Upload
vonhu
View
213
Download
0
Embed Size (px)
Citation preview
Table of Contents
Sanitary Valves..............................................................1–12
Clamp Fittings .............................................................13–17
Weld Fittings ...............................................................18–20
I-Line Fittings .............................................................21–22
Tassalini ......................................................................23–28
Cast Iron Valves ..........................................................29–32
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
A BRIEF HISTORY…
Culver Co. Sanitary fittings identified with the 3–A‑Symbol are accepted as meeting the 3–A‑Sanitary Standards Symbol Administrative Council 3–A Standards for Design and Fabrication.Information on the 3–A Standards Program is available from the Secretary of the 3–A Sanitary Standards Committes, 6245 Executive Blvd., Rockville, MD 20852.
Culver Co. was started in 1962 as a direct stocking importer
and master domestic distributor of stainless steel fittings, nip‑
ples and flanges. With a commitment to superior quality and
service at the lowest possible price and the addition of a broad
range of complimentary products, the Company expanded
rapidly. Over the last five decades, operations have grown to
encompass the manufacture of more than 8,000 products from
30 select factories in 10 different countries.
Culver Co. now provides high quality standard and custom
fittings and valves made from the widest variety of materials in
our industry, including aluminum, brass, bronze, carbon steel,
cast iron, ductile iron, malleable iron, PVC and stainless steel.
Every product we sell is manufactured to exacting standards,
including AGA, ANSI, API, ASTM, 3–A, CGA and MSS. Most
items are produced in ISO‑9002 certified factories.
TABLE OF CONTENTS
Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
www.culvervalve.com Cu lv e r Co. (1)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
Clamp or weld ends 3A sanitary butterfly valves with forged 316 SS body and a choice of three different handles.
3A Clamp end with four-positionstainless steel handle.
SANITARY BUTTERFLY VALVES
Torque for Full Open/Close
1.0” <9 lbs./sq.in.
1.5” <9 lbs./sq.in.
2.0” 11.5 lbs./sq.in.
2.5” 13.3 lbs./sq.in.
3.0” 17.7 lbs./sq.in.
4.0” 27.4 lbs./sq.in.
NO. NAME
1 Knob
2 304 SS Steel-Bar
3 Spring SS
4 SS
5 Holder
6 Plastic Cap
7 316 SS Body
8 316 SS Disc
9 Silicone Rubber Seat
10 SS Screw Bolt
304 stainess steel handle with phenolic knob. Four-position, fully machined and polished for clean, easy operation and safety lock fit.
(2) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
BUTTERFLY VALVES
Glass reinforced Nylon or 304 stainless steel handle with forged gripper bar with new unique bolted attachment plate. This new design features a 12-position notched plate for ease of operation and precision safety lock.
New in 2008!! Lockable Plastic Handle with unique 6 position operation in one direction and “open” or “shut” option in the opposite direction.
3A Weld/Weld Butterfly Valves
Size A B C D L
1.0” .87 1.0 .94 3.11 2.40
1.5” 1.37 1.5 .94 3.35 2.53
2.0” 1.87 2.0 1.03 4.13 2.93
2.5” 2.37 2.5 1.06 4.41 3.06
3.0” 2.87 3.0 1.18 4.92 3.32
4.0” 3.84 4.0 1.18 6.18 4.00
3A Clamp/Clamp Butterfly Valves
Size A B C D L
1.0” .87 1.99 1.75 3.11 2.40
1.5” 1.37 1.99 1.75 3.35 2.53
2.0” 1.87 2.52 1.87 4.13 2.93
2.5” 2.37 3.05 1.91 4.41 3.06
3.0” 2.87 3.58 2.03 4.92 3.32
4.0” 3.84 4.69 2.03 6.18 4.00
NEW!
www.culvervalve.com Cu lv e r Co. (3)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
NO. DESIGNATION QTY.
1 Cylinder 1
2 Piston 1
3 Moving axle 1
4 Lower cylinder end 1
5 Spring 2
6 Push 4
7 Pin 1
8 O ring 1
9 O ring 1
10 Mounting washer 1
11 Screw M8 2
12 Mounting bracket 1
13 Connection piece 1
14 Positioning ring 1
15 Screw M6 2
16 Air connection 1
PNEUMATIC ACTUATOR for BUTTERFLY VALVES
All stainless steel components. Air to open / spring to close or air to close.Micro switch or solenoid control compatible design.Fully warranted for two years or 300,000 operations.
Pneumatic actuator for Culver Co.3A Sanitary Butterfly Valves.
Size A B C
1.0” 1.83 2.94 9.4
1.5” 1.96 3.07 9.5
2.0” 2.35 3.45 9.9
2.5” 2.48 3.58 10.0
3.0” 2.75 3.85 10.3
For Full Safe Spring Return For Valve Full OpenValve Closed
3.5 in.
5.3
in.
2.85
in.
(4) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
316 SS Sanitary Stainless Steel Ball Valve
Size H C L W ∅d ∅D1 L1
0.5” 0.71 2.15 3.50 5.12 0.37 1.00 1.29
0.75” 0.73 2.34 3.98 5.12 0.62 1.00 1.40
1.0” 0.89 2.72 4.49 6.50 0.87 1.98 1.57
1.5” 1.17 3.29 5.51 7.68 1.38 1.98 1.71
2.0” 1.17 3.60 6.14 7.68 1.87 2.52 1.80
2.5” 1.75 4.99 7.76 9.92 2.37 3.05 2.20
3.0” 1.75 5.33 9.02 9.92 2.87 3.58 2.54
4.0” 1.92 6.25 9.56 13.07 3.83 4.68 2.39
SANITARY BALL VALVES
MATERIAL SPECIFICATIONS PARTS MATERIAL
Body CF8M 316 SS
Cap CF8M 316 SS
Ball 316 SS
Stem 316 SS
Thrust Washer PTFE
Stem Packing PTFE
Bolt 304 SS
Hex Nut 304 SS
Bolt Washer 304 SS
Gland 304 SS
Washer 304 SS
Nut 304 SS
Handle 304 SS
Plastic Cover PVC
Lock Device 304 SS
Gasket PTFE
Stop Pin 316 SS
Clamp or Weld Ends AvailableNow available with clean out ports
www.culvervalve.com Cu lv e r Co. (5)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
3 WAY SANITARY BALL VALVE
Item Parts Material Qty.
