Upload
lediep
View
214
Download
0
Embed Size (px)
Citation preview
2016
CATALOG
FITTINGS AND ACCESSERIES
IN BRASS / STAINLESS STEEL
SAHARA EMIRATES
Contact Details:
Abu Dhabi: Dubai:
P.O.Box: 95331 P.O.Box: 47705
Tel: +97126221402 Tel: +97148809877
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
KSA: Qatar:
Mob: +966-550484483 Mob: +974-30458626
[email protected] [email protected]
www.saharame.com
1
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
Table of Contents|……………………………………………………………………………..........Page 1
INTRODUCTION……………………………………………………………………………………….2
1. Stainless Steel……………...……………….…………………………………………………………3
a) SS304 Flanges…………………………………………………………………………………...3
b) SS316 Flanges…………………...………………………………………………………………3
c) SS Nuts and Bolts………………………….…………………………………………………….3
d) SS Threaded Rods and Bar…………………………………….………………………………...4
e) SS Pipe………………………...……………………..…………………………………………..4
f) SS Tubes………………………...……………………………...………………………………..4
g) SS Fittings (Reducers, Tee, Elbows, Stub Ends, Couplers etc)…………………………..……..5
h) SS Threaded nipples…………..…………………………………………………………………5
2. Carbon Steel…………..……………………………………………………………………..………..6
a) CS Threaded Nipples..……..…………………………………………………………………….6
b) CS Fittings (Reducers, Tee, Elbows, Stub Ends, Couplers etc)………………………………....6
c) CS Pipe and Tubes……………………………………….……………………………………....7
d) CS Threaded Rods and Bar………………………………..……………………………………..8
e) CS Nuts and Bolts………………………..………………………………………………………8
f) CS Flanges…………….……………….…………………………………………….……….......9
3. Brass …………………………………………………………………………………………...……..10
a) Brass Water Meter Adopter (Extruder and casted)……………………….…………………......10
b) Brass Rod and Bar…..…………………………………………………………………………..10
c) Brass Fitting……………………….…………………………………………………………….10
d) Brass Gate-Check Valve………………………………………………………………………...11
e) Brass Nuts……………………………………..………………………………………………...12
f) Copper Tubes………………………………………….………………………………………...12
2
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
INTRODUCTION
M/S Sahara Emirates Involved in engineering supplies, infrastructure projects for
more than two decade with major approval of competent authorities, government bodies
in U.A.E and all over GCC.
Specialized in HDPE pipes, fittings, installations, inspection chambers, water
meters, valves, stainless steel flanges and piping systems.
M/S Sahara Emirates successfully completed timely bound technically challenging
project supplies.
M/S Sahara Emirates contracting is a reliable competent technical contractor and
supplier for irrigation, storm water networks, and sewerage and house connections.
Marine water intake lines, landscaping works are part of engineering services.
M/S Sahara Emirates enjoys the reputation, built over the years through big list of
satisfied customers all over GCC. We are committed to customer requirements and focus
on timely completion of projects supplies.
With the same commitment that we would always be focus to customer
requirements, we look forwards to receive enquires illustrated here in.
Sheikh Mujeeb
Group General Manager
Sahara Emirates
3
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
• 304 stainless steel
• Larger sizes available
• To ANSI/ASME B16.5 standards
• To BS10 table E standards
• To EN1092-1 Standards (Was BS4504)
• Sizes 1/2" to 8" (DN15 to DN200)
• Higher pressures available
• To BS4504 & DIN standards
• PN16 & ASA 150 LB rated
• 316 stainless steel
• Larger sizes available
• To ANSI/ASME B16.5 standards
• To BS10 table E standards
• To EN1092-1 Standards (Was BS4504)
• Sizes 1/2" to 8" (DN15 to DN200)
• Higher pressures available
• To BS4504 & DIN standards
• PN16 & ASA 150 LB rated
Finished Hex Nuts 304/316/316L
Rivet Nuts (Threaded Inserts)
Weld Nuts
Machine Screw Nuts
Hex Flange Locknuts
Clinch Nuts
1. STAINLESS STEEL
A. 304 SS FLANGES
B. 316 SS FLANGES
C. STAINLESS STEEL NUTS AND BOLTS:
4
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
Coupling Nuts
Panel Nuts
Heavy Hex Nuts
Stainless steel Thread rods
Stainless steel welded thread rods
Stainless steel special thread rods
Name: Stainless Steel Special Bars
Shape: trapezoidal steel, oval-shaped steel, steel
triangle, diamond-shaped steel ect.
