sap4.7

8/7/2019 sap4.7

http://slidepdf.com/reader/full/sap47 1/14

http://www.experts-exchange.com/Database/Software/ERP/SAP_ERP/Q_23542993.html

Step by Step Guide:

SAP Installation Procedure on WIN 2k Adv Server and WIN XP

INSTALLING HARD DISK ( IF U ARE TRYING TO LOAD SAP ON A SEPARATE

HDD)

Connect HDD with cable

Win 2000 installation.

1. Go to bios set up by pressing continuously clicking del on start.2. change the first bootable device to CD.

3. insert the CD and RESTART system.

4. click any key to boot from CD.5. click ENTER

6. click ENTER again7. Click on C ( to continue)

8. click on F8 ( to agree)9. partitions C: 4197Mb, D 12000Mb, E 6000Mb

10. select C drive

11. click ENTER to install12. click ENTER again to continue

automatically restarts, set up continues.

13. click on NEXT14. click on NEXT

15. click on NEXT

16. key RBDC9-VTRC8-D7972-J97JY-PRVMG17. click on NEXT18. TYPE no of concurrent connections 9

19. click on NEXT

20. TYPE COMPUTER NAME 46IDES21. click on NEXT

22. remove IIS (deselect)

23. click on NEXT24. enter date & time

25. click on NEXT

26. finish

WINDOWS CONFIGURATION

Creating partitions for new disk.

STARTà PROGRAMMESà ADMIN TOOLSà COMP MANAGEMENTà DISK MANAGEMENT

1. right click on unallocated space.

2. click on CREATE PARTITIONS,3. click on NEXT



8/7/2019 sap4.7


4. click on NEXT

5. type 11320 (partition size)


8. type file system NTFS

9. click on quick format10. click on NEXT

11. click on FINISH

12. again right click on unallocated space13. repeat the exercise from point 5 but for complete size

note

C drive contains operating system

E/D drive contain 46C softwareS drive contains SAP software..

PERFORMANCE

MY COMPUTERà propertiesà advanced à performance optionsàchange,1. Select S drive.

2. type initial =1600& max =16523. click on SET

4. click on OK

5. click on OK

6. click on OK

NETWORK SETTINGS

STARTàSETTINGSà CONTROL PANELà ADD/REMOVE HARD WARE,1. click on NEXT

2. click on NEXT

3. select ad a new device4. click on NEXT

5. select (now I want to select from Hardware list)

6. click on NEXT7. select network adaptors,

8. click on NEXT

9. select MICROSOFT


12. click on FINISH

13. close all windows14. right click on MY NETWORK PLACES,

15. go to properties,

16. right click on local area connections17. should be able to see Microsoft loopback adaptor on the screen.

18. select properties

19. select TCP/IP

20. click on properties

8/7/2019 sap4.7


21. select ( use the following IP addresses)

22. type IP addresses 198.1.1.1

23. subnet mass 255.255.255.024. click on OK

25. select show icon on Task bar

26. click on OK 27. close all windows.

HOST FILE CONFIGURATION1. go to WINDOWS EXPLORER

2. select C drive, WIN NT, system 32 , DRIVERS, etc

3. double click on HOSTS

4. open with note pad5. go to end of the page

6. type IP address 198.1.1.1

7. press TAB once

8. type 46cides9. press TAB twice

10. click on SAVE11. click on EXIT

12. RESTART sytem

Software contains three folders1. 46cides ( a. KERNEL, b. ORACLE 817, c.ORACLE PATCHES

2. DB EXPORT

3. SAP GUI

ORACLE INSTALLATION

1. 46CIDESàoracle 817à NTài386àsetup run the set up by double clicking2. click on NEXT

3. source path &&&&

destination path : S:\oracle\ora814. click on NEXT

5. click on NEXT

6. click on NEXT

7. type GLOBAL DATA BASE NAME : ORACLE8. click on NEXT

9. click on INSTALL

10. click on OK 11. click on EXIT

12. click on YES

13. close all windows14. startà programsàadmin toolsà services

15. select ORACLE SERVICES

16. select all ORACLE releated services ONE BY ONE.

