Upload
duongdang
View
265
Download
4
Embed Size (px)
Citation preview
CURRICULUM VITAE
SANY IZAN IHSAN
Home Address: 3 Raelene Place, Massey Auckland 0614 Mobile: +64 21 0830 6478
Permanent Address: 66 Jalan Selaseh 20, Taman Selaseh 2, 68100 Batu Caves, Selangor, Malaysia
Mobile: +60 19 314 7172
Education: International Islamic University Malaysia, IIUM Gombak PhD (Engineering), 2008 Thesis title: “Analysis of Semiactive Control Policies for Passenger Vehicles”
University of Tennessee, Knoxville, USA
MSc. (Aerospace Engineering), May 1999 CGPA: 3.55 Thesis title: “Numerical Investigation of Error Properties of Green’s Function
Discretization (GFD)”
University of Wisconsin, Madison, USA B.Sc. (Mechanical Engineering), May 1995 CGPA: 3.288
Job Experience: Program Leader, Diploma in Mechanical Engineering (Level 7), Department of
Engineering, International College of Auckland (2017 – present), teaching and manage student admission, course offering, laboratories and academic staff.
Associate Professor (On Unpaid leave), Mechanical Engineering Department, Faculty of Engineering, International Islamic University Malaysia (2014 – 2016), teaching
Engineering Mechanics, Linear Algebra, Control Systems, Vehicle Dynamics, Thermo-fluids, Thermodynamics and Mechanical Vibrations.
Deputy Director, Office of Institutional and Academic Quality Management (OQM), 2016.
Director, Academic and Student Management Division, IIUM Centre for Strategic Continuing Education and Training (IIUM CRESCENT), 2015 - 2016.
Deputy Chief Executive Officer (Academic), International Islamic College (IIC),
2014 – 2015. On secondment.
Assistant Professor, Mechanical Engineering Department, Faculty of Engineering, International Islamic University Malaysia (2008 – 2014), teaching Engineering
Mechanics, Linear Algebra, Control Systems, Vehicle Dynamics, Thermofluids and Mechanical Vibrations.
Deputy Dean (Academic Affairs), Kulliyyah of Engineering, International Islamic University Malaysia (2009 – 2012)
Deputy Director (Training and Education), Advanced Engineering and Innovation
Centre, International Islamic University Malaysia (2008 – 2009) Lecturer, Faculty of Engineering, International Islamic University Malaysia (1999 –
2008), taught Engineering Mechanics, Linear Algebra, Control Systems, Vehicle Dynamics and Engineering Design.
Deputy Dean (Student Affairs), Kulliyyah of Engineering, International Islamic University Malaysia (2001 – 2003)
Research Assistant, University of Tennessee Space Institute (1997 – 1999). Research
in Green’s Function Discretization for Computational AeroAcoustic. Assistant Lecturer, Kulliyyah of Engineering, IIUM, (1996 – 1999)
Associate Engineer, Esso Production Malaysia Inc., (1995 – 1996)
Other Work Experience: Member, IIUM Teaching and Learning Committee, IIUM (2012 - present)
Member, IIUM Academic Quality Compliance Committee (Nov. 2011 – Dec 2014)
Member, Committee for MS ISO/IEC 17025 Certification Project, Kulliyyah of Engineering, IIUM, 2011
Member, Board of Advisors, Advanced Engineering and Innovation Centre,
International Islamic University Malaysia (2010 – 2012) Member, Board of Studies, Kulliyyah of Engineering, IIUM, 2000 for the following
programmes: Bachelor of Engineering (Bioengineering) (Honours)
Bachelor of Engineering (Nuclear and Energy) (Honours) Bachelor of Engineering (Civil-urban) (Honours) Bachelor of Engineering (Mechanical) (Honours)
Bachelor of Engineering (Aerospace) (Honours)
Member, Assessment Enhancement Committee, Kulliyyah of Engineering, International Islamic University Malaysia (2008 – 2009)
Reviewer, Journal of the Mechanical Engineering Science, 2007 - present
Assistant Editor, IIUM Engineering Journal, Faculty of Engineering, IIUM (2004 –
2005)
Member, Secretariat, IPTA Consortium for National Satellite Project (2003 – 2006)
Consultancy Experience: Module Developer and Instructor, Training for Trainer on Outcome-based Education
(OBE), Center for Professional Development, IIUM, 2014.
