Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
santa’s workshopHow to by Edge Marquez(@ popp3d)
CUT AROUND OR
CUT CUT SHAPE OUT
WHAT YOU NEED:A pair of scissors or craft knife or any cutting tool that you have. Glue. Any scoring tool.
And to print out the template in cardstock or any paper thicker than normal copier paper(at least 160gsm)
MOUNTAIN FOLD
VALLEY FOLD
cover acover b
santa
elf
baseglue elf
here
glue santa here
a
b
glue a here
glue a here
glue b here
glue b here
1. Cut and score/fold all pieces
2. Glue cover(a&b) each side of the baseof the card(back side of each fold).
align each corner and edges
do the same on the other side
what card looks like when closed
align each corner and edges while glue it down
what it looks like
3. after gluing the covers, open the card again and glue a and b onto the base
4. After gluing a and b to the base. Get the elf and santa pieces and glue them to a and be respectively
what it looks like
align those corners while gluing it
down(make sure no gray area is showing)