SAHAND UNIVERSITY OF TECHNOLOGY Tabriz-IRAN

www.sut.ac.ir

SAHAND UNIVERSITY OF TECHNOLOGY

Tabriz-IRAN

Sahand University of Tecnology

Interna�onal Affairs, 40

Faculty of Civil Engineering, 20

Faculty of Polymer Engineering, 26

Faculty of Mechanical Engineering, 29

Faculty of Basic Sciences,23

Faculty of E-Learning & Center of Open Training, 36

Faculty of Petroleum and Natural Gas Engineering, 32

Central Library, 38

Faculty of Biomedical Engineering, 17

Faculty of Electrical Engineering, 14

Faculty of Mining Engineering, 11

Faculty of Chemical Engineering, 8

Facts and Figures , 2

President’s message, 3

Faculty of Materials Engineering, 5

Content

Sahand University of Tecnology1

Sahand University of Tecnology 2

Facts and Figures

Young Successful University in the age of 30th.First Technology University in North-West of Iran

US-News & World report (in Educa�on system in 2020)

Ranked #1299

Shanghai Ranking 2019 (the Academic Ranking of World Universi�es) 151-200 top Universi�es in Metallurgy Engineering 301- 400 top Universi�es in Chemical Engineering 401-500 top Universi�es in Energy Science and Engineering

History and rank

URAP ranking 2019-2020.(University Ranking by Academic Performance)

Ranked #1425 Ranked # 29 among Iranian Universi�es ISC(islamic world science cita�on center)

Ranked # 7 among Iranian Technical Universi�es

Campus University: 3 campuses in 3 loca�ons 11 Academic Facul�es2 Research Ins�tutes 32 Research Centers1 Center of ExcellenceMore than 100 Educa�onal and Research Laboratories3 Dormitories5 Student and 2 Staff Catering Public RestaurantCentral Library with two satellite branches (> 100,000 books and on-line resources)Indoor and Outdoor Sport Complex

In�rastructures

493 PhD students1497 MSc students 2556 BSc students 64 As students. Total: 4592Student/Professor ra�o: 26/1

Student community

240 PhD, 3657 MSc, 5841 BSc, 518 AsEmployability rate :100% PhD, 93% MSc and 87 BSc

13 start-up companies30 spin-out companies14 technology transfer companies

43/43/87/7 Full/Associate/Assistant Professor169 Staff349 Total

Alumni

Innova�on and incuba�on centerAcademic Members and Staff


President’s message

Sahand University of Technology (SUT) was established in 1989 in Tabriz, the capital of art and technology in Iran. SUT is a State university opera�ng under the rules of the Ministry of Science, Research and Technology of Islamic Republic of Iran with integrated and sophis�cated campus facili�es. The academic ac�vi�es of SUT are conducted in three campuses including Sahand Campus located in Sahand new town 25 km of Tabriz in an area of 400 hectares comprised of central manage-ment, administra�on, educa�onal and research units and academic facul�es, Tabriz Campus located in industrial part of Tabriz, comprised of Electronic Learning Center, Technology Incuba�on Center including spin-out companies and Open Training Center, and Varzeqan Campus, so called Varzeqan Technical College located in Varzeqan in the vicinity of Sungun copper mine located in 97 km of Tabriz, offering technology and engineering educa�on. SUT operates academic facul�es and research ins�tutes and centers to provide educa�on and research ac�vi�es. SUT offers over 20 BSc programs and more than 100 graduate programs of study in engineering, science and technology. More than half of students are enrolled in post-graduate courses. Our 190 outstanding mostly young academic staff along with a few thousand research associates, post-doctoral and post-graduate students conduct research in 32 research centers in various areas including Oil and Gas, Nanotechnology, Renewable Energy, ICT, Environment, Biotech-nology, Mineral Processing, Advanced Materials, Structures, Automo�ve, Medical Engineering and Produc�vity and have been able to performing finalized or in progress research projects with an overall number of more than 400. I would like to say that SUT is proud of being the first organiza�on to ini�ate the crea�on of self-funded demand-driven research centers being independent of the government funds. In this regard, the research ac�vi�es are funded solely through one-to-one contracts with various industries and companies.


Towards the 4th genera�on university, the Innova�on and Entrepreneurship Center, in the frame-work of student team-works, empowers students with required skills. SUT has taken ac�on by leveraging university's growth and innova�on center establishing 30 spin-out technology companies, 12 of which have become knowledge-based corpora�ons. In addi�on, SUT’s significant prac�cal technology-based par�cipa�on has been realized in the major na�onal projects of oil recovery in Soroush oil field, nano and biotechnology products and water purifica�on.

Furthermore, SUT’s academic staff and students have been awarded many na�onal and interna�on-al prizes and dis�nc�ons including Energy Globe World award, Green Produc�vity Specialist of APO, the country top professor award in years 2010 and 2018, the country top researcher award in Years 2011 and 2017, the Iranian academy of science dis�nguished young researcher awards in years 2011 and 2017, membership of 7 faculty members in specialized higher educa�on commi�ees of the country, as well as numerous student rewards received by student teams in na�on-wide science and sport compe��ons.

More recently, SUT appreciate interna�onal scien�fic collabora�on via either enhancing or launch-ing memorandum of understanding with foreign universi�es in order to establish the framework of admi�ng interna�onal students, and conduc�ng joint research projects amongst science and technology disciplines.

