Upload
tranbao
View
219
Download
1
Embed Size (px)
Citation preview
Architectural Hardware
Raising the Bar of Excellence!
™
Strength and DurabilityInnovation
SingleSourceSolutions
Profile Series
Look for the LYNX™
Introduction
www.sargentlock.comwww.assaabloydss.com
SARGENT Manufacturing Company is the leading
full line manufacturer of architectural hardware.
Products designed for the commercial, institutional
and industrial markets include locks, door closers,
exit devices, security key systems, electronic access
control systems and supplemental hardware. The
broad SARGENT product line assures finding exactly
the right style, finish, and operating precision to meet
the needs of all commercial, institutional, or industrial
projects, whether new or retrofit.
• Mortise LocksWhen it comes to strength and durability, SARGENT continues to set new standards with the new 8200 Mortise Lock. It's the strongest lock on the block! SARGENT Mortise locks offerdetention strength and ANSI/BHMA SecurityGrade 1 with all standard trims.
• Bored-in LocksAccept no substitute, there is still no equal! SARGENT's T-Zone lock continues to set the standard for cylindrical locks. SARGENT bored-in locks offer a complete line of both Grade 1 and Grade 2 lever and knob locks. A wide choice of styles, finishes, and trim available.
• Door ClosersFull line of aluminum and cast iron bodied closers,including our fully adjustable 1331 Series DoorCloser, available with a selection of arms andaccessories. All are BHMA certified ANSI A156.4Grade 1. Both surface mounted and concealedstyles are available.
• Exit DevicesSARGENT provides the best combination of simplicity, strength, durability, aesthetics and innovation in the most complete line of exitdevices in the industry! Offerings include mortise,surface and concealed vertical rods and rimdevices in mechanical and electrified functions. AllSARGENT concealed vertical rod exit devices arenow available without a bottom rod!
• Electrical Systems & ProductsA tradition of innovation and quality continues.SARGENT introduces the Profile Series Line, offering a full range of networked access controlsystems, providing simple, secure and convenientopening control based on the wide variety of SARGENT locking devices. Designed to blend with mechanical trim and hardware, integration issimple with technical support available for systemdesign, product selection and troubleshooting.
NOTES:
• This symbol appears next to SARGENTproducts that conform to ADA standards.
• N/A means function or option is not available for that series. Selected options are featured with the products shown in this book.
• Please consult catalogs for a complete list of theoptions available for each product.
ContentsProduct Support . . . . . . . . . . . . .1Quality . . . . . . . . . . . . . . . . . . . . 2Reliability . . . . . . . . . . . . . . . . . .3Innovative Products . . . . . . . .4-5Safety & Security Solutions . . . 6Key Systems & Management . .7Cylinder Systems . . . . . . . . . . . .8Electrical Access . . . . . . . . . .9-12Mortise Locks . . . . . . . . . . 13-15Bored-in Locks . . . . . . . . . .16-21Exit Devices . . . . . . . . . . . .22-25Door Closers . . . . . . . . . . . . . .26Holders & Stops . . . . . . . . . . . .27Finishes . . . . . . . . . . . . . . . . . .28Field Support . . . . . . . . . . . . . .29
“SARGENT continues to Raise the Bar of Excellence in meeting the need for higher security intoday’s society. We continue to provide true innovative solutions to address the most demandingsecurity applications through a coordinated combination of mechanical and electro-mechanicalproducts. Our commitment? To utilize our nearly 200 years of experience as an industry leaderand our state-of-the-art manufacturing technologies to provide our customers with the highestquality solutions available. Backed by the strength of ASSA ABLOY, the world’s leading lockgroup, SARGENT continues to lead the industry in quality, delivery, service and innovation.”
RICHARD HAFERSATGeneral ManagerSARGENT Manufacturing Company
For Sales, Marketing & Service Support
Phone: 800-377-3948
Address: 110 Sargent Drive
New Haven, CT 06511
Web site: www.assaabloydss.com
Email: Contact your local ASSA ABLOY Door Security
Solutions representative via e-mail by going to
assaabloydss.com and clicking on “Service & Support”.
1
Product Support
www.sargentlock.comwww.assaabloydss.com
www.sargentlock.com
Fully interactive product supportcapabilities are features ofSARGENT’s Web site!• e-mailable configurable cut sheet capability
• New easy-sort template feature
• Revolving home page spotlight highlighting SARGENT news and product launches!
• Marketing information & literature
• Easier product searches & SARGENT Advantages
• SARGENT success stories
• Complete listing of support & training
• Installation instructions - wiring diagrams
• Company information/history
• New product releases
Turboship Program
SARGENT Turbo – the most comprehensive quick ship program in the industry! Leading the industry in quick ship programs for itsmost often requested products, SARGENT offers:
• 24 hour delivery on select products
• Over 11,000 SKUs for 1 week or 3 week shipment
• McK-SARGENT program – receive hinges andhardware together
• TurboKey – up to 100 masterkeyed cylinders in 8working days
Turboship 24-Hour Express• Features over 60 complete products including
exit devices, closers, mortise locks, bored-in locks, electro-mechanical products and mullions,plus accessories
• Orders are shipped UPS within 24 hours (oneworking day) for orders received prior to 1 PM EST
McK-SARGENT Turbo 1-Week• Order any of McKINNEY’s 40 most popular hinges
and they will ship from SARGENT with the rest of the hardware order
• McK-SARGENT Turbo 1-Week orders received prior to 3 PM EST will be scheduled to ship 5 working days after receipt of order
Turboship 1-Week• Orders are shipped in 5 working days
• Features over 10,000 complete products fromalmost every line with a wide selection of functions, designs, and finishes, plus parts andaccessories
Electro Turboship 1-Week• Electro Turboship orders received prior to 3 PM
EST will be shipped in 5 working days
• Features approximately 70 electrified productsincluding keypad operated product for bored-inlocks, mortise locks and exit devices, alarmed exit devices, key switches keypads, card readers,power supplies, electromagnet, push buttons, logic controllers, solenoids, and McKINNEY electric hinges
by®
®
Contract Express• Contract Express 3-Week orders received prior to
3 PM EST will be shipped in 15 working days after receipt of order
• Contract Express 3-Week orders can be changed or cancelled 3 days after receipt of order. Changes will affect the actual shipping date
Turbo~Key• Turbo~Key orders for simple masterkeyed jobs will
be shipped in 8 working days. Turbo~Key ordersare available in SARGENT LA keyway only
2
Quality
www.sargentlock.comwww.assaabloydss.com
SARGENT presents the Studio Collection, a comprehensive line of highly stylized door levers. Metro Elements is the first series in the Studio Collection.
The Studio Collection establishes SARGENT as the only single-source company in the industry offering designer lever handles across all product lines.
These beautifully crafted lever handles offer exceptional elegance to the high-end design markets-including residential and office buildings, museums,upscale hotels and resorts, and condo-hotel projects. The initial offering for theMetro Elements consists of twenty-two levers within five categories: CentroSeries, Rialto Series, Notting Hill Series, Aventura Series and Odéon Series.
1331 & 1431 Door Closer
• Strength
– 1-1/4" diameter piston for enhanced control
– One-piece, high-strength aluminum alloy body
– 7/16” square arm engagement for enhanced torque transmission
• Flexibility– Adjustable closing force range from size 1-6
– Universal body is interchangeable for all applications (standard, top jamb & parallel)
• Convenience – All-weather hydraulic fluid operates in
temperatures as low as -40° F
– Installs in minutes
• Strength– 1-1/2" diameter piston for added control
– High performance aluminum alloy body for superior strength and wear resistance
• Flexibility– Adjustable spring power allows size range of 1-6
(select 1431 for sizes 1-4)
– Universal body is interchangeable for standard, top jamb and parallel applications
• Convenience– Valves located in front of closer body for easy
adjustment
– Installs in minutes
1331 Door Closer 1431 Door Closer
Strength
• 1" throw-hardened stainless steel deadbolt
• Exceeds over 8,000,000 cycles –over 8 times the ANSI/BHMA requirements!
• Detention level strength: 30-50 times stronger than most ANSI/BHMA Security Grade 1 commercial locks
Ease of Installation
• Reduce installation time by up to 40%
• Pictorial instruction sheets
Functionality
• Seamless retrofit
• 9 functions accomplished with one lockbody, making it easier to change functions in the field
• 58 Standard functions including 4 electrical functions and 4 keypad functions
The 8200 Mortise Lock – The Strongest Lock on the Block!
MN
MO
MI
MG
MF
ME
MB
MA
MT
MM
MC
MD
MJ
MP
Odéon Series
Centro Series Rialto SeriesAventura Series
Notting Hill Series
Studio Collection - High-performance hardware. A choice of stylish levers. Conveniently from one source.
MQ
MR
ML
MK
MS
MH
MU
MV
3
Reliability
www.sargentlock.comwww.assaabloydss.com
T-Zone
The T-Zone lock features true interlocking
construction of the stainless steel lockbody and
latchbolt forming a rugged, torque-resistant "T" in
the critical twist area.
Setting a higher standard for Grade 1, the T-Zone
exceeds ANSI/ BHMA A156.2 Grade 1 cycle
requirements by 10 times! Conclusive independent
testing showed no signs of lever sag – even after 8
million cycles.
Accept no substitute. There is still no equal!
– Solid cast levers
– Cast/machined stainless steel lockbody
– Small 2-3/4" diameter rose
– True classroom security function available
– Withstands over 3000 in/lbs of ANSI/ BHMA
Grade 1 torque force without entry
– 10 Year warranty
Windstorm codes have been implemented
throughout the country in recent years to protect
buildings and the occupants inside from the
destructive forces of hurricanes and other powerful
storms. The intent of the windstorm codes is to
prevent pressure fluctuations and wind-driven debris
from infiltrating the building exterior. If a single
structural component of the building envelope is
compromised, destructive hurricane winds can enter,
creating an internal pressure change that can literally
blow the roof off a structure. Door hardware is one of
the critical components that must remain intact for a
building to survive. The codes now in place set
minimum standards that must be met to ensure door
hardware can withstand destructive hurricane force
winds and debris impacts.
SARGENT products are tested to meet Dade County
Protocols and other local code requirements for high
wind load and missile impact. Products include
Concealed Vertical Rod, Rim and Mortise Lock exit
devices, as well as, Mortise and Cylindrical Locks.
SARGENT’s T-Zone Lock sets new industry standards in strength and durability!