Member, Vetting Panel for Mechanical Engineering Program Subject, Technical Matriculation Centre, Matriculation Division, Ministry of Education Malaysia, 2009, 2011, 2013, 2014.
Member, Vetting Panel for Engineering Program Subject, Technical Matriculation
Centre, Matriculation Division, Ministry of Education Malaysia, 2010, 2011, 2013. Panel Member, Curriculum Review, Engineering Matriculation Program, Technical
Matriculation Centre, Matriculation Division, Ministry of Education Malaysia, Selesa Beach Resort, Port Dickson, 9 - 12 April 2013.
Member, Interview Panel, Royal Highness Scholarship Program, Malaysia Civil Servant Department (JPA), 2009, 2011.
Member, Interview Panel, Oversea Degree Scholarship Program (PILN), Malaysia
Civil Servant Department (JPA), 2009, 2011. Module Developer and Instructor, Workshop on Outcome-based Education (OBE)
Practice at Kulliyyah of Engineering, Advanced Engineering and Innovation Centre (AEIC), IIUM, 6th and 27th July 2011.
Module Developer and Instructor, Half-day Workshop on Outcome-based Education (OBE) Practice at Kulliyyah of Engineering, Advanced Engineering and Innovation
Centre (AEIC), IIUM, 24th and 25th May 2011.
Member, Kajian Halatuju Bidang Automotif (Automotive Area Roadmap Study), Jabatan Pengajian Tinggi (Ministry of Higher Education Malaysia), 2010
Panel Member, Workshop on Support Materials Development for Mechanical Engineering Technical Program, Matriculation Division, Ministry of Education
Malaysia, 2009. Panel Member, Workshop on Detail Syllabus for Mechanical Engineering Technical
Program, Matriculation Division, Ministry of Education Malaysia, 2009.
Panel Member, Workshop on Enginering/Technical Program Curriculum Development Workshop – Mechanical Engineering Working Group, Matriculation Division, Ministry of Education Malaysia, Hotel Impiana Casuarina, Ipoh, 24-26
November 2008.
Facilitator, Special Workshop and Brainstorming Session on Student Assessment (for
Kulliyyah of Engineering Top Management and Senior Lecturers), La Paris International Hotel and Resort, Port Dickson, 8 – 10 August 2008.
Books: Sany Ihsan, “Semiactive Control Policies: Ride Analysis for Passenger Vehicles”, Lambert Academic Publishing, ISBN: 978-3-8443-8417-8, 2011
Waleed, F. Faris and Sany, I. Ihsan, “First Course in Control Systems”, IIUM Press,
ISBN: 978-983-3855-65-0, 2009
Book Chapters: 1. Abdi O. Shuriye, Mohamed H. Hassan and Waleed F. Faris (Ed.), “Muslims’
Contributions in Science and Technology with Critical Analysis on Present and Future Directions”, Islamic Engineering Ethics: Foundation Integration and
Practice, Future Text Publication, Malaysia, pp. 27-41, 2006.
Latest Journal Publications: 1. Fouad R.H. Abdeen, Maizirwan Mel, Mohammed Saedi Jami, Sany Izan Ihsan
and Ahmad Faris Ismail, “A review of chemical absorption of carbon dioxide for biogas upgrading”, Chinese Journal of Chemical Engineering, Vol.24, Issue 5,
2016, in Press.
2. Maizirwan Mel, Nadiah Mohd Suhuli, Avicenna, Sany Izan Ihsan, Ahmad Faris
Ismail, and Sarifah Yaacob, “Effect of Organic Loading Rate (OLR) of Slurry On Biogas Production Quality”, Advanced Materials Research Vol. 1115, 2015, pp.
325-330.
3. Avicenna, Maizirwan Mel, Sany Izan Ihsan, Roy Hendroko Setyobudi, “Process
Improvement of Biogas Production from Anaerobic Co-digestion of Cow Dung and Corn Husk”, Procedia Chemistry, Vol. 14, 2015, pp. 91 – 100.