Prof. Ahmad-Reza Mostafa Gharabaghi, PhDPresident of Sahand University of Technology

Faculty of Materials Engineering

Faculty of Materials Engineering, Sahand University of Technology, 5133511996, Tabriz, IranTelephone number:+984133459458

Fax Number: +984133444334Email: [email protected]

Website: h�p://mae.sut.ac.ir/


Introduc�on

Undergraduate Course Structure

The Faculty of Materials Engineering at Sahand University of Technology was founded in 1990 and is the oldest and most famous faculty of Materials Science and Engineering in northwest of Iran. At present, the faculty consists of 18 full-�me academic members including 8 Full Professors, 3 Associ-ate Professors and 7 Assistant Professors. More than 330 undergraduate and 300 graduate students are enrolled in BSc course of Metallurgy Engineering, MSc courses of NanoMaterials, Corrosion, Extrac�on metallurgy, Foundry and Cas�ng, Welding and Materials’ Selec�on and Characteriza�on and PhD course of Materials Science and Engineering in this faculty. Materials is a research leading faculty with dis�nguished publica�ons and research outcomes worldwide. This faculty was ranked among top 151-200 in the world in the Metallurgy Engineering subject in 2019 by ShanghaiRanking (the Academic Ranking of World Universi�es).

Major 1st year 2nd year 3rd year 4th year

Metallurgical Engineering

General Calculus I, IIGeneral Physics I, IICrystallography and Lab.Sta�csPhysics Lab.General Chemistry Lab.Physical Educa�on IGeneral ChemistryIndustrial DrawingGeneral WorkshopHistory of Materials Engineering and Metallurgy

Physical Proper�es of Materials I, IIEngineering Mathema�csBasics of Electrical EngineeringMaterials Mechanical Proper�es IMaterials ThermodynamicsPrinciple of Metals Solidifica�on and cas�ngMetallography Lab.Differen�al EquationsMechanics of MaterialPhysical ChemistryComputer Programming

Kine�cs in Materials EngineeringElectrochemistryMetals Forming ICeramics and Refractory MaterialsWeldingHeat Treatment Lab.HydrometallurgyBasics of Electrical Engineering Lab.Transport PhenomenaCorrosion and Protection of MetalsMechanical Proper�es Lab. IPyrometallurgyMechanical Proper�es IICast Iron and Steel Cas�ngHeat TreatmentNumerical AnalysisSolidification and Cas�ng Lab.

Powder MetallurgyProjectIndustrial InternshipsSurface EngineeringMaterials Analysis TechniquesSelec�on of Engineering MaterialsNon-Destruc�ve TestsNon-Ferrous AlloysCompositesProduc�on of Non-Ferrous MetalsMetals Produc�on Lab.Scien�fic Communica�on Skills

MSc program PhD program

• Characteriza�on and Selec�on of Engineering Materials

• Corrosion and Protec�on of Metals• Cas�ng• Nano-Materials• Welding•

• Materials Engineering

Graduate Programs Research CentersResearch Center of Advanced Materials & Mineral Processing (RCAM) Nanostructured Materials Research Center



Research Laboratories

Research Facili�es

Dis�nc�on

Metallography Lab. Mechanical Proper�es Lab. Heat Treatment Lab. Materials Forming Lab. Materials Characteriza�on (SEM-XRD-DSC) Lab. Extrac�ve Metallurgy Lab. Corrosion and Coa�ngs Lab. Nano-Materials Lab. Welding Lab.

Scanning Electron MicroscopeX-Ray Diffrac�onDifferen�al Scanning CalorimetryOp�cal Microscopes and Metallography equipmentUniversal Tensile Test (3 devise-2, 5 and 10 tons)Fa�gue testUniversal Hardness TestMicrohardness testCharpy Impact testHeat Treatment Furnaces (atmosphere control, under vacuum, different temp. up to 1700 ᵒC)Freeze DryerOvens (up to 300 ᵒC, Under Vacuum)

Vacuum Induc�on Mel�ngInduc�on Mel�ng (100 Kg)Complete Cas�ng Sand Tes�ng equipmentWelding Rec�fiers (AC, DC)Welding Machines - MIG/MAG – TIGSubmerged-arc weldingSpot Resistance WeldingFric�on S�r Welding /ProcessingUV-Visible SpectrophotometerPoten�ostat/Galvanostat Electrochemical Instru-ment (3 different brands)Hydraulic Press (5, 100, and 200 tons)Rolling Mill Machine

Shanghai Ranking 2019 (the Academic Ranking of World Universi�es) 151-200 top Universi�es in Metallurgy Engineering

Faculty of Chemical Engineering


East Azarbaijan, Tabriz, Sahand New Town, Sahand University of Technology, Faculty of Chemical EngineeringTelephone number: 041-33459152

Fax Number: 041-33444356Email: [email protected]

Website: h�p://fa.che.sut.ac.ir


As part of the first and largest Iranian technical university in the west-northern of I.R. Iran, Faculty of Chemical Engineering has started its educa�onal ac�vi�es since 1992 by admi�ng BSc students in Petrochemical industry major. The Chemical Engineering Faculty also conducts MSc and Ph.D programs from 1994. E-learning educa�onal ac�vi�es of this faculty have also been started since 2011 in BSc and MSc degrees. The faculty is currently home to more than 550 students (310 BSc, 170 MSc and 70 Ph.D). The chemical engineering faculty with 28 academic members (8 full profes-sor, 9 associate professor and 11 assistant professor) is one of the pioneering facul�es in educa�on, research and knowledge base technologies in the country. In addi�on to offering graduate programs in chemical engineering, the faculty provides academic exper�se and support to mul�disciplinary bio and nanotechnology engineering programs of Sahand technical university and also supports novel techniques for treatment and recycling (reusing) of water and wastewater.