Material: 304,304L, 316, 316L,
• Pipe Sizes 1/8" to 8" (DN6 to DN200)
• Pipe to ASTM A312 welded
• 316 & 304 stainless steel
• Larger sizes available
• Other grades available
• Tube Sizes 1/8" to 1" and 4mm to 42mm
• Tube to ASTM A269/A213 seamless
• 316 Stainless Steel
• Larger sizes available
• other grades available
D. STAINLESS STEEL THREADED RODS:
E. STAINLESS STEEL PIPE:
F. STAINLESS STEEL TUBE :
5
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
Product Description:
Connection type: Clamped, welded, threaded, flanged, etc
Specification: 1/2"-8", DN10-DN200, other sizes are provided according to customers' requirements
Material quality: SUS304, SUS316L
Polishing: Mirror polish, Matt polish
Standard: ISO, DIN, 3A, SMS, IDF, AS,
BS4825...
304/304L Stainless Pipe Nipples
316/316L Stainless Pipe Nipples
Schedule 40, Schedule 80, Schedule 160, XXH
5” and 6” Diameters Also Available
British Pipe Threading Available
G. STAINLESS STEEL PIPE FITTING :
H. STAINLESS STEEL NIPPLES:
6
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
Seamless Pipe Nipples - ASTM - A-106, Grade B
1/8” – 6” Diameters
Seamless – Black and Galvanized
Standard (Schedules 40, 80, 160 & XXH)
Custom Threads, British Pipe, Dry Seal, Straight-Running, Etc.
Carbon Steel Pipe Nipples – Domestic, Black, Welded
Black, Schedule 40 (Standard)
Black, Schedule 80 (Extra Heavy)
Galvanized, Schedule 40 (Standard)
Galvanized, Schedule 80 (Extra Heavy)
Ready Cut Pipe
Six Pack Assortments
Adapters – Male
Adapters – Female
Adapters – Male, Fitting End (Street)
Adapters – Hose
Adapters – Female, Fitting End (Street)
Adapters – Flush Valve
Adapters – Female, Bar stock
Adapters – Male, Bar stock
Adapters – Female Fitting End (Street), Bar Stock
Adapters – Male Fitting End (Street), Bar Stock
Bushings - Fitting Reducers
Bushings – Flush
Bushings – Flush, Bar Stock
Caps – Tube End Caps
Couplings
Couplings without Stop
Couplings – Long Repair (Slide)
Couplings – Eccentric
2. CARBON STEEL:
A. CS THREADED NIPPLES:
B. CARBON STEEL FITTINGS:
7
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
Couplings – Crossover
45° Elbows
45° Elbows – Street
90° Elbows – Short Radius
90° Elbows – Street
90° Elbows – Fitting End (Street)
90° Elbows with Drain
90° Elbows – Long Radius
90° Elbows – Long Radius, Fitting End (Street)
Plugs for Fitting, Fitting End Plugs
Return Bends
Sand Cloth
Sand Cloth – Mesh
Suction Line P Traps
Tees
Tees – Baseboard
Unions
Unions – Male
Unions – Female
Tees – Street
Tube Hanger Strap
Tube Straps
Unions – Bar stock
Feature:-
Size Range: In Seamless 1/2" to 24"
Size Range: In ERW, LSaw, SSaw, Spiral, DSaw, EFW 16" to 100"
Schedules : 20, 30, 40, Standard (STD), Extra Heavy (XH), 80, 100, 120, 140, 160, XXS & Up to
250MM Thk
Grades:
A 53, ASTM A 106 GR A/B/C,
AP15L Gr. B, X42, X46, X52, X56, X60, X65, X70 PSL 1 & PSL 2 WITH NACE MR 0175,
IS 3589 (BLACK GR 330 & GR 410) SAW 672.
A333 GR 1 & 6,
ASTM A 671 / 672 GRCB60 / CB60 / CC60 PIPE
St37, St52, St42, St45, St35.8, St37-2, St42-2, St45-
8St35.4,St52.4
C. CARBON STEEL PIPES & TUBES:
8
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
Grade and Quality:
200 series: 201, Y201Cu, 202 etc.
300 series: 301,303,304,304L.310.316.316L, 321
400 series: 410,416,420,430,430F, 431 etc.
Size and Diameter:
Hot-rolled bar: 5.5mm---110mm
Hot- forged bar: 110mm---400mm
Length including random length, specified length and multiple lengths
Random length should be no less than 1 meter/pcs, such as 3m-4m, 5m-6m
Our Cold Drawn bright round bar diameter range is 2mm---50mm, Center less Grinding Bright Bar
diameter range is 5mm---40mm, and Peeled Bright round bar diameter is from 40mm---300mm
Standard DIN ANSI/ASME GB JIS NON-STANDARD
Size M6-M40
Material carbon steel
Function Aatomobile,electronic,mechinery
Finish Plain, Y.Z.P., Black, Z.P.HDG inc plated,
Name bolt & nut
D. CARBON STEEL RODS AND BARS:
E. CARBON STEEL NUTS AND BOLTS:
9
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
Specification
Standard ANSI, JIS, DIN, EN1092-1, UNI, BS4504, SABS1123, AS2129, GOST-12820
Sizes 1/8" NB TO 24" NB
Class 150#, 300#, 400#, 600#, 900#, 1500# & 2500#.