4. Maizirwan Mel, Ariff Syamin Hisham Yong, Avicenna, Sany Izan Ihsan, Roy
Hendroko Setyobudi, “Simulation Study for Economic Analysis of Biogas
Production from Agricultural Biomass”, Energy Procedia, Vol. 65, 2015, pp. 204–214.
5. Zohir BenLahcene, Waleed F. Faris, Sany Izan Ihsan, Fadly Jashi Darsivan,
“Optimisation and control of semi–active suspension using genetic algorithm for
off–road full vehicle”, International Journal of Vehicle Systems Modelling and Testing, Vol. 9, Nos. 3/4, 2014, pp. 372-382.
6. Ahmad Fadzil Ahmad Shuhaili, Sany Izan Ihsan and Waleed Fekry Faris, “Air
Pollution Study of Vehicles Emission In High Volume Traffic: Selangor,
Malaysia As A Case Study”, WSEAS Trans. on Systems, Issue 2, Volume 12, February 2013, pp. 67-84.
7. S.N. Syed Abu Bakar, Mostafa M. Abdalla, Waleed F. Faris and Sany Izan Ihsan,
“Axisymmetric vibration analysis of isotropic circular plate with attached annular piezoceramic plate”, Int. J. Vehicle Noise and Vibration, Vol. 8, No. 4, 2012, pp. 302-317.
8. Benlahcene, Z., Faris, W., & Ihsan, S. (2011). Analysis and simulation of semi-
active suspension control policies for two-axle off-road vehicle using full model. Int. J. Vehicle Systems Modelling and Testing, Vol. 6, Nos. 3/4, pp. 219-231.
9. Zuraida Ahmad, Ahmad Faris Ismail, Amir Akramin Shafie, Sany Izan Ihsan, Zahurin Halim, Souad A.M. Albat'Hi (2011). Islamisation of engineering
education in International Islamic University Malaysia (IIUM): problems and prospect. Revelation and Science, Vol. 1, Nos 3, pp. 131-137.
10. Ataur Rahman, A.K.M. Mohiuddin and Sany Izan Ihsan, “A Study on automated Traction Control System of an Electrical Golf Car”, Int. J. Electrical and Hybrid
Vehicles, Vol. 3, No. 1, 2011, pp. 47-61.
11. Faris, W., Benlahcene, Z., & Ihsan, S. (2010). Assessment of different semi-active
control strategies on the performance of off-road vehicle suspension systems. Int. J. Vehicle Systems Modelling and Testing, Vol. 5, Nos. 2/3, pp. 254-271.
Latest Refereed Conference Publications: 1. R. Mizanur, M. M. Rashid, A. Rahman, A. H. M. Zahirul Alam, S. Ihsan and M.
S. Mollik, “Analysis of the internal temperature of the cells in a battery pack
during SOC balancing”, International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), IIUM, 25-27 June 2016.
2. Ataur Rahman, Sazzad Sharif, Mohiuddin AKM, Ahmed Faris Ismail, Sany Ihsan
Izan, “Intelligent Control Electromagnetic Actuated Continuously Variable
Transmission System for Passenger Car”, International Conference on Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), IIUM,
25-27 June 2016. 3. Ataur Rahman, Mohiuddin AKM, Hawlader MNA, Sany Ihsan, “HYBRID
ENGINE POWERED CITY CAR: Fuzzy Controlled Approach”, International Conference on Mechanical, Automotive and Aerospace Engineering
2016 (ICMAAE '16), IIUM, 25-27 June 2016. 4. Mohiuddin A K M, Mohamad Syabil Sabarudin, Ahsan Ali Khan, Sany Izan
Ihsan, “Design and development of hybrid energy generator (photovoltaics) with solar tracker”, International Conference on Mechanical, Automotive and
Aerospace Engineering 2016 (ICMAAE '16), IIUM, 25-27 June 2016. 5. Sany Izan Ihsan, M. A. Iskandar M. Safian and M. Aliff M. Taufek,
“Improvement Design of Parabolic Trough”, International Conference on
Mechanical, Automotive and Aerospace Engineering 2016 (ICMAAE '16), IIUM, 25-27 June 2016.