Introduc�on


Graduate Programs Research CentersEnvironment Research CenterBiotechnology Research CenterReactor & Catalyst Research CenterMembrane Technology Research CenterNanostructure Materials Research CenterTissue & Stem Cell Engineering Research CenterTransport Phenomena Research Center

Major 1st Year 2nd Year 3rd Year 4th year

Chemical Engineering

General Mathematics (I, II) Fluid Mechanics (I, II) Mass Transfer Unit Opera�ons (II)

General Chemistry Engineering Mathematics Physical Chemistry Process Controls

Physics (I) and Lab Physics (II) and Lab Heat Transfer (II) Plant Design and Economics

Introduc�on to Chemical Engineering

Thermodynamics (I,II Analy�cal Chemistry Laboratory Process Controls Laboratory

Computer Programming Technical Drawing Fluid Mechanics Laboratory Unit opera�ons Laboratory

Differen�al Equa�ons General Workshop Sta�cs and Strength of Materials BSc. Project

Mass and Energy Balance Analy�cal Chemistry Kine�cs and Reactor DesignChemical Engineering So�ware Workshop

Engineering So�ware Workshop Heat Transfer (I) Unit Opera�ons (I)

Organic Chemistry Numerical Calcula�onsApplica�on of Mathematics in Chemical Engineering

Organic Chemistry Laboratory Heat transfer Laboratory

MSc PhD

Thermodynamics and CatalysisChemical Engineering

Process Design

Separa�on Processes

Transport Phenomena

Environmental Engineering

Food Industry

Biotechnology



Educa�onal Laboratories

Water and wastewater Technical Clinic

Dis�nc�onShanghai Ranking 2019 (the Academic Ranking of World Universi�es) 300-400 top Universi�es in Chemical Engineering

Analyses Services Lab.General Services Lab Research Lab IResearch Lab II

General Labs: General Chemistry Lab Organic Chemistry Lab Analy�cal Chemistry Lab Physico-Chemistry Lab

Technical Labs: Fluid Mechanics Lab Heat Transfer Lab Unit Opera�on Lab Process Control Lab

Faculty of Mining Engineering

Sahand New Town, Sahand University of Technology, Mining Engineering FacultyTelephone number: 33459288-041


Website:h�p://fa.mie.sut.ac.ir/index.aspx


Shanghai Ranking 2019 (the Academic Ranking of World Universi�es) 300-400 top Universi�es in Chemical Engineering


Introduc�on


Graduate Programs Research Laboratories

Program 1st year 2nd year 3rd year 4th year

Mining Engineering

• Calculus I, II• Physics I, II• General chemistry• General geology• Geology in mining

engineering• Industrial Drawing and CAD,

Sta�cs• Computer programming• Mineralogy• Acquain�ng of mining

Engineering& mining Industries

• Strength of materials• Differen�al Equa�ons• Probability and sta�s�cs

for engineers,• Petrology, and Lab• Op�cal and process

mineralogy and Lab• Structural geology,• Fluid Mechanics• Thermodynamic• Mine surveying and field

opera�on,• Mine Economics,• Economic geology• Technical Services in

Mines

• Cartography• Hydrogeology and

Dewatering,• Explora�on Geochemistry• Explora�on geophysics and

Field survey• Rock Mechanics & Laboratory• Mineral processing and

Laboratory• Drilling Engineering• Blas�ng Engineering, Field

Geology,• Remote Sensing • Materials Handing,• Flota�on and Laboratory• Ground control and

Suppor�ng-• Mine Ven�laion,

• Surface Mining,• Sha� and underground

excava�on,• Principles of

Hydrometallurgy,• Principles of explora�on

& ore reserve evalua�on,Underground Mining,

• Mine Design,• Safety Health and

Environment in Mines• Geotechnics,

MSc program PhD programExplora�on Explora�on

Extrac�on Extrac�on

Rock Mechanic Rock Mechanic

Mineral processing Mineral processing

MSc program

The Faculty of Mining Engineering is one of the most pres�gious colleges of this university and one of the most prominent colleges in Iran known among the specialists in this field in Iran. This faculty is successful in research evidenced by publica�ons per each year. It has 19 faculty members and conducts BSc, MSc, and PhD programs in Mining Engineering in different subjects of Explora�on, Extrac�on, Rock Mechanics and Mineral processing. The faculty also offers trends in mining, mineral processing and rock mechanics. It is worth no�ng that this college includes another subdivision located in Varzaqan. This course offers associate degrees.

Rock Mechanics HydrometallurgyMineral Biotechnology Surveying


Undergraduate Program Details

Research facili�es

Varzeqan CampusTechnical College of Varzeqan

Technical College of Varzeqan started its ac�vity under the supervision of the Faculty of Mineral Engineering in the academic year 2004-05 with the admission of Associate in the two fields of Mining and Mineraliza�on (Mineral Processing). This college is located in the Sungun Copper Mining Complex in the region, known as the Red Gold of Iran and benefits from its dis�nct 5 faculty mem-bers as well as the faculty members of the Faculty of Mining Engineering of Sahand University of Technology. Currently the college operates one associate program with a student popula�on of 110.The loca�on and prac�cal coursed conducted dis�nguishes this college in this region and is very important in the cultural and scien�fic development of Arasbaran. The facili�es of the Varzaqan Technical college include libraries, laboratories such as chemistry, physics, electrical workshops, forging and lithology, compu�ng center, self-service and amphitheater, prayer rooms and training centers. The school is located in the best part of the tourist city of Varzaghan, which has tourist a�rac�ons such as Chichkolu, Jushin Fortress, Amir Arshad Palace, Sogandel Village Inscrip�on and lush Arasbaran forests.

Rock coring and cu�ng equipment;Index tests (Water content, Porosity, Degree of satura�on, and Dry and Saturated Unit Weights);Uniaxial Compressive Strength (UCS) Test with Young’s Modulus Measurement;Triaxle Compressive Test;Direct Shear Test on Joints;Brazilian Tensile Strength Test (BTS);Point Load Strength Test;Schmidt Hammer Rebound Hardness Test;

LCPC Rock and Soil Abrasively test.electronic total sta�onelectronic theodoliteautoma�c levelland chainsteel and fiber glass taperanging poleGPS receiver and accessoriesP-Wave Velocity Test;Rock Permeability Test;

Program Admission from

Associate Mineral processing 2004

BSc (from Associate) Health and Environment 2020

BSc Industrial safety Engineering 2020

Major

Faculty ofElectrical Engineering

Sahand New Town, Sahand University of TechnologyTelephone number: +984133444322


Website: h�p://ee.sut.ac.ir/



Introduc�on

Research Centers


Graduate Programs

The School of Electrical Engineering has started its educa�onal ac�vity from 1994 with the admis-sion of 30 students in Control Engineering. The school currently has around 30 faculty members with more than 254 undergraduate students and 271 postgraduate students in Electrical Engineer-ing and Computer Science with majors ControlEngineering ,Power Systems Engineering, Telecommu-nica�ons Engineering, Electronic Engineering, andinforma�on technology engineering.