8/7/2019 sap4.7


ORACLE PATCHES

46CIDESà ORACLE PATCHESàPATCHà DISK1à INSTALLà WIN 32

1. set up (double click)2. click on NEXT

3. click on NEXT

4. click on INSTALL5. click on INSTALL

6. click on EXIT

KERNEL INSTALLATION

46CIDESàKERNELàNTà I386à MMC

1. double click on IMMC

2. click on NEXT3. I agree

4. click on NEXT

5. click on NEXT

6. click on NEXT7. click on FINISH

46CIDESàKERNELàNTà I386à NT PATCH1. double click on R3DLLINS

2. click on Ok

3. close all windows

4. RESTART46CIDESàKERNELàNTà COMMONà

1. double click on R3 SET UP

2. type SAP SYSTEM NAME IND3. click on NEXT

4. click on NEXT

5. click on NEXT at 85%6. click on NEXT automatically logs off

7. login and control+alt+del

CENTROL INSTANCE

Startàprogramsàsap system for INDà install CENTRAL INSTANCE

1. click on NEXT

2. type instance no OO,3. click on NEXT

4. click on NEXT


7. click on NEXT


10. click on NEXT

11. click on NEXT

12. type LOCATION OF KERNEL CD E:\46cides\kernel

8/7/2019 sap4.7


13. click on NEXT

14. password AAA

AAA15. click on NEXT

16. password AAA


18. select NO LDAP SUPPORTS


21. click on NEXT

22. click on NEXT

23. click on EXIT when finished

DATA BASE INSTANCE

Startà programsà SAP set up system for INDà install database instance



5. click on NEXT

6. click on NEXT


9. click on NEXT


12. click on NEXT


15. click on NEXT

16. type location of CDS for KERNEL : E:\ 46cides\KERNELfor EXPORT : E:\DBEXPORT

17. click on NEXT

18. password AAA


20. click on NEXT


23. click on EXIT at 32%

24. log off 25. log in

26. user à ind adm

27. passwordà AAA

28. OK

8/7/2019 sap4.7


WINDOWS EXPLORERà C:\USERS\IND ADM\INSTALL\R3 SET UP FILE

1. double clik on R# set up file

2. select database R3S3. open

4. type pass word AAA

AAA5. click on NEXT

6. at 91% password AAA

AAA7. at 93% start MMC

8. click on NEXT

9. at 100% EXIT

10. click on STOP MMC11. restart system

POST INSTALLATION

E:\apgui320\gui\windows\win 32\setup(double click)1. click on NEXT

2. click on INSTALL3. click on FINISH

4. click on SAP logon

5. select NEW

6. type DESCRIPTION : 46CIDES7. type application server : 46CIDES

8. type system no : 00

9. start MMC

10. close MMC11. log in SAP

12. client 000, user sap* password 06071992

13. txn code SM2814. ENTER ( TO CHECK ERROR)

15. RESULT : NO ERROR REPORTED ( in installation)

STMSDescription à Student

Click on SAVE

Go to overviewà transport routesSelect display change mode (second icon)

Configurationàstandard configurationà single system ( main menu)

Click on Enter Configurationàdistributeàactivate

Click on Enter

F3 (to go back)

8/7/2019 sap4.7


RZ 10

Utilitiesà import profiles of active servers

Click on Enter Click on F3 (to go back)

Profile click on F4

Select INDà DVEMGS00à46CIDESSelect EXTEND MAINTà change

Select create paramaeters9 icon)