6. Maizirwan Mel, Wan NoorLaili Wan Muda, Sany Izan Ihsan, Ahmad Faris
Ismail, and Sarifah Yaacob, “Purification Of Biogas By Absorption into Calcium Hydroxide Ca(OH)2 Solution”, Persidangan Kebangsaan Kedua Program Pemindahan Ilmu Kedua (KTP02), Hotel Marriott, Putrajaya, 9-11 September
2014.
7. Baradey, Y. and Hawlader, Mohammad Nurul Alam and Idres, Moumen and Ihsan, Sany Izan (2014) Improving the efficiency of poly-crystalline photovoltaic module using special transparent glass covers. International Meeting on Advances
in Thermofluids, Swiss Garden Hotel & Residences, Kuala Lumpur, 26-27 November 2014.
8. Ahmad Fadzil Ahmad Shuhaili, Sany Izan Ihsan, Waleed Fekry Faris, “Vehicles
Emission Study in High Volume Traffic at Selangor”, International Conference
on Automotive Innovation & Green Energy Vehicle (AiGEV2014), Kuantan, 26 – 27 August 2014.
9. Avicenna, Maizirwan Mel, Sany Izan Ihsan, Roy Hendroko Setyobudi, “Process
Improvement of Biogas Production from Anaerobic Co-digestion of Cow Dung
and Corn Husk”, The 3rd Indonesia EBTKE-ConEx, Jakarta, 4–6 June 2014.
10. Maizirwan Mel, Ariff Syamin, Hisham Yong, Avicenna, Sany Izan Ihsan, Roy Hendroko Setyobudi, “Simulation Study for Economic Analysis of Biogas Production from Agricultural Biomass”, The 3rd Indonesia EBTKE-ConEx,
Jakarta, 4–6 June 2014.
11. Sany Izan Ihsan, Meftah Hrairi and Othman O. Khalifa, “Course Continual Quality Improvement (CQI) Implementation Of Outcome-Based Education (OBE) In Engineering Education: The Kulliyyah Of Engineering, IIUM
Experience”, International Conference on Engineering Education 2013, Madinah, KSA, 22 – 25 Dec 2013.
12. Avicenna, Maizirwan Mel, Izan Sany, Ihsan, Muhammad Zulkhairi, Mohd Rodzi,
Sarifah Yaacob, “Initial Bio-methane Production by Co-digestion of Fruit and
Vegetable Wastes”, International Conference on Chemical Engineering and Industrial Biotechnology-ICCEIB 2013, Kuantan Malaysia; 28-29 August 2013.
13. Baradey, Y. and Hawlader, Mohammad Nurul Alam and Idres, Moumen and
Ihsan, Sany Izan. Performance evaluation of PV module using water filters and
infrared reflective glass covers, International Conference on Mechanical, Industrial and Materials Engineering 2013 (ICMIME2013), Rajshahi, Bangladesh,
1-3 November 2013. 14. Raed Kafafy, Abdulhakeem Javeed, Sany Izan Ihsan and Moumen Idres,
“Experimental Investigation of the Performance of Flutter-Based Microgenerators”, 11th International Energy Conversion Engineering Conference,
15-17 July 2013, San Jose, CA, USA.
15. BenLahcene Zohir, Sany Izan Ihsan, Waleed Faris and Fadly Jashi Darsivan
Ridhuan, “Optimization and Control of Semi-active Suspension Using Genetic Algorithm for Off-road Full Vehicle”, The 2nd International Conference on
Mechanical, Automotive and Aerospace Engineering 2013 (ICMAAE’ 13), 2-4 July 2013, Berjaya Times Square, Kuala Lumpur, Malaysia.
Presentations: Hands-on Workshop On Outcome-Based Education (OBE) And Course Outline Data Entry To E-CURE System, Kulliyyah of ICT, IIUM, 26 May 2016
Workshop on The Process Flow to Review Academic Programme, Kulliyyah of Architecture and Environmental Design, IIUM, 23 March 2016
“Outcome-based Education”, Ta’aruf and Intelectual Discourse 45 (TIDE 45), IIUM,
1st – 4th September 2015. Workshop on Developing Module for Training of Trainers for OBE and SLT, Centre
for Professional Development (CPD), IIUM, in Kuantan, 7th – 8th April 2014 and in Gombak, 7th – 8th May 2014
Workshop on Outcome-based Education (OBE) Practice at Kulliyyah of Engineering, Advanced Engineering and Innovation Centre (AEIC), IIUM, 6th and 27th July 2011.
