THE MANAGEMENT,
With the Compliments of
SCAFFOLD FITTINGS
Quality Standards:(where applicable)
EN 74 Class A&BBS1139 Part 2ISO 9001 : 2000
AvailableFinishes :(depands on qty)
INNER JOINTSize: 48.3mmFor vertical and Handrailapplication.
DROP FORGEDPUTLOG COUPLERSize: 48.3mmUsed for the connection ofputlog and transom toledgers.
GIRDER COUPLERFIXEDSize: 48.3 mmoProvides a fixed 90o
coupling of a scaffoldtube to an ‘I’beamgirder.Must be used in paris.
BORAD RETAININGCOUPLERSize: 48.3mmBoards are quackly locked in thecorrect position providing highresistance to both lataral andupward movement.
DROP FORGED SWIVLECOUPLERSize: 48.3 mmUsed for the connection of twotubes at any angels.
SLEEVE COUPLERSize:48.3mmUsed for the external connectionof two tubes end-to-end.Provides a more secure Joint thanthe Joint Pin.
DROP FORGEDDOUBLE COUPLERSize: 48.3mmUsed for the connection oftwo tubes at right-angeles.
Zinc PlatedGold PassivatedPowder Coated
WOODEN/LAMINATED BOARDS
BS 2482 SCAFFOLD WOODEN BOARD
Our scaffold boards fully comply with the standards issued
by the British Standard Institute and are monitored for
quality under ths ISO 1900 accreditation.All BS2482:1981
scaffold boards are marked with the following information,
which is embossed on the end band.
BS2482
The word “support every 1.5m Or 1,2mm max”
It is used as a temporary accss platform.
Standard size:38mmX255mmX3.9m long.
Shorter lengths also available depend on the quantity
SCAFFOLD LAMINATED BOARDLaminated board is manufactured from LVL
(Laminated Veneer Lumber). The structural uniformity
of LVL makes it the perfect solution for a safe,lightweight
scaffold board.
Each Board is made from many layers of thin veneer,
which increases the reliability and strength of the product
Size: 39mmX255mmXlength
:42mmX255mmXlength
Unit weight:4.9kg/m
Every board is individually proof used to verify that it
conforms to OSHA deflection limits before being branded
as a scaffold board
shorter lengths also available depend on the quantity
GIN WHEEL PULLEYUsed to assist the loading of supplies andequipmentonto a scaffold.
BASE JACKSize: 150X150 X 760mm(L)Available in Galvanized or Painted version.
SCAFFOLDER SAFETY HARNESSCE Approved and Conforms to Europeannorm EN 361.
BASE PLATEUsed to distribute the load ofscaffolding installationSize:150mm X 150mm X 5mm (thk).
T-BOLT WITH NUT ANDWASHER(ZINC PLATED)For droped forged coupler usage andwhenever.
SCAFFOLDER MEASURMENTTAPE(5m)long
SCAFFOLD CLAMP LIFTINGBAGUsed for lifting clamps to upper height.S.W.L: 50KGS.
SCAFFOLD TAG AND HOLDERTo indicate the safety level forscaffolding during erection, after completionand also durng dismantling.
FULL SET SCAFFOLDER’SLEATHER BELT.Comes complete with tools and holders.Spanner.Ratchet.Spirit Level.Measuring Tape
SPIRIT LEVELScaffold bridge level(Magnetic)made ofaluminiumSpecially designed to be Used with all tybesof scaffoldingfor easy and accurate level reading.
SCAFFOLDER SPANEERScaffolder spanner 7/16is made for use on BS/EN scaffold couplers.It is made from high quality Chromevanadium steel and heat treated fordubrable and longer life span.
TOOLS / ANCILLARY
RUBBISH PUBBER CHUTE
RUBBISH PUBBER CHUTE• Fiber reinforced rubber with exclusive solid tire technology anti-ageing,durable.
• Soft and elastic,compressible with hands!with minimum noise in use!
• Ecological formula.No uncomfortable smell!No carcinogenic cyano-anyline!
• Easy to dismantle ,no damage to slab ,when using a special beam bracket.
• Only company in the world ,with cutting edge technology in designing rubble chute for skyscarpers.
PATENT NO.02238257.7MINIMUM NOISE! ECOLOGICAL FORMULA!
Top enner Diametre
Bottom inner Diametre
Total length
Usable length
Wall thickness
Rib thickness
weight
Steel chain
Standard section
510mm
370mm
1100mm
1000mm
5mm
5mm
16.3kg
Diameter 8mmworking load-1000kg/chain
Stell Hopper
510mm
446mm
510mm
490mm
-
-
24kg
-
ONLY RUBBER CHUTE IN THE WORLD DESIGN FOR SKYSCARPERS
PUBBER PROPERTIES
Standard Section Steel Hopper
Secure Linking Complete Section
Elongation
Tensile Strength
Breaking Strength
Wearability
Shore A Hardness
≥ 135%
≥ 7.5Mpa
≥ 62kg/cm
≥ 0.14cm3/mile
≥ 76
THE REFUSE DISPOSAL CHUTES
Technical Data
Material
Colour
Total length
Working length
Diameter(Top)
Diameter(Bottom)
Impact strength
Tensile stringth
Elastic coeflcient
Bending strength
Moisture Absorption
Rockwell Hardness
Specilc Gravity
HDPE
Orange
1170mm
1070mm
540mm
460mm
27.6 KGF CM/CM2
276.2 KGF
8000 KGF/CM2
250.3 KGF/CM2
<0,01%
»hore 70 D
0.95
Straight chute
HDPE
Steel intake
Material
Body
M-Hopper
Floor Bracket Parapet Bracket Beam Bracket Straight Chute
Beam Mount
Parapet Mount
Slab I Floor Mount
PASSENGER/MATERIAL HOIST
Our Construction hoist is rack and pinion passanger/material lift,bieng widely used oan a great varietyof high-rise construction projects. our hoist has the following advantages:
Safe and reliableReasonable design,smooth running and high work efficiency.Easy installation ,dismantlement and maintenance.
Model
SC 100
SC 100/100
SC 200
SC 200/200
SC 270/270
Description
Single Cage
Twin Cage
Single Cage
Twin Cage
Twin Cage
Capacity
1000kg
1000kg
2000kg
2000kg
2700kg
Normal Speed Hoist-40m/min
Model
SCD200/200VA
SCD270/270VA
Discription
Twin Cage
Twin Cage
Capacity
2000kg
2700kg
High Speed Hoisy - 60m/min
Model
GP1200HD
GP1200HD
Discription
Single Cage
Twin Cage
Capacity
1200kg
1200kg
Normal Speed Hoist-30m/min
Wickham Hoist
Specification
Model
GP2000HS
GP2000HS
Description
Single Cage
Twin Cage
Capacity
2000kg
2000kg
Medium Speed hoist - 40m/min