T H E M A G I D G L O V E & S A F E T Y M A N U F A C T U R I N G S A F E T Y R E P O R T

®

M A T T E R SNo Safety Issue is Too Hot to Handle for Magid & Amphenol Corporation When Amphenol Corporation, a manufacturer

of electrical connectors for the aerospace and commercial markets, needed a custom-made cover mitt for the workers in the die cast department, they turned to the trusted experts at Magid Glove & Safety for help.

Amphenol’s die cast department handles hot parts and hot molding dyes all day every day. “They need superior hand protection to do this without injuring themselves,” says Vickie Hills, buyer at Amphenol Corporation.

The company was using a cover mitt from another supplier which workers wore over the die cast gloves for a layer of extra protection when handling hot molds. Amphenol’s safety department was happy with the overall quality of the cover mitts it was using, but felt that a minor modification of the mitts—to make them longer—would help the company avoid a few more minor injuries. Hills put in the request with the (non-Magid) supplier to make the modification. When the modified mitts arrived the supplier had also decreased the width of the mitts, which meant the operators could no longer fit the mitts over their gloves. Amphenol requested that its supplier make further modifications; unfortunately, this process dragged on for months, without success.

Hills worked with Magid in the past and knew of its reputation for custom-made personal protective equipment (PPE); Hills decided it was time to call Magid. Hills provided a sample of an incorrect mitt with instructions on what to change. It only took two trials before Magid came up with the exact mitt the company needed—the Magid KVHP11. The company uses approximately 155 mitts per month, as they are intrinsic to the safety and well-being of Amphenol’s die cast department.

“The die cast operators are very pleased with the cover mitt Magid created,” says Hills. “The newly configured mitt extends the service life for the glove that is worn inside of it, providing a significant cost savings for our plant.”

Purchasing the KVHP11 from Magid has resulted in a 39% savings over the previous supplier.

While Amphenol Corporation has monthly meetings to address safety issues and create working solutions, the cover mitt was a safety issue which was solved by a coordinated effort between Amphenol purchasing, Amphenol production and Magid Glove & Safety.

“We were able to give Magid specifications for a cover mitt and they produced it for us quickly. In most issues around the safety of our workers, speed is of the essence,” says Hills. “It is important to be able to have a safety partner like Magid to tackle safety issues that we cannot address alone. I appreciate the availability of my rep to work on and devise solutions to issues that arise with our PPE.”

Photo courtesy of A

mphenol C

orporation

The cover mitt (KVHP11) created by Magid provides extra protection for Amphenol employees.

“It is important to be able to have a safety partner like Magid to tackle safety issues that we cannot address alone.”

—Vickie Hills, Amphenol Corporation

Volume 18, Issue 1

2

Finding the Ideal Fit is a Priority at Austal USAFor some employees at Austal USA,

a global defense prime contractor, perfect fitting personal protective equipment (PPE) wasn’t always easy to find. Austal has several employees with hand deformities that traditional gloves and PPE do not accommodate. It is important that Austal, a company that designs, constructs and maintains revolutionary platforms for the United States Navy, produce quality work on time. It is difficult to accomplish this goal if employees must deal with ill-fitting PPE. To address this issue, Chris Blankenfeld, health, safety and environmental manager at Austal, turned to Magid.

“We have several employees in our shipyard of 3,000 that have some type of hand deformity caused by birth defects, military injury or industry

injury,” says Blankenfeld. “Our Magid rep overheard one of these employees talking to me and immediately offered to work with us to find a solution.”

Austal’s rep informed Blankenfeld that Magid can make special gloves specific to the needs of each employee with a hand deformity. Blankenfeld jumped on this offer without hesitation. Each employee with a special need was fitted for a glove and within a short period of time, each received a modified glove—specific to them. Austal employees were ecstatic with the new products and expressed great satisfaction.

David Lomotan, welder A-class at Austal, lost his middle and ring finger seven years ago in an accident with a table saw. Adapting to everyday tasks has been complicated for him.

