Upload
benjamin-long
View
232
Download
2
Embed Size (px)
Citation preview
CLSW
Sand washer
APPLICATIONSmunicipal waste water treatment plantsindustrial waste water treatment plants such as • paper mills • food industry • chemical industry
ADVANTAGES• Optimization of the separation of water and sand • Reduction of the organic particles in the sand <3%• Low costs of maintenance
LOWER OUTLET
35°
AU
TOM
ATIC
VA
LVE
ORG
AN
IC P
ART
ICLE
S O
UTL
ET
* CLEAN WATER OUTLET
INLET
MIXER
SCREW CONVEYOR
SCREW GEAR BOX
B
SANDOUTLET
A
C
D
WASHING WATER
INLE
T
CLE
AN
WAT
ER O
UTL
ETINLET
screening• Drum fine screens for municipal WWTP and for MBR pretreatment mod. VSA-VSA MBR• Mechanical coarse-medium-fine screens mod. GVB-GVF-GVS• Rotary fine screens mod. RTV• Rotary filtering drums mod. SGR• Filter screws mod. VSR• Step screens mod. VTR• Overflow spillways mod. VSE• Belt fine screen mod. VFRpretreatment• Compact plants mod. KOMBI• Septage receiving stations mod. VFA DM• Sand classifiers/washers mod. CLS-CLSW RANGE OF PRODUCTS
• Shafted washer compactors and hydraulic compactors mod.VWP-CMP• Travelling bridges for grit and grease removal mod. PVDsedimentation• Circular clarifiers mod. PTP-PTA• Travelling bridge for settlement tanks mod. PVS• Sludge thickeners mod. ISPaccessories• Screw conveyors mod. CCL• Penstocks mod. PAR• Rotating brushes mod. SPZ• Bagger assemblies
pretreatment
SAVI S.r.l.
VIA ROMA, 80 46037 RONCOFERRARO (MN) ITALY TEL. +39 0376 663721 FAX +39 0376 [email protected] _ www.savi.mn.it
Certificate no. 50 100 3460 attests the SAVI S.r.l. Quality System is in conformity with the rule UNI EN ISO 9001:2008. The certificate is valid as for the design, manufacture, installation, and technical assistance of machines and accessories for water treatment plants.
SPECIFICATIONS/MODEL CLSW-10 CLSW-20 CLSW-30
NOMINAL FLOW RATE (l/sec) 10 20 30
AGITATOR’S INSTALLED POWER (kW) 0,37
INSTALLED POWER (kW) 1,1
PROTECTION (IP) IP55 - Class F
WATER CONSUMPTON (l/min at 2 bar) 25 40
PARTICLES SEPARATION > 0.2 mm (%) > 95%
ORGANIC PARTICLES REDUCTION (%) < 3 %
SEPARATE SAND (kg/h) 180-300 400-600 800-1000
DIAMETRE’S SPIRAL (mm) 240 280 280
LOWER OUTLET (inch) 2’’
INLET (DN) DN80-PN10 DN150-PN10 DN150-PN10
OUTLET (DN) DN150-PN10 DN200-PN10 DN250-PN10
A OUTLET HEIGHT (mm) 2500
B LENGHT (mm) 5500
C HEIGHT (mm) 3100
D WIDTH (mm) 2300
* additional sizes available
operation • Sand and water mixture to be separated
conveyed through an inlet placed on the top of the machine through a pump, air lift or by gravity • Sand settles in the lower par t of the truncated cone tank • Sand washing for the separation of the organic par ticles
from the sand itself with water injection and slow mixer • Sand conveyed through a thick spiral • Inspectionable tank in order to ensure effectiveness and easy maintenance • On demand, sand washing system device
complete with blowers, piping, exclusion valve and diffusers for the separation of the organic
par ticles from the sand.
© S
AVI 2
012
prI
ntS
tud
IOg
ra
fIcO
.It