Simplicity
• Easy installation
• Maintenance free design
• Few moving parts – less wear
• Modular construction
• No need to remove device from door for keying
Strength and Durability
• Made of finest component materials
• Heavy duty mounting construction
• Built to withstand abusive conditions
• Available options to meet Dade County Protocols and other local hurricane code requirements for high wind load and missile impact (consult factory)
• 5 year warranty
Aesthetics
• Clean, simple, aesthetically pleasing design
• “True” architectural hardware finishes consistent with BHMA/ANSI standards
• Coastal Series decorative lever trim available
Innovation
• SARGuard™ antimicrobial finish coating offers a new level of protection
• SARGuide™ electroluminescent exit signage guides users directly to the means of egress in low visibility conditions
• Broad offering of electromechanical solutions for the most demanding access/egress control applications
• CTL (Center and Top Latching) vertical rod devices offer less bottom rod convenience with true center latching for added security
• NB8700 (surface vertical rod device less bottom rod) solution for those cross corridor doors in hospitals, schools, and nursing homes
SARGENT 80 Series Exit Devices
Windstorm Products
4
Innovations
www.sargentlock.comwww.assaabloydss.com
SARGuide,™ with integrated electroluminescent EXIT
signage, addresses the increasing concern about safe public egress,
particularly in low-visibility conditions.
SARGuide provides optimum visibility by illuminating the exit
device or mortise lock. The blue-green light is three to five times
more visible than any other light source, making the escape route
easily identifiable in all situations, from bright lighting to complete
darkness, including smoky conditions. SARGuide dramatically
improves the safety of any public building.
ElectroLynx™ – Hardwiring made easy™
SARGENT introduces ElectroLynx, a plug-in connector system that allows
installers to quickly and easily connect SARGENT electromechanical locks
with CECO and Graham doors & frames, McKINNEY hinges and other
ASSA ABLOY products.
Make the perfect connection every time with SARGENT’s ElectroLynx. The
plug-in universal connectors and our easy, color-coded wire system
eliminate matching wires. Wiring is a snap and completely fool-proof.
This pre-wired opening system - standard on most SARGENT
electromechanical products - features Molex® connectors
that snap together, attaching the door, hinge and lock to
the building’s power source. Whether you use the system
now, or plan to upgrade in the future, changing the
components is as easy as plugging a phone into a wall jack.
Look for the LYNX. The NEW standard in door wiring!
ElectroLynx™ The New Standard in Door Wiring
SARGuide™ EL & PL - The latest innovation in Life Safety!
SARGENT Systems
Need A Professional Wiring Diagram On Time, Every Time? “Plug” Into Our SARGENT Electromechanical Team!- Explore the wiring diagram section of our website (www.sargentlock.com)
to discover our current offering!
- Diagrams currently available online: Some in each of the sample system
categories [authorized entry (AE), authorized exit (AX), authorized entry &
exit (AEX) and door control (DC)] with many more to be added!
Our online wiring diagrams don’t meet your specific need?
- Go to www.sargentlock.com/products/em_systems/product_group.php.
Wiring diagrams are delivered within 10 business days.
Consult the Electromechanical Technical Services Team at 800-810-WIRE to
establish the type & number of wiring diagrams required for your project. Visit
www.sargentlock.com or fax the team at 203-603-5981.
Photoluminescent technology, ideal for retrofit situations and areas with high
ambient lighting, utilizes a "glow-in-the-dark" coating. Ambient lighting is
absorbed by the PL material and is emitted when light sources are diminished or
eliminated. Join us as we continue to raise the bar of excellence!
5
Innovations
www.sargentlock.comwww.assaabloydss.com
SARGuard™
PatentPending
™
The AgION antimicrobial is not intended as a substitute for goodhygiene. Coated products must still be cleaned to insure the sur-faces will be free of destructive microbes. SARGENT makes norepresentations or warranties, express or implied, as to the effica-cy of the AgION antimicrobial. A copy of the AgION warranty isavailable upon request.
EPA registered, FDA recognized, NSF certified, and a trademarkof AgION Technologies, LLC.
• SARGuard - This revolutionary finish coating, available on all SARGENT product lines, utilizes a silver-based anti-microbial compound from AgION Technologies
• Kills Microbes: The SARGuard coating permanently suppresses the growth of algae, fungus, mold, mildew and is effective against a broad spectrum of bacteria
• Long Lasting: As an integral part of the finish coating, SARGuard lasts for the life of the hardware.
• Safe: Non-toxic and completely safe. The AgION antimicrobial compound is EPA and NSF approved and FDA Listed for use in medical and food preparation equipment.
• Perfect Applications: Hospitals, laboratories, schools, medical/ daycare/food processing/research facilities, pharmaceutical companies, etc.
SARGuard™ Helps You Protect Two Ways! Physical building security to Control Access! Silver Solutions to Control Bacteria!
Keso F1
• Offers the highest level of key control available onthe market today!
• Full control over field duplication of keys
• Highly pick-resistant cylinders
• Expanded levels of master keying
• Reintroduces patent protection to an existing Keso system
• Provides customers with a cost effective way to bring security back into existing Keso key systems
• Keso F1 offers over 100,000 usable combinations to accommodate the most complex master keyingsystems
• New version Keso F1 keys operate in existing old style Keso cylinders. Old version Keso keys do notoperate the new Keso F1 cylinders.
• Each Keso F1 key system has its own unique combination of pin lengths and positions. Eliminates the possibility that one Keso F1 key system can duplicate another.
Keso F1 - Adds a stronger building block to the SARGENT Key Control Pyramid!
SARGENT 10 Line Scores a Perfect 10
SARGENT’s 10 Line design surpasses all competitive
products in strength and durability.
The unique lock design exceeds Grade 1 requirements.
At over 4,000,000 cycles, the 10 Line beats the
closest competitor by 30%. As for abusive force, this
lock endures more than two times the standard
without allowing entry!
If you’re looking for flexibility, the 10 Line offers
twenty-two different functions and six different lever
designs, including Coastal Series.
The through bolt positions are adaptable to fit almost
any door preparation. Best of all, the lock can be
installed in one minute or less, making installation as
easy as 1-2-3!
• Installs in less than one minute
• Exceeds Grade 1 Standards
• Thousands of functions, finish and design combinations for virtually any application
• Multiple through bolt positions adapt to anydoor prep
• Manufactured with pride in New Haven, CT
• Seven year warranty
• Twenty-two different functions and six lever designs available (including decorative Coastal Series)
Exceeding Standards – Time After Time
6
Safety and Security Solutions
www.sargentlock.comwww.assaabloydss.com
Access Control on Demand! Profile Series v.G1 and 4293 Stand Alone Wall Prox
The Profile Series stand-alone access control products
provide the user with a broad selection of technologies,
features and mechanical locking devices housed in a sleek,
architecturally desirable design.
SARGENT's NEW 4293 Stand-alone Prox reader offers all
of the expanded capabilities of our Profile Series v.G1
hardware in a self-contained hard-wired reader. The 4293
Wall Prox can be programmed and managed from a
Personal Computer using Softlink Plus v.4 software. It is
programmable via infra-red communications using a PDA,
or can be programmed manually using the keypad on the
unit. The unit can be used to control locking devices on
single or paired door openings.
This unit is self-contained and includes HID technology, a
keypad and controller. The Prox unit antenna can be
remotely mounted up to 10 feet away from
keypad/controller.
• Expanded users and audits: 2,000 Users and 2,000 audits
• RF Technology offers the user the ability to remotely control the lock by means of a hand-held transmitter (RF Fob)
• Weather-resistant electronics for enhanced reliability
• Complete security. Locking function integrated within the lock, not in the trim
• Full range of applications including Grade 1 Mortise and Bored-in Locks and Exit Devices
• Easy to retrofit existing mechanical and push-button mechanical lock door preps
• SofLink Plus™ w/ SofLink PDP™ Access Control Management software allows simple programming and interrogation using PDA (wireless) data transfer
Enhanced Security and Convenience!
4293
The BioFob™ Security Device is the first handheld,
wireless, biometric fob providing both physical and
logical access. This self-contained unit captures,
processes, stores, and verifies the authorized user's
fingerprint to activate RFID and Bluetooth signals.
These signals unlock SARGENT's Profile Series
Locks, existing HID or Indala readers and encrypted
computer systems. BioFob is the perfect biometric
solution for your existing security system.
BioFob
Key Features• All fingerprint capture, processing, storing and
verification is done on the BioFob
• No centralized biometric database required, solving many privacy concerns
• Designed to meet RPS 140-2 Level 2 security requirements
BioFobTM - Wireless Biometric Security!
The v.N1 offers the ability to manage a wide range of
locksets using existing Wiegand Access Control
Systems. Monitoring options are built into the lock
that easily integrates to your system with a simple
panel interface board and no additional software.
The Profile Series v.N1 combines the finest Grade 1
hardware with keypad proximity readers.
Expanding your system in the future? Simply add
v.N1 locksets and plug them into the panel interface!
Simple and cost effective access control.
Profile Series v.N1
Key Features• Wiegand open architecture
• Door status monitoring
• Easily adaptable
• Fully integrated
Profile Series v.N1 - Wiegand™ Compatible Access Control
7
Security Key Systems &Key Management
www.sargentlock.comwww.assaabloydss.com
SARGENT ASSA V-10™ SecurityCylinderThe patented UL437 key combined with exclusive
keyways provide maximum security, key control and
flexibility at the facility user lever. Retrofits into most
commercial hardware and is field serviceable.
Keso-F1™ Series Security KeySystemA patented cylinder and key with 3 banks of pins is
extremely pick-resistant and allows for multiple
levels of masterkeying with no loss of security. While
maintaining the 3 banks of pins, the Keso-F1
product adds an additional dimension of dimpling to
the key blank offering a greater range of both change
and master key combinations to greatly expand its
master keying capabilities to both new and existing
Keso security key systems end users.
Signature™ Series Security KeySystemGreater security and convenient patented key control
are the main benefits of the Signature Series. The
patented key design provides additional control over
unauthorized key duplication, and unique end-user
assigned code patterns allows the facility extra
control over their key system.
XC Series SystemGain the extra key control of a patented key and
cylinder mechanism plus greater security without the
need to change your existing key system.
Compatible with most existing SARGENT key sys-
tems, XC keys will operate existing non-XC cylinders
providing the means for enhancing the level of con-
trol in an existing masterkey system. Key control is
further increased, as XC blanks are only available
through authorized SARGENT distributors, limiting
unauthorized duplication.
Removable Core SystemsThe 6300 Series provides a system of removable
and construction core cylinders that allow for quick
keying changes without having to remove the lock
from the door or disassemble the knob or lever.
Increased key control and flexibility result as the
cores are readily interchangeable among all
SARGENT lock families allowing for fast keying changes.