When it comes to his job, simple jobs like tightening bolts or performing maintenance on his welder, he has had to make several adjustments to his PPE to accommodate for his missing fingers. Magid created a custom glove that increased Lomotan’s comfort and safety.

“It is difficult sometimes but I have managed to adapt and overcome obstacles,” Lomotan explains. “The special gloves that Magid made for me are excellent. The two fingers I am missing cause slack in normal gloves, which is dangerous because there is no control over the slack. There is often danger that they can get caught in power tools and other equipment. My production along with my safety has increased tremendously. I am very thankful that Magid and Austal were so willing to accommodate my needs. It really has made things easier.”

David Lomotan, an Austal employee, shows off his custom-made glove by Magid.

3

Magid and Austal worked with all of the employees who required modified gloves increasing morale as well as safety.

“I think the special gloves have assured these workers that their company is looking out for them,” added Blankenfeld.

“With safety equipment that fits properly, workers are much more efficient. As a result of these new modified gloves, production for these employees has gone up and injuries have gone down.”

Not only was Magid willing to work with the specific needs of each employee, they maintained their dedication to affordability. In turn, Blankenfeld was able to provide his employees with the safety equipment needed to improve productivity and safety while keeping costs low.

“There was never an instance where I was told by our representative that Magid could not provide what I wanted when I needed it,” Blankenfeld says. “This is just one amazing example that not only improved safety, but also made our workers feel even more valued and appreciated.”

At Austal USA, all employees have the opportunity to voice their opinion on what direction Austal should take to improve safety processes. Not only did employees drive the need for special gloves for workers with hand deformities, but their ability to highlight the needs of all workers also drove the need for an improved welding glove.

“The glove we had been using did not offer as much dexterity or cut protection as we would have liked,” explains Blankenfeld. “With the help of

the employees at Austal and the Magid team, I was able to test several varieties of welding gloves to find the best one to meet all our needs. After some experimenting to specifically address our needs with variants of our current gloves, the Austal/Magid team designed the (R1292AXW) welding glove.”

With its high level of dexterity, this glove can be used equally well by both the MIG (Metal Inert Gas) and TIG (Tungsten Inert Gas) welders at Austal. It also has a level of cut resistance that is not found in other welding gloves in the marketplace. This glove by itself replaced four other gloves which were in use at Austal, which resulted in a significant cost savings. Most importantly, Austal has experienced a 40% reduction in hand injuries since using this Magid glove.

“I realize our Magid rep has many other clients,” states Blankenfeld, “but he has never let me down in a pinch. Whether it is designing custom gloves for specific employee needs or coming up with an entirely new glove to meet the needs of Austal, Magid has been an incredible partner.”

“There has never been an instance where I have been told by our rep that Magid could not provide what I wanted when I needed it.”

—Chris Blankenfeld, Austal USA

Austal Awards • Awarded Excellence in Safety Awards from the Shipbuilding Council of America four years running (2009-2012)

• Awarded Best Large Shipyard Award from the American Longshore Mutual Association three times (2009, 2010, 2012)

• Austal Safety & Environmental are active members of both the Shipbuilders Council of America (SCA) and National Shipbuilding Repair Program (NSRP) sitting on both the environmental and safety committees.

The Secret to Safety SuccessSafety Matters asked Chris Blankenfeld of Austal USA to share the secret of its safety success:

To ensure the safety of our employees Austal USA will…

• Assess the potential safety and health risks of our activities and integrate these considerations into our planning, decisions and processes, ensuring that the way in which we conduct our business does not put at risk the safety and health of any person.

• Strive for continuous improvement in our safety and health performance through the development of objectives and targets, monitoring and regular review of that performance.

• Establish accountability for all employees, contractors and visitors for their safety and health performance.

• Promote initiatives to continuously reduce the safety and health risks associated with all business activities and appropriately recognize this contribution.

• Advise, train and ensure competence of our employees and contractors as necessary to meet our safety and health requirements.