1 Body A351-CF8M CF3M 1
2 Cap A351-CF8M CF3M 4
3 Ball A351-CF8M CF3M 1
4 Seat PTFE TEM-1600 4
5 Gasket PTFE PTFE 2
6 Thrust Washer PTFE PTFE 1
7 O-Ring VITON VITON 1
8 Stem Packing PTFE PTFE 1
9 Ring AISI 316 AISI 304 1
10 Bevel Washer AISI 301 AISI 301 2
11 Stop Pin AISI 316 AISI 316 1
12 Nut AISI 304 AISI 304 1
13 Stem AISI 316 AISI 316 1
14 Handle AISI 304 AISI 304 1
15 Spring Washer AISI 304 AISI 304 16
16 Bolt AISI 304 AISI 304 16
17 Prevaling PVEICE AISI 304 1
18 Nut AISI 316 AISI 304 1
MATERIAL OF CONSTRUCTION
Size DN ISO-5211 W H H1 C R L Ød ØdTORQUE
IN/LBS
1/2” 15 F03/F04 4.76 3.07 1.75 .35 .35 4.65 .37 1.00 79
3/4” 20 F03/F04 4.76 3.23 1.89 .35 .35 5.00 .62 1.00 85
1” 25 F03/F05 5.39 3.54 2.32 .43 .43 6.00 .87 1.98 110
1-1/2” 40 F03/F07 7.17 4.33 2.83 .55 .55 6.89 1.38 1.98 290
2” 50 F03/F07 7.17 4.52 3.23 .55 .55 7.48 1.87 2.52 680
3” 100 F10/F12 15.75 5.28 4.94 .91 .87 10.24 2.87 3.58 1770
DIMENSION
CLAMP OR WELD ENDS“L” & “T’ Ports AvailableDirect ISO-5211 Mounting Pad for Pneumatic or Electrical Actuators
(6) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
PNEUMATIC ACTUATOR for SANITARY BALL VALVES
No. Designation Qty.01 OCTI-CAM (Stop arrangement) 1
02 STOP CAP SCREW 2
03 WASHER 2
04 NUT (Stop screw) 2
05 BEARING (Piston back) 2
06 BEARING (Pinion top) 1
07 BEARING (Pinion bottom) 1
08 THRUST BEARING (Pinion) 2
09 PLUG 2
10 THRUST WASHER (Pinion) 1
11 “O” RING (Stop screw) 2
12 PISTON GUIDE 2
13 CAP SCREW (End cap) 8
14 “O” RING (End Cap) 2
15 BEARING (Piston head) 2
16 “O” Ring (Piston) 2
17 SPRING (Cartridge)min. 5 max. 12
18 SPRING CLIP (Pinion) 1
19 POSITION INDICATOR 1
20 “O” RING (Pinion bottom) 1
21 “O” RING (Pinion top) 1
30 RIGHT END CAP 1
31 LEFT END CAP 1
39 CAP SCREW (indicator) 1
40 PISTON 2
41 ACTUATOR IDENTIFICATION LABEL 1
42 END CAP LABEL 2
43 SPIGOT (Only an request) 1
50 BODY 1
60 DRIVE SHAFT 1
Pneumatic actuator for Culver Co. two-way and three-way sanitary ball valves.
Compact design with extruded aluminum body with both internal and external corrosion protection. Dual piston rack and pinion design for high-cycle life and fast operation. Multiple bearings and guides on pistons and guides for precise operation, low friction, high cycle life and blowout proof pinion shaft.
www.culvervalve.com Cu lv e r Co. (7)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
WAFER FLANGED BALL VALVE
MATERIAL SPECIFICATIONS
Parts Material
Body A351-CF8M
Gasket PTFE
Ring Nut A351-CF8M
Seat PTFE
Ball A351-CF8M
Stem AISI-316
Stem Seal PTFE
Stem Packing PTFE
Stop AISI-304
Ring AISI-304
Bevel Washer AISI-304
Nut AISI-304
Handle AISI-304
Spring Washer AISI-304
Nut AISI-304
Plastic Cover Plastic
DIMENSIONS
Size C D H L M
1-1/2” 4.33 5.91 3.50 2.44 7.60
2’ 4.92 5.91 3.86 3.15 7.60
2-1/2” 5.71 7.01 5.08 3.98 9.25
3” 6.30 7.48 5.43 4.65 9.25
4” 7.09 8.66 6.46 5.91 12.95
6” 9.50 11.00 8.31 7.25 19.50
Full Port 316 SS One Piece Body
Design SpecificationsThe Culver Co. Wafer Flanged Ball Valve is a class 1000 ball valve with ANSI 150 RF flanged ends. It is an economical and compact version of the traditional flanged ball valve and can be locked in a full open or closed position for safety and security or in a remote location.
(8) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
NO. NAME
1 Short Body
2 Long Body
3 SS Screw
4 O ring
5 Seal ring
6 SS Spring
7 Flow Support Plate
8 Disc
Weld End
Size A B C D
1.0” .87 1.0 1.5 2.32
1.5” 1.37 1.5 1.5 2.32
2.0” 1.87 2.0 1.5 2.32
2.5” 2.37 2.5 1.5 2.32
3.0” 2.87 3.0 1.5 2.32
Body & Stem & Disk: 316 SS. 3A sanitary design. Fully machined two-piece construction. Engineered angle design for fail-safe opening and closing.