Small Format Interchangeable Core(SFIC) SystemsThe 7300 B Series is similar to the SARGENT 6300
Series as that it provides a system of interchangeable
and construction cores that allow for quick keying
change but in a smaller universal format. This
smaller format is available in the new SARGENT 4A
and 4B keyways and with most popular competitive
keyways.
SARGENT Helps You Take Control!Absolute ControlPatented keys in exclusive keyways are virtually
impossible to duplicate. Cylinders provide maximum
pick and drill resistance (UL437). Cylinders and keys
are available only through authorized SARGENT
distributors.
Extra ControlPatented key design provides additional resistance
to duplication. Cylinders are pick-resistant.
Drill-resistant features are also available as an option
(UL437). Cylinders and keys are available only
through authorized SARGENT distributors.
Intermediate ControlUnique key design and cylinder construction resists
unauthorized duplication and entry.
Limited ControlMinimal key control is dependent upon the key
management system.
Absolute Control
Extra Control
IntermediateControl
LimitedControl
Key Systems
Developed for locksmiths and facility managers to
provide detailed key and hardware management
information for single or multiple key systems.
Software provides tracking of keys, key bearers, key
holder locations and door hardware information. The
program features easy-to-navigate screens using a
format similar to Microsoft® Outlook™.
KeyWizard™– A Software Package that takes the Mystery out of Key Management!
By
8
Cylinder Systems
www.sargentlock.comwww.assaabloydss.com
Absolute ControlSARGENT ASSA V-10™Patented key design and exclusive end-user keyways offer maximum protection against unauthorized key duplication and the
highest level of control currently available. V-10 cylinders meet UL437 standards for pick and drill resistance. Cylinders incorporate
a dual locking mechanism with coded side bar and specially designed stainless steel pins to thwart picking attempts. Rim, mortise
and cylindrical lock cylinders are available to retrofit most popular brands of commercial hardware and are field serviceable.
Patented Key Control. Available in removable core.
Keso F1 UL437Keso F1 provides a maximum level of control with a unique six-sided key design. Keso F1 UL437 cylinders meet UL437 standards
for pick and drill resistance. The dimpled key requires sophisticated key-cutting equipment. The unusual cylinder with 3 banks of
pins is extremely pick-resistant and allows for multiple levels of masterkeying with no loss of security. While maintaining the 3
banks of pins, the Keso F1 product adds an additional dimpling dimension to the key blank offering a greater range of both change
and master key combinations. This greatly expands its master keying capabilities to both new and existing end users. The Keso F1
is backward compatible to the original Keso Systems.
Patented Key Control.
Extra ControlKeso F1Keso F1 offers existing Keso users the opportunity to regain the security of patent protection for their locking systems. This system
offers all the same features as the Keso F1 UL437 version without the additional pick and drill resistant features. It is perfect for
doors where physical attack is not as critical.
Patented Key Control. Available in removable core.
Signature and Signature UL437Extra security, exclusive end-user pattern and patented key control are the main benefits of the Signature Series. The patented key
design provides additional control over unauthorized key duplication, while the cylinder’s unique design resists attempts at
manipulation. The Signature feature is offered in the majority of SARGENT keyways to provide a perfect solution to upgrading the
level of control in an existing masterkey system. Signature cylinders that retrofit into almost any SARGENT lockset, as well as most
commercially available brands of mortise locks and exit devices, are field serviceable.
Patented Key Control. Available in removable core. Optional UL437 Series offers drill-resistant features.
Intermediate ControlKeso & Keso UL437SARGENT recommends the new Keso F1, but SARGENT will continue to support original Keso systems.
XC SeriesThe SARGENT XC Series is a patented product incorporating a side pin mechanism working in conjunction with a specially milled
key. Available only through authorized SARGENT distributors, XC provides an intermediate level of key control by ensuring that
keyblanks are not readily available in the market. Offered in many of SARGENT’s standard keyways, XC is readily integrated as a
cost effective means of achieving higher security key control in an existing key system.
Patented Key Control. Available in Small Format Interchangeable Core.
Limited ControlConventionalCylinders and keys provide a standard level of control in a full range of keyways. Geographically restricted key sections are
available.
6300 Series Removable Core
The 6300 Series Removable core cylinders and construction cores allow quick keying changes without having to remove the lock
from the door or disassembling the knob or lever. Core cylinders are interchangeable with all SARGENT mortise locks, exit devices,
cylindrical locks, padlocks and auxiliary locks.
7300 Series Interchangeable Core
SARGENT’s version of Arrow, BEST and Falcon* type interchangeable core is offered in two new SARGENT keyways and BEST
keyways. These cores are available in many BEST keyways and two SARGENT 7-pin keyways.
*Arrow, Best and Falcon are registered trademarks.
Intermediate Control
Limited Control
Absolute Control
Extra Control
www.sargentlock.comwww.assaabloydss.com
9
The Profile Series stand-alone access control products provide the user with a broad selection of
technologies, features and mechanical locking devices housed in a sleek, architecturally desirable design.
From the basic LK Series to the fully featured G1-TP Series, programmed via PDA data transfer, all units utilize
a battery powered microprocessor based controller with non-volatile memory to preserve user coding. All
technology features are supported by the physical security of a SARGENT ANSI/BHMA Grade 1 mechanical
locking device: mortise, bored-in or exit. These locking devices allow for electronic control over the optimum
mechanical lock and are UL Listed for use on fire doors. Trims and finishes are identical among the various
technology offerings (G1-LU, G1-PA, G1-PK, G1-TU, G1-TA, G1-TP) to be combined in a cost effective
continuity of design.
• Profile Series kits available to upgrade SARGENT 80 Series Rim and Mortise Exit Device
• RF Technology – G1-TU, G1-TP and G1-TA
• Directly supports HID Bit Formats: 26, 33, 34 and 35 (Corporate 1000)
Access Control on Demand! Profile Series v.G1 and 4293 Stand Alone Wall Prox
Bored-in Lock Mortise Lock
Exit Device
Proximity Card
Fob
MicroProx Tag
LK SeriesBasic, stand alone operation for up to 100 users programmed via lock keypad. Typical applications include restrooms,
closets, storage areas and utility rooms.
G1-LU SeriesAdvanced access features with keypad only operation at the lock. 2,000 user codes with a transaction history of the
last 2,000 events. The G1-LU is well suited for dormitories, assisted living facilities, apartments and office buildings. RF
Technology (see RF Fob) to provide remote operation of the Profile Series Lock, reference G1-TU.
G1-PA SeriesAdvanced features of the G1-LU with the security of only a proximity reader at the lock. The user operates the lock by
using an HID proximity credential such as a card, fob or MicroProx tag. Facilities like hospitals, universities and
research laboratories all benefit from the increased security of no programming capability at the lock. RF Technology
(see RF Fob) to provide remote operation of the Profile Series Lock, reference G1-TA.
G1-PK SeriesThe PK Series offers all the control features of the other levels for the highest security and flexibility. Openings can be
programmed to require a keypad code and/or proximity credential. Openings that require the highest security and
traceability are ideal for the G1-PK: drug storage rooms, evidence rooms or telecommunication substations. RF
Technology (see RF Fob) to provide remote operation of the Profile Series Lock, reference G1-TP.
SofLink™ Plus User Management SoftwareTo enhance the flexibility and ease of managing a facility system of Profile Series locks, SofLink Plus™ provides the
means to organize, control and customize access levels from your computer.
SofLink Plus w/ SofLink PDP Features:• 10,000 user name database • User name import function from database
• Auto unlock with or without “first-in” authorization • Holidays (16 single days; 16 blocked)
• Access level oriented format • Directly supports HID 26, 33, 34 and 35 Bit formats
Access Level Features
RF Fob
4293Wall Prox
SofLink Plus™ CD
Bored In Locks
Exit Devices
G SeriesVersion 4.2
Version 3.0
Mortise Locks
4293 Wall Prox
Effective3/05
Electrical Access &Egress Control Products
Profile Series v.N1 - Wiegand Compatible Access Control The v.N1 offers the ability to manage a wide range of locksets
using existing Wiegand Access Control Systems. Monitoring
options are built into the lock that easily integrates to your system
with a simple panel interface board and no additional software.
The Profile Series v.N1 combines the finest Grade 1 hardware with
keypad proximity readers.
Expanding your system in the future is easy! Simple add v.N1
locksets and plug them into the panel interface board!
• Open Architecture Platform• Incorporates mechanical door hardware
into existing access control platforms• Easy installation, easily retrofits to your
existing buildings• Manages the intelligence of your opening• Full range of applications: exit devices, mortise
and cylindrical lock platforms available to address any opening requirements
• Choice of any SARGENT ADA lever designs,including decorative Coastal Series
• Ideal for corporate campuses and healthcare facilities
10
Electrical Access &Egress Control Products
www.sargentlock.comwww.assaabloydss.com
Access Control Products RF TechnologyRF technology offers stand-alone access control enhancement allowing the user to remotely control the lock by means of a hand-held transmitter (RF Fob).
The Profile lock is easily programmed for three primary RF actuation modes: Passage, Standard or Panic. RF Technology is an additional means of operating the
lock by direct keypad code entry or proximity credential presentation.
Primary modes of RF Technology
Passage: Remotely toggle (lock/unlock) the unit which
remains locked/unlocked until the RF Fob is pressed
again. Convenient applications: To unlock doors for
extended periods of time; employee entrances, office
suites, etc.
Unlock/Relock: Remotely unlock for a defined period
of time: (1 to 99 seconds) and then automatically
relock at the end of that time period. Typical
applications: Security entrances, guard stations,
anywhere an electric strike is not feasible and/or an
audit trail is desired.
Panic: An RF Fob set as a “Panic User” can be used
to quickly and easily remotely lock entry doors during
emergency situations to prevent entry by intruders.
Remains locked until reset by Master or Emergency
code.
• Available in keypad (TU), keypad /proximity (TP) and proximity only (TA) models
• UL and cUL Listed for fire doors
• Typical operating distance of 35 to 75 feet on inside of door; 10 to 25 feet on outside of door
• Ideal for retrofit applications: Minimal door prep with no frame prep, wiring or power supply needed
• Multiple RF Fobs may be programmed into a single lock
• LED indicator on inside escutcheon shows when RF lock is actuated
• Bored-in, mortise lock and exit device versions
• All Profile Series v.G1 finishes and levers, including Coastal Series available
• Supported by SofLink Plus™ w/ SofLink PDP™ application software
• All user types, features and prefixes for Profile Series v.G1 supported
ActuationIndicator
NOTE: RF Fob sold separately
Bored-inShown
Outside Escutcheon Inside Escutcheon
52-2551 RF Fob
To Order
Specify the desired technology:
TU 2000 Users w/ Keypad and RF Technology
TP 2000 Users w/ Keypad, Proximity and RF Technology
TA 2000 Users w/ Proximity and RF Technology
KP Series –Keypad Operated LocksThe KP Series Keypad locks are designed for areas that require stand alone, basic
authorized entry capabilities. They are battery powered, motor driven, self-contained locks
that use microprocessor based controllers with non-volatile memory. All programming is
done through the keypad at the door and can support up to 100 users. Lock operation is
programmed by the user according to opening needs, such as momentary unlocking,
passage or other available modes.
