Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/Mechanical Engg.
Preamble: In the prevailing situation, difficulty is being faced by students in carrying out in-house training as
well as industrial training/ project. The present situation has forced most of us to work from home. As students
must complete the course requirement, SLIET, Longowal has though to give suitable exercise to cover the said
aspect of course. In this exercise, each student is expected to write a report in given format for the given
exercise. The report should be submitted in PDF format to designate email id in case submission does not fall
in the period of institute working, otherwise a bounded report is to be submitted to respective faculty
coordinator.
Exercise in lieu of In-house Training
ICD First Year Students: CAC-DME Sr, No. Exercise How to write
1. A. List the following for a Refrigeration and Air Conditioning Technician
i. Skills required. ii. Tools likely to be used. iii. Components likely to be used. iv. Instruments likely to used.
Suggested Sources of Information- a. CTS%20Instrument%20Mechanic_CTS_NSQF-5.pdf b. Curriculum for Refrigeration and Air conditioning
Mechanic Trade by Skill Development ministry, Government of India
c- https://berg-group.com/engineered-solutions/the- science-behind-refrigeration/ d.https://gmpua.com/CleanRoom/HVAC/Cooling/Handbook%20of%20Air%20Conditioning%20and%20Refrigeration.pdf
Report Writing – Give bullet points for each with possible applications of Tools, Components and Instruments
B. Explain anyone Cooling equipment used for the measurement purpose.
For example Refrigerator used for cooling, desert Cooler working concept, Concept of earthen pot for cooling water etc.
Suggested Sources of Information- a. https://www.youtube.com/watch?v=Uv3GfEQhtPE b. https://www.youtube.com/watch?v=eJz3yROoLwI c. Text Books
Report Writing –
Definition, Symbol, How to connect in circuit?, Different Types, Applications, Important specifications, Different Types of faults, Fault Diagnosis
C. Your idea of maintaining physical distance in a triple seated Hostel.
Suggested Sources of Information- a. https://www.cdc.gov/coronavirus/2019-
ncov/prevent-getting-sick/social-distancing.html
Report Writing – Identify touch points in room, corridor, Mess, Common Places Suggest methods to minimize the touch at least at five places
Guidelines for Report- Front page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name,
Institute Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report on 1A, B & C as
suggested above, each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/Mechanical Engg.
Exercise in lieu of In-house Training
ICD First Year Students: CWT-DME Sr, No. Exercise How to write
1. A. List the following for a welder i. Skills required. ii. Tools likely to be used. iii. Components likely to be used. iv. Instruments likely to used.
Suggested Sources of Information- a. CTS%20Instrument%20Mechanic_CTS_NSQF-5.pdf b. Curriculum for welding engineer Mechanic Trade
by Skill Development ministry, Government of India
c- https://www.youtube.com/watch?v=n_DuzHRZ4JI Report Writing – Give bullet points for each with possible applications of Tools, Components, and Instruments
B. Explain anyone welding process
For example, Types of Gas Welding, GMAW and its types, Welding Terminology, Welding positions
Suggested Sources of Information- d https://www.weldallmfg.com/resources/welding- terminology c. http://www.weldingtypes.net/tag/gas-welding/ d. https://www.wcwelding.com/welding-positions.html
e. https://drive.google.com/drive/folders/1POQFMT47AYfbr-wl0pmrHQl_-xtBn9v8 Report Writing –
Definition, Symbol, How to connect in circuit?, Different Types, Applications, Important specifications, Different Types of faults, Fault Diagnosis
C. Your idea of maintaining physical distance in a triple seated Hostel.
Suggested Sources of Information- a. https://www.cdc.gov/coronavirus/2019-
ncov/prevent-getting-sick/social-distancing.html
Report Writing – Identify touch points in room, corridor, Mess, Common Places Suggest methods to minimize the touch at least at five places
Guidelines for Report- Front page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name,
Institute Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report on 1A, B & C as
suggested above, each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/Mechanical Engg.
ICD First Year Students: CTD-DME Sr, No. Exercise How to write
1. A. List the following for a tool and die design technician
i. Skills required. ii. Tools likely to be used. iii. Components likely to be used. iv. Instruments likely to used .
