Embed Size (px)
Citation preview
Millw
ork
Solu
tions
Scherer Bros.Lumber Co.
EXTERIOR DOOR SYSTEMS
IN STOCK SELECTION
Since 1930, Scherer Brothers has offered its customers quality and innovation.
Exterior doors are no exception!
We have partnered with our preferred suppliers to give you the best exterior door system available today.
• Wide selection of Douglas Fir doors to fit several applications.
• All doors are Select Grade - the toughest grading standards ensure only the best wood solid and veneers are used.
• Stiles and rails are engineered veneer over finger-joints to ensure stability and long term performance.
• All doors offer LoE glass when available.
• All grilles are True Divided Light unless noted.
• Oak, Cherry, Maple, Mahogany, Knotty Alder and many other species available by special order.
• 1 year warranty is standard.
• 5 year limited warranty on Performance doors.
• Lifetime Split Through warranty on doors with Raised Innerbond panels.
9266
2’ 8”
= 20 Minute Fire Rated Door
Wood E
ntry D
oors
3’ 0”
7130 6801Low-E
3’ 0”
2+ = Available with Removable Grilles. Special Order.
6803Low-E
3’ 0”
6813Low-E
3’ 0”
7015Low-E
2’ 6”
2’ 8”
3’ 0”
7002Low-E
Water Barrier
2’ 6”
2’ 8”
3’ 0”
2’ 0”
2’ 6”
2’ 8”
3’ 0”
7002+Low-E
3= 20 Minute Fire Rated Door
7662Low-E
2’ 8”
3’ 0”
WOOD ENTRY DOORS
7701+Low-E
1’ 0”
1’ 2”
7702+Low-E
1’ 0”
1’ 2”
7703Low-E
1’ 0”
1’ 2”
7705Low-E
1’ 0”
1’ 2”
7663Low-E
1’ 0”
1’ 2”
7218Low-E
3’ 0”
7228Low-E
3’ 0”
7219Low-E
1’ 0”
1’ 2”
1’ 0”
1’ 2”
6175Low-E
9541 - Dentil Shelf 9540 - Dentil Shelf
7215Low-E
1’ 0”
1’ 2”
5565
3’ 0”
5702Low-E
1’ 2”
KNOTTY ALDER
• Energy efficient polyurethane core.
• Available as 20 minute Warnock Hersey labled fire doors, as noted with symbol.
• High performance fiberglass facing will not dent and resists splitting, cracking and warping.
• Classic stile-and-rail grain detail provides wood-like appearance.
• Reinforced lock preparation provides greater security.
• Triple laminate engineered wood edge adds stability and real wood appearance.
• Caming available in Patina (Black) as noted for each decorative glass door style.
• Limited lifetime warranty.
• Door blinds are raise/lower/tilt integral blinds. Sidelites are stationary.
Fib
erg
lass E
ntry D
oors
4
2’ 8”
3’ 0”
F-39
2’ 8”
3’ 0”
F-34
2’ 8”
3’ 0”
F-89 F-90
2’ 8”
3’ 0”
2’ 8”
3’ 0”
F-30F-30 FR
= 20 Minute Fire Rated Door
FL-150OPP
1’ 0”
1’ 2”
FL-220OPP
1’ 0”
1’ 2”
2’ 8”
3’ 0”
F-31F-304
2’ 8”
3’ 0”
F-30OPP
2’ 8”
3’ 0”
F-89OPP
2’ 8”
3’ 0”
The Barrington® Sierra Series has been engineered to meet the design needs of Southwest, Spanish or Mediterranean style homes. The Sierra Series is available with a 2-Panel Camber. Like all Barringtons, the Sierra is the ultimate in authenticity. Sierra has a unique, custom panel profile and beautiful Mahogany grain texture.