Spring: Sanitary stainless steel.
O-Ring & Seal Ring: EPDM, silicone and Viton material available.
Operating Pressure:
SANITARY CHECK VALVE
1” 1.5” 2” 2.5” 3” 4”
10.9 18.9 6.4 9.9 4.8 6.1
Clamp End
Size A B C D E
1.0” .87 1.71 2.0 1.65 2.32
1.5” 1.37 1.71 2.0 1.65 2.32
2.0” 1.87 2.22 2.5 1.65 2.32
2.5” 2.37 2.78 3.1 1.65 2.32
3.0” 2.87 3.29 3.6 1.65 2.32
4.0” 3.84 4.69 6.2 2.64 2.32
www.culvervalve.com Cu lv e r Co. (9)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
B
C
A
ED
NO. NAME
1 Body
2 High Pressure Glass
3 Screw Bolt
4 Nylon Lock Nut
5 Seal Clamp End Sight-Glass
Size A B C D E F G
1.0” 5.7 3.2 3.1 .87 1.9 1.3 1.02
1.5” 6.0 3.2 3.3 1.37 1.9 1.6 1.34
2.0” 6.2 3.2 4.1 1.87 2.5 2.4 1.97
2.5” 6.2 3.2 4.4 2.37 3.1 3.0 2.56
3.0” 6.3 3.2 4.9 2.83 3.6 3.3 2.97
4.0” 6.5 3.2 6.2 3.84 4.7 4.3 3.94
Glass: High-pressure clean glass. Maximum working pressure 150 p.s.i.
Body: 316 SS. Precision machined body. 3A Sanitary design.
Screw Bolt: Stainless Steel.
Seals: EPDM. Silicone available.
SANITARY SIGHT GLASS
Weld End Sight-Glass
Size A B C D E F G
1.0” 5.8 3.2 3.1 .87 1.0 1.3 1.02
1.5” 6.1 3.2 3.3 1.37 1.5 1.6 1.34
2.0” 6.3 3.2 4.1 1.87 2.0 2.4 1.97
2.5” 6.3 3.2 4.4 2.37 2.5 3.0 2.56
3.0” 6.4 3.2 4.9 2.83 3.0 3.3 2.97
4.0” 6.6 3.2 6.2 3.84 4.0 4.3 3.94
COMPACT SANITARY SIGHT GLASS
1” 1.5” 2” 2.5” 3” 4”
10.9 18.9 6.4 9.9 4.8 6.1
Threaded One-end Design. Acme Thread to prevent sticking upon opening or closing. 316 SS Body. High Pressure Clear Plastic. EPDM Seals Standard.
Size A B C D E
1.0” 3.4 2.1 1.4 .87 1.9
1.5” 3.4 2.1 1.4 1.37 1.9
2.0” 3.86 2.7 1.6 1.87 2.5
2.5” 3.86 3.3 1.6 2.37 3.1
3.0” 4.13 3.8 1.7 2.83 3.6
Compact Clamp End Sight-GlassNEW!
(10) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
Compact and durable space saving design
Stainless steel sanitary construction
Ideal for tank or pipe mounting
Locking ring
Replaceable seats
Operating range 150 p.s.i @ 70°F to 30 p.s.i @ 250°F
Standard connections:
1/4” Male NPT 3/8” Male NPT 1/2” Male NPT
HEX SAMPLING VALVE
ROUND BAR STYLE SAMPLING VALVE
Compact and durable space saving design
Stainless steel sanitary construction
Ideal for tank or pipe mounting
Replaceable seats
Operating range 150 p.s.i @ 70°F to 30 p.s.i @ 250°F
Standard connections:
1/4” Male NPT 3/8” Male NPT 1/2” Male NPT
1” Tri clamp
NEW!
www.culvervalve.com Cu lv e r Co. (11)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
WINE BARREL TOPPING GUN
All stainless steel construction
Easy opening push down handle
Spring loaded for positive shutoff
Standard 3/8” hose barb connection
Improved shut off
Additional hose barb connections available
WINE BARREL WASHER NOZZLE
High flow stainless steel / low pressure
316 SS body
Replaceable SS bearings & clip
360° spinning design
10-30 GPM @ 50-70 PSI3/4” NPT connection
Actual size
NEW!
(12) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
L
TUBE / PIPE HEX HANGERS
Size A B
1.0” 1.67 3.41
1.5” 2.17 3.11
2.0” 2.67 3.62
2.5” 3.17 5.02
3.0” 3.67 5.59
4.0” 4.80 6.89Rubber Gromits (A) PP Sleeve (B)
Size (Inch) L H W
3/4 4.57 1.97 4.72
1 4.90 2.13 4.72
Dimensions
Light weight design. 316 SS Body.Clamp by Clamp or Clamp by Weldends. Lockable Handle.
TUBE HANGERS - 24H
COMPACT TWO-PIECE BALL VALVE
NEW!
NEW!
www.culvervalve.com Cu lv e r Co. (13)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
2CMP–90° ELL
Size A R
1.0” 2 1.5
1.5” 2.75 2.25
2.0” 3.5 3
2.5” 4.25 3.75
3.0” 5 4.5
4.0” 6.625 6
2KMP–45° ELL
Size A R
1.0” 1.125 1.5
1.5” 1.4375 2.25
2.0” 1.75 3
2.5” 2.0625 3.75
3.0” 2.375 4.5
4.0” 3.125 6
7MP–TEE
Size A B
1.0” 2.375 4.75
1.5” 2.75 5.5
2.0” 3.5 7
2.5” 3.5 7
3.0” 3.75 7.5
4.0” 4.5 9
External and internal surface finish: Polished to be within 150–OD x 180–ID grit
Tolerance of face distance: Within ±0.02”
Available Materials: 304SS or 316SS
Deviation from parallel line and right angle at end: Within 1” to 2” ±0.5 degree.