ICT MicroelectronicsSustainable EnergyAdvanced Power ElectronicsRobo�c GroupComputer VisionAdvanced Control


Power system (some of courses)

Engineering drawing Electromagne�csElectric circuits Signals and SystemsDigital systems

Analyses of Electric Power SystemsPrinciples of telecommunica�on systemsLinear Control SystemsIndustrial Electronics

Protec�on RelaysHigh Voltage Insula�on SystemsElectrical Power Genera�onAdvanced electric machines

Control(some of courses)


Industrial controlIndustrial Automa�on and ControlLinear Control SystemsIndustrial Electronics

Digital control systemsModern control systemsNonlinear control systemsElectronic Instrumentation

Electronic(some of courses)


Pulse and Digital CircuitsDigital ProcessingOptoelectronicsMicro-Electro-Mechanical Systems (MEMS)

Physical electronics

CircuitsMicroprocessor System Design

Digital System Design

Telecommunica�ons(some of courses)


Principles of telecommunica�on systemsFields and waveDigital communica�onDigital Signal Processing

Circuits Cellular communica�onTelecommunica�on networks

MSc program PhD programElectronic Engineering(some of courses)

Electronic Engineering(some of courses)

Control (some of courses) Control (some of courses)



Informa�on Technology(some of courses)

Informa�on Technology(some of courses)

Power (some courses) Power (some courses)



Research LaboratoriesMicroprocessorMeasurement and CircuitDigital Electronics and MicroprocessorsElectric MachinesComputer NetworksReal-Time Industrial SystemsNano-Op�cs and PhotonicsOptoelectronics and Nanophotonics

DC Power Supplies Signal generatorOscilloscopeMul�meterTNM2000 programmerNetwork AnalyzerFrequency Counter

Antenna TesteGunn Power supply & RF MeterHot Air Blower Extended circuit based on FPGA chipDSP ProcessorSpectrum AnalyzerAnd so on

Digital ControlIndustrial ElectronicsIndustrial ControlElectronic Physiology MicroelectromechanicalWireless Communica�ons and Signal ProcessingPower Electronics

Faculty ofCivil Engineering

Faculty of Civil Engineering, Sahand New Town, Tabriz, Iran, Postal Code: 5331817634Telephone number: +984133444344


Website: h�p://fa.cie.sut.ac.ir/index.aspx



Introduc�on

Research Centers


Graduate Programs

Faculty of Civil Engineering started its academic ac�vi�es in the academic year of 1998-99 with the admission of 4 MSc students in Structural Engineering and currently have undergraduate course in Civil Engineering, and MSc courses in Structural Engineering, Earthquake Engineering, Geotechnical Engineering, and Offshore Structural Engineering, as well as PhD courses in Structural Engineering, Geotechnical Engineering, Water and Hydraulic Structural Engineering and Coasts, Ports and Marine Structural Engineering. The faculty has 12 faculty members including 5 Full Professors, 2 Associate Professors, 4 Assistant Professors and one lecturer. It provides to students the educa�onal and research services through the concrete and geotechnical, structural, hydraulic and fluid mechanics labs. The Seismic and Seismological Engineering, Building Materials, Offshore Structures Research Centers as well as Structural Health Monitoring Research Group operate under the framework of this faculty.

Earthquake Engineering Research CenterAdvanced Building Materials Research GroupOffshore Structures Research CenterStructural Health Monitoring Research Group


Civil Engineering

Calculus (I, II)Physics (I, II)Physics LabEngineering Drawing of BuildingsEngineering GeologyDifferen�al Equa�onsSta�csComputer ProgrammingConstruction Materials and Lab

Numerical ComputationEngineering Probability and Sta�sticsMechanics of Materials (I, II)DynamicsSurveying Theory and Prac�ce (I)Architectural and Urban DesignEnvironmental EngineeringConcrete TechnologyFluid MechanicsSoil Mechanics Concrete Technology LaboratoryMechanics of Solids LaboratorySystems Engineering

Hydraulics and LabReinforced Concrete Structures (I)Steel Structures (I, II)Fluid Mechanics LaboratoryTechnical Language (English for Civil Engineers)Soil Mechanics LaboratoryReinforced Concrete Structures (II)Founda�on EngineeringFundamentals of Wind and Earthquake EngineeringRoad Construc�onEngineering Hydrology

Pavement EngineeringComputer Applica�on in Civil EngineeringLoading on Building StructuresFundamentals of Tunnel EngineeringFundamentals of Dam EngineeringResistant Masonry StructuresProject Evalua�on and Cost Es�mationWater and Wastewater Engineering and ProjectConstruction Methods of BuildingsFundamentals of Construction ManagementEngineering EconomicsReinforced Concrete Structures ProjectSteel Structures ProjectHighway Engineering ProjectHydraulic StructuresFundamentals of Bridge EngineeringGeneral Civil Engineering Workshop


Structural EngineeringEarthquake EngineeringGeotechnical EngineeringOffshore Structural Engineering

Structural EngineeringGeotechnical EngineeringWater and Hydraulic Structural EngineeringCoasts, Ports and Marine Structural Engineering




Structural and Mechanics of Materials LaboratoryConcrete and Construc�on Materials LaboratorySoil and Rock Mechanics and Geotechnical LaboratoryFluid Mechanics and Hydraulics Laboratory