Supported by the physical security of a SARGENT ANSI Grade 1 mechanical locking
mechanism, (bored-in, mortise or exit device), this lock provides the security and
functionality needed to control access to store rooms, offices, stairwells, conference rooms
and restrooms. With the cylinder override feature, the keypad lock can be readily
integrated into an existing masterkeying system.
Lever trim and finishes are the same as those used with the Profile Series and with
standard SARGENT mechanical locks, providing for continuity of design and look
throughout the building.
Rim Exit Device Mortise LockBored-in Lock
11
Electrical Access &Egress Control Products
www.sargentlock.comwww.assaabloydss.com
Controlled Strength: Electromechanical Locks
ElectroLynx™ Hard Wiring Made Easy™
Fire Guard Closers/Holders
Low Energy Door Operator
Electromagnetic Door Holders
- Solenoid operated locks designed for simple, stand alone applications
- Readily integrated into sophisticated, building wide, access control systems
- All meet ANSI Grade 1 and UL Listed for use on fire doors
- Solenoids used are designed for intermittent and continuous duty operation,
allowing for Fail Safe and Fail Secure operation
- Available in:
- SARGENT 8 and 10 Line locks for medium use security openings
- ADA compliant 10 Line levers are suitable for bringing a building into code compliance.
Applications include meeting rooms, waiting rooms, lobbies, offices, entrances and corridor doors
- SARGENT 7800/8200 mortise locks step up to higher traffic, more secure applications
- Fire Guard Series allows for single or multiple openings to be controlled by local, independent
smoke detectors or tied into the building’s central alarm system
- Doors such as cross corridor or interconnecting can be left open for free transit but will
automatically close in an emergency, preventing the spread of smoke or fire
- Available with UL Listed smoke detector or configured for direct integration into building’s fire
protection system for pull, push and pull side double egress opening configurations
- 2408 Single point hold open units adjustable from 85 to 110 degrees typically used on stairwell,
corridor and other openings intended to be normally fully open
- 2900 Multi-position hold open units are adjustable from 10 to 170 degrees with optional adjustable
initial hold open point or swing-free features
- 1560 Series electromagnetic door holders are Fail Safe devices designed to hold self-closing smoke and
fire barrier doors open until released by a fire protection or other control system
- Fire codes allow for interconnecting, cross corridor and stairwell doors to be held open if they interfere with normal
operation provided they can be automatically closed in an emergency or power outage
- Available in wall and floor mount designs
- MPower 4000 Series door operators meet the need for barrier-free door control, satisfying the demands
of most architectural barrier code requirements
- Units provide powered opening with hydraulic closing, solving the problems of heavy doors or high draft conditions
- Fully complies with ADA and ANSI A156.19 requirements and low energy operator ADA accessibility guideline requirements
10 Line
8200 Series
2408 Series
1560 Series
4000 Series
351 EHT
2900 Series
Make the perfect connection every time with SARGENT's ElectroLynx. Wiring is a snap and completely fool-proof.
- Installation friendly “plug-n-play” system for most SARGENT electromechanical products
- Universal Molex™ plugs provide an easy intuitive electrical connection
- Standardized wire colors, raceway cables and connectors
- Ease of installation with minimal wiring
12
Electrical Access &Egress Control Products
www.sargentlock.comwww.assaabloydss.com
Control at a Distance: Electrified Exit Devices
Activation Devices
Electromagnets
Alarmed Exit Hardware
- Controlled authorized entry, exit, access contro
- Available in a variety of functions that allow for the monitoring and remote unlocking of the exit
- Capabilities include simple signaling of rail depression, remote locking/unlocking,
delaying egress for a defined time, and combinations for custom control of the opening
Features include:
• 55- Signal switch
• 56- Remote latch retraction
• 57- Delayed egress using an electromagnet
• 58- Electric dogging
• 59- Electroguard, delayed egress
- User can select when and how electromechanical locks operate
- Key switches allow effective integration into the building’s masterkey system
- Cardreaders interact with building's security system
- Push pads, RF transmitters and wall switches offer handicapped control access over door operators
- Remote monitoring consoles provide control and monitoring over multiple zones and work with multiple electromechanical
products and accessories
- Designed to signal violation when an opening is used for unauthorized exit or passage
- Alarms are battery powered and continue to indicate a violation even after alarm horn has timed out
- Inside and outside cylinders along with actuation delay allow for authorized passage
- Products Include:
• The 540/550 Series provides alarm indication with no locking function
- Commonly used on openings that have existing locking mechanisms
- Well suited for retrofit situations where alarming the opening is needed
• SARGENT's AL-80 Series Exit Devices with integrated alarm in push rail
- Designed for areas requiring stand-alone alarm on outward swinging doors
- Redesigned features include: LED status indicator, newly designed horn - 25% louder, increased resistance to
electrostatic discharge and new 546 wiring harness.
- Well-suited for use on rear exterior doors, doors leading to a rooftop, or anywhere security is a concern
- 1580 Series electromagnets are best suited for applications where additional locking strength or the delay of egress
through an exit device is required
- Fail Safe devices are frequently used as the locking means for a Delayed Egress System at emergency exits to delay
egress through an opening for a predetermined time, while still allowing free egress in a true emergency
- Also ideal for an entry door into offices or waiting rooms where people are “buzzed in” but free egress is maintained
56-80 Series (depicted without cover plateto show internal electronic components)
4292Keypad
4296HWall Switch
AL-80 Series Exit Device
4414-4 ZoneMonitoring Console
To ensure the optimum performance and life of SARGENT electromechanical products and systems, a line of fully regulated
and filtered power supplies is available for complete system compatibility. All supplies are UL Listed and versions with
battery backup are available.
1580 Series
3530
Power Supplies
4370 Series
775/776 ET Trim
13
Mortise Locks:Features
www.sargentlock.comwww.assaabloydss.com
7800 Knob Line
8200 Lever Line
9200 High Security Line
Extra strong 7/64" (3mm) steel casefor improved impact resistance
6-pin solid brass cylinder standard; multiple keying systems available
Solid brass, bronze,stainless steel levers.ADA compliant.Full latch retractionat 30° for ease ofoperation
Heavy duty hubs and spring cartridgefor superior strength and cycle life.
Outside front plate 1/16" (1.6mm)brass, bronze or stainless steel.Adjustable for door bevels fromflat to 1/8" (3mm) in 2" (51mm)
3/4" (19mm) projectionstainless steel one-piecelatch, reversible withoutopening case. Anti-frictionpiece for quiet operationand prevents scratchingof strike plate
All trim designsthrough-bolted.Spring load spindlesautomatically adjustfor door thickness
Inside front1/8" (3mm)steel (fulllength). One-piecedesign tohold locksecurely indoor
Heavy gauge corrosion resistantparts provide security, reliability,durability and longevity
8237 LNL Shown
Cylinder retainer two prong gripSecurity Grade 1
SARGuide™
SARGuide,™ with integrated electroluminescent EXIT signage,
addresses the increasing concern about safe public egress,
particularly in low-visibility conditions.
SARGuide provides optimum visibility by illuminating the mortise
lock. The blue-green light is three to five times more visible than
any other light source, making the escape route easily identifi-
able in all situations.
When quick egress is critical, SARGuide guides the way
to safety.
- Non-handed
- Lamp can be used on internal trim (for external trim, consult factory)
- Includes all features of the NEW 8200 Mortise Lock
- Available with WT escutcheon and all standard lever designs,see 8200 Mortise Catalog for details
TRIAD™ 3 Point LockBuilt on SARGENT’s 8200 mortise lock family with the strength of a Grade 1 mortise lock plus a deadbolt and 2 hookbolts, the
TRIAD supplies 3 point locking where the greatest security is needed – such as apartment buildings, private offices and medical
storage rooms – without the need to install separate auxiliary locks.
• Lever trims conform to ADA
• Available with Coastal Series trim designs
• Accepts full line of SARGENT cylinder systems, easily integrated into existing masterkeyed systems
• U.S. Patent No. 5,678,870
3P-8225 Triad
Ease of Installation
• Installation time reduced by up to 40%!
• Pictorial instruction sheet
Detention Level Strength
• Cycle test exceeds 8 million cycles!
• 5 Post Lock case assembly
• Hardened latchbolt rod
Functionality
• 58 Standard functions including 4 electrical functions and 4 keypad functions
• 9 functions available in 1 lockbody
The Revolutionary 8200 Mortise Lock! The strongest lock on the block!
Non-handed stainlesssteel deadlatch
14
Mortise Locks:Trim Designs
www.sargentlock.comwww.assaabloydss.com
NOTES: Not all trim designs are pictured here. Consult mortise lock catalog for additional selections and trim dimensions. Screwless knobs available.All Coastal Series levers are available with roses or escutcheons.
3-1/2" (89mm) diameter L Rose complements
7800 and 8200 mortise lock lines and matches
8 Line, 10 Line, and T-Zone rose designs.
Available with all lever designs
Freewheeling trim lever
handle swings freely up to
70° in “locked” mode.
8200 Lever Line and 9200 High Security Line
WTNKE1B
7800 Knob Line
A Lever J Lever
LE1L
B Lever
L Lever
LS Security Trim
E LeverP Lever
LWLJ
F Lever W Lever
WTL FREEWHEELING FEB (B lever shown)
OB
KSK KW1B
LE3B
Concealedcylinder
8200 Coastal Series™
Decorative Levers withRoses and Escutcheons
Sanibel™
Coronado™
Rockport™
Yarmouth™
Gulfport™
PT3 Mounting
positions standard
Gulfport™
Detention knob
• Rose: LN-Heavy wrought
LN Rose Design
E Rose DesignO Rose Design
L Rose Design
CR TR
Sanibel™
15
Mortise Locks:Functions
www.sargentlock.comwww.assaabloydss.com
* Available with 8200 freewheeling trim functions. • Available with 7800 push/pull trim.
Entrance or Office (05) Latch operated by lever from either side except when outside lever is locked 05*by thumb turn. When outside lever is locked, latch is retracted by key from outside or by operating inside lever. Auxiliary dead latch.
Passage (15) Latch operated by lever from either side at all times. 15•
Store or Storeroom (26) Latch operated by lever from either side. 26*•Deadbolt operated by key from either side.Note: Use only on rooms with more than one exit.