Suggested Sources of Information- a. CTS%20Instrument%20Mechanic_CTS_NSQF-5.pdf b. Curriculum for tool and die design Mechanic Trade
By Skill Development ministry, Government of India c- Report Writing – Give bullet points for each with possible applications of Tools, Components and Instruments
B. Explain anyone tool kit equipment used for the machining purpose.
For example Different Types of Tools used, Tool’s Specifications
Suggested Sources of Information- c. https://kidspicturedictionary.com/english-through-
pictures/things-english-through-pictures/workshop/ d. http://machinetools.bhavyamachinetools.com/types-of-
workshop-machinery-milling-grinding-shaping-machines/
e. https://drive.google.com/drive/folders/1F7rLDAGdDuGu4ULzAjFUEm11lbb-6DR0
f. Text Books
Report Writing –
Definition, Symbol, How to connect in circuit?, Different Types of tools, Applications, Important specifications, Safety precautions , `
C. Your idea of maintaining physical distance in a triple seated Hostel.
Suggested Sources of Information- a. https://www.cdc.gov/coronavirus/2019-
ncov/prevent-getting-sick/social-distancing.html Report Writing – Identify touch points in room, corridor, Mess, Common Places Suggest methods to minimize the touch at least at five places
Guidelines for Report- Front page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name, Institute
Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report on 1A, B & C as suggested
above, each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/ Mechanical Engineering
ICD First Year Students: CAF-DME Sr, No. Exercise How to write
1. A. List the following for an Auto farm mechanic
j. Skills required. v. Tools likely to be used. vi. Components likely to be used. vii. Instruments likely to used.
Suggested Sources of Information- a. CTS%20Instrument%20Mechanic_CTS_NSQF-5.pdf b. Curriculum for Auto farm Mechanic Trade By Skill
Development ministry, Government of India c- Report Writing – Give bullet points for each with possible applications of Tools, Components and Instruments
B. Explain Farming equipment used for the farming
For example Name of Different Types of Farming Tools with detailing
Suggested Sources of Information- c. https://www.agrifarming.in/farm-machinery-types-uses-
and-importance d. https://en.wikipedia.org/wiki/Harrow_(tool) e. https://england.prm.ox.ac.uk/englishness-harvesting-
tools.html f. Text Books Report Writing –
Definition, Symbol, How to connect in different tools? Different Types, Applications, Important specifications, Different Types of faults, Fault Diagnosis
C. Your idea of maintaining physical distance in a triple seated Hostel.
Suggested Sources of Information- a. https://www.cdc.gov/coronavirus/2019-
ncov/prevent-getting-sick/social-distancing.html Report Writing – Identify touch points in room, corridor, Mess, Common Places Suggest methods to minimize the touch at least at five places
Guidelines for Report- Front page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name, Institute
Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report on 1A, B & C as suggested
above, each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/ Mechanical Engineering
ICD First Year Students: CFF-DME Sr, No. Exercise How to write
1. A. List the following for a foundry and forging technician
i. Skills required. ii. Tools likely to be used. iii. Components likely to be used. iv. Instruments likely to used.
Suggested Sources of Information- a. CTS%20Instrument%20Mechanic_CTS_NSQF-5.pdf b. Curriculum for foundry and forging Mechanic Trade by
Skill Development ministry, Government of India c- Report Writing – Give bullet points for each with possible applications of Tools, Components and Instruments
B. Explain any one forging equipment used in detail
For example, Name of Different Types of forging Tools, Types of foundry Tool, forging Process
Suggested Sources of Information- c. https://www.thomasnet.com/articles/custom-
manufacturing-fabricating/forging-parts-supplies/ d. https://me-mechanicalengineering.com/tools-in-foundry-
shop/ e. https://www.forging.org/types-of-forging-processes f. https://www.scotforge.com/Why-Forging/Forging-101 g. https://drive.google.com/drive/folders/1jopRE5g4D3Y6PeZ
Wlwz2q9WrKsuErpnz h. Text Books Report Writing –
Definition, Symbol, How to connect in different operation in a series? Different Types of tools, Applications, Important Specifications, Precautions used for forging operations.
