40
S3 SUPER SLICER 3-2020 OPERATOR’S & PARTS MANUAL

S3 SUPER SLICER - DewEze · 2019-11-13 · S3 Statement of Warranty Harper Industries, Inc. (HII) warrants to each purchaser of a new DewEze S3 from an authorized dealer or representative,

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

  • S3

    S3 SUPER SLICER

    3-2020

    OPERATOR’S & PARTSMANUAL

  • S31

  • S3

    Thank you for purchasing a Deweze S3

    TO THE OWNER OR OPERATOR:

    As with all Harper products, the S3s have been thoroughly tested and built to provide a sturdy, de-pendable product. The S3 is equipped with hydraulics, which allows it to be used for a wide range of lifting and hauling tasks. This manual is written as an aid to operating and maintaining the DewEze S3. Read and understand the manual thoroughly before operation to avoid damage to the unit or injury to the operator or bystanders.

    A S3 can present hazards to an operator who follows unsafe procedures in either the operation or maintenance of the unit. Therefore, SAFETY WARNINGS are present at certain locations in the text. Harper Industries is not responsible for accidents or injuries that result from the misuse or lack of maintenance of the S3.

    SYMBOL: SAFETY WARNING!

    MEANING: Failure to understand and obey this warning may result in injury to you or others. Whenever this symbol is used, please pay very close attention to the information presented, and make sure you fully understand. If you do not, contact your dealer or Harper Industries for clarifica-tion.

    151 E. HWY. 160 Harper, KS 67058(620) 896-7381 • Fax (620) 896-7129

    Toll Free 800-835-1042Email [email protected]

    Website www.deweze.com

    © 2019 Harper Industries, Inc.The Harper and DewEze names are registered trademarks of Harper Industries, Inc. All other brand and productnames are trade-

    marks or registered trademarks of their respective companies.

    1

  • S3

    Statement of Warranty

    Harper Industries, Inc. (HII) warrants to each purchaser of a new DewEze S3 from an authorized dealer or representative, that such equipment is free of manufacturer’s defects in workmanship and materials which appear while in normal service for a period of ONE YEAR commencing with delivery to the original user.

    The obligation of HII under this warranty is expressly limited, at our option, to replacement or repair at a service facility designated by Harper Industries or at the manufacturing plant in Harper, KS. A part will be replaced after inspection discloses it to have been defective. This warranty does not apply to defects caused by damage or unreasonable use (includ-ing failure to provide reasonable and necessary maintenance, or by performing functions without genuine DewEze S3 accessories) while in the possession of the consumer.

    Warranty is limited to parts, labor and ground freight delivery of replacement parts. HII shall not be liable for the consequential damages of any kind, including but not limited to consequential labor costs or transportation charges in connection with replacement or repair of defective parts.

    This warranty does not apply to parts subjected to misuse, abuse, alteration, improper or inadequate maintenance, or normal wear (including belts, chains, sickles).

    Harper Industries makes no warranty with respect to trade accessories. They are subject to the warranties of their respective manufacturers.

    ANY IMPLIED OR STATUTORY WARRANTIES, INCLUDING ANY WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. HII makes no other ex-press warranty, nor is anyone authorized to make any on behalf of HII.

    For further information please contact your nearest DewEze S3 dealer.

    RECORDSDate of Purchase ______ / ______ / ______

    Dealer’s Name _________________________________ Dealer’s Phone _________________________________ Serial Number Machine __________________________

    2 3

  • S3

    Table of ContentsOPERATOR SECTIONTo the Owner or Operator...............................................Warranty Statement........................................................Table of Contents............................................................Specifications..................................................................Safety Guidelines............................................................Set-Up Instructions.........................................................Operation Hydraulic Requirements................................... Loading Instructions.......................................... Feeding Instructions.........................................Adjustments Feed Rate......................................................... Flow Control Valve Adjustments.......................Maintenance Schedule....................................................

    PARTS SECTION Table and Feed Chain...................................... Trailer Assembly............................................... Backboard and Sides....................................... Safety Shields................................................... Sickle Height Adjustment.................................. Twine Box - Optional......................................... Decals...............................................................

    Sickle Drive Assembly...................................... PTO Kit............................................................. Hydraulic Option............................................... Hydraulic Option Schematic.............................

    3

    123456

    788

    89

    10

    1.11.21.31.41.51.61.7

    2.12.22.32.4

  • S3

    Specifications

    4 5

    Power Hydraulic or PTO poweredDimensions 91.63” H x 148” L x 119” W (in field position)Weight 2750 lbs. w/ trailerCutting Device 81” Sickle Bar - 27 individual sickle sections (knives)Shipping Width 91.63” H x 148” L 102.0” WTire Pressure 35 psi cold

    NOTE: Following publication of this manual, certain changes in standard equipment and options may have occurred which would not be included in these pages. Your Harper dealer is the best source for up-to-date information.

  • S3

    Safety Guidelines

    • Use genuine factory parts or parts with equivalent characteristics, includ- ing type, strength and material. Fail- ure to do so may result in product mal- function and possible injury to the op- erator and/or others.• If hardware is not secure, or if some of the hardware is over-tightened, equip- ment failure may result, posing poss- ible safety hazards.• To prevent possible eye injury, always wear SAFETY GLASSES while oper- ating equipment.• Replace locknuts and locking screws if you can tighten them without feeling considerable resistance for several turns before they are completely tight. Replace them with factory authorized parts or their equivalent.

    Guards & Shields• Keep all safety devices in place.• Replace all worn, damaged, unusable, missing or lost safety shields and guards before operating the equip- ment.• Keep the equipment in good operating condition.• Table safety stops have been provided by the manufacturer and we do not recommend removing them for any reason. See parts page 1.5.