Classroom or Hospital (37) Latch operated by lever from either side except when outside lever or knob 37*•is locked from outside by key. When outside lever is locked, latch is retracted by key or by operatinginside lever. Auxiliary dead latch.
Classroom Security Lock (38) Latch operated by lever from either side except when outside lever is 38*locked from inside or outside by key. When outside lever is locked, latch is retracted by key from inside oroutside or by operating inside lever. Auxiliary dead latch.
Classroom Security Deadbolt Lock (41) Latch operated by lever from either side except when outside 41lever is locked from inside or outside by key. Deadbolt retracted by key from inside or outside. Operatinginside lever retracts both bolts. Key retraction of latch unlocks outside lever. Auxiliary dead latch.
Apartment Corridor (43) Latch operated by lever from either side, except when outside lever is 43•locked by toggle or projecting deadbolt. Deadbolt operated by key outside or turn inside. Key outside operates both bolts. Operating inside lever retracts both bolts and outside lever remains locked. When deadbolt is retracted, lever outside is unlocked by toggle. Auxiliary dead latch.
Hotel/Motel (50) O/S trim rigid at all times. Latch retracted by guest key or masterkey O/S, except 50•when deadbolt is projected by turn lever I/S. Emergency key operates latch and deadbolt at all times. Inside lever always retracts latch and deadbolt. Deadlocking latch.
Privacy, Bedroom or Bathroom (65) Latch operated by lever from either side except when outside lever 65*•is locked by thumb turn. Operating inside lever, closing door or operating outside emergency release unlocks outside lever.
Electrical Fail Safe (70) Latch operated by lever from either side, except when outside lever is locked 70electrically. When outside is locked, latch is retracted by key from outside. Power off unlocks outside lever.Inside lever always retracts latch. Auxiliary dead latch.
Electrical Fail Secure (71) Latch operated by lever from either side, except when outside lever is locked 71electrically. When outside is locked, latch is retracted by key from outside. Power off locks outside lever.Inside lever always retracts latch. Auxiliary dead latch.
Electrical Fail Safe (72) Latch operated by lever from either side, except when both sides locked 72electrically. When levers are locked, latch is retracted by key from either side. Power off unlocks insideand outside. Auxiliary dead latch.
Electrical Fail Secure (73) Latch operated by lever from either side, except when both sides locked 73electrically. When levers are locked, latch is retracted by key from either side. Power off locks inside andoutside. Auxiliary dead latch.
8200 Line & 9200Location/Description Function High Security Line 7800 Line
F01F01
F32
F05
F14
F04
F05
This chart lists common functions and their variations within each of the lock lines. Shaded knobs or levers indicate that they are rigid at all times. ANSI function numbers (prefix F) are shown where applicable.
A total of 58 functions are available. Additional information can be found in the mortise lock section of the SARGENT catalog or at www.sargentlock.com.
F04
F32
F14
F15(modified)
F15(modified)
F20 F20
F22 F22
Certifications and Listings8200 & 7800 SeriesHeavy duty, BHMA certified under ANSI A156.13 Series 1000 for Grade 1. UL Listed for fire doors, cUL Listed to Canadian Safety Standards. Conforms to UL10Cand UBC 7-2 (1997). Security Compliance certified for ANSI Grade 1 with all trims.
9200 SeriesMeets ANSI 156.13 Series 1000 Operational Grade 1 with all cylinders. Conforms to UL10C with Signature, V-10 and Mogul V-10 only. Complies with ASTMF1577-95b Detention locks for Swinging doors under Paragraph 6.2, Level 1 & 3; Paragraphs 6.6 and 6.8 with V-10 & Mogul V-10 only. Meets or exceeds ASTMF1577-95b paragraph 6.2 detention impact level 1 for deadbolt functions, level 3 for latchbolt only functions.
16
10 Line Lever Lock:Features
www.sargentlock.comwww.assaabloydss.com
10 Line - New Design!
Strength and Durability• Cycle Test: Exceeds 5 times A156.2 Grade 1
requirements• Abusive Locked Lever Torque- without entry
gained: Exceeds 2 times A156.2 Grade 1 requirements
• 7 YEAR LIMITED WARRANTY – no service required to maintain warranty
Convenience • Installs in 1 minute or less• Quickly adapts to fit multiple through-bolt
positions• User Friendly Packaging • User Friendly Instruction Sheets• Convenient installation diagram on box
Design• Solid feel and precise lever action• Slim Rose design available• Decorative Levers — Coastal Series designs –
Gulfport and Yarmouth• Levers are solid one piece cast construction,
except “J” lever
Flexibility• Fits a variety of door preparations with
adaptable through-bolt positioning• Accommodates retrofit applications with
optional 3-3/4" and 5" backset latches• 6 ADA lever styles to complement a wide array
of design applications• Levers (B, L, J & P) are non-handed for efficient
warehousing and for ease of installation• 10 Architectural grade finishes• 22 Functions• SARGENT uses engineered solutions and
flexible manufacturing processes to accommodate special applications
Security • Torx® and spanner screws optional• Classroom security and multiple locking
functions available• Vandal resistant trim optional (FW- prefix) • Security key systems available (V-10, Signature,
Keso F1, Keso, XC)
Applications• Designed to conform to national & state fire
and handicapped requirements• Offices• Schools/Universities• Hospitals• Manufacturing facilities
Innovation • SARGENT’s revolutionary
SARGuard™ available. This antimicrobial silver-based finish coatingpermanently suppressesthe growth of bacteria,algae, fungus, mold and mildew. EPA and NSF approved and FDA listed
• Broad offering of electro-mechanical configurations offer higher security for the most demanding access/egress control applications
• Flexible, Strong and installs in 1 minute or less!
• A heavy duty cylindrical key-in-lever lock, the 10 Line is the standard for institutional applications such as medical, educational and municipal facilities
Speed. Strength. Flexibility.SARGENT 10 Line Scores a Perfect 10SARGENT’s 10 Line design surpasses all competitive products in strength and durability. The unique lock design exceeds Grade 1 requirements. At over 4,000,000cycles, the 10 Line beats the closest competitor by 30%. As for abusive force, this lock endures more than two times the standard without allowing entry.
If you’re looking for flexibility, the 10 Line offers twenty-two different functions and six different lever designs, including decorative Coastal Series. The through-boltpositions are adaptable to fit almost any door preparation. Best of all, the lock can be installed in one minute or less, making installation as easy as 1-2-3!
10 Line Lock
17
T-Zone 11 Line Lever Lock:Features
www.sargentlock.comwww.assaabloydss.com
The SARGENT T-Zone* sets a higher standard for Grade 1 bored-in locks. The unique T-Zone construction provides unequalled strength and durability for the mostdemanding applications like schools and hospitals. This is accomplished by true interlocking between the lockbody and the latch.
Specify the SARGENT T-Zone when you need the ultimate in strength and durability in a bored-in lock. Accept no substitute. There is still no equal!
U.S. Patent No. 6,626,018
T-Zone Construction – There is no equal!
Direct linkage with fixed alignment between the hub and the latch is the best construction for quietly and effectively operating the latch. For this reason, SARGENThas developed the interlocking aligning and latch tubes, which form a rugged torque resistant “T” in the critical twist area. This “T-Zone” construction, combined withlong lasting components, makes T-Zone Lever locks outstanding!
Simplecylinder removal
Many functions are easilyfield changeable
Construction – Interlocking construction between lockbody and latch
Solid cast levers
Accommodates doors1-3/4" (44mm) to 2" (51mm) thick and 2-1/4" (57mm) to 2-1/2" (64mm) thick
Seamlessbrass tube
Multiple Key Systemsavailable
Small 2-3/4"(70mm) dia. rose
Only 45° of lever rotation to retract latch
Lockbody – Cast/machined stainless steel
Security screw
Strength and Durability
• Unequaled strength and durability
• Withstands 3-1/2 times ANSI/BHMA A156.2Grade 1 torque force on a locked lever.Over 3,000 in/lbs!
• Exceeds 10 times ANSI/BHMA A156.2 Grade 1standard for cycle testing. Over 8 million cycleswith virtually no lever sag!
• Non-handed field reversible
• Fits on minimum stiles 4-1/4" (108mm)(B and O roses) and 4-1/2" (114mm)(E and L roses)
• Torque values greatly increased by a stainlesssteel bearing that provides stops for the heattreated lever locking piece
• 10 year limited warranty - no service required tomaintain warranty
Convenience
• Finishes: 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26,26D & split finish
• Fits both 160 & 161 door preps.No through-bolts required
• Fewer parts for easier installation
• Only 45 degrees of lever rotation requiredto retract latch
• 4 Solid ADA lever designs and 4 roses available to cover a wide variety of door preps anddesign requirements
Security• UL and cUL fire door Listed, conforms to
UL10C and UBC7-2 (1997)
• High security lever attachment available for applications subject to severe vandalism
• Resists vandalism
• Torx® and spanner screws
• Classroom security function available
• Security key systems available (V-10, Signature, Keso F1, Keso, XC)
Applications• High traffic areas – offices, public buildings,
and hospitals
• High abuse areas – institutions, schools, retail
• Any door that requires the contemporary look of a small rose and durability that exceedsGrade 1 standards
Innovation• SARGENT’s revolutionary SARGuard™ available
• Patented “T-Zone” construction with true interlocking between the lockbody and the latch
A Revolutionary Lock!
