Embed Size (px)
Citation preview
CNC slant bed lathe
SBE 300 CNC high performance
TECHNICAL PARAMETERS
TRENS SK, a.s. | Súvoz 1 | 911 32 Trenčín | SlovakiaTel.: +421 32 7412 111 | [email protected] | www.trens.sk
Machine type Unit SBE 300 CNC high performance
Working range Max. swing over bed mm 530Max. turning diameter mm 320/260*Max. turning length between chuck and tailstock mm 500Max. bar diameter mm 50Max. bar diameter with bar feeder reduction bushing mm 43Max. workpiece weight clamped between centers kg 200Max. workpiece weight clamped in chuck kg 80
Main spindle Spindle nose (DIN55026 A and ISO702-I A2) A2-6Spindle bore mm 65Spindle diameter in the front bearings mm 100Max. spindle speed min-1 4000Recommended chuck diameter mm 210
Spindle drive Main motor output S1 kW 11Main motor output S3 kW 15Torque S1 Nm 84,0Torque S3 Nm 152,8
Carriages drives X-axisCross-slide feed range mm.min-1 1÷10000Cross-slide rapid traverse mm.min-1 24000Working travel mm 198
Z-axis Longitudinal-slide feed range mm.min-1 1÷10000Longitudinal-slide rapid traverse mm.min-1 30000Working travel mm 550
Tool systems12-position turret PRAGATINo. of tool positions 12Turret disc type (12-position) Slotted disk/VDI disk*Tool shank diameter of VDI disc (DIN 69880)* mm 30*Max. tool cross section mm 20×20
Tailstock*Tailstock sleeve internal taper MORSE 4*Hydraulic travel of tailstock mm 500*Clamping force range daN 50-600*Tailstock control programovatelný pojazd*
Machine dimensions Height mm 1820Width mm 2020Length with chip pan/chip conveyor to the right side* mm 3320/4220*
Weight Weight – execution with tailstock kg cca 3500
Parameters in bold letters are valid for the standard machine execution* Valid for options
CNC slant bed lathe • for machining in two controlled High accuracy and reliability• for continuous operation Modular machine conception –• possibility to change machine options throughout its lifetime30% energy saving – • digital drives with energy recovery during braking
ww
w.tren
s.sk
CNC slant bed lathe SBE 300 CNC high performance CNC slant bed lathe SBE 300 CNC high performance
OPTIONS
12-position axial disc type VDI 30 for turret PRAGATI with non-driven • positions, (max. turning diameter 260 mm)
Mechanical 4-jaw self centering steel chuck ø 200 mm, max. • speed 4000 min-1
Hydraulic 3-jaw self centering chuck ø 210 mm with through hole • ø 50 mm
Hydraulic 4-jaw chuck ø 210 mm with through hole ø 50 mm• Hydraulic collet chuck for bars up to ø 60 mm• Programmable tailstock•
Chip conveyor to the right side• Tool probe RENISHAW® HPPA manually actuated swing down tool • setting arm
Parts catcher• Electronic preparation for bar feeder• Bar feeder• Set of tool holders for slotted disc• Set of tool holders packet for VDI 30• Wide range of optional accessories•
CNC slant bed lathe for performance turning of high precision fl ange and shaft shape workpieces. Proven machine
design with high rigidity. Digital servo drives with ground ball screws and linear roller guideways with direct X-axis
measuring. Reliability even in most demanding technological conditions. The machine in confi guration with pro-
grammable tailstock and bar feeder is suitable for high performance and maximum turning productivity in mass
production.
STANDARD
Control system FANUC 0i TD with full version of programming • software ManualGuide i
Vector controlled asynchronnous electro motor for main spindle • drive 11/15 kW (S1/S3)
Max. turning diameter 320 mm (with Slotted Disc)• Max. length of the workpiece 500 mm• Spindle bore 65 mm with spindle nose A2-6 DIN55026 A and • ISO702-I A2
Spindle speed 4000 min• -1 Turret PRAGATI with 12-position Slotted disc, non driven positions • Preparation for hydraulic through-hole clamping for bars up • to ø max. 50 mm (hydraulic aggregate, hydraulic cylinder and clamping control)
Without tailstock•
Chip pan• Complete tool cooling device with 0,4 MPa pump • Rapid traverse X-axis 24 m.min• -1 , Z-axis 30 m.min-1 Direct measuring in X-axis by linear scale • Without spindle brake• Manual door opening• Automatic central lubrication• Work space illumination• Linear roller guideways • Voltage 3×400 V /50 Hz • CE execution •
12-position turret PRAGATI Slotted disc for 12-position turret Hydraulic clamping cylinder
VDI disc for 12-position turret
Programmable tailstock
Hydraulic collet chuck for collets 185E for bars up to ø 60 mm
Parts catcher
3-jaw hydraulic chuck
Tool probe RENISHAW with manually actuated swing down tool setting arm
Linear roller guideways Direct measuring of X-axis by linear scale HEIDENHAIN
ww
w.tren
s.sk
CNC slant bed lathe SBE 300 CNC high performance CNC slant bed lathe SBE 300 CNC high performance
OPTIONS
12-position axial disc type VDI 30 for turret PRAGATI with non-driven • positions, (max. turning diameter 260 mm)
Mechanical 4-jaw self centering steel chuck ø 200 mm, max. • speed 4000 min-1
Hydraulic 3-jaw self centering chuck ø 210 mm with through hole • ø 50 mm
Hydraulic 4-jaw chuck ø 210 mm with through hole ø 50 mm• Hydraulic collet chuck for bars up to ø 60 mm• Programmable tailstock•
Chip conveyor to the right side• Tool probe RENISHAW® HPPA manually actuated swing down tool • setting arm
Parts catcher• Electronic preparation for bar feeder• Bar feeder• Set of tool holders for slotted disc• Set of tool holders packet for VDI 30• Wide range of optional accessories•
CNC slant bed lathe for performance turning of high precision fl ange and shaft shape workpieces. Proven machine
design with high rigidity. Digital servo drives with ground ball screws and linear roller guideways with direct X-axis
measuring. Reliability even in most demanding technological conditions. The machine in confi guration with pro-
grammable tailstock and bar feeder is suitable for high performance and maximum turning productivity in mass
production.
