Always strong...

CUPRO B2®

CUPRO CB®

CUPRO CNB®

Mech. & Physical Properties

Yield st.Tensile st.HardnessConductivityGravityTherm. Conduc.

: 1000 Mpa: 1200 Mpa: 360-420 HB: % 22

3: 8.3 g/cm: 120 W/mK

Yield st.Tensile st.HardnessConductivityGravityTherm. Conduc.

: 490-550 Mpa: 700-900 Mpa: min. 210 HB: min. 25 MS/m

3: 8.8 g/cm: 240 W/mK

Yield st.Tensile st.HardnessConductivityGravityTherm. Conduc.

: 640-830 Mpa: 670-890 Mpa: 220-260 HB: 25 MS/m

3: 8.8 g/cm: 209 W/mK

PRODUCTS APPLICATIONS

HARD COPPER

Mech. & Physical Properties

Mech. & Physical Properties

Safety tools, Bottom colling plate and inserts f plastic moulds ,Seam welding discsor

Cooling part of blow moulds (PET), Mesh and spot welding electrodes, Metal casting dies

Pistons for aluminium injection machines, Seam welding discs, Mesh welding electrodes, Metal casting dies (e.g Brass)

Beryllium Copper (%2)

Beryllium Copper (with Co)

Beryllium Copper(with Co and Ni)

CUPRO NSS(Patented by SM)

®

CuNi2SiCr+

CUPROMAX®

CuCr1Zr

Mech. & Physical Properties

Yield st.Tensile st.HardnessConductivityGravityTherm. conduc.Therm. expans.

: 490-550 Mpa: 700-900 Mpa: 200-240 HB: % 52

3: 8.75 g/cm: 220 W/mK: 17.0 1/K

Yield st.Tensile st.HardnessConductivityGravityTherm. Conduc.

: 300-320 Mpa: 370-400 Mpa: 120-160 HB: %86

3: 8.9 g/cm: 320 W/mK

ALLOYS OF SAGLAM

PRODUCTS APPLICATIONS

Mech. & Physical Properties

Inserts for plastic moulds, Metal Casting dies, Pistons for aluminium injection machines, Electrode holders on spot welding machines

Seam welding discs, Spot welding electrodes, Electrical discharge machining (EDM), Electrical connections (plate), Moulds for aluminium and steel continious casting

Nickel + Silicon+ Additions Copper

Chromium + ZirconiumCopper

Spot Welding Electrodes and Holders

ALUMINIUM BRONZES OF SAGLAM

PRODUCTS APPLICATIONS

CUPRAL 2®

CUPRAL 4M®

CUPRAL 8&

®CUPRAL 10

®

Mech. & Physical Properties

Yield st.Tensile st.HardnessConductivityGravityTherm. conduc.

: 350-380 Mpa: 650-750 Mpa: 190-220 HB: % 12

3: 7.2-7.5 g/cm: 64 W/mK

Yield st.Tensile st.HardnessConductivityGravityTherm. Conduc.

: 700-800 Mpa: 850-950 Mpa: 270-290 HB: % 8.2

3: 7.5 g/cm: 42 W/mK

Yield st.Tensile st.HardnessConductivityGravityTherm. conduc.

: 400-600 Mpa: 400-700 Mpa: 350-450 HB: -

3: 7.2 g/cm: 50 W/mK

Gears, Guides, Bearings, Bushings

Deep drawing dies (cooker-sink), bearings, bushings

machine parts require wich wear resistance

Address: Metal İş San. Sit. 4.Bl. 42-44 İkitelli / İSTANBUL Phone:+90 (212) 671 23 31 Pbx, Fax:+90 (212) 549 59 75

Leader Brand in Deep Drawing Dies

Mech. & Physical Properties

Mech. & Physical Properties

Tube wiper dies, Tube mandrels & rolls, Bronze gears and bearings, Machine parts which require wear resistance

CuAl10Fe3

CuAl10Ni5Fe4