3’ 0”
BS2CTCamber Top
BARRINGTON SIERRA
BS1FL
1’ 0”
1’ 2”
BlindsBL
5
The Barrington® Craftsman Series beautifully complements Mission or Craftsman style architecture with the durability of fiberglass. The Barrington® Craftsman features three recessed panels and a unique one-lite glazing system. The surface features a straight-grain hardwood texture that finishes easily and beautifully. A matching one-panel/one-lite sidelite panel is also available to provide even more design options.
INTERNAL BLIND DOORS & SIDE LIGHTS
Door blinds are raise/lower/tilt internal blinds. Sidelites are stationary.
2’ 8”
3’ 0”
F-37F-37-Brass
= 20 Minute Fire Rated Door
FL-150
1’ 0”
1’ 2”
FL-160
1’ 0”
1’ 2”
FL-230
1’ 0”
1’ 2”
F-150BL
1’ 0”
1’ 2”
F-220BL
1’ 0”
1’ 2”
F-30BL
2’ 8”
3’ 0”
F-89BL
2’ 8”
3’ 0”
3’ 0”
3 PNL BC4
3’ 0”
3 Panel BS1 3 Lite SDL
1’ 2”
1 PNL BSIS 1 PNL BC4S
1’ 2”
With Optional Dentil Shelf
BARRINGTON CRAFTSMAN
3’ 0”
3 PNL BS1
Fib
erg
lass E
ntry D
oors
• Energy efficient polyurethane core.
• Available as 20 minute Warnock Hersey labled fire doors, as noted with symbol.
• High definition fiberglass panels. Facing will not dent and resists splitting, cracking and warping.
• Square edge construction like a wood door.
• Reinforced lock preparation provides greater security.
• Composite bottom rail prevents water damage.
• Caming available in Patina (Black) as noted for each decorative glass door style.
• Finish with latex or oil paint.
• Limited lifetime warranty.
• Door blinds are raise/lower/tilt integral blinds. Sidelites are stationary.
2’ 8”
3’ 0”
A-30OPP
2’ 8”
3’ 0”
A-89OPP
1’ 0”
1’ 2”
A-150OPP
1’ 0”
1’ 2”
A-22OPP
A-89
2’ 8”
3’ 0”
A-90 †
2’ 8”
3’ 0”
2’ 8”
3’ 0”
A-31
2’ 8”
3’ 0”
A-30A-30 FR
2’ 8”
3’ 0”
A-39
2’ 8”
3’ 0”
A-34 †
2’ 8”
3’ 0”
A-37
6
† = Removable Wood Grilles
† = Removable Wood Grilles
3’-0” 3’-0” 1’-0”
1’-2”
2 PANEL SQUARE TOP
1 PANEL SQUARE TOP
WITH ELEMENT
1 PANELWITH ELEMENT
7
A-150
1’ 0”
1’ 2”
A-160 †
1’ 0”
1’ 2”
2’ 8”
3’ 0”
A-10A-10 FR
A-230 †
1’ 0”
1’ 2”
2’ 8”
3’ 0”
A-44A-44 FR
= Available as a 20 Minute Fire Rated Door
† = Removable Wood Grilles
• Primed white surface - finishing required.
• Foamed-in-place polyurethane core.
• Choose from a wide range of embossed designs or smooth flush face doors.
• Hinge locations are reinforced with steel plates.
• 24-gauge skins deliver exceptional structural stability and integrity.
• Unique interlocking metal edge system secures skins to side stiles and top and bottom rails, providing additional security.
• Caming available in Patina (Black) as noted for each decorative glass door style.
• 15 year limited warranty.
• Door blinds are raise/lower/tilt integral blinds. Sidelites are stationary.