    Safety Decals• If safety related or instructional decals become illegible or are removed, re- place them immediately. New decals may be obtained from your local Harp- er Dealer.• If you replace parts that have such decals attached to them, make sure the decals are replaced with current versions, and are on the replacement parts before the machine is operated again.

    HydraulicsTo prevent serious injury or death:• Relieve pressure on system before repairing, adjusting or disconnecting any hydraulic hose or fitting.• Wear proper hand and eye protection when searching for leaks.• Use wood or cardboard instead of hands when looking for leaks.• Keep all hoses, fittings and compo- nents in good operating condition.• Do not use any type of heat or flame (welding, soldering, cutting torch, etc.) near pressurized hydraulic lines.

    SAFETY WARNING!HIGH-PRESSURE FLUID HAZARD!Escaping fluid under pressure can pene-trate skin causing serious injury or death.

    5

  • S3

    Set-Up Instructions

    Your S3 is shipped from the factory in a “knocked-down” position to make it easier to transport. If it is necessary for you to trans-port your S3 you will again need to “knock it down” in order to get within the legal limits of most public roads. If transport is necessary or if you have received your machine in the “knocked-down” position follow the instruc-tions below to set it up correctly.

    1. Raise the backboard (1) into an up- right position and secure loosely with two 1/2” bolts (5) provided on each end. (See Fig. 1)

    2. Set sides (2) in place and fasten down with five 5/16” bolts (3) located on the table sides.

    3. Tighten top hold-down brackets (4). (See Fig. 1).

    4. Tighten four 1/2” bolts described in instruction 1 above.

    5. Slide table into feeding position (fig 3) and secure with bolts. The feeding position is marked on the underside of the table with bolt hole slots. The slots are located on the trailer on the angle iron rails the table is sitting on. The feeding position bolt hole slots are on the feed of the slicer. They are shown in figures 4 & 5.

    SAFETY WARNING!OPERATING THE S3 LIFTING ARM WITH THE TABLE IN THE ROAD/TRANSPORT POSITION WILL DO DAMAGE TO THE LIFT ARM LINKAGE!

    6 7

    Fig. 1

    1

    2

    3

    4

    5

    Fig. 2

    Fig. 3

    Feed Position

    Transport Position

  • S3

    Fig. 4

    Fig. 5

    For PTO machines we have installed a PTO stand for your convenience. It also contains key slots for your hydraulic hoses. The PTO shaft rests in the cutout on top of the stand and the hydraulic hoses insert into the key slots. When using S3, be sure PTO stand is in down (working) posi- tion. Do so by pulling pin and pushing down. Then reinstall pin.

    Operation

    NOTE: BEFORE OPERATING YOUR NEW S3 MAKE A COMPLETE INSPECTION OF ALL COMPONENTS TO INSURE THAT ALL THE NUTS AND BOLTS ARE TIGHT AND THAT NO DAMAGE HAS OCCURRED DUR-ING SHIPPING.

    HYDRAULIC REQUIREMENTSYour new DEWEZE S3 is designed to be used as a mobile feeding unit mounted on a trailer or as a stationary unit in a permanent installation. Regardless of the type of use the S3 WILL REQUIRE 15 GPM (gallons per minute) of hydraulic oil flow and a minimum of 1800 PSI (pounds per square inch) hy-draulic pressure to operate properly. Be sure that the hydraulic system you intend to use is functioning properly and that the oil is clean and of good quality.

    Two hydraulic remotes are required to oper-ate the trailer mounted S3. One is to control the lift arm for loading the bales and the other is to operate the slicer table. Each remote must be capable of reversible flow. You may want to mark the remotes to make sure that you hook up the hydraulics the same way each time you use the machine.

    NOTE: When using a hydraulically driven S3 III continuously (for more than 3 bales in 10 minutes) the following adjustments must be made to tractors equipped with a high flow, pressure compensated loadsense hydraulic system.

    7

    Pin

  • S3

    LOADING INSTRUCTIONS (Trailer Mounted Unit Only)

    Approach the bale on its right side with the lift arm lowered to the ground. Cradle the bale in the lift fork by moving forward so that the bale is against the back of the fork. Lift the bale all the way up so that the bale rolls onto the table slats. Move the bale toward the sickle by activating the feeder and stop as the bale reaches the sickle. To load and carry a second bale, repeat the above process and raise the second bale until it rests snuggly against the first.

    NOTE: Be sure to raise the lift arm to the upright position and latch the safety chain whenever you transport your S3 on the road!

    FEEDING INSTRUCTIONS

    To engage the feeding operation of the S3, idle the tractor engine, engage the slicer table hydraulics and increase the engine speed to the tractor manufacturer’s suggested rated speed. On a PTO slicer the PTO RPM is 540. To engage the PTO we recommend idling the engine, engaging the PTO then accelerating the tractor’s engine to rated speed for correct 540 PTO RPM operation.

    SAFETY WARNING!Stay clear of the table and cutter bar when the machine is in operation!

    If the system stalls, reverse the slats and try again. If stalling continues, increase the RPMs of the tractor about 10 percent.

    NOTE: Always wait until the first bale has been processed completely and the table slats have stopped before loading the second bale onto the table.

    8 9

    1. Flow (speed) must be controlled on the tractor remote outlet. To set this speed first set the Slicer flow as outlined in the manual. Secondly, turn the flow control toward the “turtle” on the tractor selective control outlet until the speed begins to decrease. Stop turning as soon as you can notice a decrease in speed. Failure to follow these procedures may result in the overheating of the tractor hydraulic system, as the system will be at maximum flow and pressure. (Load is sensed at the tractor selective control valve and if this valve is wide open the system is at constant maximum pressure / flow.