Photo courtesy of Austal USA

4

GHS Pictograms & Hazard Classes

Effective Completion Date Requirements Who

December 1, 2013 Train employees on the new label elements and safety data sheet (SDS) format. Employers

June 1, 2015*

December 1, 2015

Compliance with all modified provisions of this final rule, except:

The distributor shall not ship containers labeled by the chemical manufacturer or importer unless it is a GHS label

Chemical manufacturers, importers, distributors and employers

June 1, 2016Update alternative workplace labeling and hazard communication program as necessary and provide additional employee training for newly identified physical or health hazards

Employers

Transition period to the effective completion dates noted above

May comply with either 29 CFR 1910.1200 (the final standard) or the current standard or both

Chemical manufacturers, importers, distributors and employers

GHS Standard Adopted by OSHAOSHA is enforcing a new Globally Harmonized System

(GHS) of Classification and Labeling of Chemicals. The system standardizes the way hazardous materials are classified and harmonizes the way hazards are communicated by means of Warning Labels and Safety Data Sheets. OSHA updated the Hazard Communication Standard (HCS) 1910.1200 for consistency with the provisions of the GHS effective May 25, 2012.

Four major changes to the OSHA Hazard Communication Standard (HCS):

1 Hazardclassification:Provides specific criteria for classification of health and physical hazards, as well as classification of mixtures.

2 Labels: Chemical manufacturers and importers are required to provide a label that includes a harmonized signal word, pictogram and hazard statement for each hazard class and category. Precautionary statements must also be provided.

3 Safetydatasheets: Will now have a specified 16-section format.

4 Informationandtraining:Employers are required to train workers by December 1, 2013 on the new format of labels, elements and safety data sheets to facilitate recognition and understanding.

Who will be affected by GHS?

• Manufacturers, suppliers and users of chemicals

• GHS is applied to:

• Workplace chemicals

• Consumer chemicals

• Pest control products

• Products regulated under the transportation of dangerous goods

For more information, visit www.osha.gov/dsg/hazcom/index.html or speak to your Magid rep.

Timeline

IrritantDermal SensitizerAcute Toxicity (Harmful)Narcotic EffectsRespiratory TractIrritation

ExplosivesSelf ReactivesOrganic Peroxides

Gasses Under Pressure

Oxidizers

Acute Toxicity (Severe)

CarcinogenRespiratory SensitizerReproductive ToxicityTarget Organ ToxicityMutagencityAspiration Toxicity

FlammablesSelf ReactivesPyrophoricsSelf-HeatingEmits Flammable GasOrganic Peroxides

Corrosives

Environmental Toxicity

* This data coincides with the European Union implementation date for classification mixtures.

5

Magid® Gemstone® Myst Y106 Colored-Temple SeriesThe Gemstone® Myst Y106 Colored-Temple Series expands the popular line of stellar eye protection with three more new styles featuring purple, navy blue and red colored-temple options! These bright colors stand out and increase employee compliance. Painted temples are more vibrant and colorful than injection molded temples and the wraparound frame is lightweight and comfortable for workers. Offering the same protective qualities as the existing colored-temple safety glasses, these new styles complement the current hi-viz orange, hi-viz green, hi-viz pink, tortoise shell and black/grey camouflage color offering while providing customers with additional cost-savings opportunities. The hard-coated polycarbonate lens meets ANSI Z87.1-2010 High Impact Safety Standards and blocks 99.9% of harmful ultraviolet light.

