SC5000 Product Information 7.11

8/6/2019 SC5000 Product Information 7.11

1/8

SC5000 Unit

Product Information


2/8


3/8

SC5000 Unit

Side View, With Hood

10

10.25

8.75


4/8


5/8

SC5000 Unit

Product Notes

Arm Count - By Projection:

82 2 Arms up to 200

3 Arms from 201 to 2311


100 2 Arms up to 200



116 2 Arms up to 1911



130 2 Arms up to 2111

3 Arms from 220 to 31114 Arms at 320

Installation Bracket Count

Hood Bracket Count (width):

3 up to 1511

4 from 160 to 2011

5 from 210 to 25 11

6 from 260 to 3011

7 from 310 to 3511

8 from 3360 to 400

Minimum Widths:

67 projection - 81 wide




130 projection - 150 wideup to 1211 3 3 NA NA

130 to 1611 4 4 4 4

170 to 1911 5 5 5 5200 to 2211 6 6 6 6

230 to 2311 7 7 7 7

240 to 2611 8 7 7 7

270 to 2711 8 8 7 8

280 to 320 8 9 8 7

UNIT WIDTHPROJECTION

82 100 116 130


6/8

SC5000 Unit Parts

Shoulder

right # 201028 R

left # 201028 L

sold as each, complete

Wall Install Bracket

# 204015

sold as each

complete w/ hardware

Arm Wrist

# 190221

sold as each,


Soffit Install

Bracket

# 201010

sold as each,


Torsion Bar 40mm# 380270

sold by the foot

Torsion Bar End Caps -40mm

# 144043

sold as a pair

Front Bar End Caps

# 140310

sold as a pair

in colors

Front Bar

# 362370

sold by the foot

Hood Side Cover

# 170212

sold as each,


Hood Bracket

# 170208

sold as each,complete w/ hardware

Hood Profile

# 393670

sold by the foot

Hood

Splice Kit

# MC-HSK

sold complete


7/8

SC5000 Unit Parts

End Bracket

# 201507

sold as each,


Arm - Right (each)

6-7 #200EXCR

8-2 #250EXCR

10-0 #300EXCR

11-6 #350EXCR

13-0 #400EXCR

Arm - Left (each)

6-7 #200EXCL

8-2 #250EXCL

10-0 #300EXCL

11-6 #350EXCL

13-0 #400EXCL

Front Bar Splice Kit# 170211

sold complete

9 Roof

Mount Bracket

# ECRMB

sold complete

Pivot End Bushing

# 93050200

sold as each

Build Out Plate

for Install Bracket

0.50 Thickness # BOP

sold as each

Center

Support

# 110314

sold as each,


70mm Roller Tube

# RP-992-1

sold by the foot

13-0 projection only

70mm Pivot

Gudgeon

# 12700300

sold as each

78mm Roller Tube# 318070

sold by the foot

5-0 to 11-6 projection

78mm Pivot

Gudgeon

# 128003

sold as each

70mm Gear End

Gudgeon

# 12700200

sold as each

78mm Gear End

Gudgeon

# 128002

sold as each


8/8

DI AWNINGS LLC LIMITED WARRANT

DIYAWNINGS, LCC (AKA) DIYAWNINGS.US warrants the awning frame work, awning frame finish, fabric covers,motors and electronics, if so equipped, to be free from defects in materials and workmanship under normal and properuse for the following duration, all commencing from the date of sale:

FRAMEWORKThe awnings aluminum framework is warranted against material failure due to quality and workmanship.

SC1000 models: For a period of three (3) yearsSC4000 models: For a period of five (5) yearsSC5000 models: For a period of seven (7) years

FRAMEWORK FINISH (POWDER COATING)The framework finish is warranted against fading, blistering, peeling, or delaminating from the aluminum framework.

SC1000 models: No warrantySC4000 models: For a period of three (3) yearsSC5000 models: For a period of five (5) years

FABRIC CO ERS AND FABRIC SEAMSAwning fabric cover, sewing and seams are warranted against excessive loss of color or strength from normal exposure

to sunlight and atmospheric chemicals.SC1000 and SC4000 models: For a period of five (5) yearsSC5000 models: For a period of ten (10) years

Exceptions to this fabric warranty are as follows:I. The formation and presence of mold and/or mildew are not covered under the terms of this warranty. Mold and

mildew will not grow on a man made fiber (acrylic) unless there is an organic matter (dirt) for the mold or mildew togrow on. Reasonable care should be taken to clean the fabric cover of any surface dirt or other organic matter toprevent the formation of mold and/or mildew.

II. Waffling or puckering of the fabric around or near a fabric seam may occur anytime during the life of your product.This occurrence does not affect the performance of the fabric and is not considered a product flaw or defect.

III. The inevitable discoloration, scarring or premature wear of the fabric on units equipped with a center support anySC5000 model over 200 wide. It is understood, by acceptance of this warranty, not to be covered under the termsof this warranty. Center supports come in direct contact with the fabric and they are known and accepted to causeany and/or all of the above-mentioned symptoms.

MOTORSThe optional motor, if so equipped, is warranted for a period of (5) five years on all models. Although the motors used inour products are rated for outdoor use, adequate steps must be taken to protect them from rain, sleet etc. Motor damagedue to water infiltration is not covered under this warranty.

ELECTRONICS:Electronic accessories are warranted for a period of (5) five years for all models. In addition, it is understood, byacceptance of this warranty, that optional electronic accessories purchased to help protect the value of your awning (i.e.wind sensors, sun/wind sensors, etc.), are not sold as a guarantee, but as an added level of protection to guard yourawning from damage associated with acts of nature. Reasonable care and use of your awning is the responsibility of theowner and should not be entrusted to electronic devices.

Any defects in the awning must be reported within the warranty period listed above. Under this warranty, DIY AWNING,LLC reserves the right to repair or replace those parts that have been returned or are deemed defective. If any item is

replaced due to a warranty claim, the warranty is not extended on the replaced item, but rather applies to the originalwarranty period. This warranty is non-transferable.

This limited warranty does not cover defects caused by faulty installation, reinstallation, or service by the homeowners orany other entity. DIYAWNINGS, LLC is not responsible for normal wear and tear, damage caused by misuse, vandalismand acts of nature such as, but not limited to, hurricanes, tornadoes, wind, hail, flooding, fire, snow loads, rain or rainaccumulation.

Labor cost for the removal and reinstallation of awning parts is not covered by this warranty and is the responsibility ofthe home owner. Any defective part must be returned to DIYAWNINGS, LLC.

DIYAWNINGS, LLC shall not be liable for any incidental or consequential damages, loss or injury. This warranty givesyou specific legal rights, but you may also have additional or other rights, which may vary from state to state.

Documents

SC5000 Product Information 7.11