    2. The alternative to the above is to buy a “flow limiter valve” and attach it between the quick disconnect and the hose on the pressure side.

    3. On PTO model S3 III, flow must also be regulated at the selective control outlet for the slat motor.

    NOTE: If the above instructions are not fol-lowed, the following symptoms may develop:

    Rapid heating of the tractor hydraulic oil, this will show up as a loss of speed on the hydraulic motor speed. These motorsloseefficiencyrapidlywhenoil over heats.

  • S3

    NOTE: The backboard will slide up or down in relation to the sideboards without loosen-ing any other bolts. As shown in figure 1, arrow 1, on page 6.

    Suggestion: When adjusting the sickle and the backboard sliding with it, loosen the bolts and nuts shown in the Fig. 1, arrow 4 on page 6 . There are nuts, bolts, and straps on both the front and rear sides of the machine.

    3. Retighten the four 5/8” bolts loosened in step one on previous page.

    FLOW CONTROL VALVE ADJUSTMENT

    The flow control valve on the right controls the speed of the sickle. Loosen the knob on the valve to adjust the lever and move the le-ver to a higher number to increase the speed. To lower the number is to decrease speed. After moving the lever, tighten the knob to hold the lever in place.

    For initial setting of the valves, set each adjusting lever on “2”. Fine tune the speed of the sickle and slats by adjusting the valves individually to get the proper cutting for the type of hay you are processing.

    FEEDING RATE

    The feeding rate may be adjusted by chang-ing the speed of the feeder chain, or by adjusting the distance between the sickle and the table slats. To change this distance, use the following procedure.

    SAFETY WARNING!Turn off tractor and disconnect the hydrau-lic hoses before making any adjustments to the sickle! Failure to do so could result in serious personal injury!

    1. Loosen the two 5/8” hex bolts (1) and two 5/8” carriage bolts (2) that hold the sickle bar in place. (See Fig. 3)

    2. Screw the 3/4” all thread adjustment bolts (3) in or out at each end of the sickle. Make sure that each end is adjusted so that the sickle is parallel with the table slats. Use a tape measure to gauge each end.

    Adjustments

    9

    2

    3

    1

  • S3

    TRAILER MAINTENANCEMONTHLY (Or every 100 bales) Grease the linkage of the lift arm to avoid binding and rust.

    ANNUALLY Clean and repack the wheel bearings.

    TABLE MAINTENANCEMONTHLY (Or every 100 bales) Grease Shumacher gear box with MAX 5 shots of lithium based grease every 50 operating hours.

    Knife-head bearing should be greased every 12 operating hours with 1 shot of grease.

    Check the conveyor chain for tightness. The chain should not swag more than 6” from the bottom of the table at the center. Adjust the take-up roller equally at each end for maximum chain life.

    Take-up Roller

    Maintenance

    10

  • S311

    Lubricate the system drive chains with chain oil. - Non-detergent petroleum based or synthetic, multigrade 20/50 oil.

    Inspect Schumacher drive belt for stretching from normal wear, tighten belt as necessary. Inspect for unusual/excessive belt wear such as fraying, glazing, or other abnormalities, replace as necessary. part # 440081 - 25-30 lbs. of tension with 3/4” deflection between tensioner pulley and Schumacher pulley.

    Inspect sickle sections for wear, and replace as necessary.

    Remove lower Schumacher shield and remove excess hay from drive area.

    BI-ANNUALLY Check belt tension - 25-30 lbs. with 3/4” deflection between tensioner pulley and Schumacher pulley.

    DRIVE SHAFT MAINTENANCEMONTHLY (Or every 100 bales) Grease all grease zerks on the drive shaft. (Zerks located at each end and one in the middle of the shaft.)

    Inspect and replace any broken or missing safety shields. Check for loose bolts on drive shaft.

  • S3

  • S3

    PARTS SECTION

  • S3

  • S3

    Table of ContentsPARTS SECTION Table and Feed Chain...................................... Trailer Assembly............................................... Backboard and Sides....................................... Safety Shields................................................... Table Safety Stops........................................... Sickle Height Adjustment.................................. Twine Box - Optional......................................... Decals...............................................................

    Sickle Drive Assembly...................................... PTO Kit............................................................. Sickle Assy........................................................ PTO Holder....................................................... Hydraulic Hoses............................................... Hydraulic Option............................................... Hydraulic Option Schematic.............................

    1.11.21.31.41.51.61.71.8

    2.12.22.32.42.52.62.7

  • S31.1

    4050

    16Pa

    rts L

    ist

    ITEM

    QTY

    PAR

    T #

    DES

    CR

    IPTI

    ON

    15

    1104

    00BO

    LT, 3

    /8-1

    6 X

    2.0

    24

    1104

    02Bo

    lt, 3

    /8-1

    6 X

    1.25

    in C

    arria

    ge3

    411

    0419

    BO

    LT, 1

    /2-1

    3 X

    1.7

    54

    411

    0420

    BO

    LT, 3

    /8-1

    6 X

    1.0

    54

    1104

    25B

    OLT

    , 3/8

    -16

    X 1

    .25

    62

    1104

    29B

    OLT

    , 1/2

    -13

    X 1

    .57

    311

    0437

    BOLT

    , 3/8

    -16

    X 0

    .75,

    WIZ

    FLA

    NG

    E8

    126

    1105

    61B

    OLT

    , 1/4

    -20

    X .7

    59

    611

    0610

    NU

    T, 1

    /2-1

    310

    211

    0615

    NU

    T, 1

    /2-1

    3, U

    NIT

    OR

    QU

    E LO

    CK

    1112

    611

    0630

    NU

    T, 1

    /4-2

    0 LO

    CK

    (NYL

    ON

    INSE

    RT)

