SAF 30-5 - Construction Adhesives | Bostik · The SAF 30-15 adhesive is available in 50mL and 490mL side by side cartridges, 20L pails or 200L drums. SAF 30-15 50mL cartridges require

KEY FEATURES

- Very fast curing time

- Non-sag, application on vertical surfaces

- Temperature resistance even under stress

- Excellent environmental resistance

- Permanent toughness even after ageing

- Low surface preparation

DESCRIPTION The SAF range is made of patented methacrylate adhesives and

shows unmatched performance in term of resistance and flexibility.

These adhesives have been designed for bonding a wide range of

dissimilar substrates including metals and plastics as well as

composite materials for industrial applications. The outstanding

properties of the SAF range allow structural bonding while keeping

flexibility and fatigue resistance.

The SAF range products have been developed to resist the most

aggressive environments and extreme temperatures. It shows

unprecedented results facing weathering and ageing.

RANGE OF APPLICATION

The SAF 30-5 is recommended for the followed substrates:

Steel DCPD PVC

Stainless Steel Elium PS

Aluminium Vinyester ABS

Powder coated Steel Epoxy PC

Polyester PMMA Glass

PRODUCT CHARACTERISTICS


Characteristics SAF 30-5

System Two component

10:1 Volume Ratio

Polymerization Room Temperature

Operating temperature -40°C to 150°C

Elongation 30 %

ADHESIVE PROPERTIES

PHYSICAL PROPERTIES

PROPERTIES

Appearance Off White

Density 1,03

Viscosity Brookfield at 23°C [mPa.s]

A: 100000-2000001

B: 40000-800002

Type Non-sag

CURING PROPERTIES

PROPERTIES SAF 30-5

Open time [min] 2-3

Fixture time @24°C [min] 5-8

Full Cure [hours] 24

MECHANICAL PROPERTIES

PROPERTIES SAF 30-5

Lap Shear strength [MPa]4 21.0 CF

Tensile Strength at break3

[Mpa] 12-16

Tensile Modulus [Mpa]

250-400

Hardness [Shore D] 70 - 80

% elongation at break3 30

SAF 30-5 TWO COMPONENT METHACRYLATE

CO

LFLE

X LG

59A

TEC

HN

ICA

L D

ATA

SH

EET,

AP

RIL

201

4

Bostik S.A. 253, avenue du Président Wilson, 93211 La Plaine Saint-Denis cedex Phone : +33 (0)1 55 99 90 00 Fax : +33 (0)1 55 99 90 01 www.bostik.com

WEATHERING AND AGEING RESISTANCE

LAP SHEAR STRENGTH (Mpa) 4

Substrates Before ageing cycles After ageing cycles

Aluminium 6060

21.0 CF5 22.0 CF

Aluminium 6061 21.0 CF 22.0 CF

Aluminium 1050A

18 CF -

Stainless steel 21.0 CF 21.8 CF

Steel 22.0 CF 23.0 CF

PMMA Substrate failure Substrate failure

ABS Substrate failure Substrate failure

FRP Delamination failure Delamination failure

NOTES

1. Brookfield viscosity (mPa.s) mobile T-D at 10trm

2. Brookfield viscosity (mPa.s) mobile RV7 @10trm

3. With ISO 527-IA

4. ISO 4587

5. CF: Cohesive Failure

SURFACE PREPARATION Use AEC T700 to remove grease, contamination or poorly adhering

oxides from metal surfaces. Most plastics require a simple cleaning

before bonding. Some may require sanding for better performances.

PRECAUTIONS Adhesive contains methacrylate monomers and is flammable.

Materials must be stored in cool place away from sources of heat.

During the polymerization, the chemical reaction causes a typical

smell, please use the product in a well-ventilated area.

When the adhesive two components are mixed, an exothermic

reaction can occur and generates heat. The amount of heat is

dependent on the mass and thickness of the mixed product. It can

reach a maximal temperature of 100°C.

Adhesives contain chemical materials, prevent contact with skin and

eyes. In case with skin contact, wash with soap and water. In case

of eye contact, flush with water and seek immediate medical

attention. Do not swallow and keep away from children.

Read material Safety Data Sheet before handling or using this

product.

APPLICATION The optimum qualities are obtained at room temperature, between

12°C and 35°C without post-curing.