Ste
el E
ntry D
oors
8
2’ 8”
3’ 0”
E-300PP
2’ 8”
3’ 0”
S-89OPP
E-34+†
2’ 6”
2’ 8”
3’ 0”
E-304
2’ 8”
3’ 0”
E-83+†
2’ 8”
3’ 0”
S-89*
2’ 6”
2’ 8”
3’ 0”
S-90+†*
2’ 6”
2’ 8”
3’ 0”
SL-150OPP
1’ 0”
1’ 2”
SL-220PP
1’ 0”
1’ 2”
S-11*
2’ 6”
2’ 8”
3’ 0”
E-39
2’ 6”
2’ 8”
3’ 0”
† = Removable Wood Grilles
9
2’ 6”
2’ 8”
3’ 0”
S-12*
2’ 6”
2’ 8”
3’ 0”
E-30+•
2’ 8”
3’ 0”
E-37
2’ 6”
2’ 8”
3’ 0”
E-31 S-10*+•
2’ 6”
2’ 8”
3’ 0”
SL-150
1’ 0”
1’ 2”
SL-160 †
1’ 0”
1’ 2”
SL-220
1’ 0”
1’ 2”
SL-230 †
1’ 0”
1’ 2”
E-44
2’ 8”
3’ 0”
2’ 8”
3’ 0”
E-34IM
2’ 8”
3’ 0”
S-90IM SL-160IM
1’ 0”
1’ 2”
SL-230IM
1’ 0”
1’ 2”
SL-282
1’ 0”
1’ 2”
† = Removable Wood Grilles * = Available in 3’ 6” x 6’ 8” & 3’ 0” x 7’ 0”+ = Available in 3’ 0” x 8’ 0” • = Available in 2’ 8” x 8’ 0”
SL-283 †
1’ 0”
1’ 2”
STEEL EDGE DOORS
= Available as a 20 Minute Fire Rated Door† = Removable Wood Grilles
STEEL EDGE DOORS
Dentil shelves available on Craftsman series doors in 3’ 0” and 2’ 8”
WOOD EDGE DOORS
10
2’-8”
3’-0”
2 Panel Square Top
2’-8”
3’-0”
2 Panel Square Top
With Element
1’-0”
1’-2”
1 PanelSDLT
With Element
2’-8”
3’-0”
2 Panel Camber Top
2’-8”
3’-0”
CRAFTSMAN 3 Panel
2’-8”
3’-0”
CRAFTSMAN1 Lite
2’-8”
3’-0”
CRAFTSMAN3 Lite
2’-8”
3’-0”
CRAFTSMAN6 Lite
1’-0”
1’-2”
CRAFTSMAN2SDLT1 Lite
1’-0”
1’-2”
CRAFTSMANSDLT2 Lite
Steel 24 Gauge Wood Edge - 5 Year WarrantyAllows you to customize hinge and lock locations
W-10
2’ 6”
2’ 8”
3’ 0”
W-30
2’ 6”
2’ 8”
3’ 0”
= Available as a 20 Minute Fire Rated Door
Door blinds are raise/lower/tilt internal blinds. Sidelites are stationary.
DIRECT SET SIDELITE INTERNAL GRIDS: WHITE, SAND.
1’ 0”
1’ 2”
ClearDirect Set
1’ 0”
1’ 2”
Internal Muntin
Direct Set
2’ 8”
3’ 0”
A-30BLE-30BL
2’ 8”
3’ 0”
S-89BLA-89BL
SL-150BLA-150BL
Tilt onlynot up and
down
1’ 0”
1’ 2”
SL-220BLA-220BL
Tilt onlynot up and
down
1’ 0”
1’ 2”
BlindsBL
MANUAL DOOR BLIND OPTIONS
®
3X3X Security. 3X Strength. 3X Reliability.
One solid unit with three latches based on the strength of patented I-Beam construction for reliable, proven performance.
The Ultimare Veneer Astragal Combines the Ultimate Astragal’s patented three- point system with the aesthetic appeal of real wood to match many interior � nishes. The veneers are complimented by bronze end caps.
MULT I - PO INT LOCK ING SYSTEM ULTIMATE FIR VERNEER ASTRAGAL
Us Patents: 5,857,291;6,941,326; 7,753,418; 8,157298; 8,157,299; 8,182,002 and US Patents Pending.