Universal Tes�ng Machine (UTM)Strong floor laboratory with loading frames and hydraulic actuatorsDisplacement and strain measuring and load cell facili�esData acquisi�on systemHydraulic jacks, mixer and curing equipmentWave-current (flume) channels, Water jet apparatus, Bourdon barometerVortex apparatusConsolida�on apparatusSta�c three-axial test apparatusSoil and rock direct Shear TestGraining sievesShear wave velocity test (Ultrasonic test)Schmidt hammer testUniaxial compressive test

Faculty ofPolymer Engineering

Sahand University of Technology, New Sahand Town, Tabriz, Iran Telephone number:00984133459091

Fax Number:00984133454313Email: [email protected]:fa.polymer.sut.ac.ir



Introduc�on


Graduate Programs Graduate Programs (PhD)

The Faculty of Polymer Engineering launched in 2008 is one of the two independent facul�es of Polymer in Iran accredited by the Ministry of Science, Research and Technology of Islamic Republic of Iran. As a research leading academic faculty, it has been very successful in publishing scien�fic ar�cles, contribu�on to interna�onal conferences, performing research projects, and filing patents and has dis�nguished researchers and students. The faculty has 4 Full Professors,3 Associate Profes-sors and8 Assistant Professors and conducts educa�on programs in developing branches of polymer technology such as Nanotechnology, Biocompa�ble Polymers, and also Polymeriza�on Engineering, and Paint Technology. The current student popula�on of this Faculty is 150 BSc, 130 MSc and 40 PhD students.


polymer Principle of Process Calcula�onEngineering ThermodynamicsPolymer Chemistry

Physical Chemistry of Polymers

Color Physics and Principles of Appearance

Proper�es and Applica�ons of Natural Polymers

Physical and Mechanical Proper�es of PolymersFundamental of Rheology

Polymer Characteriza�on

Technology of Organic Coa�ngs

Principle of Process Calcula�on

Chemical Reac�ons Engineering

Modeling of Polymeric Systems

Instrumentation and Control of Polymeric Processes

Plas�c Engineering

Composite Engineering

Rubber Engineering

Polymerization Engineering

Fiber Engineering

Adhesives, Resins, and Foams

Polymers in Colloidal Systems

MSc program 1st year 2nd year

Paint 7 8Polymeriza�on 5 11process 16 35Chemical Engineering-polymer 12 18

PhD program 1st year 2nd year 3rd year 4th year

Polymer 7Nanotechnology 1 2Chemical Engineering-polymer 3 2 1Polymer processing 1 3Polymer Industries 3



Ins�tute of Polymeric Materials (IPM)

Research Centers

Ins�tute of Polymeric Materials (IPM) was established in 2002. The IPM started its work with two MSc programs in chemical and polymer engineering. Presently the IPM employs ten doctoral research associates, twelve Ph.D. candidates, twenty MSc students, and two technicians. In 2003 IPM got the permission of research center of polymeric materials from Sahand University of Technol-ogy (SUT).In 2003 IPM got the permission of research center of polymeric materials from ministry of science, research, and technology (MSRT) of Iran. In 2007, IPM was re-evaluated by ministry and promoted from research center to ins�tute. The main objec�ves of the IPM are to carry out innova-�ve, collabora�ve research work, the results of which can be applied to the long-term needs of the country specially west north regions of Iran in polymer and rela�ve industries with special emphasis given in the area of up-stream products (polymer reac�on engineering) and down-stream ac�vi-�es (polymer processing). In 2010, IPM was selected by the MSRT as a Scien�fic Pole (Excellent Center) named “Styrenic polymers” of the country. IPM collabora�ons with industries are mainly focused on research projects, internship plans, flagship plans, short courses, and reference labs.

Ins�tute of Polymeric Materials, Sahand University of Technology Postal code: 5331711111 Sahand New Town, Tabriz, East Azarbaijan, Iran.Email: [email protected]: +98 412 345 9090 +98 412 345 8170 +98 412 345 8217Fax: +98 412 344 4313Web site: h�p://ipm.sut.ac.ir

Ins�tute of Polymeric Materials (IPM), Nanostructured Materials Research Center (NMRC),

Faculty of Polymer Engineering have many research facili�es such as Centrifuge (12000 Rpm), Furnaces, S�rrers, Ultrasonics (Bathroom and Probe), Ovens, Incubator, UV-VIS-NIR spectroscope, UV Box, MFI analysis, Vicat & HDT analysis- Impact Tes�ng, etc

Laboratory of Mechanical-Physical Proper�es of Polymers, Chemistry of Polymers, and Polymer Processing. Paint technology (Under development).

Faculty ofBasic Sciences

Sahand university of Technology, Sahand New Town, Tabriz, Iran.Telephone number: 041-33459072


Website: h�p://fa.sci.sut.ac.ir/index.aspx



Introduc�on


The development of science brings about the refinement of our perspec�ve on nature and encourag-es us to exploit the future. The power of numbers and formulas is so strong that, sooner or later, applica�ons appear with n great expecta�ons. The faculty of Basic Sciences was launched along with the founda�on of SUT in 1989. In addi�on to conduc�ng taught fundamental courses of mathemat-ics and physics to all engineering students, it is a dynamic research oriented faculty, commi�ed to ensuring an outstanding learning experience for its students. Masters programs in Mathema�cs and Physics have been started since 2004 and 2005, respec�vely. Currently all programs are admi�ng students at all levels of BA, MSc and Ph.D. as well as postdoctoral researchers in Mathema�cs and Physics. The faculty has more than 24 full �me faculty members, 256 students and have had 379 Ph.D. and Masters graduate by the date. . In addi�on to regular lectures and workshops given by na�onal and interna�onal mathema�cians, 14th Iranian Conference on Fuzzy Systems was hosted by the faculty of science in August 2014. The faculty consists of teaching laboratories in Physics and research Laboratories of Plasma Physics and Solid Physics order to conduct frui�ul research and a�ract scien�fic talent including and has achieved magnificent research output including high quality publica�ons, hot papers and na�onal awards. The faculty of Basic sciences is commi�ed to improve University’s standards to highest professional level by hard working for be�er future in Science and Technology.