C. Your idea of maintaining physical distance in a triple seated Hostel.
Suggested Sources of Information- a. https://www.cdc.gov/coronavirus/2019-
ncov/prevent-getting-sick/social-distancing.html Report Writing – Identify touch points in room, corridor, Mess, Common Places Suggest methods to minimize the touch at least at five places
Guidelines for Report- Front page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name, Institute
Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report on 1A, B & C as suggested
above, each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/ Mechanical Engineering
Exercise in lieu of Industrial Training
ICD Second Year Students (DME)
Sr, No. Exercise How to write 1. A. Identify the suitable
opportunities for Mechanical Diploma Engineers in
i. Employment (Industry/service sector)
ii. Self-Employment (Start- up/business opportunity/ setting up of small plant)
iii. Higher studies
Suggested Sources of Information- a. CTS%20Instrument%20Mechanic_CTS_NSQF-5.pdf b. Curriculum for Mechanical engineer Mechanic
Trade By Skill Development ministry, Government of India
Report Writing – Give names of industries along with application of mechanical, Self-employment opportunities, Options for Higher studies
B. Write a report on any one of Suggested Sources of Information- following-
• Any process industry
• Hospital
• Test Laboratory
• Research Laboratory
• Air-conditioning of a big building
• Any other mechanical engineering-based industry or process
https://internshala.com/internships/mechanical-internship shorturl.at/mrtQV
https://www.edx.org/learn/robotics Any other certified course of appropriate level
Report Writing – Explain the process/processes, Find out three sensors/transducer and measurement system along with range of parameters and specification of the instruments used in the Process C. If you were asked to automate an
existing manual procedure from our daily lives for COVID-19 situation, what would you choose to automate? Give reasons for choosing the
particular procedure. How would you do it?
Suggested Sources of Information- https://nevonprojects.com/motion-based-automatic-door- opener-project/ Report Writing – Name the process to be automated, Reason for choosing the process, explain how to automate
Guidelines for Report- Front Page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name, Institute
Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report on 1A, B & C as
suggested above, each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/ Mechanical Engineering
Exercise in lieu of Project
ICD Third Year Students (DME)
Sr, No. Exercise How to write 1. Lean about the
• Engine Management System
• Industrial Catia V5 R20
• Pro-E
And Work for any one of the following project reports-
• Automatic Alcohol Dispenser
OR
Study the daily routine of the following essential workers to find out probable risks of contracting the COVID-19 virus. Also list precautionary measures to reduce risk of contracting the virus for each of the following categories.
a. Doctors b. Nurses c. Police personnel d. Municipal workers e. Bank employees f. Shopkeepers Suggest
some innovative technological interventions that can help the aforementioned essential workers.
OR Any Other technological solution for handling the COVID 19
Suggested Sources of Information- https://academy.araiindia.com/images/pdf/electronics-and-management-systems.pdf https://docs.google.com/forms/d/e/1FAIpQLSfseUYKUyFpSYBYtJ1q5wIrvZlxeHySnvyGGCnooumUiixW-w/viewform https://nti-india.com/engine-management-system/ shorturl.at/cfkC8 https://www.udemy.com/course/pro-engineer-creo-paramatic-basic-advance-level-video-trianing/
Report Writing – Write introduction to software
Report Writing – Objective, Motivation, Project details, Circuit diagram or layout, Components with specifications
Guidelines for Report- Front Page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name, Institute
Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report as suggested above,
each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/Mechanical Engg.
Exercise in lieu of In-house Training
BE First Year Students
Sr, No. Exercise How to write 1. A. List the following for a Shop floor
mechanical engineer i. Skills required. ii. Tools likely to be used. iii. Components likely to be used. iv. Instruments likely to used.
Suggested Sources of Information- a. CTS%20Instrument%20Mechanic_CTS_NSQF-5.pdf b. Curriculum for Shop floor mechanical engineer
Mechanic Trade By Skill Development ministry, Government of India
https://www.youtube.com/watch?v=FJmfv2Vz-Bg
Report Writing – Give bullet points for each with possible applications of Tools, Components and Instruments
B. Write a report on any two of following- • How to use Vernier caliper?
• How to use micrometer?
• What do you mean by lathe operations?
• Construction Details of lathe?
• Construction Details of milling?
