Sanraj Forging & Engineering

Forging House

About Us Sanraj Forging & Engineering is one of the leading

manufacturers of various types of Automotive Forging of high quality and efficiency. The company has incorporated in the year 2000 by Shri Rajender Bang who had immense expertise in the field.

The manufacturing premises comprise of 20,000 sq yards of land in a highly industrial area.

Sanraj Forging have well equipped forging shop, Forging tool room, heat treatment for forging needs, power house, office blocks, laboratory complex and forging machine shop that leads to successful completion of all works with assurance of international quality.

Idler Gears An idler gear is a gear that is inserted

between two other gears. Idler gears do not affect the gear ratio between the input and output gears. The gear ratio would be computed just the same if there were no idler gear.

An idler gear is a small gear that does not change the speed and direction of a rotation. An idler gear is placed in between two transfer motions that move between them in a loosely way on a shaft against a belt.

Cluster Gear Sanraj Forging & Engineering

Cluster Gears has series or "cluster" of spur gears on a shaft or gear blank, each with varying diameters. This type of gear assembly is often used in the automotive industry, and is seen in bicycling as well.

Cluster gears are useful for many applications, ranging from light duty work to heavy duty applications. Sanraj Forging & Engineering offers the best products at the best prices.

Raised Face Flanges The raised faces have a prescribed texture

to increase their gripping and retaining force on this flat gasket. Some users of raised face flanges specify the use of spiral wound gaskets.

These gaskets may often have an inner ring on their I.D. and an outer disc around their O.D. This feature will hold the gasket concentric with the bolt circle and bore to make precise assembly easier with the gasket centered on the flange sealing surfaces. See an explanation of Spiral Wound Gaskets below. 

Gear Blanks Gear Blanks are a simple and

convenient mechanism from which specialty gears are cut. Gear blanks are smooth on the outside and inside. Sanraj Forging & Engineering manufactures quality gear blanks to any specification.

Our wide range of machinery and manufacturing experience, coupled with our dedication to quality, make W.M. Berg the right choice for all your gear blank requirements.

Speed Gears Sanraj Forging & Engineering Speed

Gears consists of highly pre-engineered gear units for "High Ratio" applications, such as motor to compressor and turbine to generator drives.

High Speed Gears made by Latest rating methods, Optimized tooth corrections, Precise bearing calculation verified on bearing tests, adapted to application bearing geometry and less shaft deformation due to optimized bearing spans.

Gear Blanks Dies are prepared by special steels

like hot work tool steels and suitably heat treated to have proper hardness and toughness so that the dies can be capable of pressing hot metal without any deformation in the die during forging.

The properties of forged Gear Blanks are considered to be better properties than any other metal forming process. Machined Forged Gear Blanks are used in Automobile sector for Two-Wheeler and Three-Wheeler.

RBD Forging RBD Forging can produce a

piece that is stronger than an equivalent cast or machined part. As the metal is shaped during the forging process, its internal grain deforms to follow the general shape of the part.

As a result, the grain is continuous throughout the part, giving rise to a piece with improved strength characteristics.

Contact Us

Sanraj Forging & Engineering. Contact Person: Mr. B . Rajender Mobile No 9325360403 Concern Person: Mr. Rajender Bang Concern Person No: 9325360403 Phone: +91 240 2556261 Website: http://sanrajforgings.com Address: Plot No. H-47/1, MIDC Waluj, Aurangabad - 431136 Area: Waluj MIDC City: Aurangabad MH State: Maharashtra Country: India