Mathema�csand

Applica�ons

Calculus I , IIPhysics I, IIFundamentals of mathema�cal ScienceBasics of computerBasic EconomicsPhysics Lab Fundamentals of probability

Calculus IIIDifferen�al equa�onsFundamentals of numerical analysisProbability IFundamentals of matrices and linear algebraFundamentals of mathema�cal analysisIntroductory number theoryFundamentals of algebraLinear op�miza�onMathema�cal training

Mathema�cal analysis AlgebraFundamentals of combinatoryNumerical linear algebraFundamentals of geometryAdvanced programingPar�al differen�al equa�onsComplex func�onsSta�s�cal methods

General topologyLocal differen�al geometryThe theory of ordinary differen�al equa�onsNonlinear op�miza�onMathema�cal so�wareData structures and algorithmsGraph theory and applica�onsNumerical solu�on of differen�al equa�onsMathema�cal history




Graduate Programs

Research Laboratory of Solid State PhysicsResearch Laboratory of Plasma PhysicsResearch Laboratory of characteriza�on

MSc program PhD

Applied Mathema�cs (Op�miza�on)

Mathema�cs:1. Numerical Analysis2. Op�miza�on3. Differen�al Equa�ons And Dynamical Systems4. Algebra5. Analysis

Pure Mathema�cs (Algebra)

Applied Mathema�cs (Differen�al Equa�ons And Dynamical Systems)

Pure Mathema�cs (Analysis)

ProgramBSc

1st year 2nd year 3rd year 4th year

Physics Calculus I , IIPhysics I, II, IIIGeneral Chemistry Differen�al equa�onsPhysics Lab I ,II

Basics of compu�ngMathema�cal physics !, IIAnaly�cal mechanics I, IIPhysics IVPhysics Lab III

Electromagne�cs I, IIQuantum mechanics I, IIAstrophysicsOp�csSolid State Physics

Par�cle physicsSolid sate physics lab.Selec�ve cources

MSc, PhD Condensed Ma�erPar�cle PhysicsPlasma Physics

Faculty ofBiomedical Engineering

Address: Telephone number: +9841-33458453

Fax Number: +9841-33444360Email: [email protected]

Website: h�p://fa.bme.sut.ac.ir/



Graduate Programs

Introduc�onHaving started its academic roles in 1997 by admi�ng BSc students of Bioelectrical Engineering, Faculty of Biomedical Engineering began its ac�vi�es independently in 2017 as the second dis�nct Biomedical Engineering faculty in Iran accredited by the Ministry of Science, Research and technolo-gy of Islamic republic of Iran. The faculty aims at training talented biomedical engineers with B.Sc., M.Sc. and Ph.D. degrees with two majors of Biomechanics and Bioelectric serving industry and academia. At present, the faculty benefits from11 full-�me academic members including one Full Professors, 2 Associate Professors and 8 Assistant Professors. The strategic loca�on of the university in the north-west region of the country and sharing border with neighboring countries provides promising opportuni�es for biomedical engineering faculty to become a scien�fic hub in both na�onal and interna�onal levels to exchange knowledge and exper�se in the field.

BSc Course

1st year 2nd year 3rd year 4th year

Bioelectric Mathema�cs I , IIPhysics I,IIBasics of chemistry IDifferen�al equa�onsBiostatistics and probabilityComputer programmingInforma�on Technology

Electrical CircuitsSta�cs and strength ofmaterialsBiochemistryAnatomyPhysiologyMedical physicsPrinciples of rehabilita�on and devices

• Protec�on, safety and general standard in clinical environment

• Fundamental of radiology and radiotherapy systems

• Electronics• Biophysics• Clinical Equipment• Linear control systems• Introduc�on to

biological modeling,• Introduc�on to image

processing,• Internship

Research methodology in biomedical engineeringMicroprocessorIIntroduc�on to Ultrasound and Its Applica�ons in Biomedical Engineering,Introduc�on to Computational IntelligenceBSc Project

Bio-mechanics

KinsiologyDynamics in Biomedical EngineeringFluid MechanicsThermodynamics in biomedical engineeringFundamentals of Biomechanics IVibra�onsHeat and mass transfer phenomena in biological systemsIndustrial DrawingInternshipStrength of Materials

BiophysicsResearchmethodology in biomedical engineeringFundamentals of Biomechanics IIPart design principles in BiomechanicsAutomatic controlStrength of materials laboratoryBSc Project


Research LaboratoriesResearch Centers

Graduate Programs

Biomedical Engineering Research CenterMedical Data Acquisi�on and ProcessingMechanics of Biological Systems

Brain Mapping Research Lab.Medical System Modeling Research Lab.Bio-compu�ng Research Lab.Medical Signal and Image Processing Research Lab.Tissue Mechanics Research Lab.Biological Fluid Mechanics Research Lab.Biomechanics of Human Movements Research LabBiomechanics-Robo�cs Research Lab.Gait Analysis Research Lab

MSc program (2 years) PhD program (4 years)

Bioelectric Bioelectric

Biomechanics Biomechanics

Faculty ofMechanical Engineering

Tabriz, Sahand University of Technology, Faculty of Mechanical EngineeringTelephone number: +98-4310 3344 41

Fax Number: 04133224950Website: h�p://fa.mech.sut.ac.ir/



Research Centers


Graduate Programs

Introduc�onThe Faculty of Mechanical Engineering at Sahand University of Technology began its ac�vi�es from 2003 at the B.Sc. level followed by conduc�ng programs at the M.Sc. and Ph.D. levels. The B.Sc. Programs consist of three majors including Thermo-fluids Mechanics, Applied Mechanics and Auto-mo�ve Engineering. M.Sc. and Ph.D. programs provide strong theore�cal basis with an emphasis on high-tech fields including prac�cal experience and numerical analysis. The Faculty has over 20 academic staff and 600 students and conducts advanced lectures, laboratory classes and tutorials. Moreover, the faculty has research grants from the governmental sectors and private industries to serve projects. The faculty has very good research outputs evidenced by published papers in respec-�ve domes�c or interna�onal journals, or contribu�ons at interna�onal and domes�c conferences.