    121

    1106

    45N

    UT,

    3/8

    -16

    WIZ

    FLA

    NG

    E13

    211

    0658

    WAS

    HER

    , 1/2

    " FLA

    T ST

    AN

    DAR

    D14

    1611

    0672

    WA

    SHER

    , 3/8

    " LO

    CK

    1521

    1106

    76W

    ASH

    ER, 3

    /8" F

    LAT

    STA

    ND

    ARD

    1612

    1108

    26N

    UT,

    3/8

    -16

    GR

    517

    134

    0007

    Spr

    ocke

    t, 60

    30 X

    1.2

    518

    140

    0014

    DEC

    AL, S

    HIE

    LD R

    EMO

    VED

    191

    4050

    15as

    sem

    bly,

    driv

    e ch

    ain

    cove

    r20

    541

    0232

    Bear

    ing

    Inse

    rt, 2

    .83,

    1.2

    5" e

    c Lk

    Parts

    Lis

    tIT

    EMQ

    TYPA

    RT

    #D

    ESC

    RIP

    TIO

    N21

    841

    0233

    Flan

    ge, 2

    Hol

    e22

    441

    0238

    Key

    , 1/4

    X 1

    /4 X

    2.2

    523

    241

    0243

    BEAR

    ING

    , 2fn

    g Sd

    1.3

    7524

    241

    0281

    ADJU

    STM

    ENT

    BR

    AC

    KET

    ASS

    Y25

    141

    0365

    MO

    TOR

    AD

    J. P

    LATE

    261

    4103

    70Sh

    ield

    , Sla

    t Mot

    or27

    141

    0375

    SPR

    OC

    KET,

    60b

    10 X

    1.0

    281

    4104

    42C

    onne

    ctin

    g Li

    nk, #

    60 C

    hain

    293

    4111

    17C

    hain

    , Fee

    der

    3010

    4111

    35SL

    AT31

    141

    1137

    SHAF

    T, S

    LAT

    DR

    IVE

    323

    4111

    70H

    alf L

    ink,

    Offs

    et, 2

    060h

    331

    4111

    71W

    ELD

    MEN

    T, S

    LAT

    RO

    LLE

    R34

    241

    1294

    CEN

    TER

    BE

    AR

    ING

    MO

    UN

    T35

    1141

    5003

    Toot

    hed

    Slat

    361

    4150

    04W

    eldm

    ent,

    Tabl

    e37

    142

    0128

    Mot

    or, E

    aton

    101

    -101

    4 (1

    4.1

    CI)

    381

    4400

    34C

    hain

    , Sla

    t Driv

    e39

    344

    0070

    Spr

    ocke

    t,206

    2b13

    x1.2

    5k2s

    s,tim

    e40

    144

    0078

    DR

    IVE

    sha

    ft

    Tabl

    e an

    d fe

    ed c

    hain

    11/1

    3/19

  • S3ii 1.1

    DE

    TAIL

    HSC

    ALE

    0.1

    2 : 1

    4050

    16

    H

    37

    31

    30

    26

    7

    277

    2

    4

    20

    29

    39

    38

    1715

    4023

    23

    18

    28

    10

    6

    41

    24

    162215

    17

    1

    25

    34

    8

    1136

    1235

    16

    1

    21

    32

    40

    17

    1516

    522

    Add

    blu

    e lo

    ctite

    to s

    et s

    crew

    s an

    das

    not

    ed (1

    )

    14

    14

    21

    1

  • S3iii 1.1

    DET

    AIL

    ASC

    ALE

    0.1

    : 1

    DE

    TAIL

    BS

    CA

    LE .1

    :1D

    ETA

    IL C

    SCA

    LE 0

    .1 :

    1

    DET

    AIL

    DS

    CA

    LE 0

    .1 :