Type paramter name : rdisp/max-wprun-timeType parameter value ; 3000

Copy icon

Go back

Click Yes

CREATE PARAMETER

Paramater name : abap\ field exit

Value ; YESSelect COPY icon, go back à YES

Create parameter : login/system-client

: 800

select copy iconàgo back à yes

create parameter :eu/iwb/installed/languages

:EN

select COPY icon go back à YESagain go back

click on YES

click on SAVEclick on YES

click on ENTER

click on ENTER

(USER CREATION)

TXN : SU01

user : sapuser select : create icon

address logon datatitle go on clicking ENTER no of times

first name initial password : abc

last name repeat pass word : abc

DEFAULTS

Logon language : En

Output device ; LP01

8/7/2019 sap4.7


Select : Out put immediately & decimal

PROFILESType 1. SAP ALL

TYPE 2. SAP NEW

SAVELog off from SAP

Login to SAP

type user : sapuser password : abc

new password : abap

repeat password : abap

txn : SALE

IMGàerror handlingàbasic work flow settings

Select AUTOMATIC CUSTOMIZING icon

Go back Txn 00w4

Select DISPLAY CHANGE MODE iconCreate icon

CREATE

Prefix no 978System ID IND

Client 000

Click on SaveLocal object

Cancel X

CREATE

Prefix no 972System ID IND

Client 800

Click on Save

Local objectCancel X

TXN SE 38

Program name : Z FIRST

CREATEACCESS KEY : 36687663221261278694

TITLE : DEMO

TYPE : EXECUTOR

Click on SAVE

8/7/2019 sap4.7


LOCAL OBJECT

Log off from SAPLog into SAP

Client : 800

User : sapPass word : 06071992

RUN txn SU01 for 000 client

Log off from SAP

Log into SAPClient : 800

User : sap

Pass word : abc

Click on ENTER Enter new password : abap

Logoff Stop MMC

Installation Of SAP 4.6b

System Requirements.

P-III System1024 MB or 512 MB RAM

Minimum 60GB HDD

40 GB Hdd (2GB for WinNT & 38 GB for oracle & SAP)10 GB Hdd for CD dumps.

CDROM drive.

Network Card

C:\ - 10GB - Windows 2000 Server - NTFS

D:\ - 40GB - Oracle & SAP - NTFS

E:\ - 10GB - CD Dumps - NTFSF:\ - CDROM Drive

Install Windows 2000 server in first 10GB partition

Computer Name - SAPSRV

IP Address - 192.168.1.2Subnet Mask - 255.255.255.0

8/7/2019 sap4.7


Work Group - TEKSOFT

Complete the installation & Restart.

Install Service Pack 3

Install All the Drivers

Install IE6 SP1

Create two Users as mentioned bellow

Start -> Programs -> Administrative Tools -> Computer Management -> Local

Users

and Groups -> Users -> New User

a. First user name TEKADM

Give password, disable the already enabled option & enable

"Password Never Expires & user cannot change the password option "

b. Second user name SAPServiceTEK

Give password, disable the already enabled option & enable"Password Never Expires & user cannot change the password option "

Add the two Users to Administrators Group

Change hostfile

Open C:\Winnt\System32\driver\ect\host file in Notepad & add IP Address and Computer Name in

The bottom of file. Save & Exit.

Change the Virtual Memory

C: Min - 512MB

Max - 1024MB

D: Min - 2048MBMax - 2560MB

Change the File and Printer sharing properties to “ Maximize through

Logon as TEKADM

Insert SAP-Oracle CD &Select F:\NT\i386\setup & click enter

Location of oracle D:\orant & click enter

Accept path change & click enter

Oracle 8 enterprise edition & click enter

8/7/2019 sap4.7


(Oracle 8.1.7 will not be supported by SAP Kernel 4.6B)

(Oracle 8.1.7 will be supported by SAP Kernel 4.6C only)

After completion of oracle Stop the service "Oracle TNSlistner 80"

Select F:\NT\i386\Patchs\8.0.5.2.2\setup & click enter

Accept the defaults & complete the installation.Restart the system.