Within 1.5” to 4” ±1.0 degree
CLAMP FITTINGS
Size (Inch) L H W
3/4 4.57 1.97 4.72
1 4.90 2.13 4.72
(14) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
3114MP—Concentric Reducer Overall Overall Size Length Size Length
1.5 x 1 3 3 x 2 5
2 x 1 5 3 x 2.5 3
2 x 1.5 3 4 x 2 9.125
2.5 x 1 7 4 x 2.5 7.125
2.5 x 1.5 5 4 x 3 5.125
2.5 x 2 3
3 x 1.5 7
7RMP—REDUCING TEE(Reduced Size On Branch)
Size A B C
2 x 1 2.125 2.5625 5.125
2 x 1.5 2.40625 2.5625 5.125
2.5 x 2 2.8125 2.84375 5.6875
3 x 2 3.0625 2.90625 6.1875
3 x 2.5 3.09375 2.90625 6.1875
9MP–CROSS
Size A B
1.0” 2.375 4.75
1.5” 2.75 5.5
2.0” 3.5 7
2.5” 3.5 7
3.0” 3.75 7.5
4.0” 4.5 9
3214MP—Eccentric Reducer Overall Overall Size Length Size Length
1.5 x 1 3 3 x 2 5
2 x 1 5 3 x 2.5 3
2 x 1.5 3 4 x 2 9.125
2.5 x 1.5 5 4 x 2.5 7.125
2.5 x 2 3 4 x 3 5.125
3 x 1.5 7
CLAMP FITTINGS
www.culvervalve.com Cu lv e r Co. (15)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
CLAMP FITTINGS 16AMP–Solid End Cap
Size A B
.75” .20 .992
1.0” .25 1.984
1.5” .25 1.984
2.0” .25 2.516
2.5” .25 3.047
3.0” .25 3.579
4.0” .31 4.682
6.0 .44 6.567
11/2” 16AMP used on both 1” and 11/2” lines.
Size Tube O.D. A B
1” 2 2-1/8
1-1/2” 2-3/4 2-5/8
2” 4-1/2 4-1/2
2-1/2” 4-1/4 3-1/8
3” 6 6-1/4
4” 6-5/8 5-1/8
28 BMP True Y
Long Hose Adapter 14MPHRL
Size A B C D E
1.0” 1.99 .86 .82 1.51 5.53
1.5” 1.99 1.36 1.28 1.51 5.53
2.0” 2.52 1.84 1.80 2.15 5.53
2.5” 3.05 2.34 2.29 2.65 5.53
3.0” 3.58 2.85 2.80 3.15 5.53
4.0” 4.69 3.85 3.80 4.15 5.53
Also available in Weld End
Welding Ferrule 3A-14WMP 14AMP
Size A B C D D
3/4” .62 .75 .99 .5 1.125
1.0” .87 1.0 1.99 .5 1.125
1.5” 1.37 1.5 1.99 .5 1.125
2.0” 1.87 2.0 2.52 .5 1.125
2.5” 2.37 2.5 3.05 .5 1.125
3.0” 2.87 3.0 3.58 .5 1.125
4.0” 3.84 4.0 4.69 .5 1.125
6.0” 5.78 6.0 6.57 .85 1.125
Short Hose Adapter 14MPHR
Size A B C D E
1.0” 1.99 .86 .82 1.51 1.69
1.5” 1.99 1.36 1.28 1.51 1.69
2.0” 2.52 1.84 1.80 2.15 2.31
2.5” 3.05 2.34 2.29 2.65 2.34
3.0” 3.58 2.85 2.80 3.15 3.10
4.0” 4.69 3.85 3.80 4.15 3.37
Also available in Weld End
(16) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
Standard Sanitary Clamp Gaskets
Standard Clamp Gaskets0-40MP-U Buna-N
0-40MP-SFY Viton Sizes
0-40MP-E EPDM } Available
0-40MP-G Teflon® 1”, 11/2”, 2”, 21/2”,
0-40MP-X Silicone 3”, 4”, 5”, & 6”
0-40MP-UW Buna-N (White)
CLAMP FITTINGS
Size TubeO.D. A B
1-1/2” x 1/4” 1.57 .75
1-1/2” x 3/8” 1.57 .75
1-1/2” x 1/2” 1.57 .75
1-1/2” x 3/4” 1.77 .75
1-1/2” x 1” 1.97 .75
1-1/2” x 1-1/4” 1.97 .75
1-1/2” x 1-1/2” 1.97 .75
2” x 1/4” 1.97 .75
2” x 3/8” 1.97 .75
2” x 1/2” 1.97 .75
2” x 3/4” 1.97 .75
2” x 1” 1.97 .75
2” x 1-1/2” 1.97 .75
2” x 2” 2.17 1.38
3” x 3” 2.76 1.38
21RMP and 22RMPReducing NPT Adapters
Clamp end indicated first
21RMP 22RMP
www.culvervalve.com Cu lv e r Co. (17)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
13MHP High Pressure Clampwith Screw Bolt Brass Nut
Size A B
1.5 1.71 2.05
2 2.22 2.58
2.5 2.74 3.11
3 3.05 3.64
4 4.29 4.74
6 6.22 6.69
13MHH Heavy DutySingle Pin Clamp
Size A B
.75” 1.10 1.28
1” 1.75 2.11
1.5” 1.75 2.11
2” 2.28 3.03
2.5” 2.81 3.57
3” 3.31 4.06
3.5” 3.90 4.69
4” 4.33 5.20
4.5” 4.84 5.71
6” 6.12 6.71
8” 8.07 8.66
13SF Heavy DutyDouble Pin Clamp
Size A B
.5” .79 1.10
.75” .79 1.10
1.5” 1.77 2.31
2” 2.32 2.83
2.5” 2.64 3.31
3” 3.35 3.86
4” 4.49 5.00