    1

    4050

    16

    A

    B

    C

    D

    18

    323

    9

  • S3iv 1.1

    DE

    TAIL

    AS

    CAL

    E 1

    / 10

    DE

    TAIL

    BS

    CA

    LE 1

    / 10

    4050

    16

    AB

    3

    9

    913

  • S31.2

    DET

    AIL

    ASC

    ALE

    0.06

    : 1

    A

    27

    25

    15

    2616

    12

    26

    9

    4

    7

    13

    17

    8

    10

    11

    2223

    24

    19

    14

    18

    Trai

    ler a

    ssem

    bly

    and

    parts

    11/1

    8/20

    19

    20.2

    .1.1

    21.2

    8.4

    21.2

    8.2

    21.2

    8.1

    21.2

    8.7

    21.2

    8.8

    21.2

    8.3

    20.2

    .1.3

    20.2

    .1.4

    21.2

    8.5

    20.2

    .1.2

    15

    28

  • S3ii 1.2

    Parts

    Lis

    tIT

    EMQ

    TYPA

    RT

    #D

    ESC

    RIP

    TIO

    N1

    510

    2009

    Cov

    er P

    late

    25

    1020

    10C

    lam

    p Bo

    dy3

    411

    0323

    Bol

    t, 1/

    4-20

    X1

    3/8

    49

    1104

    19BO

    LT, 1

    /2-1

    3 X

    1.75

    51

    1104

    91BO

    LT, 5

    /16-

    18 X

    2.7

    56

    911

    0610

    NU

    T, 1

    /2-1

    37

    911

    0658

    WA

    SHER

    , 1/2

    " FLA

    T ST

    AND

    ARD

    82

    1106

    64W

    ASH

    ER, 1

    " FLA

    T SA

    E9

    911

    0666

    WA

    SHER

    , 1/2

    " LO

    CK

    102

    1106

    73W

    ASH

    ER, 1

    /4" F

    LAT

    STA

    ND

    ARD

    111

    1520

    04H

    OLD

    ER

    , MAN

    UAL

    122

    2000

    06D

    ECAL

    , DEW

    EZE

    RE

    D O

    N M

    ETA

    LIC

    131

    4100

    22PI

    N, S

    WIN

    G A

    RM

    141

    4100

    26O

    UTE

    R F

    OR

    K A

    SSY

    152

    4100

    37W

    ELD

    MEN

    T, P

    IN16

    141

    0069

    PIN

    , OU

    TTE

    R F

    OR

    K17

    141

    0176

    PIN

    , CYL

    BA

    SE

    181

    4103

    99BA

    LE K

    ICKE

    R A

    SSY

    191

    4107

    15B

    ASIC

    FO

    RK

    ASSY

    , SLI

    CER

    ON

    LY20

    141

    1159

    Wel

    dmen

    t, Tr

    aile

    r, S3

    Parts

    Lis

    tIT

    EMQ

    TYPA

    RT

    #D

    ESC

    RIP

    TIO

    N20

    .2.1

    .12

    4100

    40S

    PIN

    DLE

    - 35

    -6LM

    -S20

    .2.1

    .22

    5101

    75C

    OTT

    ER P

    IN, 3

    /16

    X 2

    20.2

    .1.3

    211

    0654

    Was

    her,

    1.75

    X .8

    15 S

    pind

    le20

    .2.1

    .42

    1106

    13N

    UT,

    CA

    STLE

    3/4

    -16

    212

    4130

    01H

    UB

    CO

    MP

    LETE

    , 35-

    6LM

    21.2

    8.1

    141

    0111

    Hub

    6X6

    in21

    .28.

    21

    4101

    04/4

    101

    14IN

    NER

    RAC

    E AN

    D B

    EAR

    ING

    21.2

    8.3

    141

    0103

    /410

    115

    OU

    TER

    RA

    CE

    AND

    BEA

    RIN

    G

    21.2

    8.4

    141

    0105

    SEA

    L21

    .28.

    51

    4101

    12D

    UST

    CAP

    21.2

    8.7

    611

    3006

    Stud

    9/1

    6-18

    21.2

    8.8

    611

    3007

    Nut

    9/1

    6-18

    222

    4200

    05C

    OU

    PLER

    , PIO

    NEE

    R M

    ALE

    231

    4200

    06H

    OSE

    , .37

    X 2

    06.4

    8 6

    MB/

    6-8M

    P24

    142

    0011

    Hos

    e .3

    7 X

    224.