Magid announces the launch of two new Magid® Precision Safety® N95 Disposable Respirators with premium featuresThe Precision Safety IR1950N95 and IR2FRN95 Disposable Respirators are NIOSH-95 42CFR84 approved and incorporate many comfort-

enhancing features, including a high-efficiency exhalation valve that helps keep the wearer’s face cool and dry in hot and dusty environments. Both masks filter at least 95% of solid and non-oil liquid airborne particulates 0.3 microns and larger. With a high-efficiency exhalation valve, an adjustable aluminum nosepiece with a foam PVC seal at the nose, yellow double-strap headbands and ultra sonic strap seals, the masks provide optimal fit and comfort. Lightweight constructions deliver all-day comfort for workers. If you’re looking for an N95 mask for welding applications, look no further than the new Precision Safety IR2FRN95 Disposable Respirator. The IR2FRN95 is Magid’s first flame-resistant disposable respirator and offers significant cost savings compared with other welding masks on the market. The IR2FRN95 is the perfect choice for use in welding and sodering, as as well as other applications where light flame and spark are at risk.

IR2FRN95

Magid® ROC® GP100 Coated Work GlovesIntroducing Magid® ROC®

GP100 Coated Work Gloves, the newest innovation in

general purpose gloves. The ROC GP100 Gloves raise the

bar for comfort, grip and dexterity thanks to its innovative black

micro-foam nitrile coating. This micro-foam coating is softer and more flexible than standard nitrile, providing superb dexterity and

tactile sensitivity while maintaining the benefits of oil and water resistance. These gloves feature grey, high density nylon and spandex blended shell that is cool, comfortable and breathable. Their silicone-free, low-lint construction minimizes product contamination. The work gloves can be laundered for repeated use and their dark color hides dirt and grime, further extending the life of the glove. The rubber band edge reduces fraying. ANSI Cut Level 1 Cut Resistance and ANSI Level 4 Abrasion Resistance ratings make these gloves ideal for use in assembly, shipping and receiving, material handling and general maintenance applications. Available in sizes 6-12, the ROC GP100 is a glove employees are sure to love.

IR1950N95

6

Ultra-Lok™ Self- Retracting Lifeline by DBI-SALA®

Ultra-Lok™ Self-Retracting Lifelines combine durable materials with solid construction for the ultimate in dependable

fall protection. The 3504433 lifeline comes with a durable

thermoplastic housing, 20 feet of 3/16” wire rope lifeline and aluminum

side plates for maximum durability and minimum weight. For added security, Ultra-Lok™ systems have an anti-ratcheting twin disc brake system with an audio indicator to let you know it

is functioning properly.

Medique® Medi-Phenyl® Nasal Decongestant TabletsMedique Medi-Phenyl nasal decongestant tablets break up nasal congestion to temporarily relieve colds, flu, hay fever and symptoms of other respiratory allergies associated with sinusitis. The film-coated tablets are easy to swallow, and come in convenient unit dose packs. The active ingredient is phenylephrine HCL (5mg).

Winners: ISHN 2013 Readers’ Choice AwardsRecognized as some of today’s most innovative

PPE equipment and safety products

TOUROCHand Protection – General Purpose Category

TRX500Hand Protection – High-Vis Category

CT500Hand Protection – Cut Protection Category

Magid® CutMaster® Machine Knit 14” to 24”Sleeves, Made with Dupont® Kevlar® 1500Magid CutMaster Machine Knit 100% Kevlar Protective Sleeves offer exceptional cut, puncture, abrasion, heat and flame resistance. Pound for pound, Kevlar is five times stronger than steel, powering these double-layered sleeves to an ANSI Cut Level 4 cut protection rating based on US ANSI

ASTM F-1790-97 Testing Standards. Thumb and bar tacked finger slots on these sleeves provide additional protection for the hand while ensuring the sleeve stays in place.

7

Brady®/SPC Oil Plus™ Heavy Sorbent RollBrady’s SPC absorbents and spill containment products help you keep your employees and work environment safe from unexpected spills, leaks, drips or other accidents. The Oil Plus™ Heavy Roll absorbs petroleum-based oils, solvents and other non-water soluble liquids. Its 3-ply, white, dimpled and perfed construction reduces waste and allows you to use only what you need. The full sized, heavy weight roll is perfed every 15” and up the center for maximum absorption.