Trilennium™ Hardware Designed for the locking system, Trilennium hardware combines elegant design with precision engineering for beautiful, reli-able performance.
Operating as one, all three latches engage when the door is closed. One movement of the thumbturn or key activates all three deadbolts. When activated, each latch is a deadbolt and cannot be compromised.
Premium hardware is available in styles to match every decor. Unlike European-style systems, Trilennium operates intuitively.
A single downward turn of the interior handle releases all three deadbolts.
You can’t control the rough opening, or what happens over time. Trilennium can correct door misalignment up to 3/16”, so it works when others don’t.
PEACE OF MIND.
RELIABLE SECURITY.
EASY TO OWN.
PANIC RELEASE.
FORGIVING WHEN INSTALLED
Bronze trim caps contour the ends to provide a superior seal and complement the wood face
PATENTED THREE-POINT SEALING SYSTEM provides a seal between the astragal and the active door, inactive door, and the sill.
INCORPORATES THE ULTIMATE ASTRAGAL’S “FLOATING SEAL” that lifts with the � ush bolt when the door is opened, and creates a strong seal when the door is closed.
Available in 6/8 and 8/0 door panels.
WOOD VENEER WRAPPED FINISH Available for entire Ultimate Astragal family on both Inswing and Outswing applications.
All astragals come ready for staining or customer's choice of � nish coating.
11
For over 20 years Jamsill, Inc. has provided the construction industry with the patented Jamsill Guard® door & window sill pan flashing. With over a million sold, we feel we have the best sill pan on the market.
Available in jamb widths: • 4-9/16” for 2 x 4 walls• 6-5/8” for 2 x 6 walls• 2’ 8”, 3’ 0”, 6’ 0” doors (can be trimmed to fit openings)
4 Easy Steps to Install1. Lay the right and left sill pan ends tightly against
the rough opening.2. Check center section for proper length, if necessary
cut with a hacksaw or tin snips.
3. Liberally coat both ends of the center section and the right and left recessed areas of the end pieces with PVC cement. Position and hold for approximately one to five minutes, making sure of good bond. (Bonding time will vary depending on outside temperature).
4. Install door.
SILL PANS
12
Tested. Certi� ed. Warranted.
Protect your door system at its most vulnerable point against air and water in� ltration.
DOOR SILLS
Add security and long-lasting performance to your single & French Door units with the Trillenium Multi-Point Lock.
TRILENNIUM MULTI-POINT
LOCKING SYSTEMS
LOOK FOR THE TAG.
Force 5® Door Systems from Scherer Brothers are engineered and built to work from the ground up. Each Force 5® System – and the components within – is strenuously tested against punishing levels of water and wind, heat and cold to ensure performance. When Force 5® components are combined in the doors that you select from Scherer Brothers the result is the highest water resistance rating available … and a Warranty to back this performance.
Seal out air and water in� ltration and increase your door system performance with weathersealing.
WEATHERSEALING
The patented Simple Solution™ corner pads seals at the crucial corner preventing water from percolating up and over the threshold.
CORNER PADS
LOOK FOR THE TAG.
™
US PATENTS: 5,661,943; 5,873,209; 5,950,391; 6,122,882; AND US PATENTS PENDING
• Select Alder• Knotty Alder• Cherry
• Fir• Mahogany• Red Oak
• White Oak• Poplar• Walnut
CUSTOM JAMBS AVAILABLE IN:
Heavy DutyBall BearingWood & Fiberglass Doors
Dull Brass, Bright Brass, Satin Chrome, Antique Brass,
Oil Rubbed Bronze
Residential Ball Bearing Round/Round Used with Wood &
Fiberglass Doors
Dull Brass, Bright Brass, Satin Nickel, Antique Nickel, Antique Brass,
Oil Rubbed Bronze
Spring HingeUsed for Steel Doors
Dull Brass, Bright Brass, Satin Nickel, Antique Nickel, Antique Brass,
Oil Rubbed Bronze
Residential Ball BearingRound/Square
Used for Steel Doors
Dull Brass, Bright Brass, Satin Nickel, Antique Nickel,
Antique Brass, Oil Rubbed Bronze
HINGES AND FINISHESAll hinges are 4” size.