    48 6

    mb/

    6-8m

    p25

    142

    0014

    CYL

    IND

    ER 4

    .0 X

    18

    265

    5101

    75C

    OTT

    ER P

    IN, 3

    /16

    X 2

    272

    7105

    86SC

    REW

    , 1/4

    X 1

    TEK

    SE

    LF-T

    AP28

    182

    0097

    CLA

    MP

    BO

    DY

    Trai

    ler p

    arts

    list

    11/1

    8/20

    19

  • S31.3

    Parts

    Lis

    tD

    ESC

    RIP

    TIO

    NPA

    RT

    #Q

    TYIT

    EMBO

    LT, 3

    /8-1

    6 X

    1.25

    1104

    2512

    1W

    ASH

    ER, 3

    /8" L

    OC

    K11

    0672

    122

    WAS

    HER

    , 3/8

    " FLA

    T ST

    AND

    ARD

    1106

    7612

    3N

    UT,

    3/8

    -16

    GR

    511

    0826

    124

    Side

    , fro

    nt, a

    ssem

    bly

    4050

    081

    5S

    IDE,

    RIG

    HT/

    BAC

    K41

    0076

    16

    BAC

    KBO

    ARD

    ASS

    EMBL

    Y41

    0196

    17

    Back

    boar

    d an

    d si

    des

    1

    34

    2

    6

    7

    11/2

    1/20

    19

    5

  • S31.4

    DET

    AIL

    ASC

    ALE

    0.06

    : 1

    DET

    AIL

    BSC

    ALE

    0.08

    : 1

    Parts

    Lis

    tD

    ESC

    RIP

    TIO

    NPA

    RT

    #Q

    TYIT

    EMC

    LIP,

    HAI

    RPI

    N21

    0326

    21

    Shie

    ld, b

    elt,

    com

    plet

    e40

    5005

    12

    Shie

    ld, b

    elt,

    door

    com

    plet

    e40

    5006

    13

    Shie

    ld, b

    elt,

    mov

    ing,

    com

    plet

    e40

    5007

    14

    A

    B

    SAFE

    TY S

    HIE

    LDS

    11/1

    3/20

    19

    2 3

    4Oth

    er s

    hiel

    ds s

    how

    n w

    ith th

    eir r

    espe

    ctiv

    e di

    agra

    ms

    2

    4

    3

    1

    2103

    26 c

    lip in

    stal

    led

    here

  • S3

    DET

    AIL

    ASC

    ALE

    1 / 5

    DET

    AIL

    BSC

    ALE

    1 / 5

    A

    B

    Parts

    Lis

    tD

    ESC

    RIP

    TIO

    NPA

    RT

    #Q

    TYIT

    EMBO

    LT, 1

    /2-1

    3 X

    1.25

    1104

    422

    1N

    UT,

    1/2

    -13

    1106

    104

    2Ta

    ble,

    com

    plet

    e41

    5007

    13

    Trai

    ler C

    ompl

    ete

    4150

    101

    4

    11/1

    9/20

    19Ta

    ble

    safe

    ty s

    tops

    2

    1

    2

    1

    2

    2

    4

    3

    1.5

  • S31.6

    DET

    AIL

    ASC

    ALE

    1 / 1

    0 DET

    AIL

    BSC

    ALE

    1 / 1

    0

    DET

    AIL

    CSC

    ALE

    1 / 1

    0

    A

    B

    C

    Sick

    le H

    eigh

    t Adj

    ustm

    ent

    11/1

    3/20

    19

    Loos

    en n

    uts

    on o

    ppos

    ite s

    ide

    Use

    jack

    scr

    ewfo

    r adj

    ustm

    ent

    Loos

    en fo

    r adj

    ustm

    ent

    jack

    scr

    ew

    jack

    scr

    ew

  • S31.7

    Part

    s Li

    st

    DES

    CRIP

    TIO

    NPA

    RT #

    QTY

    ITEM

    BOLT

    , 3/8

    -16

    X 1.

    011

    0420

    41

    NU

    T, 3

    /8-1

    6, U

    NIT

    ORQ

    UE

    LOCK

    1106

    214

    2

    WA

    SHER

    , 3/8

    " FLA

    T ST

    AN

    DA

    RD11

    0676

    83

    PUSH

    NU

    T, W

    ASH

    ER C

    AP

    STYL

    E11

    2011

    34

    CLEV

    IS P

    IN, S

    TD Z

    P 1/

    4 X

    1 5/

    811

    2095

    35

    wel

    dmen

    t, ne

    t wra

    p bo

    x, b

    otto

    m41

    5008

    16

    SCRE

    W, 1

    0-24

    X1.2

    5 PA

    N H

    EAD

    PH

    PS11

    0339

    16.

    1

    NU

    T, 1

    0-24

    LO

    CK N

    YLO

    N IN

    SERT

    1106

    311

    6.2

    Keep

    er, D

    raw

    Lat

    ch11

    2106

    16.

    3

    bott

    om, n

    et w

    rap

    box,

    S3

    4115

    451

    6.4

    fron

    t, ne

    t wra

    p bo

    x, S

    341

    1546

    16.

    5

    wel

    dmen

    t, ne

    t wra

    p bo

    x lid

    4150

    091

    7

    SCRE

    W, 1

    0-24

    X1.2

    5 PA

    N H

    EAD

    PH

    PS11

    0339

    27.

    1

    NU

    T, 1

    0-24

    LO

    CK N

    YLO

    N IN

    SERT

    1106

    312

    7.2

    LATC

    H, R

    UBB

    ER T

    -HA

    ND

    LE D

    RAW

    1121

    051

    7.3

    lid, n

    et w

    rap

    box,

    S3

    4115

    471

    7.4

    7.3

    6.1

    6.2

    6.3

    6.5

    57.

    4

    2

    31

    7.1 4

    6.4

    7.4

    7.2

    OPT

    ION

    AL

    TWIN

    E BO

    X

  • S3

  • S31.8

    Parts

    Lis

    tD

    ESC

    RIP

    TIO

    NPA

    RT

    #Q

    TYIT

    EMD

    ecal

    , Dew

    eze

    Red

    on

    Blac

    k20

    0005

    31

    Dec

    al, D

    ange

    r Mov

    ing

    Sic

    kle

    4000

    124

    2D

    ECAL

    , SH

    IELD

    REM

    OV

    ED40

    0014

    23

    S3 d

    ecal

    4000

    933

    4Su

    per S

    licer

    (sm

    all)

    deca

    l40

    0094

    35

    S3 s

    traig

    ht s

    tripe

    4000

    952

    6S3

    sca

    llope

    d st

    ripe

    deca

    l40

    0096

    27

    DEC

    ALS

    AND

    SAF

    ETY

    DEC

    ALS

    7

    45

    6

    2

    3

    45 11

    /13/

    2019

    11

    Oth

    er s

    afet

    y de

    cals

    sho

    wn

    with

    thei

    r res

    pect

    ive

    diag

    ram

    s

  • S3ii 1.8

    2.62

    5

    20.9

    61

    2.62

    5

    22.8

    96

    .342

    .342

    6.20

    0

    6.20

    0

    24.0

    0024

    .000

    26.9

    23

    28.8

    75

    DEC

    AL P

    LAC

    EMEN

    T11

    /13/

    19

  • S32.1

    Part

    s Li

    st

    DES

    CRI

    PTIO

    NPA

    RT #

    QTY

    ITEM

    BOLT

    , 1/2

    -13

    X 2.

    511

    0403

    31

    BOLT

    , 1/2

    -13

    X 1.

    7511

    0419

    42

    BOLT

    , 5/8

    -11

    X 3.

    7511

    0510

    13

    NU

    T, 1

    /2-1

    3 W

    IZ F

    LAN

    GE

    1105

    888

    4

    NU

    T, 1

    /2-1

    311

    0610

    35

    WA

    SHER

    , 1/2

    " FLA

    T ST

    AN

    DA

    RD11

    0658

    106

    WA

    SHER

    , 5/8

    " FLA

    T SA

    E11

    0663

    27

    WA

    SHER

    , 1/2

    INT.