CLAMP FITTINGS
(18) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
90° Tube Bend
Size A B C
1.0” 1.0 1.5 0.065
1.5” 1.5 2.25 0.065
2.0” 2.0 3 0.065
2.5” 2.5 3.75 0.065
3.0” 3.0 4.5 0.065
4.0” 4.0 6 0.083
45° Tube Bend
Size A B C
1.0” 1.0 .625 0.065
1.5” 1.5 1.3125 0.065
2.0” 2.0 1.25 0.065
2.5” 2.5 1.5625 0.065
3.0” 3.0 1.875 0.065
4.0” 4.0 2.5 0.083
Tee
Size A B C D
1.0” 1.0 2.25 1.125 0.065
1.5” 1.5 3.3125 2.65625 0.065
2.0” 2.0 4.125 2.0625 0.065
2.5” 2.5 4.6875 2.34375 0.065
3.0” 3.0 5.1875 2.59375 0.065
4.0” 4.0 6.875 3.4375 0.083
Cross
Size A B C D
1.0” 1.0 2.25 1.125 0.065
1.5” 1.5 3.3125 2.65625 0.065
2.0” 2.0 4.125 2.0625 0.065
2.5” 2.5 4.6875 2.34375 0.065
3.0” 3.0 5.1875 2.59375 0.065
4.0” 4.0 6.875 3.4375 0.083
WELD FITTINGS
www.culvervalve.com Cu lv e r Co. (19)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
90° Long Tube Bend
Size A B C
1.0” 1.0 2.0625 0.065
1.5” 1.5 2.9375 0.065
2.0” 2.0 4.0625 0.065
2.5” 2.5 5.1875 0.065
3.0” 3.0 6.3125 0.065
4.0” 4.0 8.3125 0.083
Long Tee
Size A B C D
1.0” 1.0 3.75 1.875 0.065
1.5” 1.5 4.5 2.25 0.065
2.0” 2.0 6 3 0.065
2.5” 2.5 6 3 0.065
3.0” 3.0 6.5 3.25 0.065
4.0” 4.0 7.75 3.875 0.083
45° Long Tube Bend
Size A B C
1.0” 1.0 1.1875 0.065
1.5” 1.5 1.625 0.065
2.0” 2.0 2.3125 0.065
2.5” 2.5 3 0.065
3.0” 3.0 3.6875 0.065
4.0” 4.0 4.8125 0.083
Long Cross
Size A B C D
1.0” 1.0 3.75 1.875 0.065
1.5” 1.5 4.5 2.25 0.065
2.0” 2.0 6 3 0.065
2.5” 2.5 6 3 0.065
3.0” 3.0 6.5 3.25 0.065
4.0” 4.0 7.75 3.875 0.083
WELD FITTINGS
(20) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
Concentric Reducer
Size A B C
1.5 x 1 2 1.25 1
2 x 1.5 2 2 1.5
2.5 x 1.5 4 2.5 1.5
2.5 x 2 2 2.5 2
3 x 1.5 6 3 1.5
3 x 2 4 3 2
3 x 2.5 2 3 2.5
4 x 1.5 10 4 x
4 x 2 8 4 x
4 x 2.5 6 4 x
4 x 3 4 4 x
Eccentric Reducer
Size A B C
1.5 x 1 2 1.5 1
2 x 1.5 2 2 1.5
2.5 x 1.5 4 2.5 1.5
2.5 x 2 2 2.5 2
3 x 1.5 6 3 1.5
3 x 2 4 3 2
3 x 2.5 2 3 2.5
4 x 1.5 10 4 1.5
4 x 2 8 4 2
4 x 2.5 6 4 2.5
4 x 3 4 4 3
WELD FITTINGS
Size A
1.0” .47
1.5” .59
2.0” .78
2.5” 1.06
3.0” 1.09
4.0” 1.28
Domed Cap
www.culvervalve.com Cu lv e r Co. (21)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
I–LINE FITTINGS Male Female I–Line I–Line I–Line Ferrule Gasket Ferrule
Complete Assembly
Cap (M or F)
Size A
1.0” 1.995
1.5” 1.995
2.0” 2.640
2.5” 3.307
3.0” 3.870
4.0” 4.870
6.0” 7.495
I–Line Clamp
Size A
1.0” n.a
1.5” 2.3125
2.0” 3.375
2.5” 3.625
3.0” 4.0
4.0” 5.0
Male Female
Size A
1.0” .47
1.5” .59
2.0” .78
2.5” 1.06
3.0” 1.09
4.0” 1.28
(22) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
I–LINE FITTINGS Short Weld Ferrule (Male)
Size A B C
1.0” 1 .875
1.5” 2.3125 1.5 1.375
2.0” 3.125 2 1.875
2.5” 3.625 2.5 2.375
3.0” 4 3 2.84375
4.0” 5 4 3.84375
Long Weld Ferrule (Male)
Size A B C
1.0” 1 .875
1.5” 2.3125 1.5 1.375
2.0” 3.125 2 1.875
2.5” 3.625 2.5 2.375
3.0” 4 3 2.84375
4.0” 5 4 3.84375
Short Weld Ferrule (Female)
Size A B C
1.0” 1 .875
1.5” 2.3125 1.5 1.375
2.0” 3.125 2 1.875
2.5” 3.625 2.5 2.375
3.0” 4 3 2.84375
4.0” 5 4 3.84375
Long Weld Ferrule (Female)
Size A B C
1.0” 1 .875
1.5” 2.3125 1.5 1.375
2.0” 3.125 2 1.875
2.5” 3.625 2.5 2.375
3.0” 4 3 2.84375
4.0” 5 4 3.84375
www.culvervalve.com Cu lv e r Co. (23)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
L
D C
LA
TASSALINI BUTTERFLY VALVES
DN A C D L lb.