Follow the instructions on the product operating guide or contact

your Bostik representative for any information concerning product

use, dispensing equipment or substrates application.

STORAGE

The SAF 30-5 shelf life is 9 months in unopened original packaging. The

product may be stored in a closed container in a dry place at temperature

between 15°C and 30°C.

Exposure to higher or lower temperature will result in a reduction of the

stated shelf life.

PACKAGING The SAF 30-5 adhesive is available in 50mL and 490mL side by

side cartridges, 20L pails or 200L drums.

SAF 30-5 50mL cartridges require the use of M5.4/16 mixers.

SAF 30-5 490mL cartridges require the use of MFX10-18 mixers.

For packaging information please call your Bostik sales or technical

representative.

LIMITED WARRANTY To the maximum extent allowed by law, Bostik disclaims all other

express or implied warranties, including without limitation

warranties of merchantability and fitness for a particular purpose.

Unless otherwise stated in the limited warranty, the sole remedy for

breach of warranty is replacement of the product or refund of the

buyer’s purchase price. Bostik disclaims any liability for direct,

incidental, consequential, or special damages to the maximum

extent allowed by law. Disclaimers of implied warranties may not be

applicable to certain classes of buyers and some states do not allow

the exclusion or limitation of incidental or consequential damages,

so the above limitations may not apply to you. It is the buyer’s

obligation to test the suitability of the product for an intended use

prior to using it. The Limited Warranty extends only to the original

purchaser and is not transferable or assignable. Any claim for a

defective product must be filed within 30 days of discovery of a

problem, and must be submitted with written proof of purchase.

BOSTIK HOTLINE

Smart help +33 5 57 26 15 15

AEC Polymers

6 Rue Guy Pellerin

33114 Le Barp, France www.bostik.com/aecpolymers

This document supersedes all previously published literature. 23.02.17

KEY FEATURES

- Fast curing time





- Minimal surface preparation













Steel DCPD PVC









10:1 Volume Ratio



Elongation 30 %

ADHESIVE PROPERTIES

PHYSICAL PROPERTIES

PROPERTIES


Density 1.03


A: 100000-2000001

B: 40000-800002

Type Non-sag

CURING PROPERTIES

PROPERTIES SAF 30-15

Open time [min] 7






Tensile Strength at break [Mpa]

12-16


250-400


% elongation at break 30


CO

LFLE

X LG

59A

TEC

HN

ICA

L D

ATA

SH

EET,

AP

RIL

201

4





Aluminium 6060

21.0 CF5 22.0 CF


Aluminium 1050A

18 CF -






NOTES 1. Brookfield viscosity (mPa.s) mobile T-D at 10trm


3. With ISO 527-IA

4. ISO 4587


















product.






STORAGE





stated shelf life.






representative.











so the above limitations may not apply to you. It is the buyer’s






BOSTIK HOTLINE

Smart help +33 5 57 26 15 15

AEC Polymers

6 Rue Guy Pellerin



KEY FEATURES

- Medium curing time





- Minimal surface preparation













Steel DCPD PVC









10:1 Volume Ratio



Elongation 30 %

ADHESIVE PROPERTIES

PHYSICAL PROPERTIES

PROPERTIES RESIN HARDENER


Density 1.03


A: 150000-2000001

B: 40000-800002

Type Non-sag

CURING PROPERTIES


Open time [min] 20






Tensile Strength at break [Mpa]3

12-16


250-400


% elongation at break3 30


CO

LFLE

X LG

59A

TEC

HN

ICA

L D

ATA

SH

EET,

AP

RIL

201

4





Aluminium 6060

21.0 CF5 22.0 CF


Aluminium 1050A

18 CF -






NOTES

1. Brookfield viscosity (mPa.s) mobile T-D at 10trm


3. With ISO 527-IA

4. ISO 4587


















product.






STORAGE





stated shelf life.






representative.











so the above limitations may not apply to you. it is the buyer’s






BOSTIK HOTLINE

Smart help +33 5 57 26 15 15

AEC Polymers

6 Rue Guy Pellerin



Documents

SAF 30-5 - Construction Adhesives | Bostik · The SAF 30-15 adhesive is available in 50mL and 490mL side by side cartridges, 20L pails or 200L drums. SAF 30-15 50mL cartridges require