    TO

    OTH

    LO

    CK11

    1172

    48

    Schu

    mac

    her P

    ro D

    rive

    4400

    721

    9

    pulle

    y 18

    0mm

    dia

    met

    er44

    0073

    110

    QD

    SF

    1 3/

    8" d

    rive

    bush

    ing

    4400

    791

    11

    1 C

    85 S

    F44

    0080

    112

    pulle

    y, 6

    inch

    , Don

    Dye

    4420

    061

    13

    Belt,

    C11

    544

    0081

    114

    Sick

    le D

    rive

    Ass

    embl

    y11

    /13/

    2019

    5 6

    1

    2

    73

    910

    13

    14

    1112

    This

    dia

    gram

    cov

    ers

    the

    basi

    c dr

    ive

    asse

    mbl

    yfo

    r bot

    h hy

    drau

    lic a

    nd P

    TO S

    licer

    s

    4

    8

  • S32.2

    Parts

    Lis

    tD

    ESC

    RIP

    TIO

    NPA

    RT

    #Q

    TYIT

    EMSe

    tScr

    ew, 3

    /8-1

    6 X

    0.7

    511

    0325

    21

    BOLT

    , M6x

    1 x

    45, G

    r 8.8

    1111

    834

    2N

    ut, M

    6 x

    1, T

    op L

    ock

    1111

    844

    3KE

    Y 5/

    16" X

    5/1

    6" X

    1 1

    /4"

    4103

    891

    4PT

    O s

    haft,

    CV

    4430

    021

    5

    4

    2

    3

    5

    PTO

    kit

    12/2

    0/19

    Wei

    ght:

    11.5

    7 lb

    mas

    s

    1

    Parts

    2 a

    nd 3

    can

    be

    foun

    d on

    the

    right

    sid

    e of

    the

    Schu

    mac

    her g

    ear b

    ox m

    ount

    ass

    embl

    y

  • S32.3

    DET

    AIL

    ASC

    ALE

    0.16

    : 1

    DET

    AIL

    BSC

    ALE

    0.08

    : 1

    4050

    12

    A

    B

    12.1

    .512

    .3

    12.2

    12.1

    .2

    7.2

    7.1

    11

    65

    102

    4

    3

    Sick

    le A

    ssem

    bly

    11/2

    0/19

    1

    6

    1389

    2

    4

    3

    12.1

    .1

    12.1

    .3

    12.1

    .4

  • S3ii 2.3

    Par

    ts L

    ist

    ITE

    MQ

    TYP

    AR

    T #

    DE

    SCR

    IPTI

    ON

    120

    1100

    54B

    olt,

    7/16

    -14

    X 2

    .5 in

    Car

    riage

    26

    1105

    35B

    OLT

    , 7/1

    6-14

    X 1

    .53

    2611

    0641

    NU

    T, 7

    /16-

    144

    2611

    0671

    WA

    SH

    ER

    , 7/1

    6" L

    OC

    K5

    140

    0014

    DEC

    AL,

    SH

    IELD

    RE

    MO

    VE

    D6

    2340

    0031

    Stu

    b G

    uard

    , Sup

    er S

    licer

    II7

    140

    5013

    asse

    mbl

    y, s

    ickl

    e en

    d co

    ver

    7.1

    141

    1542

    shie

    ld, s

    ickl

    e en

    d pl

    ate

    7.2

    150

    0038

    Dec

    al, D

    ange

    r Kee

    p C

    over

    s In

    Pla

    ce8

    941

    0710

    PLA

    TE, S

    TUB

    GU

    AR

    D A

    DJ.

    910

    4107

    11S

    HIM

    , STU

    B G

    UA

    RD

    101

    4115

    39P

    late

    , not

    ched

    stu

    b gu

    ard,

    adj

    Par

    ts L

    ist

    ITE

    MQ

    TYP

    AR

    T #

    DE

    SC

    RIP

    TIO

    N11

    141

    5005

    Wel

    dmen

    t, S

    ickl

    e m

    ount

    , S3

    121

    4400

    77co

    mpl

    ete,

    sic

    kle

    assy

    12.1

    144

    0076

    sick

    le, a

    ssy,

    S3

    12.1

    .11

    4101

    92S

    ickl

    e B

    ar12

    .1.2

    2741

    0193

    Sic

    kle

    Sec

    tion,

    3"

    12.1

    .354

    1106

    30N

    UT,

    1/4

    -20

    LOC

    K (N

    YLO

    N IN

    SE

    RT)

    12.1

    .443

    1105

    61B

    OLT

    , 1/4

    -20

    X .7

    512

    .1.5

    1111

    0430

    BO

    LT, 1

    /4-2

    0 X

    1-1

    /412

    .21

    4420

    04S

    chum

    ache

    r sic

    kle

    conn

    ecto

    r12

    .31

    4420

    05S

    chum

    ache

    r nyl

    on b

    ushi

    ng13

    2051

    0161

    SetS

    crew

    , 3/8

    -16

    X 0

    .5

    Sic

    kle

    parts

    list

    11/2

    0/19

  • S32.4

    PTO

    HO

    LDER

    Part

    s Li

    st

    DES

    CRIP

    TIO

    NPA

    RT #

    QTY

    ITEM

    Pin,

    Lin

    ch, .

    25 X

    3.0

    1021

    291

    1

    BOLT

    , U, S

    QU

    ARE

    3/8

    X 4

    X 4

    3/4

    1103

    631

    2

    BOLT

    , 5/1

    6-18

    X 3

    .25

    1105

    362

    3

    NU

    T, 5

    /16-

    18, U

    NIT

    ORQ

    UE

    LOCK

    1106

    002

    4

    PTO

    sha

    ft h

    olde

    r41

    1557

    15

    Base

    , PTO

    hol

    der,

    right

    4115

    581

    6

    Base

    , PTO

    hol

    der,

    left

    4115

    591

    7

    This

    sid

    e to

    war

    d to

    ngue

    of m

    achi

    ne

    5 Wei

    ght:

    3.41

    lbm

    ass

    3

    2

    1

    6

    4

    7

    3/8

    nut p

    rovi

    ded

    with

    110

    363

    U b

    olt

  • S32.5

    DET

    AIL

    ASC

    ALE

    0.10

    : 1

    DET

    AIL

    BSC

    ALE

    0.08

    : 1

    A

    B

    Parts

    Lis

    tD

    ESC

    RIP

    TIO

    NPA

    RT

    #Q

    TYIT

    EMH

    ose

    .5 X

    99.

