10
Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement How to replace a Samsung Galaxy Tab S2 9.7 SM-T813 SD card reader. Written By: Nash Elder Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01 Guide ID: 108102 - This document was generated on 2019-09-22 09:19:50 AM (MST). © iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 10

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

Samsung Galaxy Tab S2 9.7 SM-T813 SD CardReader Replacement

How to replace a Samsung Galaxy Tab S2 9.7 SM-T813 SD card reader.

Written By: Nash Elder

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 1 of 10

Page 2: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

INTRODUCTION

This replacement is extremely fast, but it requires disassembly of other components of the devicefirst. Please see the prerequisite guides.

TOOLS:JIS #00 Screwdriver (1)Phillips #0 Screwdriver (1)iOpener (1)Suction Handle (1)iFixit Opening Picks set of 6 (1)

A set of 6 picks will suffice, but more picks willmake removing the screen easier.

iFixit Opening Tools (1)Tweezers (1)Paperclip (1)

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 2 of 10

Page 3: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

Step 1 — Screen

Heat the iOpeners in a microwavefor 1-2 minutes.

The iOpeners will be hot. Usecaution and hold the tabs on theends.

Place heated iOpeners on screenedges to heat the adhesive.

For more detailed instructions onhow to use the iOpeners, pleaserefer to the iOpener Instructions.

Step 2

Separate the screen assembly fromthe back by wedging the picksbetween the two components.

Slide the picks along the edge andleave them holding the device openall around the edges.

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 3 of 10

Page 4: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

Step 3

Place suctioning device near thecorner of the screen and gently liftup to create a gap between the frontpanel assembly and the back.

Insert the picks to hold the twocomponents apart once a gap iscreated.

Step 4

Once all edges have beendisconnected, carefully lift thescreen off by pulling one side up.

Be careful not to cut yourself. Anybroken glass from the screen will besharp.

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 4 of 10

Page 5: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

Step 5

Using the tweezers, gently peel upon the silver tape covering theconnector.

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 5 of 10

Page 6: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

Step 6

Use the plastic opening tool to getunder the connector piece. This willallow you to remove the front panelassembly from the rest of thedevice.

Step 7

Detach the connecter from theinside of the device.

Lift the screen to separate the frontpanel assembly from the rest of thedevice.

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 6 of 10

Page 7: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

Step 8 — Central Panel

Remove the 17 silver 3.0 mm Phillips head screws located around the edge of the device using thescrewdriver.

For additional information on how to remove screws, please refer to Screwdriver Best Practices.

Step 9

Remove the 2 centrally-located black 3.0 mm Phillips head screws using the screwdriver.

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 7 of 10

Page 8: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

Step 10

Use the plastic opening tools to gently separate the middle panel from the rest of the device.

Move the tool around under the edges until you can remove the panel by hand.

Popping/cracking noises are completely normal. These are the sounds of the panel separatingfrom the rest of the device.

Step 11

Lift up the central panel starting from one corner to separate it from the rest of the device.

Pull towards the top of the device as you lift out to ensure that the charging port connection is notdamaged.

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 8 of 10

Page 9: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

Step 12 — SD Card Reader

Insert the pointed end of the black spudger into the hole located on the right side of the device.

Use the spudger as a lever to remover the SD Card plastic piece from the reader.

Step 13

Use the plastic opening tool to unlock the SD card reader from the back panel.

Wedge the tool under the reader and gently lift up to pop it out.

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 9 of 10

Page 10: Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement · Use the plastic opening tool to unlock the SD card reader from the back panel. Wedge the tool under the reader and

To reassemble your device, follow these instructions in reverse order.

Step 14

Pick up the SD card reader with your fingers. There is no adhesive, so the reader will come offeasily.

Samsung Galaxy Tab S2 9.7 SM-T813 SD Card Reader Replacement Draft: 2018-08-01Guide ID: 108102 -

This document was generated on 2019-09-22 09:19:50 AM (MST).

© iFixit — CC BY-NC-SA www.iFixit.com Page 10 of 10