Vehicle Research Centers (VRC)


Mechanical Eng. General Mathema�cs I Computer Programming Design of Machin Element II Technical English

General Mathema�cs II Material science Thermodynamics II mandatory course2

General Physics I Strength of materialsI Fluid mechanics II Op�onal Courses 1

General Physics II Strength of materials II Mechanical Vibra�ons Project

Chemistry Dynamics Fundamentals of Electrical Engineering II Dynamics & Vibra�on Lab.

Engineering GraphicsI Physics laboratoryI Strength of materials lab.Management and project control

Engineering Graphics I Thermodynamics IFundamentals of Electrical Engineering Lab. Op�onal Course 2

Diffren�al Equa�ons Numerical Computa�ons Machinery Dynamics Op�onal Course 3

Sta�cs Engineering Mathema�cs Automa�c control Op�onal Course 4

Physics laboratoryI Design of Machin Element I Heat transfer I Op�onal Course 4

Fluid mechanics I Thermodynamics Lab.Fundamentals of Electrical Engineering I Fluid mechanics Lab.

mandatory course I


Applied Design-Solid Mechanics Applied Design-Solid Mechanics

Applied Design-Dynamics and Control Energy Conversion

Aerospace-Structures Applied Design-Dynamics and Control

Energy Conversion

Vehicle Power Train Systems

Energy Systems


Research Laboratories Research facili�esDynamic Behavior of Materials (DBM)Cogenera�on Cooling, Heat and Power (CCHP)Advanced Heat Transfers (AHT)Mechatronics & Vibra�ons (M&V)

Autoclave MachineUniversal Tensile TestUltrasonic MixerDrop MachineAvon VacuumLow Speed Impact TestVehicle suspension TestVehicle Braking and turning Test

Faculty ofPetroleum and Natural Gas Engineering

Tabriz, Sahand University of Technology, Faculty of Mechanical EngineeringTelephone number: +98-4310 3344 41

Fax Number: 04133224950Website: h�p://fa.mech.sut.ac.ir/




Graduate Programs

Introduc�on The Faculty of Petroleum and natural Gas Engineering (PNGE) at Sahand University of Technology (SUT) officially opened and started its individual ac�vi�es since Aug. 2017. The history of the exis�ng faculty dated back to 1993 when the main core of the Petroleum Engineering team was established inside the Faculty of Chemical Engineering. The first students in the field of Petroleum Engineering were entered to SUT in 2003. PNGE is now a part of Soroosh oil field development team, in corpora-�on with Iranian Offshore Oil Company (IOOC), therefore PNGE welcomes to mutual coopera�on with interna�onal companies with a good reputa�on in the area of petroleum engineering. PNGE admits undergraduate and post graduate students (Master degree and Ph.D.). The educa�onal programs of PNGE in each level consists of theore�cal courses and research projects as is usually done by other state universi�es in Iran. Sahand Oil and Gas Research Ins�tute in addi�on to several other research laboratories equipped with appropriated instruments among the others are the research facili�es at PNGE to execute research programs and to provide excep�onal learning services to researchers and students. Faculty members include 1 Professor, 2 Associate professors and 5 Assistant professors in different branches of petroleum engineering. 10 Ph.D. students and More than 30 M.Sc. Students are studying in this Faculty


Petroleum Engineering

Sta�cs and Material StrengthMass transferHeat TransferReservoir Rock Proper�es LaboratoryReservoir Fluid Proper�es LaboratoryIntroduc�on to Petroleum EngineeringSta�s�cal analysis of reservoir data

Thermodynamic IThermodynamic IIGraduca�on Project Op�miza�onFluid Properties of the ReservoirSpecialized Oil LanguageGeosta�s�cal Spa�al Modeing of Reservoir Structural GeologyGeneral GeologyPetroleum Geology

PetrologyDrilling FluidsGeneral Chemistry IGeneral chemistry IIPhysical ChemistryProduc�on opera�ons Internship AInternship BApplied mathema�cs for petroleum engineering

Basics of Well tes�ngFundamentals of drilling engineeringEnergy and Mass BalanceEnergy and Mass BalanceIntroduc�on to Produc�on EngineeringReservoir Engineering IReservoir Engineering IIWell logging

MSc program PhD programReservoir Engineering

Produc�on Engineering Drilling Engineering Petroleum Explora�on

Petroleum Engineering Petroleum Engineering-Explora�on


Dis�nc�onShanghai Ranking 2019 (the Academic Ranking of World Universi�es) 500 top Universi�es in Energy Engineering


Research facili�es

Dynamic Behavior of Materials (DBM)Cogenera�on Cooling, Heat and Power (CCHP)Advanced Heat Transfers (AHT)Mechatronics & Vibra�ons (M&V)

Steam injec�on set-up (reservoir condi�on)Core flooding set-up (reservoir condi�on)PVT cell (reservoir condi�on)Densitometer (reservoir condi�on)Viscometer (reservoir condi�on)Recombina�on cellCore holderAsphaltene precipita�on set-up(reservoir condi�on)Atmospheric ViscometerPour point and cloud point apparatusResistometerHPLC pumpGC mass, GC, TG analyzer, TOC & TNanalyzer, CHN analyzerXRD and XRF


Sahand Oil and Gas Research Ins�tute (SOGRI)SOGRI is a center of high quality research, innova�on, and building high T & P equip-ments. SOGRI started its ac�vity since 2003. Development of cost-effec�ve and environmentally methods to increase oil and gas recovery has been considered as a primarily goal of SOGRI.