    2 8-

    10fjx

    /8-8

    mp

    4201

    372

    1H

    ose

    .500

    X 7

    1.78

    8-1

    0fjx

    /8-1

    0fjx

    4201

    431

    2H

    ose

    .5 X

    87.

    28 8

    -10f

    jx/8

    -10f

    jx42

    0144

    13

    valv

    e, fl

    ow c

    ontro

    l,-10

    SAE

    (FC

    R51

    -10-

    2600

    )42

    0147

    14

    Hyd

    raul

    ic h

    oses

    Seco

    ndar

    y hy

    drau

    lic fl

    ow c

    ontro

    lva

    lve

    inst

    alle

    d he

    re o

    n hy

    drau

    lic s

    licer

    11

    32

    11/2

    0/19

    23

    End

    of #

    2 ho

    se in

    stal

    led

    here

    on P

    TO s

    licer

    End

    of #

    3 ho

    sein

    stal

    led

    here

    on P

    TO s

    licer

    Hyd

    raul

    ic k

    it di

    agra

    m p

    rovi

    ded

    on h

    ydra

    ulic

    opt

    ion

    page

    Hyd

    raul

    ic k

    it: #

    4250

    01

  • S32.6

    DET

    AIL

    ASC

    ALE

    1 / 5

    Parts

    Lis

    tD

    ESC

    RIP

    TIO

    NPA

    RT

    #Q

    TYIT

    EMBO

    LT, 5

    /16-

    18 X

    1-1

    /211

    0377

    21

    BOLT

    , 1/4

    -20

    X 2.

    511

    0410

    22

    BOLT

    , 3/8

    -16

    X 1.

    011

    0420

    63

    NU

    T, 5

    /16-

    1811

    0608

    24

    NU

    T, 1

    /4-2

    011

    0609

    25

    WA

    SHER

    , 1/4

    " LO

    CK

    1106

    672

    6W

    ASH

    ER, 3

    /8" L

    OC

    K11

    0672

    67

    WA

    SHER

    , 5/1

    6" L

    OC

    K11

    0674

    28

    NU

    T, 3

    /8-1

    6 G

    R 5

    1108

    262

    9AD

    APT

    ER

    , 10M

    J-10

    FJX9

    012

    0217

    210

    ADA

    PTE

    R, 1

    0MJ-

    10M

    B90

    1202

    243

    11AD

    APT

    ER

    , 10M

    J-10

    MB

    1202

    512

    12A

    DAP

    TER

    , 10M

    J-10

    MJ-

    10M

    B12

    0258

    113

    ADA

    PTE

    R, 1

    0MJ-

    10FJ

    X45

    1207

    301

    14C

    oupl

    er, S

    proc

    ket,

    flex,

    1" K

    ss41

    0229

    115

    Cha

    in, M

    otor

    Driv

    e C

    oupl

    er41

    0230

    116

    Cou

    pler

    , Spr

    ocke

    t, fle

    x, 1

    3/8

    K41

    0262

    117

    KEY

    5/16

    " X 5

    /16"

    X 1

    1/4

    "41

    0389

    118

    Con

    nect

    ing

    Link

    , #60

    Cha

    in41

    0442

    119

    Mou

    nt p

    late

    , Hyd

    raul

    ic b

    elt d

    rive

    mot

    or, S

    341

    1540

    120

    brac

    ket,

    hydr

    aulic

    val

    ve41

    1549

    121

    Mot

    or, S

    chum

    ache

    r Driv

    e 10

    1-10

    11-0

    0942

    0139

    122

    Hos

    e .5

    X 2

    7.28

    8-1

    0fjx

    /8-1

    0fjx

    4201

    401

    23H

    ose

    .5 X

    21.

    28 8

    -10f

    jx/8

    -10f

    jx42

    0141

    124

    Hos

    e .5

    X 1

    0.78

    8-1

    0fjx

    /8-1

    0fjx

    4201

    421

    25va

    lve,

    flow

    con

    trol,-

    10 S

    AE(F

    CR

    51-1

    0-26

    00)

    4201

    471

    26

    A

    14

    21

    2

    3

    22

    13

    10

    25

    2423

    20

    22

    20

    16

    1

    17 21 25

    84

    56

    19

    Hyd

    raul

    ic o

    ptio

    n11

    /19/

    2019

    11

    12

    11

    127

    9

    15

    26

    18

    2.7

  • S3

    Sick

    lem

    otor

    Tabl

    em

    otor

    IN

    CF

    EX

    IN

    CF

    EX

    From

    trac

    tor

    to s

    licer

    From

    slic

    erto

    trac

    tor

    Hyd

    raul

    ic o

    ptio

    n sc

    hem

    atic

    11/1

    9/20

    19

    4201

    41

    4201

    40

    4201

    42

    4201

    43

    4201

    44

    4200

    48

    4201

    3942

    0128

    1202

    58

    1202

    58

    4201

    37

    4201

    37

    2.7

  • S3

    NOTES

    Harper Industries, Inc.151 E. Highway 160Harper, KS 67058

    Website: www.harperindustries.com

    Telephone: 620-896-7381Toll-Free: 800-835-1042Fax: 620-896-7129

    E-mail: [email protected]