Half-day Workshop on Outcome-based Education (OBE) Practice at Kulliyyah of
Engineering, Advanced Engineering and Innovation Centre (AEIC), IIUM, 24 th and 25th May 2011.
“Understanding Learning”, Islamic Enhancement and Evaluation Program 2010 (IEEP2010) Part 2, Gambang Resort City, Kuantan, 11 December 2010.
“KOE Programme Outcomes and Learning Outcomes”, Islamic Enhancement and Evaluation Program 2010 (IEEP2010) Part 1, Kelab Darul Ehsan, Ampang, 23 July
2010.
“In-House Training on MS Application for Effective Teaching”, Kulliyyah of Engineering, IIUM Gombak, 19 February 2004
Postgraduate Student Supervision: Co-supervisor, PhD in Biotechnology Engineering, “Development of Biogas Purification for Power Generation by Chemical Absorption” by Fouad R.H Abdeen,
On going. Co-supervisor, PhD in Engineerinng, “Analysis Of Circular Plate With Tunable
Frequency” by Syed Noh Bin Syed Abu Bakar, Completed 2015.
Co-supervisor, M.Sc in Computer and Information Engineering, “Adaptive LiFePO4 Cell Equalization Circuit for Application in Electric Vehicles (EV)” by Md. Mizanur
Rahman (G1212553), Completed 2015.
Co-supervisor, M.Sc in Biotechnology Engineering, “Biogas Production from Anaerobic Co-Digestion of Biomass Residues” by Avicenna (G1119261), Completed 2015.
Co-supervisor, M.Sc in Mechanical Engineering, “Theoretical and Experimental
Analysis of Flutter-based Wind Microgenerators” by Abdul Hakim Javid (G1117939), Completed 2014.
Supervisor, M.Sc in Automotive Engineering, “Study of Air Pollution Emission by Moving Vehicle in Highly Polluted Area” by Ahmad Fadzil Ahmad Shuhaili
(G0926965), Completed 2014. Co-supervisor, PhD in Engineerinng, “Optimization and Control of Semi-active
Suspension for Off-road Vehicles” by Zohir Ben Lahcene (G1014741), Completed 2014.
Co-supervisor, M.Sc in Automotive Engineering, “A Study on Aftermarket voltage stabilizer for its performance and emission on passengers vehicles” by Noor Azzami
bin Abdul, Completed 2012.
Latest Undergraduate Student Supervision: 1. Final Year Project: “Design and development of local Jet fuel Bowser” by
Mohamad Afdzal Faiz Mohamad Akhiar (1122605). On going.
2. Final Year Project: “Study on Energy Harvesting Improvement on PV using
Water Filter” by Hafizuddin Mohamed Lazim (1124167). On going.
3. Final Year Project: “Study on Concentrated Solar PV System” by Djalaal Lont
(1033057). Completed 2017.
4. 5. Final Year Project: “Design of Motorcycle Conversion Kit for Biogas Fuel
System” by Hasnoon Ataa Mohammed (1114913). Completed 2017.
6. Final Year Project: “Design of Closed System of Parabolic Trough Solar Thermal
Collector” by Muhammad Hafiz Ikram Mohd Zi Izani (1216047). Completed 2017.
7. Final Year Project: “Low Temperature Power Generation using ORC” by Sarah Shamila Rosili (1111138). Completed 2016.
8. Final Year Project: “Low Temperature Power Generation using Sterling Cycle” by
Mohamad Faiz Khoiruzi (1219597). Completed 2016
9. Final Year Project: “Study on Energy Harvesting Improvement on Using Fluids Filter On Photovoltaic”. Muhamad Irfan Mat Seman (1125075). Completed 2016
10. Final Year Project: “Improvement Design of Parabolic Trough”. Mohamad Ariff
Iskandar Mohamad Safian (1126315). Completed 2016.