Research Ac�vi�es SOGRI consists of six research groups which are as follows: Enhanced oil and gas recovery, Reservoir simula�on, Produc�on and drilling, Reservoir characteriza�on and geophysics, Rock and soil mechan-ics, Oil and gas marine construc�ons . At present, SOGRI’s research has been concentrated on the applica�on of different enhanced oil recovery methods in Iranian reservoirs. Below is a list of research pro-jects has been done in SOGRI: Steam injec�on Water alterna�ve gas injec�on Polymer, surfactant and foam flooding Inverse emulsion for EOR Asphaltene precipita�on study Hydraulic fracturing Modeling of wellbore stability

Faculty ofE-Learning & Center of Open Training

Tabriz Campus Mellat Blvd, Tabriz 5197817169, IranTelephone number: +98 41 34249611

Fax Number: +98 41 34249614Email: [email protected]: www.vu-sahand.ir




Introduc�onFaculty of E-Learning at the Sahand University of Technology was established in 2007, in mee�ng the needs of prospec�ve students while keeping pace with the state-of-the-art developments in educa-�onal technology. This faculty offers undergraduate and graduate distance educa�on programs in Chemical Engineering, Material Engineering, Biomedical and Electrical Engineering, while follows the na�onal agenda of higher-educa�on standards. Moreover, the Center of Open Training, as one of the important educa�onal units of the Faculty of E-Learning, holds various short-term educa�onal and scien�fic open courses as well as conduc�ng workshops and seminars with the aim of crea�ng scien�fic and technical skills for students, researchers, experts, engineers, employees and managers of the governmental and private organiza�ons.

Program MSc program

Biomedical Engineering

Electrical Engineering - Communica�ons

Chemical Engineering

Biomedical Engineering -Bioelectric

Metallurgy & Materials Engineering

Chemical Engineering - Process Design

Materials Engineering -Characteriza�on and selec�on of metallic materials

Central Library



Introduc�on

Strategic plan, mission and goals

Important sec�ons

Library Resources at a glance

The central library of the university began its main ac�vity at the same �me as the university was founded in 1989. The central library of the university is established to meet the educa�onal, research, research and cultural needs of professors, students and staff, and is responsible for collect-ing and organizing a collec�on of books, magazines, ar�cles, research reports, audiovisual materials, databases, electronic resources and other resources needed by research and training groups. Currently there are more than 5100 members with direct and distance access to the facili�es and resources.It also has two satellite libraries namely the Library of the Technical College of Varzaqan and the Library of Islamic Sciences and Holy Defense.

Academic libraries, as the heart of the university, carry out research-related tasks directly and teaching-related tasks indirectly to fulfill the needs of faculty members and students. The research tasks of the academic libraries include supplying, organizing and supervising, providing access to informa�on and public services. Guidelines have been documneted for each of the above tasks.The core mission of the library is to keep pace with the progress of university to obtain a favorable status for the library and to make it one of the most efficient academic libraries by providing a collec�on of the most authorita�ve and up-to-date scien�fic resources and using the latest state-of-the-art technologies. Being in the northwest of the country, the main vision of the Central Library is to reach a posi�on where it can respond to any informa�on needs of its user community.

A-Supply and Collec�on of Resources. B-Lis�ng and classifica�on. C-The periodicals sec�on. D-The loan sec�on.

E-Informa�on and audiovisual services.F-Reference sec�on and theses. G-Document supply division.H-Management part

.

.

Document Number

Persian books 51398

English books 20657

E-Books 62000

Persian journals 148

Foreign journals 368

Registered On-line Journals 110

Theses 3849

Resources Online 34

Audiovisual films

Scientific CD and DVD

360

5200

Interna�onal Affairs

Sahand University of Technology, Tabriz, 51335-1996, IranWebsite: www.sut.ac.ir/ias

Interna�onal Affairs DirectorTel: +98 41 33443843Fax: +98 41 33444320

Email: [email protected]; [email protected]

Interna�onal Affairs Office: Email: [email protected]; [email protected]

Tel: +98 41 33458233



The office of Interna�onal Affairs in the university operates under the direct management of SUT’s president. It was part of the General and Interna�onal Rela�ons office since the establishment of University in 1989 un�l started its independent ac�vi�es from June 2019. The mission of the Interna-�onal Affairs is to advocate and support the University’s goal in interna�onal scien�fic coopera�on. The main tasks include promo�ng interna�onal academic collabora�on, communica�ng with partner ins�tu�ons, building the mechanism for dual degree and exchange student programs, and recrui�ng interna�onal students. Being a leading technical university in the country, and aligned with the global development of science and technology, the academics and researchers of SUT have built-up numerous number of interna�onal collabora�on and exchange programs with foreign accredited universi�es and reputed academics. In the past three years (2017-2019), SUT has endeavoured more than 40 joint research projects with European, North American, South-east Asian and Middle-Eastern universi�es across many disciplines and would be willing to expand these ac�vi�es par�cularly with neighbour leading universi�es on interna�onalisa�on, including organising dual-degree educa�on programs, exchange student and interna�onal internship programmes, joint research projects and hos�ng interna�onal scholars. SUT is very keen to work in partnership with Engineering and Science Facul�es across the world for student mobility for studies and research, student mobility for traineeship, and staff mobility for teaching and research.At our ins�tu�on, Office of Interna�onal Affairs coordinates visa, accommoda�on, residence permis-sion, and insurance processes with relevant sectors in the University including Vice-president offices in educa�on, research, student, and culture.

SAHAND UNIVERSITY OF TECHNOLOGY

Documents

SAHAND UNIVERSITY OF TECHNOLOGY Tabriz-IRAN