ALUMINUM CLAD COLORSStandard
storm door ready with Aluminum nailing flange
CLADDING OPTIONSFactory Installed Brickmoldfactory installed only - with vinyl nailing flange
Sand-stonePebble Gray
GreenBronzeStone White
WhiteTerratone
Hinges from
STANDARD HINGE AND BORE SPECIFICATIONS
6/8 DOOR HEIGHTSLAB HEIGHT 79-1/4”
6-7/16” TOP37-5/8” MID68-13/16” BOT
6/8 DOOR HEIGHT
38-3/16” DEADBOLT43-11/16” LATCH
7/0 DOOR HEIGHTSLAB HEIGHT 83-1/4”
6 -7/16” TOP39-5/8” MID72-13/16” BOT
7/0 DOOR HEIGHT
42-3/16” DEADBOLT47-11/16” LATCH
8/0 DOOR HEIGHTSLAB HEIGHT 95-1/4”
6-7/16” TOP32-9/16” MID 158-11/16” MID 284-13/16” BOT
8/0 DOOR HEIGHT
54-3/16” DEADBOLT59-11/16” LATCH
TOP OF DOOR TO TOP OF HINGE
TOP OF DOOR TO CENTER OF BORE
SILL FINISHES
Brushed Bronze Mill Nickel
13
L.H. INSWING
Interior
Exterior
R.H. INSWING
Interior
Exterior
L.H. INSWING DOUBLE DOOR
Interior
Exterior
R.H. OUTSWING DOUBLE DOORInterior
Exterior
R.H. OUTSWINGInterior
Exterior
L.H. OUTSWINGInterior
Exterior
R.H. INSWING DOUBLE DOORInterior
Exterior
L.H. OUTSWING DOUBLE DOORInterior
Exterior
DOOR ARRANGEMENTS
TECHNICAL SPECIFICATIONSClad and Wood Entry System Unit Size: Alone and With SidelitesFor RO add 1” to width and 3/4” to height.
Single w/Sidelite Single w/2 SidelitesSingle Double
Door Unit Size One 12” Two 12” One 14” Two 14”
2’ 6” Sgl 31-1/ 2” 45” 58-1/2” 47” 62-1/2”
2’ 8” Sgl 33-1/ 2” 47” 60-1/2” 49” 64-1/2”
3’ 0” Sgl 37-1/ 2” 51” 64-1/2” 53” 68-1/2”
5’ 0” Dbl 62” 75-1/2” 89” 77-1/2” 93”
5’ 4” Dbl 66” 79-1/2” 93” 81-1/2” 97”
6’ 0” Dbl 74” 87-1/2” 101” 89-1/2” 105”
Unit Height6’ 8” = 82” 7’ 0” = 86” 8’ 0” = 98”
DOOR COMBINATIONS
NOTE: Above measurements on sidelite units reflect use of continuous sills and fat boy Mull posts on units up to 6-13/16” jamb width. Units over 6-13/16”, or units using wood species other than P ine, are built frame-to-frame. Deduction in width of units is 1/8” for one sidelite, or 1/4” for two sidelites. Units can also be built with spread mulls on wood and clad units. Clad units can spread 1-1/2” only per side.
14
(For Clad Brickmold add 2-1/2” to unit width and 1-1/4” to unit height. For Wood Masonry add 2-1/2” to unit width and 1-1/4” to unit height.)
15
EXTERIOR FINISHING FOR WOOD DOORS
Stain-And-Clear FinishThe first coat should be stain/sealer, a combination of stain and sealer, which colors the door and seals the surface. It is available in a wide range of colors. The stain/sealer should have an alkyd-resin base. Under no circumstances should a lacquer-based toner or any other lacquer-based finish be used on exterior doors.