STANDARD
Control system FANUC 0i TD with full version of programming • software ManualGuide i
Vector controlled asynchronnous electro motor for main spindle • drive 11/15 kW (S1/S3)
Max. turning diameter 320 mm (with Slotted Disc)• Max. length of the workpiece 500 mm• Spindle bore 65 mm with spindle nose A2-6 DIN55026 A and • ISO702-I A2
Spindle speed 4000 min• -1 Turret PRAGATI with 12-position Slotted disc, non driven positions • Preparation for hydraulic through-hole clamping for bars up • to ø max. 50 mm (hydraulic aggregate, hydraulic cylinder and clamping control)
Without tailstock•
Chip pan• Complete tool cooling device with 0,4 MPa pump • Rapid traverse X-axis 24 m.min• -1 , Z-axis 30 m.min-1 Direct measuring in X-axis by linear scale • Without spindle brake• Manual door opening• Automatic central lubrication• Work space illumination• Linear roller guideways • Voltage 3×400 V /50 Hz • CE execution •
12-position turret PRAGATI Slotted disc for 12-position turret Hydraulic clamping cylinder
VDI disc for 12-position turret
Programmable tailstock
Hydraulic collet chuck for collets 185E for bars up to ø 60 mm
Parts catcher
3-jaw hydraulic chuck
Tool probe RENISHAW with manually actuated swing down tool setting arm
Linear roller guideways Direct measuring of X-axis by linear scale HEIDENHAIN
CNC slant bed lathe
SBE 300 CNC high performance
TECHNICAL PARAMETERS
TRENS SK, a.s. | Súvoz 1 | 911 32 Trenčín | SlovakiaTel.: +421 32 7412 111 | [email protected] | www.trens.sk
Machine type Unit SBE 300 CNC high performance
Working range Max. swing over bed mm 530Max. turning diameter mm 320/260*Max. turning length between chuck and tailstock mm 500Max. bar diameter mm 50Max. bar diameter with bar feeder reduction bushing mm 43Max. workpiece weight clamped between centers kg 200Max. workpiece weight clamped in chuck kg 80
Main spindle Spindle nose (DIN55026 A and ISO702-I A2) A2-6Spindle bore mm 65Spindle diameter in the front bearings mm 100Max. spindle speed min-1 4000Recommended chuck diameter mm 210
Spindle drive Main motor output S1 kW 11Main motor output S3 kW 15Torque S1 Nm 84,0Torque S3 Nm 152,8
Carriages drives X-axisCross-slide feed range mm.min-1 1÷10000Cross-slide rapid traverse mm.min-1 24000Working travel mm 198
Z-axis Longitudinal-slide feed range mm.min-1 1÷10000Longitudinal-slide rapid traverse mm.min-1 30000Working travel mm 550
Tool systems12-position turret PRAGATINo. of tool positions 12Turret disc type (12-position) Slotted disk/VDI disk*Tool shank diameter of VDI disc (DIN 69880)* mm 30*Max. tool cross section mm 20×20
Tailstock*Tailstock sleeve internal taper MORSE 4*Hydraulic travel of tailstock mm 500*Clamping force range daN 50-600*Tailstock control programovatelný pojazd*
Machine dimensions Height mm 1820Width mm 2020Length with chip pan/chip conveyor to the right side* mm 3320/4220*
Weight Weight – execution with tailstock kg cca 3500
Parameters in bold letters are valid for the standard machine execution* Valid for options
CNC slant bed lathe • for machining in two controlled High accuracy and reliability• for continuous operation Modular machine conception –• possibility to change machine options throughout its lifetime30% energy saving – • digital drives with energy recovery during braking
