Upload
gbm-manufacturing-inc
View
216
Download
0
Tags:
Embed Size (px)
DESCRIPTION
As the manufacture, GBM offers an extensive range of high end glass mosaics, exclusively to our dealers and distributors. See our products for yourself and be ready for a suprise! GBM, it's your factory! Call (888) 862-8397 www.GBMceramics.com
Citation preview
sanora
Formats
S1120-1 S1120-2 S1120-3
S1120-4 S1120-5 S1120-6
S1120 (Tumbled)
STONE COLOR FINISH
SLATE
SANDSTONE
TRAVERTINE
QUARTZITE
BROWN
PINK
GREY
GREEN
BLACK
HONED
FLAMED
MATTE
Phone: 1.888.862.8397 Fax: 1.888.868.9887
3. Apply set- ting material using the notched side of a 1/4”x1/4” squar- squar- -notched trowel.
4. Smoothen out the setting material using the flat side of the flat side of the trowel; create an even bedding approximately 3/16” thick.
7. Apply the tile sheets onto the setting material. Align the tile sheets carefully, carefully, making sure that the grout lines are parallel with one another.
1. Clean surface of application. Surface should be free of dirt, paint, oils, curing compounds etc.
2. Make sure the back of the tile (and sub-strate) is clean. Wipe with a clean damp sponge.
8. Use a rubber grouting float to apply firm pres-sure onto the tile sheets, cre-ating a level surface.
9. Using a clean damp sponge or cloth, clean any excess set-ting material that may have “oozed” over the tile surface. the tile surface.
12. Apply grout into grout jointsthe grout joints, be sure that there are no holes while applying grout.
14. When grout has set, clean the tile with a clean,damp sponge.
10. Allow 24-36 hours, after installation, for tile to set before continuing.
11. Apply a coat of quality penetrating sealer before grouting.
13. Clean any excess grout with a damp sponge or cloth, before grout hardens.
NO NO NO