• Different types of milling Operations
• Different types of lathe operations
Suggested Sources of Information- https://www.youtube.com/watch?v=SX0K9MiwolM&t=201s
https://www.youtube.com/watch?v=imEqHCW5--o&t=343s
http://www.engineeringarticles.org/lathe-lathe-operations-types-and-cutting-tools/
https://www.youtube.com/watch?v=p_LgK0Ffg20&t=97s
https://learnmech.com/milling-machine-operations-with-diagrams/
https://youtu.be/Za0t2Rfjewg https://www.youtube.com/watch?v=uQPCdwegXzc
https://www.youtube.com/watch?v=Chs55TQZOSk
https://drive.google.com/drive/folders/1SGoZCHCGeOYA_uVm3426tppUBS3nRSuZ
Report Writing – Objective, Apparatus Required, Key specification of Apparatus, Connection Diagram, Method, Conclusion
C. Your idea of maintaining physical distance in a triple seated Hostel.
Suggested Sources of Information- a. https://www.cdc.gov/coronavirus/2019-ncov/prevent-
getting-sick/social-distancing.html Report Writing – Identify touch points in room, corridor, Mess, Common Places Suggest methods to minimize the touch at least at five places
Guidelines for Report- Front Page: Project Name, Student Name, Course, Registration No, Institute Logo, Department Name, Institute
Name and address, Second Page: Certificate, Third Page: Dedication/Acknowledgement, followed by – Contents, Followed BY –Report on 1A, B & C as suggested
above, each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/Mechanical Engg.
Exercise in lieu of Industrial Training
Degree Second Year Students (ME)
Sr, No. Exercise How to write
1. A. Identify the following for Mechanical Engineering graduate in
i. Skill set ii. Personality Trait’s
Suggested Sources of Information- https://www.zippia.com/mechanical-engineer-jobs/skills/ https://www.bestsampleresume.com/engineering-resumes.html Report Writing – List out skill set and personality traits for Mechanical Engineer and put up your plan for next one year to acquire these skills and trails.
B. Write a report on any one of Suggested Sources of Information-
following- • Any process industry
• Hospital
• Test Laboratory
• Research Laboratory • Air-conditioning of a big building
• Any other Mechanical based industry or process
https://internshala.com/internships/mechanical-internship
shorturl.at/mrtQV https://www.edx.org/learn/robotics any other certified course of appropriate level
Report Writing – complete layout of the plant, process flow drawings of each Section, instrument studied in each section of the plant.
Identify the pressure gauge, Sensors, controllers, actuators used and their specifications, instruments installed in the plant from the
safety and environment pollution point of view, Energy
conservation steps
C. Automation reduces manpower, thus Suggested Sources of Information- some people lose their jobs to https://www.mckinsey.com/featured-insights/future-of- machines. Is it justified to automate a work/how-will-automation-affect-jobs-skills-and-wages factory to improve productivity and https://www.washingtonpost.com/politics/2019/10/17/are- while the workers and their families jobs-lost-due-bad-trade-policy-or-automation/ suffer? Support your answer with Report Writing – COVID-19 situation. Self-Explanatory
Guidelines for Report- Front Page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name, Institute
Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report on 1A, B & C as
suggested above, each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/Mechanical Engg.
Exercise in lieu of Industrial Training
Degree Third Year Students (ME) Sr, No. Exercise How to write
2. A. Identify the suitable opportunities for Mechanical Engineers in
iii. Employment (Industry/service sector)
iv. Self-Employment (Start- up/business opportunity/ setting up of small plant)
v. Higher studies
Suggested Sources of Information- a. https://www.prospects.ac.uk/job-profiles/mechanical-
engineer b. https://www.naukrigulf.com/mechanical-engineer-jobs
Report Writing – Give names of industries along with role of Mechanical Engineer, Self-employment opportunities, Options for Higher studies. Identify five Indian firms suitable for placement of SLIET student of UG Mechanical along with the details of HR personnel
B. Write a report on any one of Suggested Sources of Information-
following- • Any process industry
• Hospital • Test Laboratory
• Research Laboratory
• Air-conditioning of a big building • Any other Mechanical-Electronic
(Mechatronics) based industry or process
https://insights.globalspec.com/article/10752/temperature- measurements-in-cement-manufacture https://www.thermofisher.com/blog/mining/the-cement- manufacturing-process/ https://www.epa.ie/pubs/advice/brefs/cement.pdf https://www.planete-energies.com/en/medias/close/three- stages-refining https://www.e-education.psu.edu/eme801/node/470
http://twentyonecelsius.com.au/blog/everything-you-need-to- know-about-hvac-systems/ Any other certified course of appropriate level Report Writing – complete layout of the plant, process flow drawings of each section, mechatronics in each section of the plant. All the specifications of the sensors, controllers, actuators, P & I Drawings, logic diagrams of PLC, relay wiring, describe control systems like DCS, PLC, PID controllers, calibration of the
transmitters and wiring of the control panels etc, instruments
installed in the plant from the safety and environment pollution
point of view
C. What are the differences between AI, Strong AI, and Automation? What are their similarities? Which do you think would be more helpful to humanity, AI or Automation, and why? Justify your answer in view of COVID-19 situation.