11. Final Year Project: “Study on the effect of Dust on Parabolic Trough
Performance” by Noor Haiza Abdullah (1118508), Completed 2015.
12. Final Year Project: “Integrated Solar System and Air-Con Heat Waste Performance Analysis” by Mohd Hafizuddin Abdul Rasid (1029219), Completed 2015.
External Programme Assessor: Evaluation Panel for Malaysian Qualification Agency (MQA) in Mechanical Engineering Programme, 2013 - present
External Assessor, Diploma in Mechanical Engineering, HELP College of Art and Technology, 2012-2014
Academic Awards: 2008 Best Student (Academic) for Doctor of Philosophy (Engineering), 24th
IIUM Convocation
2003 – 2007 Skim Latihan Bumiputra (SLAB) for PhD. study. 1996 – 1999 Skim Latihan Bumiputra (SLAB) for MSc. study.
1992 – 1995 JPA Scholarship for Oversea studies. 1993 Buske Engineering Scholarship Award for academic achievement. 1992 – 1993 Three times Deans Honor List.
Research Interests: Noise, Vibration and Harshness
Vehicle Dynamics Ride Quality Renewable Energy
Solar and thermal Energy Engineering Education
Latest Research Grants: 1. Knowledge Transfer Program (KTP15-012-0013), “Upgrading Biomethaneas
Low Carbon Fuel for Motorbike”, with Dr. Maizirwan Mel (Principal), Prof. Amir
Akramin Shafie and Prof. Dr. Md Noor Salleh. February 2015. On going.
2. Fundamental Research Grant Scheme (FRGS15-231-0472), “Parametric Optimization of a Parallel Hybrid Electric Vehicle Powertrain with a Battery-
Supercapacitor Energy Storage System”, with Dr. Moumen Mohammed Mahmoud Idres (Principal), Dr. Kassim Abdulrahman Abdullah, Mohamed
Okasha and Mohd Sultan Ibrahim Shaik Dawood. February 2015. On going. 3. Fundamental Research Grant Scheme (FRGS14-128-0369), “Damage
Identification of Imperfect Adhesively Bonded Structural Joint using Modal Analysis”, with Dr. Irfan Hilmy (Principal), Prof. Erry Yulian Triblas Adesta and
Dr. Tasnim Firdaus Mohamed Ariff. January 2014. On going. 4. MyRA Incentive Research Grant Scheme (MIRGS13-02-001-0003),
“Development of Green Transportation System”, with Prof. Dr. Md Ataur Rahman (Principal), Prof. Emeritus Dato’ Wira Ir. Dr. Mohd Noor Salleh, Dr.
Meftah Hrairi, Prof. Dr. Waqar Asrar, Prof. Dr. M N A Hawlader, Prof. Dr. Zahirul Alam, Dr. Kassim Abdullah, Dr. Fadly Jashi Darsivan, Dr. Muhammad Mahbubur Rashid and Dr. Rafia Afroz. October 2013. On going.
5. Fundamental Research Grant Scheme (FRGS13-020-0261), “Hybrid Singularly
Implicit-Explicit Kernal Function Method for Unsteady Aerodynamic Analysis of Multiple Infering Aeroelastic Lifting Surfaces” with Dr. Erwin Sulaeman (Principal), Prof. Dr. Waqar Asrar, Dr. Ari Legowo and Dr. Mohd Sultan Ibrahim.
March 2013. On going.
6. Fundamental Research Grant Scheme (FRGS13-022-0263), “Development of New Child Restraint System (CRS) Design Parameters for Lateral Side Impact using Particle Swarm Algorithm (PSA)” with Dr. Qasim H Shah (Principal), Dr.
Wong Shaw Voon and Shasthri A/L Sivaguru. March 2013. Completed.
7. Research Acculturation Grant Scheme (RAGS12-007-0007), “Energy Harvesting and Conservation Through an Integrated Solar Heat Pump System for Space Cooling, Water and Air Heating”, with Prof. Dr. M N A Hawlader. December
2012. Completed Feb 2016.
8. Research Matching Grant Scheme (RMGS12-010-0023), “Development of Electric Vehicle by Converting Proton Saga Conventional Car”, with Assoc. Prof. Dr. Md Ataur Rahman (Principal), Prof. Dr. Waqar Asrar, Prof. Dr. M N A
Hawlader, Prof. Dr. Zahirul Alam, Dr. Kassim Abdullah and Dr. Muhammad Mahbubur Rashid. March 2012. Completed 2014.