The second and third coats (two top coats minimum) may be a solvent-borne (oil-based, alkyd resin-base, polyurethane resin-base) or a water-borne (latex resin-base) clear finish.
Paint FinishEither oil-based or latex resin-base exterior grade paints may be used with success on panel doors. Oil-based paints offer more resistance to the passage of water (liquid and vapor) than latex resin-base paints, but the latter have better durability and color retention.
Doors should be sealed with a good quality oil-based primer followed by two top coats of either an oil-based or latex resin-base paint. Of course, both primer and top coat should be made by the same manufacturer and be designed to be used as a combination.
Maintenance1. In the event that the door is scratched after finishing,
the damaged area can be lightly sanded using 220-grit sandpaper (do not over-sand the surface). Follow the staining and top-coat procedures.
2. Dirt and watermarks can build up on the surface of your finished door over time. Extend the life of the stain and top-coat by cleaning the door several times a year. Clean with warm soapy water, rinse and towel dry.
3. A minimum of two coats of top-coat are initially required for complete protection. The door system should be resealed every 1 to 2 years depending upon weather exposure.
HOW TO PAINT STEEL & FIBERGLASS EXTERIOR DOORS
Steel doors should be wiped clean with a solvent such as acetone or mineral spirits. Allow the cleaning solvent to dry completely until there is no residual odor. Once wiped clean, the door must be lightly sanded with a 220-grit sandpaper. After sanding, the door must be washed with a mild detergent in warm soapy water, rinsed and then dried.
Fiberglass doors should be wiped clean with a solvent such as acetone or mineral spirits. Allow the cleaning solvent to dry completely until there is no residual odor. Next, the door must be washed with a mild detergent in warm soapy water, rinsed and then dried.
Mask (tape) off all surfaces that will not be painted including all glass.
Painting the DoorUse exterior, high quality, oil-based or 100% acrylic water-based latex paint of desired color. High quality interior paint can be used on the interior surface of the door only. Follow the manufacturer’s instructions for paint application by using a brush or a handheld sprayer.
Sealing or applying the top-coatThe top-coat for your door is very important and required for weatherability. It protects the stained door from the elements and makes the surface washable. Be sure that the stain coating is completely dry and then apply a high-quality, UV stabilized, clear exterior polyurethane coating (satin or low gloss) used for any normal exterior wood application.
Warning: Doors painted with dark colors or with attached storm doors, may become very hot to the touch in direct sunlight. Do not paint the weather strip and do not close door until paint is dry (see paint manufacturer’s specifications on minimum drying time). To maintain product warranty: Paint the door, frame, header and brickmould within 45 days of installation.
Maintenance:1. In the event that the door is scratched after finishing, the
damaged area can be lightly sanded using 220-grit sandpaper (do not over-sand the surface).
2. Dirt and watermarks can build up on the surface of your finished door over time. Extend the life of the paint by cleaning the door a few times a year. Clean with warm soapy water, rinse and towel dry.
3. Repainting every 2 to 3 years will be required, depending upon weather exposure.
Important Note:We require that all 6 surfaces (front and back faces plus all four edges) be sealed to eliminate moisture absorption. The bottom of your door pan(s) may contain a factory installed weather stripping (sweep) which is sealed prior to installation. Failure to observe this recommendation will void the warranty from most manufactures.
Annual inspection is key to a long lasting door.
Fin
ishin
g T
ips
Scherer Bros.Lumber Co.
12/2014
Scherer Bros. Lumber Co. www.schererbros.com
Arden Hills 4797 Hwy. 10 Arden Hills, MN 55112612-379-9633
Albertville 11927 53rd St. N.E. Albertville, MN 55301612-379-9633
Sales Office Only. No Showroom.
Hopkins 330 11th Ave. S. Hopkins, MN 55343952-938-2741
Shakopee 3253 E. 4th Ave. Shakopee, MN 55379612-379-9633