Suggested Sources of Information- https://www.researchgate.net/publication/ 336085049_Artificial_Intelligence_in_Automation
Report Writing – Self-Explanatory
Guidelines for Report- Front Page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name, Institute
Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report on 1A, B & C as suggested
above, each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/Mechanical Engg.
Exercise in lieu of Project
Degree Fourth Year Students (ME)
Sr, No. Exercise How to write
1. A. Learn about the software for simulation
OR
Study the daily routine of the following essential workers to find out probable risks of contracting the COVID-19 virus. Also list precautionary measures to reduce risk of contracting the virus for each of the following categories.
a. Doctors b. Nurses c. Police personnel d. Municipal workers e. Bank employees f. Shopkeepers Suggest
some innovative technological interventions that can help the aforementioned essential workers.
OR Any Other technological solution for handling the COVID 19
Suggested Sources of Information- https://www.sculpteo.com/blog/2018/04/30/3d-modeling-software-top-10-of-the-best-mechanical-engineering-software/
Report Writing – Write introduction to software and tools used in
Report Writing –
Objective, Motivation, Project details, Circuit diagram or layout, Components with specifications
Guidelines for Report- Front Page : Project Name, Student Name, Course, Registration No, Institute Logo, Department Name, Institute
Name and address, Second Page: Certificate, Third Page : Dedication/Acknowledgement, followed by – Contents, Followed BY –Report as suggested above,
each section to start with New page, In the End : References and Appendix (if Required). Format : Font-12 Pt Arial, 1.5 line spacing, Both Side printing, Main Heading 14 Bold, Sub Heading 12 Bold
Sant Longowal Institute of Engineering & Technology, Longowal
SLIET Longowal/Mechanical Engg.
UG Projects: -
Student should contact respective supervisor/guide if they are amending the topic or objectives of the project. If
required students with consent of their supervisor can also work on any of the following problems or any new
topic as suggested by supervisor/guide. Changes in topic should be intimated by the student with consent of
supervisor to the project coordinator well in time.
Project Topics B.Tech final Year for GWT
1. Supply chain shortages due to COVID 19
2. Safety and Health Challenges in industry due to COVID 19
3. Designing and prototyping of low-cost workplace steam-based Sanitizer
4. Designing of low-cost Personnel protection equipment (PPE) for industry workers
5. Simulation analysis of Welding residual stress and Distortion
6. Modeling and simulation of welding deposition
7. Optimization of welding line for Shipbuilding
8. Simulation model for Submerged arc welding distortion
9. Investigation of thermal field of GMAW welding
10. Dynamic analysis of cracks in welding
11. Optimization for welding parameters for GTAW welding
12. Thermal and structural analysis of Micro plasma welding
13. Solid works-based model of Robotic GMAW welding
14. Stress analysis of washing machine drum
15. Friction stir welding applications and future scope
Project Topics B.Tech final Year for GME
1. Survey of Industry challenges due to COVID 19
2. Challenges and opportunities for Indian industry post COVID 19
3. Study of Manufacturing industry challenges due to COVID 19 and how to overcome it
4. Modeling and analysis of Motorcycle frame
5. Stress analysis of mechanisms for trolley-cum-wheelchair
6. Modeling & analysis solar assisted air dryer
7. Transient analysis of disk brake by using ANSYS software
8. Design and analysis of jet wind turbine blades
9. Modeling and analysis of drum brake
10. Wear rate analysis of nano coated cutting tools
11. Design, animation & analysis of hybrid air engine
12. Design, animation & analysis of agricultural chipper
13. Design & analysis of connecting rod using aluminum silicon carbide
14. Design improvement of centrifugal pump impeller using ANSYS.
15. Finite element analysis of the effect of motorcycle helmet materials against impact velocity
16. Structural and thermal analysis of single point cutting tool