1” 3.11 .87 1 1.34 1.6
1.5” 3.35 1.37 1.5 1.50 1.8
2” 4.13 1.87 2 1.57 2.8
2.5” 4.41 2.37 2.5 1.57 3.2
3” 4.92 2.87 3 1.61 3.9
4” 6.18 3.83 4 1.73 5.5
5” 7.09 4.80 5 1.57 9.0
6” 8.35 5.80 6 1.57 13.2
8” 10.10 7.80 8 1.77 17.2
10” 12.05 9.80 10 1.77 37.5
Butterfly Valve PE
DN A C K L lb.
1” 3.11 .87 1.99 1.38 2.1
1.5” 3.35 1.37 1.99 1.42 2.2
2” 4.13 1.87 2.52 1.57 2.6
2.5” 4.41 2.37 3.05 1.57 3.5
3” 4.92 2.87 3.58 1.57 4.3
4” 6.18 3.83 4.69 1.77 7.6
5” 7.09 4.80 5.69 1.61 9.5
6” 8.35 5.80 6.54 1.61 13.7
8” 10.10 7.80 8.54 1.77 17.9
10” 12.05 9.80 10.55 1.77 38.4
Butterfly Valve E. FR.
DN D K L M lb.
1” 1 1.99 1.34 1.38 1.8
1.5” 1.5 1.99 1.50 1.42 2.0
2” 2 2.52 1.57 1.57 2.7
2.5” 2.5 3.05 1.57 1.57 3.4
3” 3 3.58 1.61 1.57 4.1
4” 4 4.69 1.73 1.77 6.9
5” 5 5.69 1.57 1.61 9.3
6” 6 6.54 1.57 1.61 13.4
8” 8 8.54 1.77 1.77 17.5
10” 10 10.55 1.77 1.77 37.9
Butterfly Valve PE./ E. FR.
(24) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
TASSALINI HINGED BUTTERFLY VALVES
DN C D L lb.
2” 51 1.87 2.28 1.57 1.9
Hinged Butterfly Valve PE.
DN C K L lb.
2” 51 1.87 2.52 1.57 2.0
Hinged Butterfly Valve E. FR.
• Made from press-forged and solution heat-treated blanks• Shutters made from press-forged and solution heat-treated AISI 316L stain less steel pieces machined over the entire surface and ground on the revolving parts.• Easy acess for cleaning• Standard fitting of two PTFE bushes on the shutter stems to eliminate rotation friction.• Seal rings compression-pressed from first grade elastomers. Standard silicone. On request EPDM, viton, PTFE-coated vito, PTFE + silicone.• Interchangeability between the different standards available• Simple, safe and reliable operating.• Maximum operating pressure: 30 PSI• Standard production: 2”
NO. NAME
1 Butterfly
2 Gasket
3 Clamp
4 Flange
5 Handle
6 Locking Ring
7 Spring
www.culvervalve.com Cu lv e r Co. (25)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
TASSALINI BALL VALVES
DN C D L lb.
2” 51 1.87 2.28 1.57 1.9
DN C K L lb.
2” 51 1.87 2.52 1.57 2.0
DN A B C D lb.
1” 25 3.54 3.74 .87 1 2.4
1.5” 38 4.33 4.21 1.37 1.5 4.6
2” 51 4.96 4.65 1.87 2 6.9
2.5” 63 5.63 5.31 2.37 2.5 10.4
3” 76 6.42 6.22 2.83 3 15.2
4” 101 7.95 6.69 3.83 4 29.8
Drainage Ball Valve P.E.
DN A B C K lb.
1” 25 3.54 3.74 .87 1.99 2.5
1.5” 38 4.33 4.21 1.37 1.99 4.7
2” 51 4.96 4.65 1.87 2.52 7.0
2.5” 63 5.63 5.31 2.37 3.05 10.5
3” 76 6.42 6.22 2.83 3.58 15.4
4” 101 7.95 6.69 3.83 4.69 30.0
Drainage Ball Valve E. FR.
DN A B C D lb.
.5” 12 3.94 2.93 .37 .5 1.7
.75” 19 3.94 2.93 .62 .75 1.7
1” 25 4.33 3.78 .87 1 2.5
1.5” 38 5.12 4.29 1.37 1.5 4.5
2” 51 5.71 4.88 1.87 2 6.1
2.5” 63 6.61 5.31 2.37 2.5 10.6
3” 76 7.17 6.22 2.83 3 16.4
Extracte Ball Valve P.E.
DN A B L K lb.
.5” 12 3.94 2.93 2.17 .98 1.7
.75” 19 3.94 2.93 2.17 .98 1.7
1” 25 4.33 3.78 2.36 1.99 2.5
2.5 38 5.12 4.29 3.15 1.99 4.6
2” 51 5.71 4.88 3.74 2.52 6.2
2.5” 63 6.61 5.31 4.65 3.05 10.8
3” 76 7.17 6.22 5.20 3.58 16.6
Extract Ball Valve E. FR.
(26) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
TASSALINI SIGHT GLASSES
DN A B D G lb.
1” 25 2.17 5.79 .87 1 .9
1.5” 38 2.76 6.02 1.37 1.5 1.4
2” 51 3.35 6.02 1.87 2 1.9
2.5” 63 3.74 6.42 2.37 2.5 2.1
3” 76 4.13 6.81 2.87 3 2.4
4” 101 5.51 6.81 3.84 4 6.1
Sight Glass P.E.
DN A B C K lb.
1” 25 3.54 6.5 .87 1.97 1.2
1.5” 38 4.33 6.5 1.37 1.97 1.7
2” 51 4.96 6.5 1.87 2.52 2.3
2.5” 63 5.63 6.5 2.37 3.05 2.6
3” 76 6.42 6.5 2.87 3.58 3.1
4” 101 7.95 6.5 3.84 4.69 7.2
Sight Glass E. FR.