North® by Honeywell 845 Emergency Escape Breathing ApparatusThe North by Honeywell 845 Emergency Escape Breathing Apparatus provides an average of 42 lpm of airflow for five minutes, giving workers much-needed peace of mind in dangerous situations. The 845 features a transparent hood with an elastic closure, made of durable polyurethane for superior visibility, and to minimize fogging, a deflector blows incoming air onto the lens.

After use, the hood can be detached for replacement or cleaning, and the cylinder is lightweight and refillable.

Moldex® SparkPlugs® PlugStation 6645 Ear Plug DispensersThe Moldex SparkPlugs M6644 has the highest independently tested NRR available. Their random fun-colors are a great way to put some spark in your hearing protection program. SparkPlugs feature extra-soft, extra-light foam with a tapered design seal that performs without pressure, and a smooth outer surface that doesn’t irritate the ear canal.

MechanixWear® Safety Original SMG-91 Mechanic’s Gloves You can’t beat the Safety Original® Glove for performance, comfort and safety in industrial environments. MechanixWear has customized their signature Original® Glove with high-visibility Day-Glow two-way stretch Spandex, and a bright, Day-Glow, Color-Fast synthetic leather palm. There is also a Mechanix Scatter graphic pattern printed with 3M® Scotchlite™ reflective ink to add a visual effect when illuminated.

8

MSA Advantage 420 Twin-Port Half Mask RespiratorThe MSA Advantage 420 Half-Mask Respirator is designed for comfort, fit,

safety and reduced cost of ownership. The Advantage features a Patent-pending UniBond over-molded one-piece silicone facepiece. This smart design helps to eliminate possible leak paths which may be present in other competitive silicone half-mask respirators.

The MSA Advantage Respirator is intended for use with all plastic MSA Advantage cartridges as well as metal MSA Comfo threaded cartridges.

Wells Lamont® Whizard® Wire Heavy Duty Slipguard GlovesWells Lamont Whizard Heavy Duty Slipguard Gloves offer superior cut protection and slip resistance. These heavy duty gloves are constructed with a combination of high performance fibers and stainless steel, making them incredibly durable and giving them excellent thermal properties. The polyurethane, patterned grip makes these gloves ideal for the pulp and paper industry and plastic trimming.

The information contained in Safety Matters is based solely on opinion and/or recommendations of Magid Glove & Safety Manufacturing Company LLC and is not intended to represent and/or warrant compliance with official OSHA requirements. For complete OSHA Federal regulations, the Code of Federal Regulations; and specifically Title 29 C. F. R. Section 1910 for “general industry” and Section 1926 for “construction” are available for sale by the U.S. Government Printing Office, Superintendent of Documents, Mail Stop: SSOP, Washington, DC 20402-4328.

© 2013 Magid Glove & Safety Mfg. Co. LLC. Safety Matters® is a registered trademark of Magid Glove & Safety Mfg. Co. LLC. This newsletter is printed on recycled paper.

Trial samples of all new items can be ordered through your sales rep

or by calling 1-800-444-8030.

Dupont™ ProShield® Basic PB120SWH CoverallsConstructed with a soft fabric

and excellent breathability, ProShield coveralls from DuPont help protect against non-hazardous particles and light liquid splash. ProShield® coveralls utilize a proprietary comfort fit design and soft fabric to provide roomy, all-day comfort. ProShield coveralls are suitable for use in general maintenance, hospitals, and other industries.

T-REX are the most comfortable impact gloves on the planet. Form-fitting knit shells. Flexible TPR pads. Ferocious gripping power. Finally, all-day comfort meets total impact protection.

™

T-REX is available in standard (TRX500) and ANSI cut level 5 (TRX550)

Impact protection never

felt this good.

Call 800.444.8030 or visitwww.magidglove.com/Magid-T-REX-Impact-Work-Gloves.aspx

©M

agid

Glo

ve &

Saf

ety

Mfg

. Co.

LLC

.

180º impact protection • Ultra comfortable • Unrivaled dexterityRock-solid grip • High-visibility construction