Safety & Health in the“Office” Work Environment

CLEET

Safety Training

Office Employees are part of the site Safety & Health

process.

What are some of the hazards we encounter in offices? Ergonomic issues; Fire & evacuation; Electrical cords &

equipment; Heat-generating

sources; Hand & powered

tools & equipment;

Office machines (copiers, paper cutters, shredders, jammed machines);

Office chemicals; Slips, trips, falls; Housekeeping; Furniture/layout; Motor vehicle

accidents.

Start your day off safely…Dress for success Wear loose, comfortable

clothing to allow free movement of hips & to maintain natural spinal curves.

Avoid open-toed shoes and sandals, whenever possible.

Wear comfortable footwear with a low heel to reduce leg and back strain & to help prevent slips and falls.

Slips, Trips & Falls

The #1 cause of office employee injuries! – Level surfaces,– Elevated surfaces -

standing on chairs, falling out of chairs, falling down stairs

– Manufacturing areas,– Parking lots.

Awareness. Keep aisles clear. “Walk like a duck” on

slippery surfaces.

Use the handrail on stairs.

Report deficient conditions to Facilities Maintenance.

Hold onto chair seats/arms when attempting to sit.

Approved step stools & ladders only.

“Sensible shoes.” Wipe up spills. Walk, don’t run.

Layout:

Office areas established with the assistance & approval of the Facilities Maintenance & EHS.

Emergency exits & passageways established & must be maintained.

Furniture & equipment arranged, so far as possible, to:• Avoid chairs and equipment jutting into

walkways; Avoid drawers from opening into walkways or doorways; Obstruct the view around corners or partitions.

Lighting:

Areas that are not lit adequately, or are lit too much, can cause headache, strain, and fatigue.

Color plays a big role in eye fatigue. Use adjustable task lighting for tasks

that require greater illumination. Take visual “breaks” every 30 minutes. Get regular eye exams…let your eye doc

know if you are working at a computer!

“Housekeeping”

Storage or placement of objects in aisles, below knee level, or on other “office-type” floor surfaces.

Overflowing, heavy wastebaskets. Dust accumulations. Maintaining condition of office equipment

and work area. Orderly arrangement in all areas,

especially storage. Storage must be 18” or more below

sprinkler heads.

Chairs should remain squarely on the floor. Casters on all chairs should be secured

and all parts of the chair should be sturdy & should not present a hazard to the user.

Close drawers when not in use. Open drawers slowly and carefully. Avoid overloading filing cabinets, and

distribute the weight of materials stored in cabinet to avoid tipping.

Furniture should be selected and maintained without sharp edges, points, or burrs.

Furniture Safety:

Good workstation set-up is based on individual needs.

But, there are some general principles that can be taken into

account…Rule #1: If you are

uncomfortable, seek assistance!

Considerations in setting up a Computer Work Station

How with the computer be used? How long?

What kind of computer?

What furniture will be used?

What chair will be used?

What can you see?

Posture! Where will the

computer be used?

Breaks Ergo. Gizmos

“Turtleneck”; Hungry head; Slumped posture; Elbows out; Reach out of

“easy reach” zone;

Work outside the “comfort zone”;

Shoulder(s) too high/low;

Butts up; Twisting of neck

or back; Wrists outside

of neutral position;

Squinted eyes.

Good posture is essential to your health & safety!

3 natural curves. Seated posture puts

lots of strain on your body!

Exaggerated curves are bad.

Stretch frequently. Maintain or build

strength.

Easy Reach

Items to think about moving into the “easy reach” zone...– Keyboard– Mouse– Telephone– Calculator

Chairs: Some adjustments to

check out…– Seat height, depth,

angle/tilt, – Back height,

adjustability, and angle/tilt,

– Lumbar support,– Arm rest height, – Swivel.

Another pair of eyes.

Your Health & Safety Requires Stretching/Exercise “Breaks”! Two types:

– Aerobic exercise– Micro breaks

Micro Breaks: short breaks to relax, restore, re-nourish, gently stretch.

Material Handling: No lifting over 35

pounds on an occasional basis. – Obtain assistance

through the Facilities Maintenance Dept.

Avoid lifting objects that are too heavy for you!

Plan the lift. Stand with your feet

apart, alongside the object to be lifted.

Use the “sit down” position, maintaining the natural arch of the spine.

Tuck your chin. Get a good grip on the

object. Keep the object close. Center the weight over

your feet. Avoid twisting.

Office Equipment Safeguarding Copiers (sorting

trays, moving parts). Paper Cutter

guarding to avoid contact with the cutting blade by the opposing hand (hand holding the paper).

When cutters are not in use, cutter should be down and the blade secured.

Storage of letter openers and sharp tools (i.e. Exacto knives, scissors, etc.) should be appropriate to avoid tools rolling and falling off of desk surfaces.

Use sheaths for knives and razors.

11% of Injuries =“Struck by or between”

Struck by or between what???– Doors,– Office machines & equipment

dropped on feet;– Falling objects (from cabinets &

storage locations);– Copy machines;– “Addressing” machines and fans;– Paper cutters.

In accordance with Lockout/Tagout policy & procedures... Office equipment has

the potential to cause harm & is included in the Lockout/ Tagout program.

In order to clear a jam of electrically-powered office equipment, power must be turned “off” and disconnected from the power supply.

Copiers that become jammed should be cleared in accordance with manufacturer’s instructions. – Know the procedures

for for safely clearing jams.

– Remain cognizant of areas which may be hot.

– Remember that power is still connected!

Electrical Safety:

Shut off electrical equipment not in use!

Properly equipped with grounding prongs.

Electrical cords should be visually inspected on a periodic basis to identify frayed and worn cords.

Maintain electrical cords in areas out of walkways and passageways.

Avoid extension cords in office areas.

Surge protectors may not be overloaded and may not be used as an “extension cord” for other office equipment.

Don’t overload outlets and surge protectors!

Combustible material, such as paper, may not be stored on or in close proximity to electrical outlets and connections.

Heat Generating Equipment

Coffee potToaster ovenMicrowaveMug warmerHeatersCooling fansSoldering ironHeat gunOther electrical stuff

Ensure 18” or more of clearance from other combustibles

UL listed Grounding prongs Plug into outlet directly Heaters need tip-over

protection Shut it off!

Chemical Safety

What chemicals do we use in the office?

Read the label & hazard warnings. Read the MSDS (Material Safety

Data Sheet)…on file in EHS Dept. Handle & store the material

properly, in accordance with the MSDS.

Report injuries & “near-hits”

Learn from near-misses to prevent serious injuries.

Report injuries to your supervisor and the EHS Manager.

Primary Goal: Prevent Recurrence!

Emergencies:

How do we report emergencies & get assistance?

What does the alarm sound like? What are the primary &

secondary exits? Where do we meet? Who accounts for us? How do we report missing

persons?

General Office Safety Hazard Control

Proper, well-designed layout of office, furniture, equipment, lighting;

Ergonomic evaluation & correction of workstations;

Small appliance control ; Proper electrical wiring & properly

grounded electrical service;

General Hazard Control - continued

Proper materials handling & storage areas;

Maintenance of walking surfaces; Emergency planning; Maintenance of fire prevention &

control program; Contractor & visitor safety rules.

THE END