9. IIUM Research Endowment Grant – Type B (EDW A10-126-0673),
“Development of Teaching Assistant Management System for Kulliyyah of
Engineering”, with Athaur Rahman Najeeb (Principal). June 2012. Completed 2015.
10. IIUM Research Endowment Grant – Type B (EDW B11-103-0581), “RU 2011:
Enhanced Solar Energy Harvesting Method Through An Integrated Solar Thermal
and PV System”, with Prof. Dr. M N A Hawlader (Principal). November 2011. Completed 2014.
Professional Society: Board of Engineers, Malaysia (BEM) Society of Automotive Engineers (SAE), 2006 - present
Malaysian Society for Engineering and Technology (MySET), 2008 - present
Selected Seminar Attended: 5-day Train the Trainer for HRDF certification by Brownland HResources Sdn Bhd., 4 – 9 October 2016, International Institute for Halal Research and Training (INHART), IIUM
3-day Intensive Lead Trainer Course on Outcome Based by mSET and EAD, 26-28
March 2011, Marriott Putrajaya. Workshop on Training for Master Trainers - Understanding Learning, 8 – 11
November 2010, Concorde Hotel, Shah Alam
2-day Intensive Workshop on Submission to Engineering Accreditation Council (EAC), 13-14 January 2010, Putrajaya Marriot Hotel
Learning Outcome & Kemahiran Insaniah (LOKI) Workshop, 17 December 2009, IIUM, Gombak
Workshop on EAC Lead Trainer Organized by the Engineering Accreditation Council, Board of Engineers Malaysia, Kuala Lumpur, 18 – 20 November, 2007
2nd ABET International Faculty Workshop for Continuous Program Improvement,
National University of Singapore, Singapore, December 2003 Engineering Bachelor degree accreditation workshop, by Quality Assurance Division,
KPM and IPTA Engineering Deans Council, Concorde Hotel, Kuala Lumpur, 2002.
Workshop on Accreditation of Engineering Degree, Kuala Lumpur, May 2002
Teaching Experience: Control Systems (Since 2007)
Engineering Mechanics – Dynamics (Since 2007) Engineering Mechanics – Statics (Since 1999)
Linear Algebra (2001) Mechanical Vibrations (Since 2012) Noise Control (Since 2012)
Thermodynamics (Since 2014) Thermo-fluids (2011)
Vehicle Dynamics (Since 2008)
Reference Contact Information
Dr. Sany Izan Ihsan
1. Dr. Hymie Latif
Senior Lecturer Otago Polytechnic Auckland International Campus
350 Queen Street Auckland
Tel: (+64) 210 251 3786 Tel: (+64) 9 309 0301 ext 828 Fax: (+64) 9 309 0302
Email: [email protected]
2. Dr. Norasieh Md Amin
Knowledge Specialist
Library and Learning Commons Academic Development Unitec Institute of Technology
139 Carrington Road, Mount Albert, Auckland 1025, New Zealand
Tel: (+64) 210 787 685
Tel: (+64) 9 815 4321 ext 8671 Email: [email protected]
3. Dr. Meftah Hrairi
Professor, Mechanical Engineering Department Kulliyyah (Faculty) of Engineering
International Islamic University Malaysia Jalan Gombak, 53100 Kuala Lumpur,
Malaysia
Tel: (+603) 6196 4590/4581 Fax: (+603) 6196 4455 Email: [email protected]
4. Dr. Waleed Fekry Faris
Director,
International Institute of Muslim Unity, International Islamic University Malaysia
Gombak, Kuala Lumpur, 53100 Malaysia Professor,
Mechanical Engineering Department Kulliyyah (Faculty) of Engineering
International Islamic University Malaysia Jalan Gombak, 53100 Kuala Lumpur, Malaysia
Tel: +603-6196 5858
Fax: +603-6196 4852
Tel: (+603) 6196 4589
Fax: (+603) 6196 4455 Email: [email protected]