• High strength construction• Pyrex glass. On request plexiglas external guard.• Equipped with special tie rods and seals to prevent load pressure and vibrations on the glass.• Maximum operating pressure: 145 PSI
NO. PART
1 Glass Pipe
2 Seal
3 Tie Rod
4 Self-Locking Nut
5 Guard
www.culvervalve.com Cu lv e r Co. (27)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
TASSALINI 2-WAY PLUG COCK
DN B C D L lb.
1” 25 4.92 .87 1.0 3.94 4.3
1.5 38 6.30 1.37 1.5 4.53 9.4
2” 51 6.69 1.87 2.0 5.51 13.3
2.5” 63 7.87 2.37 2.5 6.30 27.8
3” 76 9.06 2.87 3.0 6.30 35.6
2-Way Plug Cock PE.
DN B C D L lb.
1” 25 4.92 3.54 1.98 3.94 4.3
1.5” 38 6.30 4.61 1.98 4.53 9.4
2” 51 6.69 4.80 2.52 5.51 14.2
2.5” 63 7.87 5.59 3.05 6.30 31.5
3” 76 9.06 6.06 3.58 6.30 40.6
2-Way Plug Cock E. FR.
DN B C D L lb.
1” 25 4.92 .87 1.0 3.94 4.5
1.5” 38 6.30 1.37 1.5 4.53 9.8
2” 51 6.69 1.87 2.0 5.51 13.5
2.5” 63 7.87 2.37 2.5 6.30 27.2
3” 76 9.06 2.87 3.0 6.30 37.5
3-Way Plug Cock PE.
DN B E K L lb.
1” 25 4.92 3.54 1.98 3.94 5.2
1.5” 38 6.30 4.61 1.98 4.53 10.8
2” 51 6.69 4.80 2.52 5.51 15.3
2.5” 63 7.87 5.59 3.05 6.30 29.2
3” 76 9.06 6.06 3.58 6.30 36.0
3-Way Plug Cock E. FR.
TASSALINI 3-WAY PLUG COCK
(28) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
TASSALINI HANDLES & SEAL RINGS
DIAM. A B L
.98 / 1.10 1.72 .913 1.06
1.34 / 1.5 2.06 .913 1.38
1.575 2.19 .913 1.54
2 / 2.05 2.60 .913 1.93
2.4 / 2.5 3.01 .921 2.34
2.8 / 3.0 3.50 1.000 2.74
3.35 3.90 1.000 3.13
4.09 4.69 1.000 3.94
Buterfly Valve Seal Ring
Opening Handle 2 Position ABS Handle with Lever
Handle with 7 Lever Position
7.875”
Ø 50
5.807”
7.085”
www.culvervalve.com Cu lv e r Co. (29)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
Shaft weather seal. Strong precision key gives
positive attachment for manuallever, gear or actuator.
Actuator flangeaccommodatesall types of operator; manual,gear, electric, hydraulic andpneumatic actuators.
Luberized bronze or Teflonbushings give stem support atactuator mounting andimmediately outboard of seat.
Pressure surge seals aremolded inside the seat shafthole area. These rings belowdisc are materially compatiblewith the seat to providefailsafe sealing around stem,eliminating possible leakage.The phenolic backed seat isnon-collapsible, stretchresistant and blowout proof.
Valves available with both
New pinless style disc for high end applications.
Epoxy coated.
wafer and lug type bodies.Fully lined body in EPDM,Buna or Fluororubber/Teflon®.
Polished disc from 316S/S, Bronze or nickelplated Ductile Irongives highly efficientseal; prevents leakageinto the stem area.
One piece thru-stemdesign ensuresdependability andpositive disc control.
Precision profile discprovides bubble-tightseal shutoff withminimal disc/seatinterference, assuringminimum torque andlonger seat life.
Alignment features alloweasy installation betweenpipeline flanges.
Axial bearing preventsshaft overload.
Supported stem seatprotects againstdistortion and leakage.
Cast Iron Butterfly Valves for agricultural,chemical, petroleum and industrial service.
(30) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
CAST IRON WAFER BUTTERFLY VALVE CLASS 200
Size (inches) A B C D L H K E
1-1/2” 6.34 3.15 1.65 2.01 1.26 3.34 3.03 2.25
2” 6.90 3.50 1.76 2.47 1.26 3.79 3.03 2.25
2-1/2” 7.13 3.74 1.78 3.04 1.26 4.45 3.03 2.25
3” 7.87 4.49 2.05 4.04 1.26 2.79 3.62 2.75
4” 8.39 5.00 2.14 4.80 1.26 3.24 3.62 2.75
5” 8.90 5.47 2.20 6.08 1.26 3.59 3.62 2.75
6” 10.24 6.89 2.39 7.91 1.77 4.44 4.53 3.50
8” 11.50 7.99 2.58 9.80 1.77 3.64 4.53 3.50
10” 13.27 9.53 3.03 11.81 1.77 4.15 5.51 4.25
12” 14.49 10.51 3.01 13.06 1.77 4.79 5.51 4.25
14” 15.75 11.85 3.41 15.26 2.05 4.03 7.76 6.25
16” 16.61 12.87 4.16 17.26 2.05 3.60 7.76 6.25
18” 18.90 14.21 5.19 19.25 2.52 4.00 7.76 6.25
20” 22.13 18.07 5.98 23.23 2.99 4.74 10.87 8.50
24” 22.13 18.07 5.98 23.23 2.99 4.74 10.87 8.50
36” 28.43 25.71 8.07 33.90 5.12 4.63 12.20 10.00
Dimensions
Technical Data
Nominal Diameter 2”-12” 14”-24” inch
Nominal Pressure 232 145 PSI
Testing Shell Test 350 217 PSI
Pressure Seal Test 255 160 PSI
Working Temperature 14o F to 302o F
Applicable Medium: Fresh Water, Sewage, Sea Water, Air, Vapor, Medicine, Foods, Etc.