<stillT-Zone Lock
18
Bored-in Locks:Specifications & Trim Designs
www.sargentlock.comwww.assaabloydss.com
T-Zone 10 Line 7 Line 6500 Line
Specifications Extra Heavy Duty. Far exceeds Heavy Duty. Exceeds Standard Duty. Exceeds Standard Duty. Exceeds ANSI A156.2, Series 4000, Grade 1 ANSI A156.2, Series 4000, Grade 1 ANSI A156.2, Series 4000, Grade 2 ANSI A156.2, Series 4000, Grade 2
UL Listed for use on fire doors. UL Listed to Canadian Safety Standards (except GX)
Conforms to standards UL 10C “Positive Pressure fire tests of door assemblies” and UBC 7-2 (1997) (except GX)
For Doors 1-3/4" (44mm) to 2" std. and 1-3/4" (44mm) to 1-3/8" (35mm) or 1-3/8" (35mm) to 2-1/4" to 2-1/2" (57mm to 64mm) 2" (51mm) thick 1-3/4" (44mm) thick to 2" (51mm) 1-3/4" (44mm) thick(31- prefix)1-3/8" (35mm) thick not available
Backset 2-3/4" (70mm) standard, 3-3/4" (95mm) 2-3/4" (70mm) standard, 2-3/4" (70mm) standard, 2-3/4" (70mm) standard, available (23- prefix). 5" (127mm) 3-3/4" (95mm) and 5" (127mm) 2-3/8” (60mm) available (prefix 20-) 2-3/8" (60mm) available available (25- prefix) available (prefixes 23- and 25-)
Latch Stainless steel bolt 7/8" (22mm) dia. x Stainless steel, 1/2" (13mm) throw, Brass, 1/2" (13mm) throw Brass, 1/2" (13mm) throw1/2" (13mm) throw. 3/4" (19mm) throw 3/4" (6mm) throw- (Prefix 41)for pairs of doors (41- prefix)
Front Wrought brass, bronze or stainless Brass, bronze, stainless steel. 2-1/4" Brass, stainless steel. 2-1/4" Brass, stainless steel. 2-1/4" (57mm)steel. 2-1/4" (57mm) x 1-1/8" (29mm). (57mm) x 1-1/8" (29mm). (Self- (57mm) x 1-1/8" (29mm). Fixed x 1-1/8" (29mm). Fixed bevel, 1/8" Self-adjusting for flat to 1/8" (3mm) in adjusting) Fixed bevel, 1/8" (3mm) in bevel, 1/8" (3mm) in 2" (51mm). (3mm) in 2" (51mm).2" (51mm) bevel. 2" (51mm).
Strike 800 curved lip strike standard. Wrought Standard curved lip #800, 2-3/4" Standard curved lip #800, 2-3/4" Standard curved lip #500, 2-3/4" brass, bronze, and stainless steel. (70mm). Brass, bronze, stainless steel. (70mm). Brass, bronze, stainless (70mm). Brass, stainless steel.808 ANSI curved lip strike (28- prefix). With wrought aluminum box. Other steel. With wrought aluminum box - Other strikes available.Wrought box strike (WBS suffix). strikes available. Specify WBS. Other strikes available.
Hand Universal, not handed B, J, L and P lever. Universal, not B, J, L and P lever. Universal, not Universal, not handedhanded. G & Y Levers – handed. handed. G & Y Levers – handed.
Springs Spring steel Two independent spring roses. Two independent spring roses. Two independent spring roses.One for each lever. One for each lever. One for each lever.
Cylinders Brass, 6 pin. Available in Signature, Brass, 6 pin. Available in Signature, Brass, 6 pin. Available in Signature, Brass, 6 pin. Available in Signature, V-10, Keso F1, Keso, removable XC, V-10, Keso F1, Keso, removable XC, V-10, removable core and SFIC. XC & removable core.core, SFIC, XC. core, SFIC.
Finishes 3, 4, 9, 10, 10B 10BL, 15, 20D, 26, 26D 3, 4, 9, 10, 10B, 10BL, 15, 20D, 26, 26D 3, 4, 10, 10B, 15, 26, 26D 3, 4, 10, 10B, 26, 26D
Split Finishes Available Available Available N/A
Milling (levers) or Milled on backside of lever handle Milled on backside of lever handle Milled on backside of lever handle Molded plastic insert on inside Knurling (knobs) of lever handle
Available Options Prefix 23- 3-3/4" (95mm) Backset Prefix 23- 3-3/4" (95mm) Backset Prefix 14-Full Lip Strike Prefix 14- Full Lip Strike(see catalog for 25- 5" (127mm) Backset 25- 5" (127mm) Backset 20- 2-3/8" (60mm) Backset 20- 2-3/8" (60mm) Backsetcomplete list) 28- ANSI 4-7/8" (124mm) Strike 28- ANSI 4-7/8" (124mm) Strike 28- ANSI 4-7/8" (124mm) Strike 28- ANSI 4-7/8" (124mm) Strike
SC & SE - Schlage Keyways SC & SE - Schlage Keyways SC- & SE- Schlage Keyways SC- & SE- Schlage KeywaysSL- Security Lever Attachment FW-Freewheeling FW-Freewheeling
T-ZoneExtra heavy duty lock that setsthe standard for Grade 1 bored-inlocks. The unique T-Zone construction provides unequalledstrength and durability for themost demanding applications.
10 LineA rugged, heavy duty lock thatexceeds ANSI Grade 1 requirements. With a variety offunctions, it is ideal for schools,public buildings, hospitals, classrooms or other high abuse installations.
7 LineStandard duty lock designed forinterior and exterior applicationsin public buildings, medicaloffices, hotels/motels and government facilities.
6500 LineStandard duty lever lock well-suitedfor small offices, storerooms, restrooms and clinics.
Lever Locks
19
Bored-in Locks:Specifications & Trim Designs
www.sargentlock.comwww.assaabloydss.com
GX Series 8 & 9 Lines* 6 Line
*9 Line is the marine version of 8 Line with non-ferrous, corrosion resistant parts. Limited functions (prefixes).
GX SeriesLever locks for light to moderateapplications in commercial interiors,apartment buildings, hotels/motels,and assisted living facilities. Availablein two standard and two decorativelever designs.
8 & 9 LineHeavy duty, with interlocking aligningtube and latch tube for exceptionalstrength and durability, making it anideal candidate for high abuse areas.Schools, hotels/motels, governmentfacilities and hospitals all benefit fromthe smooth operation and strengththat result from the solid T-Zone construction of this lock.
6 LineIncorporating a broad spectrum offunctions, designs and finishes, the 6line is suited for apartment houses,offices, motels and small commercialbuildings.
Specifications Light Duty. Meets Heavy Duty. BHMA certified under Standard Duty. BHMA certified underANSI A156.2, Series 4000, Grade 2. ANSI A156.2, Series 4000, Grade 1. A156.2, Series 4000, Grade 2.
UL Listed for use on fire doors. UL Listed to Canadian Safety Standards (except GX).
Conforms to standards UL 10C “Positive Pressure fire tests of door assemblies” and UBC 7-2 (1997) (except GX).
For Doors 1-3/8" (35mm) to 1-3/8" (35mm) to 1-3/4" (44mm) thick std. 1-3/8" (35mm) to1-3/4" (44mm) thick or up to 6" (152mm) thick 8 Line 1-3/4" (44mm) thick
prefix 31-.
Backset 2-3/8" (60mm) and 2-3/4" (70mm) std, 3-3/4" (95mm) and 2-3/8" (60mm) std.2-3/4" (70mm) 5" (127mm) available (prefixes 23- 2-3/4" (70mm) available (prefix 24-)
& 25-). Longer backsets available.
Latch 1/2" (13mm) throw Anti-Friction, 1/2" (12mm) throw, stainless Brass, 1/2" (13mm) throw, UL listedsteel. Available 8 Line with 3/4" (19mm) throw (prefix 41-), UL listed.
Front Brass, 2-1/4" (57mm) x 1" (25mm) Brass, bronze, stainless steel. 2-1/4" Brass, bronze, stainless steel. 2-1/4" (57mm) x 1-1/8" (29mm). Self (57mm) x 1-1/8" (29mm). Self adjusting for flat doors or doors adjusting for flat doors or doors beveled 1/8" (3mm) in 2" (51mm). beveled 1/8" (3mm) in 2" (51mm).
Strike Standard curved lip #600, Standard curved lip #800, ANSI Standard curved lip #600, ANSIBrass, bronze, stainless steel. A115.3. 2-3/4" (70mm). Brass, bronze, A115.3. 2-3/4" (70mm). Brass, bronze,508 ANSI curved lip. 506 full lip. stainless steel. Wrought box stainless steel. Wrought box
available. available.
Hand L & B levers – non-handed, field Universal, non-handed Non-keyed sets, universal. Keyed setsreversible reversible. Removable core sets areY & G levers – handed handed (specify RH or LH).
Cylinders N/A Brass, 6 pin. Available in Brass, 6 pin. Available inXC, Signature, V-10, Keso F1 & Keso. XC, Signature, & removable core Removable core in C knob. in S knob.
Finishes 3, 4, 10B, 26, 26D 3, 4, 10, 10B, 10BL, 15, 20D, 26, 26D, 3, 4, 10, 10B, 26, 26D.32, 32D
Split Finishes 3/26 for 65 function only. Available Available
Milling N/A Knurling (C knob only) N/Aor Knurling
Available Prefix 13-1/4" radius latch Prefix 23- 3-3/4" (95mm) Backset Prefix 23- 3-3/4" (95mm) BacksetOptions (see 14- Full Lip Strike 25- 5" (127mm) Backset 24- 2-3/4" (70mm) Backsetcatalog for 15- drive in latch 28- ANSI 4-7/8" (124mm) Strike 25- 5" (127mm) Backsetcomplete list) 28- ANSI 4-7/8" (124mm) Strike 31- 8 Line for doors up to 6" (152mm) 28- ANSI 4-7/8" (124mm) Strike
Lever Locks Knob Locks
20
Bored-in Locks:Functions
www.sargentlock.comwww.assaabloydss.com
This chart lists common functions and their variations within each of the lock lines. Shaded levers indicate that they
are rigid at all times. ANSI function numbers (prefix F) are shown where applicable. Other functions available.
Additional information can be found in the lock sections of the SARGENT catalog or at www.sargentlock.com.
*G04
*G05
U15
*G37
G38
*G50
*U65
Location/Description Function T-Zone 10 Line 7 Line
F86
F81
F75
F84
F93
F76
F86
F81
Push-turn button in I/S leverreleased by key O/S or turning I/Slever, unless button in fixed position.
F75
F84
F76
N/A
Operating O/S emergency release orI/S lever or closing door releasespush button and unlocks O/S lever.
Operating O/S emergency releaseor I/S lever or closing door releasespush button and unlocks O/S lever.
Push-turn button in I/S leverreleased by key O/S or turning I/Slever, unless button in fixed position.
Turning I/S lever releases button.Special shut-out key available. Std.visual occupancy indicator.Deadlocking latch.
F86
F81
F75
Operating O/S emergency releaseor I/S lever or closing door releasespush button and unlocks O/S lever.
F76
Turning I/S lever releases button.Special shut-out key available. Std.visual occupancy indicator.Deadlocking latch.
F84
F93
PatentPending
N/A
Storeroom or Closet (04) Latch from outside by key, inside by lever.
Outside lever is rigid at all times. Deadlocking latch.
Entrance or Office (05) Latch by either lever unless O/S lever is locked by push/
turn button in I/S lever. Push button released by key O/S or lever I/S.Turn button must
be manually released. Key retracts latch when O/S lever is locked. Deadlocking latch.
Passage (15) Latch by both levers at all times.
Classroom (37) Latch by either lever unless O/S lever is locked by key. Key O/S
locks or unlocks O/S lever. Inside lever always operable. Deadlocking latch.
Classroom Security (38) Latch by either lever unless outside lever is locked by key.
Key in either lever locks or unlocks outside lever. Key in outside lever retracts latch
when O/S lever is locked. Inside lever always operative. Deadlocking latch.
Hotel/Motel (50) O/S lever rigid at all times. Latch by key O/S and lever I/S.
Depressing push button when door is closed shuts out all keys except emergency key and
projects visual occupancy indicator in cylinder face. Push button released by turning I/S
lever automatically reactivating all keys and retracting visual occupancy indicator.
Lock out key fixes push button in locked position, shutting out all keys except
emergency. Push button fixed by lockout key must be released manually. Lock out
key provided. Deadlocking latch.
Privacy, Bathroom (65) Latch by either lever unless O/S is locked by push
button.O/S emergency release in outside lever unlocks outside lever and releases
inside button with flat blade screwdriver.
OL LJ BP EB
Trim Designs
7 and 10 Lines
LLLP LJLB
T-Zone
GY
Both roses available with each lever
21
Bored-in Locks:Functions
www.sargentlock.comwww.assaabloydss.com
KL
6500 Line
Trim Designs
EBBC EB
6 Line
BS
OBOB
OL
GX Series
OB
OY
OG
OSL
8 & 9 Lines
LB
Function 6500 Line GX Series 8 & 9 Line 6 Line
SL lever handle for 6 Line is furnished only where indicated by this symbol;
e.g., 6G04 can be furnished with the SL lever inside, and any knob outside.
F86
F75
F76
F86
F81
F75
Turn button in I/S knob.
F76
Operating O/S emergency release or I/S knobor closing door releases push button andunlocks O/S knob.
Turning I/S knob releases button. Special shut-out key available. Std. visual occupancyindicator. deadlocking. 8 line only.
Turning I/S knob releases button. Special shut-out key available. Std. visual occupancyindicator.
Operating O/S emergency release orI/S knob or closing door releasespush button and unlocks O/S knob.
Push-turn button in I/S knob released by key O/Sor turning I/S knob, unless button in fixed position.
F81
N/A
F86
F81
F75
F76
Operating O/S emergency release orI/S lever or closing door releasespush button and unlocks O/S lever.
N/A
N/A
Push-turn button in I/S lever releasedby key O/S or turning I/S lever,unless button in fixed position.
N/A
N/A
F75
N/A
N/A
F76
F84
N/A
F84 (37 function)F85 (87 function)
F84
N/A
F93F93
G04
G05
U15
G37
G38
G50
U65
22
Exit Devices:80 Series
www.sargentlock.comwww.assaabloydss.com
Raising the Bar of Excellence!
Simplicity• Easy installation
• Maintenance free design
• Few moving parts – less wear
• Modular construction
• No need to remove device from door for keying
Strength and Durability• Made of finest component materials
• Heavy duty mounting construction
• Built to withstand abusive conditions
• Available options to meet Dade County Protocols and other local hurricane code requirements for high wind load and missile impact (consult factory)
• 5 year warranty
Aesthetics• Clean, simple, aesthetically pleasing design
• “True” architectural hardware finishes consistent with BHMA/ANSI standards
• Coastal Series decorative lever trim available
Innovation• SARGuard™ antimicrobial finish coating offers
a new level of protection
• Broad offering of electromechanical solutions forthe most demanding access/egress control applications
• CTL (Center and Top Latching) vertical rod devices offer less bottom rod convenience with true center latching for added security
8300 Narrow Stile Mortise Lock
MD8600/NB-MD8600 & WD8600/NB-MD8600ConcealedVertical Rod for metal and wood doors
8400/NB8400 Narrow StileConcealed Vertical Rod
8800 Rim
8500 Narrow Stile Rim
8900 Mortise Lock
8700/NB8700 Surface Vertical Rod
The best combination of Simplicity, Strength, Durability, Aesthetics andInnovation in the most complete line of exit devices in the industry.
All 80 Series
– A NEW Innovation in Life Safety
SARGENT, partnering with
E-Lite Technologies, Inc.®, the world-wide
leader in electroluminescent technology,
introduces SARGuide. The SARGuide™ exit device
contains an illuminated touchpad to enhance the
visibility of exit locations in dark or smoke-filled
passages. As a supplement to existing codes for
egress lighting, SARGuide effectively improves the
safety of any public building! SARGuide addresses
the increasing concern about public egress,
particularly in low-visibility conditions. Research
shows that in panic conditions, exit signs and
locations are missed or go unnoticed. Smoke rises
and can quickly block the visibility of standard exit
signage. SARGENT exit devices, with the SARGuide
feature, are placed lower on the door providing an
extended window of opportunity for safe emergency
egress. Specify SARGENT Exit Devices with SARGuide
to ensure the highest level of safety and security!
Benefits• Highly visible in smoke and other low
visibility conditions
• Three to five times greater visibility than anyother light source
• Can be easily spotted from considerable distances
• Green/blue color conducive to night vision
• No filaments to break or fail
• Immune to vibration or shock
• Extremely durable construction. Continues to operate even if pierced
• Intuitive operation. Integral “EXIT” signage guides users directly to the means of egress
SARGENT exit devices supply the robust means to ensure safe egress from schools, auditoriums, public and commercial buildings during routine, daily activities and
emergencies while providing the highest level of security at the opening. Designed and manufactured to survive high usage, abusive locations, these exit devices
maintain an aesthetically pleasing appearance with a wide range of locking functions. Available in the mechanical functions to allow proper operation of the opening,
they are BHMA certified to ANSI A156.3 Grade 1, comply with NFPA 80 and 101, and are fire Listed by UL and cUL.
All SARGENT Concealed Vertical Rods are now available without a bottom rod! A great solution for those cross corridor doors in hospitals, schools and nursing
homes. No bottom rod exit devices eliminate the need for a floor strike, decreases installation time, easier door prep and shortens rod adjustment time. Concealed
top rod offers security and aesthetics. Top bolt is now guarded for additional security. Center case chassis has been redesigned with smooth linear motion. No bot-
tom strike allows free access for wheelchair and carts and eliminates tripping potential.
Photoluminescence - The Latest Life Safety Innovation! Photoluminescent (PL) technology is ideal for
retrofit situations. Ambient lighting - the only power
source - is absorbed by the photoluminescent
coating and is emitted when the light source is
diminished or eliminated.
• No wiring or maintenance needed
• Recharges from ambient light
• Simple economical installation
23
Exit Devices:80 Series
www.sargentlock.comwww.assaabloydss.com
Electromechanical SolutionsSafe, simple, convenient, and secure operation of the opening is easy to achieve with the broad variety of SARGENT electromechanical rails. Fully contained delayed
egress, alarmed exits and electric latch retraction provide the means to regulate the opening as the situation and location requires.
Also Available! Coastal Series Trim• Strong and durable
• Solid cast or forged brass
• Versatile and vandal-resistant
• Available for all 80 Series exit devices, including electromechanical
• Used with ET trim
Standard Trim for the 80 and 90 Series
ET/Freewheeling ET PTBPSB STS MAL
MSLFLLFSL
FLWFSW
Pulls: 862 – 1" x 10", 863 – 1" x 18",
& 864 – 3/4" dia x 10"PRK
Coronado
Rockport
Gulfport
Sanibel
Electroguard®
Delayed Egress
Alarmed Exit Device Electric LatchRetraction/Dogging
Exceptional Rails• Maintenance free design requires no lubrication
• Only 13 components
• Brass, bronze or stainless steel
• Completely flush end cap design available
• Heavy-duty mounting bracket withstands abuse
The “Workhorse”:The 8800 Series Rim Device• One chassis, 17 Functions – the perfect stocking device!
• Only 7 moving parts – less wear, less maintenance!
• Far exceeds ANSI/BHMA Grade 1 standards– More than 5 times for
static load– More than 8 times
cycle requirements
• Non-handed
• Quick retrofit - kits available
• Simple door prep and installation!
Multiple trimthrough-boltoptions
Non-handed chassisaccepts rim cylinderor trim installation
Strong one piecesolid stainlesssteel latch
Auxiliary Controlused with 862–864
pulls (specify)
Yarmouth
24
Exit Devices:80 Series
www.sargentlock.comwww.assaabloydss.com
Traditional, Familiar and SecureWhen a more traditional look or styling feature such
as a raised panel door is being used, the SARGENT
90 Series supplies the means to satisfy style and Life
Safety/Fire code requirements. Architectural
continuity is easy to maintain during renovations or in
additions to older construction with the 90 Series
because original and new hardware blend seamlessly
together. Based on a simple lever design, the 90
Series are BHMA certified to ANSI A156.3 Grade 1
and are amply suited for operation in heavy duty
exterior and interior applications.
With a selection of eleven mechanical functions and
a variety of outside trims, control of egress and
entrance through virtually any opening is easy and
simple. Constructed of brass, bronze, stainless steel
and heavy cast, non-ferrous alloys, they are Fire
Listed by UL and cUL.
9800 Rim
9900 Mortise Lock
9700 SurfaceVertical Rod
All 90 Series
980 Mullions
Mullions provide a solid and secure center point for
double door rim bolts to lock firmly behind while
providing a surface for the facing door edges to butt
against. This ensures a secure, weather or smoke
tight seal between the door and mullion without
having to have two complete frames and the space
between them. Typically, when two frames are used,
smaller doors than the opening or corridor can
accommodate are used. Mullions allow for the use
of wider doors, making for wider openings and
easier movement through exits and corridors.
Mullions are available to meet most opening
requirements; fixed, removable, fire rated, high
abuse and lockable. Typical removable mullions are
extruded aluminum intended for general usage and
non-fire rated applications with top and bottom
retainers designed for easy removal. Fire rated
mullions are iron and securely mounted in place by
the top and bottom retainers. These mullions are
also specified for high abuse locations such as
schools and public buildings.
When corridors or entrance ways occasionally need
to be full width to allow the unimpeded flow of
people or equipment but maintain the security of the
double door opening, a 980 lockable mullion is ideal.
Like the permanent version, the lockable mullion
provides a solid and secure center point for the rim
bolt to lock behind. When the need for additional
width occurs, the head of the mullion is unlocked
and the mullion is moved out of the way; then
replace and relock when finished. No tools are
needed, just the cylinder key. Designed for wide stile
doors, in aluminum or fire rated steel, the 980
lockable mullion is the easy way to provide wide
openings with a SARGENT exit device.
