Products Used

Bisque

MB-1117 - Casualware Charger Plate

Color

FN-001 - White

SC-2 - Melon-Choly

SC-15 - Tuxedo

SC-16 - Cotton Tail

SC-20 - Birthday SuitSC-27 - Sour Apple

SC-36 - Irish Luck

SC-55 - Yella Bout It

SC-60 - Silver Lining

SC-65 - Peri-TwinkleSC-73 - Candy Apple Red

SC-74 - Hot Tamale

Decorating Accessories

AC-230 - Clay Carbon PaperBT-910 - Synthetic Sponges

CB-106 - #6 Script Liner

CB-110 - #10/0 LinerCB-604 - #4 Soft Fan

CB-618 - #8 Soft Fan

Additional Materials

Pencil

Stiff ToothbrushDownload Pattern: Santa

Project Info

Designer: Staff Artist

Skill Level: IntermediateTime: 3 hours

Santa Cookie Plate

Some Pepperidge Farm Milanos would be nice . . .

Instructions

1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any

dust.

2. Using a CB-618 #8 Soft Fan, apply 1 coat of FN-001 White to the entire front of plate and 3 coats to

back. Allow to dry.

3. With a pencil and AC-230 Clay Carbon Paper, trace the Santa Pattern on the plate.

4. Using a CB-604 #4 Soft Fan, apply 2 coats of SC-36 Irish Luck to sky area.

5. Using a CB-106 #6 Script Liner, apply 1 coat of SC-27 Sour Apple and SC-73 Candy Apple Red to

the stripes on the hat.

6. Using a CB-106 #6 Script Liner, apply 1 more coat of SC-27 Sour Apple to the hat stripes. Then while

wet, blend in SC-36 Irish Luck, 1 stripe at a time. Also on edges of the hat near the sky, brush in the SC-

36 Irish Luck and pull out into sky creating a rough edge.7. Using a CB-106 #6 Script Liner, apply 1 more coat of SC-73 Candy Apple Red. Then while wet blend

in SC-74 Hot Tamale 1 stripe at a time. Also on edges of the hat near the sky, brush SC-36 Irish Luck

into the SC-73 Candy Apple Red and pull into sky creating a rough edge.

8. Using a CB-106 #6 Script Liner, apply some SC-36 Irish Luck to the bottom edge of hat, strokingupwards by the white band. Let dry. Water down SC-36 Irish Luck and paint a line over the bottom edgeof hat.

9. Using a CB-106 #6 Script Liner, apply 2 coats of SC-20 Birthday Suit to the face area. Overlap someinto what will be white areas of the hat, beard, and mustache. While second coat is still wet brush watered

down SC-2 Melon Choly into the cheek and lip areas.10. Using a CB-604 #4 Soft Fan, apply 1 coat of SC-16 Cotton Tail to the ball and rim of hat, eyebrows,

mustache and beard.11. Glazing one area at a time, use a CB-604 #4 Soft Fan and apply 1 coat of SC-16 Cotton Tail to the ball

and rim of hat, eyebrows, mustache and beard. While it is wet, using a CB-106 #6 Script Liner, applywatered down SC-55 Yella Bout It, SC-65 Peri-Twinkle and SC-60 Silver Lining to create a little color,

toning and shadow in white areas.12. Using a CB-106 #6 Script Liner, apply a thin line of SC-36 Irish Luck between the stripes of colors of

the hat. Using a CB-110 #10/0 Liner apply some smaller, not continuous, lines with slightly watered down

SC-15 Tuxedo to same area.13. Using a CB-110 #10/0 Liner apply slightly watered down SC-15 Tuxedo in thin wispy lines around all

white areas, nose and mouth. Use full strength SC-15 Tuxedo and paint in eyes.14. Use a toothbrush to splatter SC-16 Cotton Tail onto the plate, primarily to the sky and hat

15. Using a CB-106 #6 Script Liner, apply 1 coat of SC-16 Cotton Tail to make stars and snowflakes. Letdry and apply a second coat.

16. Using a CB-106 #6 Script Liner, apply 1 coat of SC-16 Cotton Tail in dots around the stars. Use fullstrength SC-16 Cotton Tail close to the stars and water down white as you go out farther.

17. Allow to dry.18. Stilt and fire to shelf cone 06.

MB-1117Santa PatternPage 1 of 2

MB-1117Santa PatternPage 2 of 2