Dump all the export CDs (6 CDs) intoE:\dump\db1 - export CD 1

E:\dump\db2 - export CD 2

E:\dump\db3 - export CD 3 (To dump type as E:\dump\db1>Xcopy /e f: & enter)

E:\dump\db4 - export CD 4E:\dump\db5 - export CD 5

E:\dump\db6 - export CD 6

Insert Kernel CD

Select F:\46bker\NT\i386\NTPATCH\R3dllins & click enter This will install patch for NT.

Restart the system.

Logon as TEKADMFrom kernel CD

F:\NT\common\r3setup & enter

Enter the following

System Name - TEK (must be 3 Letters Capital)

Location - C:\users\Tekadm\install (it comes by default)Accept to restart the machine.

Logon on as TEKADM

Copy the file "db_ides.r3s" from DB1\IDES\NT\ORA\DB_IDES.R3S(18KB files size) to C:\users\tekadm\install

Start r3setup fromC:\users\tekadm\install\r3setup & enter

Select "central.r3s" file & enter

& Follow as mentioned bellow

System Name - TEK

Instance no. - 00

Accept Defaults

8/7/2019 sap4.7


Directory of SAP system -change to D:

RAM of the sys. - Accept the default

Location of the KERNEL CD - F:Port no. - 3600

Enter the password of TEKADM two times

Enter the password of SAPServiceTEK two timesStart the installation.

This will come upto

Select C:\users\tekadm\install\r3setup & enter

Select "db_ides.r3s" & enter

System Name - TEK

Instance no. - 00Accept Defaults

Select WE8DEC (default for r/3 4.x system) & enter

Oracle dir. - D:

Location of SAP Database specific files

SAP Database Drive

SAPARCH D

SAPBACKUP DSAPCHECK D

SAPREORG D

SAPTRACE D & enter

Location of Oracle Data files

Oracle Data directory drive

SAPDATA1 D

SAPDATA2 D

SAPDATA3 D

SAPDATA4 DSAPDATA5 D

SAPDATA6 D & enter

Location Database LOG files

Dir. for LOG files Drive

ORIGLOGA D

ORIGLOGB D & enter

8/7/2019 sap4.7


Location Mirrored Database LOG files(Change from D to C)

Dir. for LOG files Drive

MIRRLOGA C

MIRRLOGB C & enter

Accept the default RAM & enter

Location of export CDs dump

CD name Location Copy destination

KERNEL F:\46bker EXPORT1 E:\dump\db1\1

EXPORT2 E:\dump\db2\2EXPORT3 E:\dump\db3\3

EXPORT4 E:\dump\db4\4 (Clear this field)

EXPORT5 E:\dump\db5\5

EXPORT6 E:\dump\db6\6 & enter

Enter the Password of TEKADM No. of parallel process - 1

Start installation.

Wait for 14 to 15 Hrs & installation will come Upto 91% & will ask for SAPr3 password.

Enter the password of TEKADM & enter

This will come upto 95%

Open SAP Management Console from desktop & Right click "TEK" & start the service.

Wait for the service to start & will change from yellow to green.Come to the r3setup screen & click next.

This will bring upto 100% & the installation is over.

Exit the r3setup & stop the "TEK"service & Restart the system.

POST INSTALLATION TASKS

After SAP installation, install SAPGUI in the server. (CD 9)

Restart the system

8/7/2019 sap4.7


Open SAP Management Console & start the sap service.

Start the Sap Frontend from the start\programs\sap frontend\sapsrv.

Logon as

Client 000User name DDIC

Password 19920706Language en

* Note : Clear this field

This means if you already have the CD's copied on the the harddrive you don't need to

copy them again..CD Title------CD Location-----------CD copy to this location

kernel--------Dump location1-------clear , don't re copy

cd1-----------Dump2--------- -------clear, this field

cd2-----------........3-----------------clear cd3-----------.........4----------------clear

Documents

sap4.7