Wall
Thickness
SCH.10, 20, 30, 40, 80, 120, 160, STD, XS, XXS.
Material ASTM A105, ASME A105, ASTM A266 GR.1, GR.2, GR.3, GR.4, ASTM A350 LF1,
LF2 CL1/CL2, LF3 CL1/CL2, ASTM A694 F42, F46, F48, F50, F52, F56, F60, F65,
F70
Form Slip on Flanges – SORF, Weld neck Flanges – WNRF, Socket weld Flanges – SWRF,
Blind Flanges – BLRF Lapped joint Flanges, Screwed Flanges, Long weld neck
Flanges, Reducing Flanges, Spectacle Flanges, Ring joint Flanges
F. CARBON STEEL FLANGES:
10
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
a)
Barbed PEX Adaptor
Size & Description Part # Ctn. Wt./lbs.
5/8" meter nut x 3/4" pex
adaptor
B-301X 360 64
3/4" meter nut x 3/4" pex
adaptor
B-302X 240 59
1" meter nut x 1" pex
adaptor
B-306X 100 36
Brass Rod Picture Grade OD Length
Round Brass Rod
C2200,C2600,C2620,
C2700,C2720,C2800,
C6870,C5190,C7700,
C7520,C1099,etc.
1-
150mm
1000-
12000mm
Square Brass Rod/Bar
C2200,C2600,C2620,
C2700,C2720,C2800,
C6870,C5190,C7700,
C7520,C1100,etc.
4-
150mm
2000-6000m
Hexagonal Brass
Rod/Bar
C3601,C3602,C3603,
C3604 C2680,C2700,
C2800 C3771
C36000,C37700
2-
90mm
1000-
12000m
solid brass rod
C3501 C3601 C3602
C3603 C3604 C3605
C3700 C3850
up to
150mm
2000-6000m
Brass Cap Nut
Brass Close Nipple
Brass Female Cross
Brass Hex Socket
3. BRASS:
A. BRASS WATER METER ADAPTOR:
B. BRASS RODS AND BARS:
C. BRASS FITTINGS:
11
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
Brass Female Pipe Tee
Brass Hex Nipple
Brass Stop Pipe Plug
Brass Socket Pipe Plug
Pex Copper Fitting Adapters
Brass Elbow
Drop Ear Elbows
PEX Ball Valves
Female Threaded Adapters
Pex Male Threaded Adapters
Pex Plugs
Brass Pex Couplings
Brass PEX Tees (3way)
Body: Brass
Size: 1/2” – 8”
D. BRASS CHECK VALVE:
12
------------------------------------------------------------------------------------------------------------ -------------------------------
Abu Dhabi: Dubai: KSA: Qatar: P.O.Box: 95331 P.O.Box: 47705 Mob: +966-550484483 Mob: +974-30458626
Tel: +97126221402 Tel: +97148809877 [email protected] [email protected]
Fax: +97126221403 Fax: +97148809699
[email protected] [email protected]
Brass nuts in various sizes m3 m4 m5 m6... Hex head bolts, Hex head set screws
Copper Tubing Sizes (CTS) for Plumbing[1]
Nominal
size
Outside diameter
(OD)
[in (mm)]
Inside diameter (ID)
[in (mm)]
Type K Type L Type M 3⁄8
1⁄2 (12.7) 0.402 (10.211) 0.430 (10.922) 0.450 (11.430)
1⁄2
5⁄8 (15.875) 0.528 (13.411) 0.545 (13.843) 0.569 (14.453)
5⁄8
3⁄4 (19.05) 0.652 (16.561) 0.668 (16.967) 0.690 (17.526)
3⁄4
7⁄8 (22.225) 0.745 (18.923) 0.785 (19.939) 0.811 (20.599)
1 1 1⁄8 (28.575) 0.995 (25.273) 1.025 (26.035) 1.055 (26.797)
11⁄4 1
3⁄8 (34.925) 1.245 (31.623) 1.265 (32.131) 1.291 (32.791)
11⁄2 1
5⁄8 (41.275) 1.481 (37.617) 1.505 (38.227) 1.527 (38.786)
2 2 1⁄8 (53.975) 1.959 (49.759) 1.985 (50.419) 2.009 (51.029)
21⁄2 2
5⁄8 (66.675) 2.435 (61.849) 2.465 (62.611) 2.495 (63.373)
3 3 1⁄8 (79.375) 2.907 (73.838) 2.945 (74.803) 2.981 (75.717)
E. BRASS NUTS:
F. COPPER TUBES: