Click here to load reader
Upload
blaise-pettus
View
231
Download
1
Embed Size (px)
Citation preview
Samsung PC Studio Manual
PC Connectivity Via [email protected]
For connection via USB, the USB driver for the Phone should be installed on the PC in advance.
Press Internet Access
Insert Samsung PC Studio (PC Studio is the updated version of EasyStudio) into CD Rom
Press Next button after accepting the terms in the license agreement
Press Next
Choose a location to be saved
Then Press Next
Press Install
Then Press Install
Wait until the Samsung PC Studio Internet Access is installing
Press Finish button
Press Finish button
After installing Samsung PC Studio open Internet Access>then go to set up
Press on Setup button
The below screen will be appeared. Select Country name and Network provider name just
as given below>APN Name will be gpinternet>Connection name will be Grameenphone or
GP>Phone number will be*99***1#>User name and password must be blank>then click on save button
Press on Save Button
Then a new icon named GP will appear as shown below
Close the window by pressing here
Then the below screen will appear again. Now press connect
Press Connect button to get the internet connection
After a short while, the successful connection message will be displayed. Now you can use the Internet, using such applications as Internet Explorer or Fire fox.
PC Studio Checklist:1. For connection via USB, the USB driver for the Phone should be
installed on the PC in advance.2. There are at least five different versions of PC Studio. Make sure
you have the correct version for your phone model. You can download it from samsungmobile.com
3. Make sure your USB or Serial cable is compatible with your phone model. You can always check for the correct data cable by looking at the model number on samsungmobile.com in your phone's accessories section.
4. For PC Studio 1 and PC Studio II 1, no drivers are necessary as the original data cables of the phones using versions 1 and II-1 are serial cables which don't require any drivers. For all other PC Studio versions, you will need to install the USB driver that comes with the software if you are using a USB cable as your connection.
5. If you are using a Bluetooth dongle or IrDa port as your connection, the necessary driver(s) should be provided with their data kit and should be correctly installed and set up prior to the installation of PC Studio.