Material Specifications
PARTS MATERIAL
BODY ASTM A 126 Cast Iron
DISC Ductile Iron, Copper Alloy, Stainless Steel
STEM Stainless Steel, Carbon Steel
BUSHING Luberized Bronze, PTFE
LINER EPDM, Neoprene, Buna, Viton™, PTFE
www.culvervalve.com Cu lv e r Co. (31)(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
CAST IRON LUG BUTTERFLY VALVE CLASS 200
Size (inches) A B C D L H K E
2” 6.34 3.15 1.65 2.01 1.26 3.34 3.03 2.25
2.5” 6.90 3.50 1.76 2.47 1.26 3.79 3.03 2.25
3” 7.13 3.74 1.78 3.04 1.26 4.45 3.03 2.25
4” 7.87 4.49 2.05 4.04 1.26 2.79 3.62 2.75
5” 8.39 5.00 2.14 4.80 1.26 3.24 3.62 2.75
6” 8.90 5.47 2.20 6.08 1.26 3.59 3.62 2.75
8” 10.24 6.89 2.39 7.91 1.77 4.44 4.53 3.50
10” 11.50 7.99 2.58 9.80 1.77 3.64 4.53 3.50
12” 13.27 9.53 3.03 11.81 1.77 4.15 5.51 4.25
14” 14.49 10.51 3.01 13.06 1.77 4.79 5.51 4.25
16” 15.75 11.85 3.41 15.26 2.05 4.03 7.76 6.25
18” 16.61 12.87 4.16 17.26 2.05 3.60 7.76 6.25
20” 18.90 14.21 5.19 19.25 2.52 4.00 7.76 6.25
24” 22.13 18.07 5.98 23.23 2.99 4.74 10.87 8.50
Dimensions
Technical Data
Nominal Diameter 2”-12” 14”-24” inch
Nominal Pressure 232 145 PSI
Testing Shelf Test 350 217 PSI
Pressure Seal Test 255 160 PSI
Working Temperature 14o F to 302o F
Applicable Medium: Fresh Water, Sewage, Sea Water, Air, Vapor, Medi-cine, Foods, Etc.
Material Specifications
PARTS MATERIAL
BODY ASTM A 126 Cast Iron/Ductile iron
DISC Ductile Iron, Copper Alloy, Stainless Steel
STEM Stainless Steel, Carbon Steel
BUSHING Luberized Bronze, PTFE
LINER EPDM, Neoprene, Buna, Viton™
(32) Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
CAST IRON WAFER CHECK VALVE CLASS 200
Size (inches) A B C D
2” 6.34 3.15 1.65 2.01
2.5” 6.90 3.50 1.76 2.47
3” 7.13 3.74 1.78 3.04
4” 7.87 4.49 2.05 4.04
5” 8.39 5.00 2.14 4.80
6” 8.90 5.47 2.20 6.08
8” 10.24 6.89 2.39 7.91
10” 11.50 7.99 2.58 9.80
12” 13.27 9.53 3.03 11.81
14” 14.49 10.51 3.01 13.06
16” 15.75 11.85 3.41 15.26
18” 16.61 12.87 4.16 17.26
20” 18.90 14.21 5.19 19.25
24” 22.13 18.07 5.98 23.23
DimensionsTechnical Data
Nominal Diameter 2”-12” 14”-24” inch
Nominal Pressure 232 145 PSI
Testing Shell Test 350 217 PSI
Pressure Seal Test 255 160 PSI
Working Temperature 14o F to 302o F
Applicable Medium:Fresh Water, Sewage, Sea Water, Air, Vapor, Medicine, Foods, Etc.
Material Specifications
PARTS MATERIAL
BODY Cast Iron ASTM A 126 Grade B
DISC 316 Stainless Steel, Carbon Steel
STEM Stainless Steel, Carbon Steel
SPRING Stainless Steel, Carbon Steel
LINER EPDM, Neoprene, Buna, Viton™
Table of Contents
Sanitary Valves..............................................................1–12
Clamp Fittings .............................................................13–17
Weld Fittings ...............................................................18–20
I-Line Fittings .............................................................21–22
Tassalini ......................................................................23–28
Cast Iron Valves ..........................................................29–32
SANITARY STAINLESS STEELIndustrial Pipe Fittings & Valves
A BRIEF HISTORY…
Culver Co. Sanitary fittings identified with the 3–A‑Symbol are accepted as meeting the 3–A‑Sanitary Standards Symbol Administrative Council 3–A Standards for Design and Fabrication.Information on the 3–A Standards Program is available from the Secretary of the 3–A Sanitary Standards Committes, 6245 Executive Blvd., Rockville, MD 20852.
Culver Co. was started in 1962 as a direct stocking importer
and master domestic distributor of stainless steel fittings, nip‑
ples and flanges. With a commitment to superior quality and
service at the lowest possible price and the addition of a broad
range of complimentary products, the Company expanded
rapidly. Over the last five decades, operations have grown to
encompass the manufacture of more than 8,000 products from
30 select factories in 10 different countries.
Culver Co. now provides high quality standard and custom
fittings and valves made from the widest variety of materials in
our industry, including aluminum, brass, bronze, carbon steel,
cast iron, ductile iron, malleable iron, PVC and stainless steel.
Every product we sell is manufactured to exacting standards,
including AGA, ANSI, API, ASTM, 3–A, CGA and MSS. Most
items are produced in ISO‑9002 certified factories.
TABLE OF CONTENTS
Cu lv e r Co. www.culvervalve.com
(800) 421-6136 • fax (818) 772-5115