25
Exit Devices:20 & 30 Series
www.sargentlock.comwww.assaabloydss.com
LL OB
K-HTBD-GTB (similar to HTB,
no cylinder)
E-GTB
TP
Outside Trim For 20 and 30 Series
O/S Lever trim and O/S Pull trim without thumbturns
All 20 & 30 Series
20 and 30 SeriesSimilar in concept and operation to the 80 Series, the 20 and
30 Series provide a cost effective alternative for locations
required to meet Life Safety and fire codes. Constructed of
rolled steel and finished with a rust resistant powder coat to
match popular plated finishes, they are BHMA certified to
ANSI 156.3 Grade 1 standards and UL and cUL Listed.
Chassis is heavy, cast non-ferrous alloy that mounts sepa-
rately to the door, assuring easy installation and mainte-
nance. Offered in the four most popular functions as rim or
vertical rod devices, they handle the needs of single and dou-
ble doors, including mullions. A variety of through-bolted, key
operated outside trim options complete the package.
The 20 Series features a movable push rail that extends
completely across the door, allowing for rail operation
anywhere across the door surface.
3727 Surface Vertical Rod
3828 Rim
2727 Surface Vertical Rod
2828 Rim
26
Door Closers
www.sargentlock.comwww.assaabloydss.com
Close the Door!Door closers provide the means to closing a door and preventing it from blowing open in the wind, slamming, or staying open unintentionally.
They provide the force to close an opening in an emergency, preventing the spread of smoke or fire and help limit unauthorized re-entry.
All SARGENT door closers are BHMA certified to ANSI A156.4 Grade 1 requirements. To accommodate the myriad of interior and exterior door applications, varying
door widths, weights, and degrees of swing, a wide selection of cast iron and aluminum body closers are available. Mounting styles include surface mount and con-
cealed for a wide range of opening conditions. Adjustable closing force and an assortment of arm styles allows for multiple closer mounting positions such as stan-
dard, parallel, track, and top jamb.
Aluminum Body ClosersThe surface mount, cast aluminum closers come in a variety of types from basic and economical, to commercial and architectural grade designs. All feature separate
closing, backcheck and latching speed adjustments along with adjustable spring power. ADA compliance is achievable with most units, depending upon the actual
application. All Series are UL and cUL Listed.
1130 & 1131 Series
1430 & 1431 Series351 Series
Cast Iron Body ClosersThe one piece, iron closer series is superior for use in heavy-duty interior and exterior applications. These closers conform to UL10C and UBC 7-2 (1997) and are UL
and cUL Listed. Separate closing and latching controls with backcheck and pressure relief valves are also standard features. Forged steel arms and a 10 year warran-
ty help ensure long, dependable product life.
268 Series Concealed• Adjustable from size
3 to 5
• Handed
• Security packages available
• CSPS/CSPD Concealed security switches
278 Series Concealed/Exposed Arm• Adjustable from size 1 to 6
• Handed278 Series
281 Series
268 Series
FinishesAll closers are available with sprayed enamel finishes and rust resistant, powder coated arms to match the standard plastic covers finished in EN, EB, ED, EP and
EAB. Plated architectural finishes for the arms and metal covers of the 281, 351 and 1430/1431 allow the closers to blend with the trim finishes of the other hardware
on the opening. The plated finishes include 3, 4, 9, 10, 10B, 20D, 26 and 26D.
281 Series Surface Mount• Advanced backcheck
available
• Adjustable from size 1 to 6
• Delayed action available
• Retrofits 250 and 1250 templating
• Security packages available
• Non-handed
351 Series• Heavy duty closer ideal for heavy
draft or wind conditions found on exterior doors of hospitals, schools, and convention centers
• Conforms to UL 10C and UBC 7-2 (1997)
• Cast one piece, high silicon (14%) aluminum body with full, heat treated steel rack and pinion provides superior strength and wear resistance
• Delayed action available
• Adjustable from sizes 1 to 6
• Forged steel arms
1331 Series• Suitable for new construction and
ideal for renovations
• Standard duty applications include offices, assisted living facilities, hotel guest rooms, public housing and retail establishments
• One piece high strength aluminum alloy body
• Adjustable closing force range from 1-6
• Universal body interchangeable for allapplications
1430 Series• General purpose interior and
exterior applications in schools, offices and manufacturing facilities
• Conforms to UL 10C and UBC 7-2 (1997)
• Cast one piece, silicon/aluminum alloy body with full rack and pinion for increased strength and wear-resistance
• Delayed action available
• Models adjustable from sizes 1 to 4 and 3 to 6
• Pressure relief valve for backcheck and delayed action
• Retrofits existing 1230/1231 Series installations
1130 Series• Economical for general purpose
applications on motel entry doors, retail buildings and interior office doors
• Cast aluminum body and full rack and pinion with heat treated spindle
• Models adjustable from sizes 1 to 4 and 3 to 6
• Reversible
• Furnished with brackets for standard,parallel, and top jamb mounting
• Optional cover
1331 Series
27
Holders & StopsAuxiliary Locks
www.sargentlock.comwww.assaabloydss.com
Push/Pull LatchesDesigned for silent, positive latching and conveniences, the 114/115
Hospital latches can be opened with a slight push or gentle tug on the
paddle. Simple to operate while carrying equipment or trays, the latches
are UL fire rated and are available lettered with “Push” and “Pull” on the
escutcheons. Chassis mounted construction combined with simple door
prep ensure easy, secure installation.
The 7800 Push/Pull hospital trim design known for its ease of operation
is coupled with the strength and integrity of a mortise lock to provide
greater versatility. The trim, commonly used in hospitals and healthcare
facilities, can now service conference rooms, handicapped restrooms,
laboratories and pharmaceutical facilities that require more durability and
security features than a cylindrical lock can provide.
114 LineOne Handle Up,One Handle Down
115 LineBoth Handles Down
Auxiliary Deadlocks
4870 Line 8200 LineSecurity Grade 1Operational Grade 1
480 LineGrade 1
470 LineGrade 2
460 LineGrade 2
Overhead Door Holders & StopsThree different BHMA Grade 1 certified 590/690 series & four
1530/1540 sizes offered from standard duty to heavy duty and
concealed to surface applied.
Repeated use of closers as a means to limit door travel can result in
extreme wear and early failure. The solution is the addition of a
dedicated overhead stop. Designed to work in conjunction with
SARGENT closers, they feature bronze tracks, slides, arms, and jamb
brackets, are reversible and have optional hold open feature. With
finishes to match the closers, they complete the look and operation of
the opening.
590 Series shown
Auxiliary Locks
7837 PT HorizontalMountShown
To add more security and control to an opening (storeroom or cage)
SARGENT’s broad line of Auxiliary deadbolt locks lend their strength
to the job. From simple-to-install bored-in type 460/470/480 deadbolts
to fully mortised or Grade 1 8200 mortise locks, these deadlocks
supply primary or additional security. All deadbolts can be masterkeyed
into SARGENT key systems and the 480, 4870 and 8200 are available
in most SARGENT cylinder systems, including Signature, removable
core and SFIC.
28
Finishes
www.sargentlock.comwww.assaabloydss.com
SARGENT BHMA Description
3 605 Bright brass, clear coated
4 606 Satin brass, clear coated
9 611 Bright bronze, clear coated
10 612 Satin bronze, clear coated
10B 613 Dark oxidized satin bronze, oil rubbed
10BL Dark oxidized satin bronze, oil rubbed, clear coated
15 619 Satin nickel, clear coated
20D Statuary bronze dark lacquered
26 625 Bright chrome plated
26D 626 Satin chrome plated
32 629 Bright stainless steel
32D 630 Satin stainless steel
EB 690 Sprayed bronze enamel to match 10B
ED 693 Sprayed black enamel to match 20D
EN 689 Sprayed aluminum enamel
EP 691 Sprayed bronze enamel to match 10
EAB 696 Sprayed brass enamel
ERD Red powder coat (exit alarm devices)
PEB 690 Polyester powder coated to match 10B
PED Polyester powder coated to match 20D
PEN 689 Polyester powder coated to match 28
PEAB Polyester powder coated to match satin brass enamel
SG SARGuard - Antimicrobial clear coating
NOTE: Where possible, SARGENT uses a clear powder coating on plated finishes for increased corrosion
resistance and durability. Also available on 32 and 32D.
Actual colors may vary from those represented on this page. This is due to color variations which may occur
during printing. Do not use this page for sample or product comparison.
Finishes
EB Finish
ED Finish
EN Finish
EP Finish
03 Finish 04 Finish 09 Finish 10 Finish 10B Finish 10BL Finish
20D Finish 26D Finish 32 Finish 32D Finish26 Finish
EAB Finish
15 Finish
29
ASSA ABLOY Door Security SolutionsField Support
www.sargentlock.comwww.assaabloydss.com
Door Security Solutions™
Formed by the fusion of ESSEX Industries and YSG Door Security Consultants,ASSA ABLOY Door Security Solutions offers complete security and life-safetysolutions, all from a single source. With twelve door and hardware brands, your local ASSA ABLOY Door Security Solutions team now has twice the tools to focus all efforts on understanding end-user needs and providing excellent solutions.
Over and above product consultation and training, our sales and marketingexperts bring you the resources of ASSA ABLOY, the world’s largest companyfocusing solely on door security and life-safety products.
+ Integrated security and life-safety solutions to meet end-users’ most challenging problems
+ Nationwide network of local sales teams+ Enhanced distributor support+ Architectural education and specification consulting
CECO DOOR CORBIN RUSSWIN CURRIES FOLGER ADAM EDC GRAHAM HES McKINNEY NORTON RIXSON SARGENT SECURITRON YALE
www.sargentlock.comwww.assaabloydss.com
For sales information contact:ASSA ABLOY Door Security Solutions. • 110 Sargent Drive • New Haven • CT 06511
Phone: 800-377-3948 • Fax: 203-777-9042 • Email: [email protected] • Web site: www.assaabloydss.com
ASSA ABLOY Door Security Solutions - Canada • 3475 14th Avenue • Markham • Ontario • Canada L3R 0H4Phone: 905-940-2040 • Fax: 905-940-3242 • Web site: www.assaabloycanadadss.ca
For customer service or other information contact:SARGENT Manufacturing Company • 100 Sargent Drive • New Haven • CT 06511
Phone: 800-727-5477 • Fax: 888-863-5054 • Email: [email protected] • Web site: www.sargentlock.com
Founded in the early 1800's, SARGENT Manufacturing Company is a market leader in the manufacture of architectural hardware,including locks, cylinders, door closers, exit devices, electromechanical products, and access control systems
for new construction, renovation, and replacement applications.
ASSA ABLOY is the world's leading manufacturer and supplier of locking solutions,meeting tough end-user demands for safety, security and user friendliness.
© 2006 ASSA ABLOY Door Security Solutions
Proud supporters of:
90002-3/06